Used Schaffer 470 T for sale (15,398)

Condition: used, 8 pieces - Tugger train tug STILL - Electric tug STILL type CX T Year of construction all around 2010 or younger Batteries from 2010 to 2017 Plus a charger Scope of delivery for the offer price: 8 STILL type CX T electric tractors Each tractor has a built-in battery. 1 charger Dkjlq Sqst H Tzls Nhol All devices work One battery is defective, therefore one device does not work. Technical data: Tensile load: max. 4000 kg Rated drive power: 3 kW Battery voltage: 24 volts Unladen weight per tractor: 740 kg Battery weight per tractor: 382 kg Complete weight per tractor: 1120 kg Only the 8 tugs are offered in this offer, Tugger train trailer - Liftrunner - STILL tugger train under stock no. 61103

Condition: ready for operation (used), Year of construction: 2002, Functionality: fully functional, travel distance X-axis: 880 mm, travel distance Y-axis: 630 mm, travel distance Z-axis: 630 mm, table load: 600 kg, spindle speed (max.): 12,000 rpm, number of slots in tool magazine: 32, TECHNICAL DETAILS X-axis travel: 880 mm Y-axis travel: 630 mm Z-axis travel: 630 mm B-axis: present Control Control type: HEIDENHAIN TNC 426M Spindle Maximum spindle speed: 12,000 rpm Tool holder: SK40 Tool changer Number of places in the tool changer: 32 (2 x 16) Maximum tool diameter magazine 1 / 2: 130 mm / 80 mm Maximum tool length: 315 mm Maximum tool weight: 8 kg Total weight of tools: 160 kg Table Dkjljvt Swieq Sq Nhjl Clamping surface: 1,250 x 700 mm Maximum table load: 600 kg Table distance T-slots: 663 mm Number of T-slots / size: 10/14 H12 and 1/14 H7 Accuracy XYZ axis resolution: 0.001 mm Position tolerance: 0.010 mm

Condition: ready for operation (used), Year of construction: 2008, Functionality: fully functional, travel distance X-axis: 1,100 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 610 mm, workpiece weight (max.): 100 kg, number of slots in tool magazine: 30, TECHNICAL DETAILS X-axis travel: 1,100 mm Y-axis travel: 610 mm Z-axis travel: 610 mm Dkslq Sevt Sr Teq Nhol Table dimensions Table dimensions (L x W): 1,250 x 610 mm Tool system Holder: SK40 Number of places in the tool changer: 30 Rotary table Table diameter: Ø 250 mm Table height for horizontal installation: 300 mm Centering height for vertical installation: 225 mm Total height: 363 mm Centering hole diameter: Ø 100 mm Through hole diameter: Ø 70 mm Hydraulic pressure: (35.7 kgf/cm²) Rotation axis: 900 Nm (91.8 kgf m) Swivel axis: 1,200 Nm (122.4 kgf m) Maximum workpiece diameter: Ø 250 mm Permissible workpiece mass: Horizontal 100 kg / Swiveling 60 kg Permissible moment of inertia: 0.78 kg m² (8.0 kgf cm s²) Rotational speed of rotation axis: 33.3 min⁻¹ Rotational speed of swivel axis: 16.6 min⁻¹ Mass of the rotary table: approx. 260 kg

Year of construction: 2001, Condition: used, max. wheel diameter 40 - 160 mm gear width 90 mm control Siemens Sinumeric voltage 400 V frequency 50 Hz Dolsmld Nmjq Sq Nhskl connected load 34 kVA loading 800 Euro

