Used Schaffer 450 T for sale (21,349)

Year of construction: 2005, Condition: used, Solo feeders Built in 2005 Dsbec Inicovccqmjcg Equipment double opener

Condition: new, Year of construction: 2024, operating hours: 16 h, load capacity: 45,000 kg, lifting height: 15,100 mm, load center: 1,965 mm, mast type: telescope, power: 265 kW (360.30 HP), front tire type: Tyre Advance, front tire size: 18.00-25, rear tire type: Tyre Advance, rear tire size: 18.00-25, engine type: Volvo Penta TAD1181VE, drive type: Diesel, net weight: 71,120 kg, - Reachstacker für die Handhabung von Containern - Kapazität: -> 8'6" Container: 45.000 kg Tragkraft - Stapelung 1/2/3/4/5-high -> 9'6" Container: 45.000 kg Tragkraft - Stapelung 1/2/3/4/5-high -> 8'6" Container: 32.000 kg Tragkraft - Stapelung 1/2/3/4/5-high -> 9'6" Container: 32.000 kg Tragkraft - Stapelung 1/2/3/4-high -> 8'6" Container: 16.000 kg Tragkraft - Stapelung 1/2/3/4-high -> 9'6" Container: 16.000 kg Tragkraft - Stapelung 1/2/3-high - Mast: langlebiger und geschweißter 2-stufiger Duplexausleger mit Kasten- und Teleskopausführung - Zwei Hubzylinder im Fahrgestell/Ausleger und ein Ausschubzylinder im Ausleger, Ausfahrhub von 7.000 mm für die Handhabung von bis zu 3 Reihen tief, normale Auslegerspitze - Toplift-Spreader für den Containerumschlag, maximale Tragkraft 45 Tonnen, teleskopierbar 20ft-40ft, 2 hydraulische Rotationsmotoren und 2 hydraulische Rotationsbremsen, für dauerhaftes und sicheres Handling - Seitenverschiebung ± 800 mm (insgesamt 1.600 mm) Dcebvccsv Az Ipjqmsg - Mechanische Pfahlneigung ± 5 Grad (Seitenneigung / Nivellierung durch Schwerkraft) - Motorische Drehung Grad - Endträger mit 4 starken Hebehaken für Schlingen (4 x 12,50 Tonnen Tragkraft), aber max. 45 Tonnen - Sicherheitsverriegelung mit 4 Ausrichtungsstiften und 4 Sensoren, montiert in Twistlock-Endträgern - An der Auslegernase montierte LED-Anzeigetafel für den Containerumschlag - In der Kabine montiertes LED-Head-Up-Anzeigedisplay für die Containerhandhabung - Motor: Dieselmotor Volvo TAD1181VE6 - 6-Zylinder-Reihenmotor, Turbolader und Ladeluftkühlung, Volumen 10,84 Liter - Leistung, Nenn-/Maximalleistung: 265/265 kW bei 2100 U/min - Drehmoment, max.: 1785 Nm bei 1400 U/min - Ölwechsel nach 1.000 h und Filterwechsel nach 1.000 h (ohne Ölprobenentnahme) - Getriebe Dana TE Automatische Lastschaltung und hydrodynamischer Drehmomentwandler - Sperrschutz für Fahrtrichtung – vorwärts/rückwärts. - Steuerung und Überwachung: Elektronischer CanBus. - Gänge: vorwärts 5 – rückwärts 3. - Kabine: Alle Schalter in der Kabine sind mit LED-Leuchten ausgestattet - Head-Up-Display in LED zur Drehverriegelungsanzeige. - 2 x 24-V-Steckdosen in den Türsäulen - Sitz Gammer Actimo XL, mechanische Feder, 3-Punkt-Sicherheitsgurt und hohe Rückenlehne, Kopfstütze - Elektrisch verstellbare Armlehne rechts. - Getönte/laminierte Fenster inkl. Schiebefenster in linker und rechter Tür - Scheibenwischer vorne (doppelt), hinten und Dachfenster - elektronisch gesteuerte Heizung/Lüftung inkl. Klimaanlage und Frischlufteinlassfilter, ausgeschaltet bei offener Tür - Komplette Türen mit Griff, Schlüsselschloss und Luftklappe (links und rechts) - Komplettes Manövriersystem rechte Konsole inkl. Standarddisplay (elektrisch verstellbar), Multifunktionshebel linke Seite. - Verstellbare Steuerung, Lenkradkonsole und Schalterfelder - Ergonomischer Joystick für Ausleger- und Anbaugerätefunktionen - Geschwindigkeitsregelpedal rechte Seite, Bremspedale linke und rechte Seite - Lenkrad mit Lenkradknauf. Sicherheitsübersteuerung für Hydraulikfunktionen (per Code) - Radio, MP3, USB, AUX, Bluetooth, Freisprechfunktion, RDS - 24/12-V-Konverter einschließlich vier 20-Ampere-Steckdosen an den vorderen Kabinenpfosten. 1 x 12-V-Steckdose, 2 x 5-V-USB-Steckdosen und 2 x 24-V-Steckdosen - Kalmar-Lenkachse mit doppelten Drehlagern, mechanischen Seitenanschlägen (±3 Grad) und elektrischer Servolenkung mit doppeltwirkendem Zylinder ermöglicht einen kleinen Wenderadius. - Hochleistungsantriebsstrang...

Year of construction: 1980, Condition: good (used), indoor crane, crane, electric wire rope hoist, manual trolley, push trolley, crane trolley, trolley undercarriage, crane undercarriage, crane undercarriage, trolley, carrier undercarriage, overhead track undercarriage -Manufacturer: Balkancar, crane chassis type T 10232 with electric cable hoist Dsbvcevyzinjcqmscg -Cable hoist: load capacity 0.5 t -Hook path: 12.0 m -Dmensions: see photos -Lifting speed: 8 m/min -Travel speed 20 m/min -Transport dimensions: 830/550/H860 mm -Weight: 142 kg

Condition: new, Year of construction: 2025, saw blade diameter: 550 mm, cutting capacity: 200 mm, warranty duration: 12 months, Standard Accessories Location points for 15° – 22.5° – 30° – 45° – 67.5° Fixing handle for locking at intermediate angles Adjustable cutting speed for different types of profile Saw covering with safety switch Belt propulsion saw Two hand safety operation Easy to change saw blade 2 x Pneumatic vertical piston with clamps 1 x Air gun Dsbjv Rb T Iovccqmocg Optional Equipment Hydrocheck – Hydraulic speed adjustment for aluminum profiles Cooling system for aluminum cutting Auxiliary conveyor with rulers

Condition: used, mileage: 599,975 km, power: 184 kW (250.17 HP), first registration: 01/2013, overall weight: 13,000 kg, fuel type: diesel, color: red, axle configuration: 4x4, maximum load weight: 5,945 kg, empty load weight: 7,055 kg, tire size: 385/65R22.5, wheelbase: 3,250 mm, brakes: constant throttle, driver cabin: day cab, gearing type: automatic, emission class: euro5, suspension: steel-air, number of seats: 2, Equipment: ABS, additional headlights, all wheel drive, cabin, crane, differential lock, fog lights, low noise, onboard computer, power assisted steering, trailer coupling, Vehicle location: Bovenden, registration house, 1x air seat, electric mirrors, heated mirrors, electric window left, electric window right, sun visor, ABS (anti-lock braking system), constant throttle, power take-off, AS-Tronic automatic, differential lock, fog lights, work lights, rotating beacon, storage box, leaf-air suspension, tow bar ball head, low-noise G1, U-protection, alu side guards, crane behind house, foldable, 2xhydraulic extensions, 2xmechanical extensions, environmental badge green, green sticker. Aluminum wheel guard, crane behind house, foldable, 2x hydr. extensions, 2x mech. extensions, green environmental sticker Dobvjvhkv Heccqmjcg Wheelbase: 3250 mm Body: Platform body with crane Hiab 026 T-3 & suction/flushing tank with high-pressure cleaner for mobile toilets (DIXI) Gearbox ZF 12 AS 1210 OD MAN TipMatic, MAN BrakeMatic, C-cab, auxiliary drive NH/4. Load diagram: 1.4m-1820kg, 2.4m-1065kg, 3.5m-725kg, 4.6m-550kg! Loading height front approx. 1280mm & rear approx. 1230mm! The engine has the same displacement of 6.871m³ as the 340hp engine! ACCESSORIES WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! - .