Condition: excellent (used), mileage: 28,919 km, power: 338 kW (459.55 HP), fuel type: diesel, color: red, axle configuration: 10x4, fuel: diesel, wheelbase: 5,100 mm, brakes: engine braking, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, Year of construction: 2015, operating hours: 1,219 h, Equipment: ABS, air conditioning, cruise control, navigation system, parking heater, sleeping cabin, soot filter, spoiler, = More options and accessories = - Aluminium fuel tank - Brake booster - Roof spoiler - Electric windows - Electrically adjustable exterior mirrors - High beam - Low noise - Speed limiter - Air suspension - Air horn - Fog lights - Particle filter - Radio/cassette player - Reversing camera - Sleeping cabin - Sideskirts - Sunshade - Stability control - Auxiliary heating - Toolbox - Xenon lighting - Power take-off (PTO) - Central lubrication - Central locking = More information = General information Year of manufacture: Nov. 2015 Cab: FM Drivetrain Fuel tank: 500 liters Transmission Transmission: I SHIFT, automatic Axle configuration Front axle 1: Steered Front axle 2: Steered Rear axle 1: Dual tires Rear axle 2: Double tires Rear axle 3: Steered Functional Mast: Telescopic Mast length: 42 m Lifting capacity: 70,000 kg Crane: ERKIN WORLD POWER ER 2070 4.1 CRANE, year of manufacture 2015, behind the cabin Brand of the body: ERKIN WORLD POWER ER 2070 T-4.1 CRANE Dksleuu Dhleq Sq Nhel CE marking: yes Condition Technical condition: very good Visual condition: very good

Condition: used, Year of construction: 1988, x-travel 800 mm y-travel 450 mm z-travel 500 mm Control CNC 332 / TNC 355 total power requirement 5,5 kW weight of the machine ca. 4 t dimensions of the machine ca. ca. 3 x 3 x 2,5 m No. 2213 Universal tool milling machine MAHO MH 800 T Working area: 800 x 450 x 500 (800 longitudinal / 450 vertical / 500 transverse) Drive: 5.5 kW Control: Heidenhain CNC 332 / TNC 355 Universal built-in rotary table Coolant device Chip tray Splash guard half cabin, tool clamp Technical documentation Djlq Sqjuynixj Nhokl Tool holder ISO 40, Table clamping surface 600 x 900 m, max. table load 500 kg, quill stroke 80 mm Speed range 63 - 3150 rpm Feed rate 1 - 1500 mm/min Rapid traverse: 4.5 m/min Weight: approx. 4 tons

Condition: used, mileage: 628,696 km, power: 353 kW (479.95 HP), first registration: 09/2016, overall weight: 18,000 kg, fuel type: diesel, color: white, axle configuration: 4x2, wheelbase: 3,800 mm, driver cabin: other, gearing type: automatic, emission class: euro6, suspension: steel-air, Equipment: air conditioning, cruise control, differential lock, parking heater, Permissible total weight: 18000kg, Seats Fabric, Air leaf spring suspension, Intarder, Digital tachograph, Fifth wheel coupling: Jost, Electronic brake system EBS, Brake assistant, Electronic stability program ESP, Adaptive cruise control, Independent heating/automatic pre-selection, Comfortable front seats, Pneumatic front seats, Driver's armrest, Heated front seats, Headlight cleaning system, Radio/CD, Preparation for Bluetooth mobile phone, Lane keeping warning, Parking assistance, Multifunction steering wheel, Front lumbar supports, Electric windows, Roof spoiler, Fog lights, Electric rear view mirrors and heated, Immobilizer, Central locking, Tinted glass, Rear differential lock, Underrun protection: Front, Sun visor, Twin tires, Fire extinguisher holder, Spare wheel, Axle load indicator, Hill start control, LED daytime running lights, 2x7 pin plug connection, Hub roof, Speed limiter, Emergency brake assistant, Cab suspension, TRACTOR TRACTOR STATIC CLIMATE WEBASTO INTARDER Delq Sevw Ei Hjq Nhjkl

Condition: like new (used), Year of construction: 2008, amount 1 STK Dkslq Sqjul Elge Nhel

Condition: excellent (used), Year of construction: 2014, Functionality: fully functional, clamping force: 1 kN, screw diameter: 45 mm, injection weight: 291 g, ARBURG injection molding machine160 T Reference : 520S 1600-800 Year : September 2014 Screw diameter [mm]: 45 Injectable weight [g]: 291 Injection pressure [bar]: 2470 Clamping force [kN]: 1600 Distance between tie bar [mm]: 520x520 Platen dimensions[mm]: 688x688 Dkslq Seu Iyqdeq Nhsl Minimum high of the mold [mm]: 250 Controle unit reference : Selogica Power install [kW]: 74 Dimensions [m]: 5.20x1.95 Weight [kg]: 6350