Condition: good (used), Year of construction: 2013, operating hours: 3,542 h, mast type: telescopic, fuel type: diesel, color: yellow, General information Field of application: Construction Drivetrain Drive: Track Weights Empty weight: 3.760 kg Functional Lifting capacity: 200 kg Working height: 2.520 cm Condition Technical condition: good Visual appearance: good Other information EPA Marked: yes Delivery terms: EXW Max. horizontal reach: 1800 m Dcebvccoq R Ubujqmog Additional information Please contact Vink Machinery for more information Teupen Leo 25 T * 2013 * 25 meters Working height * 23 meters Lifting height * 18 meter range! * Very complete and in very neat condition!

Condition: ready for operation (used), Size max 560 x 920 mm min 150 x 180 mm Speed max 180 m/min Equipment feeder: • continuous feeder • MS control • counter 1st folding unit: • 4 buckle plates • noise prevention delivery: Debvjd A Hcveccqmocg • belt delivery

Condition: good (used), White Type: SC/KWT 450 Salt spray chamber Technical data: Test chamber capacity 450 liters Max. load 100 kg Brine storage tank 180 liters External dimensions: Height 920 mm Width 1930 mm Depth 800 mm Test compartment dimensions: Height 740 mm Width 850 mm Depth 570 mm Areas of application: Dsboudvg Revccqmjcg Corrosion tests: Salt spray test: room temp. up to + 50°C Condensation water test: Room temp. up to + 45°C Humidifier +75°C Temperature constancy The temperature deviation over time is ± K. Voltage: 1/N/PE AC 230V ±10% 50Hz Rated power 2.0 kW Rated current 8.5 A Combination: Salt spray test SS: DIN 50021 Condensation water test KFW: DIN 50017 Normal climate (ventilation): DIN 50014 Weight: 180 kg Condition: second-hand / used Scope of delivery: (see picture) (We reserve the right to make changes and errors in the technical data and specifications) We will be happy to answer any further questions you may have on the phone.

Condition: used, mileage: 490,000 km, power: 324 kW (440.52 HP), color: grey, axle configuration: 8x4, tire size: 385/65/22,5, wheelbase: 3,900 mm, gearing type: mechanical, emission class: euro5, suspension: steel-air, loading space width: 2,320 mm, loading space length: 5,490 mm, loading space height: 800 mm, Year of construction: 2011, Equipment: air conditioning, trailer coupling, Axle 1: Tyre size: 385/65/22,5; Suspension: leaf suspension Axle 2: Tyre size: 315/80/22,5; Double wheels; Suspension: air suspension Axle 3: Tyre size: 315/80/22,5; Double wheels; Suspension: air suspension Dcobvev Np Ideccqmjg Axle 4: Tyre size: 385/65/22,5; Steering; Suspension: air suspension Drive: Wheel GVW: 32.000 kg Mast: telescopic (8 parts) Crane: Yes Make of bodywork: CREVITS

Condition: new, mileage: 154 km, power: 110 kW (149.56 HP), fuel type: diesel, gearing type: mechanical, wheelbase: 3,680 mm, first registration: 05/2024, emission class: euro6, color: black, number of seats: 3, number of previous owners: 1, Year of construction: 2024, Equipment: air conditioning, cruise control, power assisted steering, trailer coupling, = Other options and accessories = - Heated exterior mirrors - Passenger bench - Third brake light - Electric front windows - Electrically adjustable exterior mirrors - Driver airbag - Remote central locking - Rear doors - Height-adjustable steering wheel - Center armrest - Radio/CD player - Side door - Central locking - Partition without window = Remarks = 155 kilometers Tow bar Passenger bench Air conditioning Cruise control Radio = Other information = General information Number of doors: 3 Model year: 2025 Registration number: V-28-DVR Technical information Number of cylinders: 4 Dcobvevwadleccqmog Engine capacity: 2,299 cc Transmission: 6 gears, manual Dimensions Dimensions (L x W x H): 555 x 207 x 250 cm Weights Empty weight: 1,956 kg Payload: 1,544 kg GVW: 3,500 kg Environment CO₂ emissions: 237 g/km Maintenance, history and condition Booklets: Available APK (main technical inspection): tested until 05.2027