Condition: used, Year of construction: 2012, Fully Automated 4-Clamp PUR Perfect Binder from HORIZON Our offer includes: - Horizon BQ-470 - Horizon Blast-Pipe-System D, PUR hotmelt system including 2 kg pre-melter This versatile perfect binder is excellently suited for medium and small print runs as well as single-copy productions. Ideal for the production of photo books, softcover, or hardcover books. Key Features: - Strong and Flexible Bindings: PUR hotmelt provides especially strong and flexible bindings, ideal for digital prints and coated papers. - Q-Jet nozzle application system for PUR hotmelt spine gluing - Consistent Adhesive Supply: The integrated pre-melter ensures a consistent supply and temperature of the adhesive. - Separate Side Gluing: Separate side gluing unit for EVA hotmelt. - Precise Scoring: 4-line positive/negative scoring and 2-line scoring with variable gauze feed for better binding quality. - User-Friendly Touchscreen: Easy-to-use 10.4-inch color touchscreen allows even less experienced operators to create high-quality bindings. - Advanced Feeding System: Advanced rotating suction feeding system speeds up production by handling various cover materials without marking them. Specifications: Performance and Capacity: - Maximum Speed: 800 cycles/hour - Binding Capacity with 2kg PUR (A4 size): Approx. 6,500 books with 2mm spine thickness and 0.5mm adhesive layer Approx. 650 books with 20mm spine thickness and 0.5mm adhesive layer Material Handling: - Book Block Size: Max. 320 x 320 mm, Min. 145 x 105 mm - Book Thickness: 1 to 65 mm - Cover Size: Max. 320 x 660 mm, Min. 135 x 225 mm - Paper Weight (Content): 60-135g/m² - Paper Weight (Cover): 80-300g/m² (normal paper), 104.7-348.9g/m² (coated paper) - Cover Stack Height: Max. 150mm Gluing: - PUR Hotmelt: 2kg cartridge (foil bag, Ø 126mm) for spine gluing - EVA Hotmelt: For side gluing - Temperature: PUR up to 130°C; EVA 120-200°C - Heating Time: Approx. 50 min Technical Requirements: - Compressed Air: 6 bar dry air (max. 8 bar); connection G1/8" - Power Supply: 400V three-phase 16A, 6.5kW for binder and 400V three-phase 16A, 6.0kW for melter Total Weight: 2,196kg Dkolqju Srr Ue Sq Nhel 3 MONTHS WARRANTY We guarantee that the machine operates perfectly and we take responsibility for 3 months. Even after this period, we are always there for you and support you in solving any problems. All-Inclusive Service Package We take care of everything: from secure packaging and transportation to customs clearance. Upon request, we can also provide a customized leasing offer. Sustainable and Economical Choose a used machine and benefit twice: Save the environment and your budget. Despite possible signs of use, you receive a quality product at an attractive price.

Condition: used, Functionality: fully functional, Year of construction: 2013, operating hours: 7,493 h, load capacity: 3,000 kg, lifting height: 6,455 mm, free lift: 2,074 mm, mast type: triplex, construction height: 2,841 mm, fork carriage width: 1,300 mm, fork length: 1,200 mm, engine type: VW 4 Zylinder BEF, drive type: Treibgas, LPG forklift Load center of gravity: 500 ISO class: ISO class 3 = 2,500 - 4,999 kg Mast type: Triplex Dkelq Sq Njuh Hrlohel Gearbox: Double pedal Technical condition: good Front tires type: Superelastic Front tires size: 27x10-12 Front tires condition: 60 - 80% Rear tires type: Superelastic Rear tires size: 23x9-10 Rear tires condition: 60 - 80% Description: Handover with new FEM 4.004 test including test book If you have any further questions, please call us. In addition to this model, we have around 150 other industrial trucks in stock. Visit our homepage fleischmann-foerdertechnik We will be happy to inquire about leasing & financing as well as delivery at favorable conditions. It is also possible to trade in Linde equipment - even without purchasing a device from us. The operating hours shown were read off at the time of the entry. Subject to prior sale, changes and errors. Clamping fork, side shift, fork positioner, Durwen fork positioner with separate side shift 3rd valve, 4th valve, rear work light, front work light, heating, STVZO, full cabin, full free lift, safety light,

Year of construction: 1973, Condition: used, pressure 6 t distance between columns - mm stroke - mm total power requirement - kW weight of the machine ca. 1 t Dkslstqp Tzsq Sq Nhol dimensions of the machine ca. 1 x 1 x 2 m

Condition: ready for operation (used), Functionality: fully functional, clamping force: 13 kN, screw diameter: 135 mm, clearance between the columns: 1,404 mm, displacement volume: 8,874 cm³, injection pressure: 2,000 bar, plate length: 2,080 mm, plate width: 2,080 mm, pressure: 2,000 bar, SANDRETTO injection 1300 T - serie 8 Reference : 17750/1300 Clamping force : 1300 T Screw diameter : 135 mm Rapport L/D : 20 Injection pressure max : 2000 bars Dslq Sq Nju Ilzushekl Injectable volume : 8874 cm3 Plastification capacity : 145 gr/sec Injection capacity : 1100 cm3/sec Platen dimensions : 2080 x 2080 mm Distance between tie bar : 1404 x 1404 mm Opening strocke : 1530 mm Diameter centering ring : 250 mm Diameter ejection ring : 250 mm Ejection ring : 400 mm Mold thickness : 450-1600 mm Dimensions : 15,86 x 3,18 x 3,16 m

Condition: used, Year of construction: 2001, DIRECT FROM PRINTING SHOP We sell this machine on behalf of our customer and try to realize his asking price. However, we are open to offers from your side. Dkelqeu Stdxs Sq Nhol offer consists of: MBO folder T800 with suction tape feeder - 1st plant 6 buckles + MBO gate fold buckle - FA offset sheet delivery year 2001 with press rollers We can also organize the following for you: packaging, loading, transport ( by ship or plane) including customs

Condition: used, Functionality: fully functional, Year of construction: 2018, operating hours: 8,974 h, load capacity: 2,500 kg, lifting height: 6,465 mm, free lift: 2,274 mm, mast type: triplex, construction height: 2,804 mm, fork carriage width: 1,150 mm, fork length: 1,200 mm, engine type: VW 4 Zylinder BEF, drive type: Treibgas, LPG forklift Load center of gravity: 500 ISO class: ISO class 2 = 1,000 - 2,500 kg Mast type: Triplex Gearbox: Hydrostatic / 2-pedal Condition: Reconditioned without guarantee Technical condition: good Front tires type: Superelastic Front tires size: 23x9-10 NEW Front tires condition: 80 - 100% Rear tires type: Superelastic Rear tires size: 23x9-10 NEW Rear tires condition: 80 - 100% Description: Handed over with new FEM 4.004 test including test book If you have any further questions, please call us. In addition to this model, we have around 150 other industrial trucks in stock. Visit our homepage fleischmann-foerdertechnik Leasing & financing as well as delivery at favorable conditions. We will be happy to inquire for you. It is also possible to trade in Linde equipment - even without purchasing a device from us. The operating hours shown were read off at the time of entry. Subject to prior sale, changes and errors. Dslq Souttkyoq Nhskl Sideshift, fork positioner, Durwen fork positioner 3rd valve, 4th valve, rear work light, heating, STVZO, full cabin, air conditioning, full free lift, safety light, Double bottle holder