Condition: used, mileage: 625,095 km, power: 184 kW (250.17 HP), first registration: 07/2012, overall weight: 13,000 kg, fuel type: diesel, color: red, axle configuration: 4x4, maximum load weight: 6,135 kg, empty load weight: 6,865 kg, tire size: 385/65R22.5, wheelbase: 3,250 mm, brakes: constant throttle, driver cabin: day cab, gearing type: automatic, emission class: euro5, suspension: steel-air, number of seats: 2, Equipment: ABS, additional headlights, all wheel drive, cabin, crane, differential lock, fog lights, low noise, onboard computer, power assisted steering, trailer coupling, Vehicle location: Bovenden, registration house, 1x air seat, electric mirrors, heated mirrors, electric window left, electric window right, sun visor, ABS (anti-lock braking system), constant throttle, power take-off, AS-Tronic automatic, differential lock, fog lights, work lights, rotating beacon, storage box, leaf-air suspension, tow bar ball head, low-noise G1, U-protection, alu side guards, crane behind house, foldable, 2xhydraulic extensions, 2xmechanical extensions, environmental badge green, green sticker. Aluminum wheel guard, crane behind house, foldable, 2x hydr. extensions, 2x mech. extensions, green environmental sticker Wheelbase: 3250 mm Body: Platform body with crane Hiab 026 T-3 & suction/flushing tank with high-pressure cleaner for mobile toilets (DIXI) Gearbox ZF 12 AS 1210 OD MAN TipMatic, MAN BrakeMatic, C-cab, auxiliary drive NH/4. Load diagram: 1.4m-1820kg, 2.4m-1065kg, 3.5m-725kg, 4.6m-550kg! Loading height front approx. 1280mm & rear approx. 1230mm! The engine has the same displacement of 6.871m³ as the 340hp engine! ACCESSORIES WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! Dcebvccqjvhkwdjmeg - .

Condition: excellent (used), Year of construction: 2016, Type: MultiShaker 450/1600 Serial number: E050970405041 Year of construction: 2016 Width: 450 mm Length: 1800 mm Infeed height: 1350 mm Slith: 2 mm Power: 3 x 400V, 50Hz, 16A Dimensions: 1900 x 1100 x 1450 mm Dcebjvccr Ajvccqmsg Weight: 860 kg

Year of construction: 2002, Condition: used, Size max 1.120 x 1.450 mm min 250 x 250 mm Speed max 10-16 m/min Equipment: feeder • pallet feeder (MBO) • MC control 1st folding unit: • 4 buckle plates • rear-mounted slitter shafts • noise prevention 2nd folding unit: • 4 buckle plates • rear-mounted slitter shafts Dcjbvcceddh Eveqmjg • noise prevention 3rd folding unit: • 2 buckle plates • rear-mounted slitter shafts • noise prevention delivery: • belt delivery