Condition: used, Year of construction: 2010, grinding diameter 300 mm grinding length 1000 mm centre height 150 mm total power requirement 6 kW weight of the machine ca. 5 t dimensions of the machine ca. 5 x 3 x 2,2 m No. 4959 Universal cylindrical grinding machine STÖCKEL RSU 100 NC-T Working area: approx. Ø 300 x 1000 Drive: 4/1 kW Electronic handwheel Internal grinding device Coolant device with magnetic separator documentation External grinding spindle Wheel Ø 400 x 50 / 250 x 30 mm 4 kW / max. 1400 mi-1 Internal grinding spindle 1 kW / max. 1400 min-1 Swivel range: - Table : -6° / +10° - Grinding headstock 180° - Workpiece headstock -90° Dkslqstqp R Us Sq Nhol Space requirement approx. 5 x 3 x 2.2 m Transport dimensions approx. 6LM Weight approx. 5.000 kg

Condition: good (used), Year of construction: 2004, clamping force: 15 kN, screw diameter: 135 mm, displacement volume: 9,800 cm³, injection pressure: 1,710 bar, injection weight: 8,920 g, ejector force: 180 N, ejector stroke: 500 mm, plate width: 2,060 mm, plate height: 1,950 mm, overall weight: 91,000 kg, NEGRI BOSSI 1500 T injection molding machine Clamping force: 1500 T Screw diameter: 135 mm L/D ratio: 20 Max. material pressure: 1710 bar Injection volume: 9800 cm3 Injectable weight in PS: 8920 g Plasticizing capacity: 180 gr/sec Distance between columns (H x V): 1400 x 1250 mm Tray dimensions (H x V): 2060 x 1950 mm Max. mold thickness: 1500 mm Max. opening stroke: 1500 mm Dkslq Ssuwd Dtsq Nhjl Hydraulic ejection force: 180 KN Robot interface Blowpipes: 3 Hydraulic cores: 3 Dimensions: 14700 x 3175 x 2785 mm

Condition: used, Functionality: fully functional, Year of construction: 2016, operating hours: 7,207 h, load capacity: 2,500 kg, lifting height: 6,465 mm, free lift: 2,274 mm, mast type: triplex, construction height: 2,804 mm, fork carriage width: 1,150 mm, fork length: 1,200 mm, engine type: VW 4 Zylinder BEF, drive type: Treibgas, LPG forklift Load center of gravity: 500 ISO class: ISO class 2 = 1,000 - 2,500 kg Mast type: Triplex Gearbox: Hydrostatic / 2-pedal Condition: Ready for use and fully functional Technical condition: good Front tires type: Superelastic Front tires size: 23x9-10 Front tires condition: 40 - 60% Rear tires type: Superelastic Rear tires size: 23x9-10 Rear tires condition: 40 - 60% Description: Handed over with new FEM 4.004 test including test book If you have any further questions, please call us. In addition to this model, we have around 150 other industrial trucks in stock. Visit our homepage fleischmann-foerdertechnik Leasing & financing as well as delivery at favorable conditions. We will be happy to inquire for you. It is also possible to trade in Linde equipment - even without purchasing a device from us. The operating hours shown were read off at the time of entry. Subject to prior sale, changes and errors. Sideshift, fork positioner, Durwen fork positioner Dkolq Ssuttkteq Nhel 3rd valve, 4th valve, rear work light, heating, STVZO, full cabin, air conditioning, full free lift, safety light, Double bottle holder

Condition: defective spare-parts repository (used), Year of construction: 1973, weight max. in kg 600 kg fork length 1150 mm stroke height 2700 mm total power requirement ? kW weight of the machine ca. ? t Dkelq Sq Njuq R N Ushsl dimensions of the machine ca. ? m

Condition: good (used), Year of construction: 1996, clamping force: 3 kN, screw diameter: 50 mm, injection pressure: 2,400 bar, ENGEL 300 T injection molding machine bi material Reference : ES150H200L Year : 1996 Clamping force : 300 T 2 Screw diameter : 50 mm - 25 mm Maximum material pressure: 2400 bars - 2400 bars Dkelq Sjupl Szsq Nhjl Injection volume: 422 cm3 - 68 cm3 Platen dimensions (H x V): 1050 x 900 mm Hydraulic cores: 3