Condition: excellent (used), CTS Type: T-40/2000 Air-cooled temperature test chamber Technical design: Refrigeration unit: air-cooled, low-noise, fully hermetic, infinitely variable power adjustment through electronic monitoring and control system, environmentally friendly refrigerant R404A Dcsbvsup T Uqjccqmsg Door: fully opening door, door hinge left, one-handed operation, lockable. Shelf: Stainless steel, support surface 970 x 980 + 500 mm Max. load per shelf 35 kg Total load with max. grid load 100 kg Test area lighting: 3x halogen lamp 20 W, 12 V Control: 32 bit controller LCD control panel Digital display of set and actual values Numerical input of setpoint values Error messages in plain text RS 232 interface Free switching channels for on-site test material control Temperature range: -40°C to +180°C Nominal voltage: 400V 3/N 50Hz Rated power: 10.4 kW Nominal current: 17.2 A Compressor: TFH2516Z Pipe feed-through NW 50 Control panel Window 570x710 mm Electrical connection, cable length 5m Technical performance data: Temperature tests: Temperature range -40°C to +180°C Temperature deviation ≤ ±0.3 K in time Temperature change rate according to IEC 60068-3-5 Heating 2.5 K/min Cooling 1.5 K/min Heat radiation: approx. 2500 W at +20°C approx. 2100 W at ± 0°C approx. 1500 W at -20°C The technical data refer to an ambient temperature of +25 °C, rated voltage 400V, without test material, without irradiation and without additional equipment. Dimensions: Test volume: 2000 liters Test chamber dimensions: Height 900, width 975, depth 2200 mm External dimensions: Height 1950, width 1290, depth 3145 mm Operating data: Electrical connection: 400 V +6/-10 %, 3/N, 50 Hz Rated power: 17.2 kW Protection class: IP 22 Condensate drain unpressurized R 1/2" internal thread Sound pressure level (according to DIN EN ISO 3744 measured at a distance of 1 m from the front) < 55 dB(A) Weight: approx. 1200 kg The following information is for your safety as a buyer! The following points are carried out on our offered chambers in advance: 1. functional check and replacement of necessary components 2. if necessary, new filling with legally compliant refrigerant 3. leak test with certificate 4. after successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: new, machine/vehicle number: PA1319, New screening bucket approx. 1500 mm with teeth, bolt diameter 70 mm, suitable for weight class 22/30 T, dead weight approx. 1,040 kg, vehicle can be covered with advertising and/or labeled Dcobevnnrrsvccqmjg

Condition: excellent (used), CTS Temperature Test Chamber Here we offer you a CTS temperature test chamber. Water cooled Type series: T-40/600 Including metal struts to increase the floor load capacity Test chamber volume: 600 liters Test chamber dimensions: Height approx. 850 mm, width approx. 850 mm, depth approx. 830 mm Outer dimensions: Height approx. 1900 mm, width approx. 1050 mm, depth, approx. 1850 mm Temperature working range: Temperature range -40 to +180°C Dcsbvohxyg Hjccqmog Temperature deviation ±0.1 to ±0.3 K temporally heating speed: 2,5 K/min cooling rate: 3 K/min Electrical connection 400 V +6% -10%, 3/N, 50 Hz rated power: approx. 5,5kW rated current: approx. 8,5 A Refrigerant: R404A Weight: 550 Kg Type: T-40/600 /011232 For you as a buyer for safety the following information! The following points are carried out on our offered chambers in advance: 1. functional check and exchange of necessary components 2. new filling with legally compliant refrigerant 3. after successful inspection, the chambers are subjected to a test run, which is monitored with calibrated equipment. Condition: used / used Scope of delivery: (See picture) (Changes and errors in the technical data, specifications are reserved!) Further questions we can answer on the phone for you.

Condition: new, machine/vehicle number: PA1317, New screening bucket approx. 1200 mm with teeth, bolt diameter 80 mm, stick width up to 326 mm, suitable for weight class 17/24T, example: Komatsu, Kobelco, Volvo, Samsung etc., vehicle can be covered with advertising and/or labeled Dcebvccqevnnrfomeg