Condition: used, Functionality: fully functional, Year of construction: 2008, operating hours: 14,955 h, load capacity: 1,600 kg, lifting height: 3,150 mm, free lift: 1,519 mm, mast type: duplex, construction height: 2,121 mm, fork carriage width: 1,040 mm, fork length: 1,200 mm, drive type: Treibgas, LPG forklift Load center of gravity: 500 ISO class: ISO class 2 = 1,000 - 2,500 kg Mast type: Duplex Gearbox: Double pedal Delq Sq Nsu D Razohokl Condition: Reconditioned without guarantee Technical condition: good Front tires type: Superelastic Front tires size: 18x7-8 Front tires condition: 80 - 100% Rear tires type: Superelastic Rear tires size: 18x7-8 Rear tires condition: 60 - 80% Description: Handed over with new FEM 4.004 test including test book, major maintenance & gas system NEW If you have any further questions, please call us. In addition to this model, we have around 150 other industrial trucks in stock. Visit our homepage fleischmann-foerdertechnik We will be happy to inquire about leasing & financing as well as delivery at favorable conditions. It is also possible to trade in Linde equipment – even without purchasing a device from us. The operating hours shown were read off at the time of entry. Subject to prior sale, changes and errors. Sideshift, integrated sideshift 3rd valve, front work light, full free lift,

Condition: good (used), Year of construction: 1995, clamping force: 1 kN, screw diameter: 45 mm, displacement volume: 318 cm³, injection pressure: 2,040 bar, ENGEL 150 T injection molding machine Reference : ES 650/150 HL Djlsupl Suoq Sq Nhekl Year : 1995 Clamping force : 150 T Screw diameter : 45 mm Maximum material pressure: 2040 bars Injection volume: 318 cm3 Platen dimensions (H x V): 820 x 750 mm Hydraulic cores: 2

Condition: used, Functionality: fully functional, Year of construction: 2019, operating hours: 1,487 h, load capacity: 1,600 kg, lifting height: 750 mm, fuel type: electric, fork length: 1,400 mm, drive type: Elektro, construction width: 800 mm, net weight: 475 kg, Low lift truck Load centre of gravity: 500 Condition: Ready for use and fully functional Technical condition: good Battery voltage: 24V Battery Ah: 250Ah Battery manufacturer: GNB Battery type: PzS Battery year of manufacture: 2018 Battery condition: 60 - 80% Dkelq Sou Txmroq Nhel Description: Handed over with new FEM 4.004 test including test book If you have any further questions, please call us. In addition to this model, we have around 150 other industrial trucks in stock. Visit our homepage fleischmann-foerdertechnik We will be happy to enquire about leasing & financing as well as delivery at favorable conditions. It is also possible to trade in Linde devices - even without purchasing a device from us. The operating hours shown were read at the time of setting. Subject to prior sale, changes and errors. Initial lift, double-deck loading, Special fork length 1400mm, can be shortened to standard 1150mm, at no extra cost.

Condition: good (used), Year of construction: 2002, Functionality: fully functional, clamping force: 17 kN, screw diameter: 135 mm, displacement volume: 8,160 cm³, injection pressure: 1,600 bar, ENGEL 1750 T injection molding machine Reference : T18000/1000 Year : 2002 Clamping force : 1750 T Screw diameter : 135 mm Maximum material pressure: 1600 bar Injection volume: 8160 cm3 Distance between columns (H x V): 1805 x 1405 mm Platen dimensions (H x V): 2660 x 2250 mm Dslq Sq Neummktohekl Minimum mold thickness: 700 mm Maximum mold thickness: 1500 mm Hydraulic cores: 2

Condition: good (used), SANDRETTO serie 9 1300-300 Clamping force : 300 T Distance between tie bar : 570 x 570 mm Platen dimension : 860 x 860 mm Mould thickness min/max : 210 - 730 mm Opening strocke max : 630 mm Injectable volume : 658 cm3 Delq Sok Unbleq Nhskl Injection presure on the material : 1985 bars Screw diameter : 55 mm