Condition: excellent (used), CTS Temperature test chamber T-55/1000 Li water-cooled Temperature range: -50°C to +100°C Rated voltage: 400V 3/N 50Hz Rated power: 9.5 kW Nominal current: 18 A Compressor: TFH2511Z / TFH2511Z Refrigerant R404A/R23 The type designation of the CTS cabinet series is composed as follows: z. e.g. type T -55/1000/Li 1) T means: temperature 2) -55 means: lower temperature -55 °C 3) 1000 means: 1000 liter test chamber volume 4) Li means: special equipment for tests with lithium-ion accumulators Control: 32 bit controller LCD control panel Digital display of set and actual values Numerical input of setpoints Error messages in plain text Ethernet interface RS 232 interface Free switching channels for on-site test material control Test room lighting: energy-efficient, high-intensity LED light strip mounted on the door Insert grid: Stainless steel, support surface 970 x 980 mm Load per shelf max. 35 kg Total load with max. grating load 100 kg 1a Feed-through NW50 1b Feed-through 2x NW125 1c Entry port 2x Rp 314° for Minimax Technical performance data: Temperature tests: Temperature range -50°C to +100°C Temperature deviation ≤ ±0.3 K in time Temperature change rate according to IEC 60068-3-5 Heating 2.5 K/min Cooling 2.5 K/min Heat compensation approx. 4000 W at +20°C approx. 2200 W at -40°C The technical data refer to an ambient temperature of +25 °C, rated voltage 400V, without test material, without heat compensation and without additional equipment. Options may affect the performance data. Dimensions: Test volume 1000 liters Test chamber dimensions Height, approx. 1000 mm, width, approx. 860 mm, depth, approx. 1100 mm External dimensions Height, approx. 1950 mm, width, approx. 1270 mm, depth, approx. 1900 mm Operating data: Electrical connection 400 V +6/-10 %, 3/N, 50 Hz Nominal current 18 A Rated power 9.5 kW Protection class IP 54 Sound pressure level < 58 dB(A) (according to DIN EN ISO 3744 measured at a distance of 1 m from the front) Mass approx. 1000 kg Heat output to the installation room 10.4 kW Cooling unit: water-cooled, low-noise, fully hermetic Infinitely variable output adjustment via electronic monitoring and control system, environmentally friendly refrigerant R404A/R23 The following information is for your safety as a buyer! The following points are carried out on our offered chambers in advance: 1. functional check and replacement of necessary components Dcjbvccjvba Raeqmjg 2. if necessary, refilling with legally compliant refrigerant 3. leak test with certificate 4. after successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: excellent (used), CTS Temperature Test Chamber Here we offer you a CTS temperature test chamber. Water cooled CTS temperature test chamber Technical performance data: Temperature working range temperature range -70°C / +180°C cooling speed 3,0 K/min Heating speed 3.5 K/min Temperature constancy, temporal ≤± 0.3 K. Dimensions: Test volume: 600 liters Test chamber dimensions height, approx. 850 mm, width, approx. 850 mm, depth, approx. 830 mm External dimensions height, approx. 1900 mm, width, approx. 1120 mm, depth, approx. 1875 mm Operating data: Electrical connection 400 V +6% -10%, 3/N, 50 Hz connected load 8,2 kW, 14,2 A Refrigerant: R404A / R23 Weight: 600 Kg Type: T-70/600 For you as a buyer for safety the following information! The following points are carried out on our offered chambers in advance: 1. functional check and exchange of necessary components 2. new filling with legally compliant refrigerant 3. leak test with certificate 4. after successful inspection, the chambers are subjected to a test run, which is monitored with calibrated equipment. Condition: used / used Debvccqeichkvomecg Scope of delivery: (See picture) (Changes and errors in the technical data, specifications are reserved!) Further questions we can answer on the phone for you.

Year of construction: 2022, Condition: excellent (used), Dycometal Type: CCK -40/1500T Climate chamber water-cooled Volume liters 1500 Internal dimensions height 1000 mm width 1000 mmm depth 1500 mm External dimensions Height 2200 mm Width 1293 mmm Depth 3400 mm Thermal test Minimum temperature -40°C Maximum temperature +150°C Thermal gradient cooling 2.0 K/min. Thermal gradient during heating 3.5 K/min. Temperature stability ±0.1°C to ±0.3°C Temperature uniformity ±0.5°C to 1.5°C Climate test Temperature range +10°C to +90°C Humidity range 10% to 98% %RH Dew point range +6.5°C to +86°C Humidity stability ±1%RH to ±3%RH Water-cooled condenser Nominal voltage 400 V 3N~PE 50 Hz Output 16.1 kW 27.5 A Refrigerant R-452A Weight: 1120 kg Condition: second-hand / used Djbvcceu N Uugeqmscg Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: excellent (used), CTS Type: T-70/600/S Water-cooled temperature test chamber Control system: - 32 bit controller - LCD control panel - Digital display of set and actual values - Numerical input of setpoints - Error messages in plain text - RS 232 interface - Free switching channels for on-site test material control Technical performance data Temperature tests: Temperature range -70 °C to +180 °C Temperature deviation ±0.1 to ±0.3 K in time Temperature change rate according to IEC 60068-3-5 Heating 2.5 K/min Cooling 2.5 K/min Heat radiation approx. 2500 W at +20°C approx. 2500 W at + 0°C approx. 1800 W at -40°C The technical data refer to an ambient temperature of +25 °C, rated voltage 400V, without test material, without irradiation and without additional equipment. Dimensions: Test volume 600 liters Test chamber dimensions Height, approx. 850 mm, width, approx. 850 mm, depth, approx. 830 mm External dimensions Height, approx. 1900 mm, width, approx. 1120 mm, depth, approx. 1875 mm Operating data: Electrical connection 400 V +6/-10 %, 3/N, 50 Hz Rated power 8.8 kW Nominal current 14.8 A Protection class IP 22 Weight approx. 700 kg Refrigerant: R404A / R23 Weight: 600 kg The following information is for your safety as a buyer! The following points are carried out on our offered chambers in advance: 1. functional check and replacement of necessary components 2. if necessary, new filling with legally compliant refrigerant 3. leak test with certificate 4. after successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (see picture) Dcebvcceu U Ixmoqmjg (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: good (used), CTS Type: T-70/600/S Temperature test chamber water-cooled Refrigerant: Converted to R-452A Control: - 32 bit controller - LCD control panel - Digital display of setpoints and actual values - Numerical input of setpoints - Error messages in plain text - RS 232 interface - Free switching channels for on-site test material control Technical performance data Temperature tests: Temperature range -70 °C to +180 °C Temperature deviation ±0.1 to ±0.3 K in time Temperature change rate according to IEC 60068-3-5 Heating 2.5 K/min Cooling 2.5 K/min Debevitmdsvccqmecg Heat radiation approx. 2500 W at +20°C approx. 2500 W at + 0°C approx. 1800 W at -40°C The technical data refer to an ambient temperature of +25 °C, rated voltage 400V, without test material, without irradiation and without additional equipment. Dimensions: Test volume 600 liters Test chamber dimensions Height, approx. 850 mm, width, approx. 850 mm, depth, approx. 830 mm External dimensions Height, approx. 1900 mm, width, approx. 1120 mm, depth, approx. 1875 mm Operating data: Electrical connection 400 V +6/-10 %, 3/N, 50 Hz Rated power 8.8 kW Nominal current 14.8 A Protection class IP 22 Weight approx. 700 kg Refrigerant: R-452A / R23 Weight: 700 kg The following information is for your safety as a buyer! The following points are carried out on our offered chambers in advance: 1. functional check and replacement of necessary components 2. if necessary, new filling with legally compliant refrigerant 3. leak test with certificate 4. after successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: excellent (used), CTS Type: T-70/600/S Water-cooled temperature test chamber Control system: - 32 bit controller - LCD control panel - Digital display of set and actual values - Numerical input of setpoints - Error messages in plain text - RS 232 interface - Free switching channels for on-site test material control Technical performance data Temperature tests: Temperature range -70 °C to +180 °C Temperature deviation ±0.1 to ±0.3 K in time Temperature change rate according to IEC 60068-3-5 Heating 2.5 K/min Cooling 2.5 K/min Heat radiation approx. 2500 W at +20°C approx. 2500 W at + 0°C approx. 1800 W at -40°C The technical data refer to an ambient temperature of +25 °C, rated voltage 400V, without test material, without irradiation and without additional equipment. Dimensions: Test volume 600 liters Test chamber dimensions Height, approx. 850 mm, width, approx. 850 mm, depth, approx. 830 mm External dimensions Height, approx. 1900 mm, width, approx. 1120 mm, depth, approx. 1875 mm Operating data: Electrical connection 400 V +6/-10 %, 3/N, 50 Hz Rated power 8.8 kW Nominal current 14.8 A Protection class IP 22 Weight approx. 700 kg Refrigerant: R404A / R23 Weight: 600 kg Dsbvccjuzv Rgjqmocg The following information is for your safety as a buyer! The following points are carried out on our offered chambers in advance: 1. functional check and replacement of necessary components 2. if necessary, new filling with legally compliant refrigerant 3. leak test with certificate 4. after successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Year of construction: 2011, Condition: excellent (used), Here we offer you CTS temperature test chamber. Control-32 bit controller LCD control panel Digital display of set and actual values Numerical input of the setpoints Error messages in plain text Interface RS 232 Dcjbvccqjihb Amemog Free switching channels for on-site test material control Temperature tests: temperature range -30°C to +80°C temperature deviation ±0,3 K temporally Temperature change rate heating 2 K/min Cooling 1.5 K/min to -10°C Heat radiation approx. 1000 W at +20°C approx. 200 W at -25°C Data for gas supply: Temperature range: -25°C to +55°C Temperature deviation: ±0.25 K to the test space Temperature change rate measured on average at a gas flow of 10 Nm³/h: at least as fast as the test chamber Data for the gas return: Temperature range: +18°C to +30°C Temperature deviation: ±0.25 K to the test chamber Nitrogen inerting with residual oxygen monitoring With nitrogen inerting, the test chamber is first purged with the large purge volume N2 until the oxygen content is less than 3%. After that, the system switches to a base load (approx. 10% of the large flush volume). is switched over. The nitrogen flow rate of the base load is measured with a flow meter, displayed and monitored by a limit switch. and monitored by means of a limit switch. The O2 monitoring system continuously extracts from the test chamber via a flashback arrestor gas from the test chamber via a flame arrester and passes it over an O2 sensor that monitors the residual oxygen content of the extracted air. The gas is then returned to the test chamber via a second flashback arrestor. test chamber. The exhaust pump is monitored by a volumetric flow meter. Further details can be found can be found in the Dräger operating instructions in the appendix. The gas device is currently out of service! The technical data refer to an ambient temperature of +25 °C, Nominal voltage 400V , without test material, without irradiation and without additional equipment. Dimensions: Test volume 950 liters Test chamber dimensions height approx. 700 mm / width approx. 900 mm depth approx. 1500 mm External dimensions height approx. 2400 mm / width approx. 1270 mm depth approx. 3125 mm Operating data: Electrical connection 400V+6/-10 %, 3/N,50 Hz rated power 21,6 kW rated current: 36,5 A Protection class IP 54 condensate drain pressureless R 1/2" female thread Sound pressure level < 62 dB(A) (according to DIN EN ISO 3744 measured at 1m distance from front) weight: approx. 1500 kg, control cabinet approx. 300 kg external refrigeration unit refrigerant R404A / R23 Type: T-30/950 Ex/I For you as a buyer for safety the following information! The following points are carried out on our offered chambers in advance: 1. functional check and exchange of necessary components 2. new filling with legally compliant refrigerant 3. leak test with certificate 4. after successful inspection, the chambers are subjected to a test run, which is monitored with calibrated equipment. Condition: used / used Scope of delivery: (See picture) (Changes and errors in the technical data, specifications are reserved!) Further questions we can answer on the phone for you.

Condition: excellent (used), CTS Climatic test chamber T-70/600 water-cooled Temperature range: -70°C to +180°C Rated voltage: 400V 3/N PE 50 Hz Rated power: 6.7 kW Rated current: 10.2 A Compressor: TFH2480Z/TFH2511Z Refrigerant R23/R404A Control system: -Microprocessor-controlled control and monitoring system Simple, user-friendly terminal built into the door. -Digital temperature setpoint and actual value display Simple variation via +/- button -Digital input for temperature in °C -PLC compatible -Up to 100 test programs possible -RS 232 interface -2 free switching channels for on-site test material control Insert grid: Stainless steel, contact surface 820 x 710 mm Load per grid max. 35 kg Total load with max. grid configuration 100 kg Cooling unit: Water-cooled, low-noise, fully hermetic Infinitely variable power adjustment through electronic monitoring and control system, environmentally friendly refrigerant R404A/R23 Temperature tests: Temperature range -70 °C to+ 180 °C Temperature deviation ±0.1 to 10.3 K in time Rate of temperature change according to DIN 50 011, part 12 measured in the center of the test room Heating 2.5 K/min Cooling 2 K/min Heat radiation max. 1500 W at +20°C The technical data refer to an ambient temperature of +25 °C, rated voltage 400 V, without test material, without irradiation and without additional equipment. Dimensions: Test volume 600 liters Test chamber dimensions 850 x 830 x 850 mm (W x Dx H) Debvccovaxq Njqmocg External dimensions 1050 x 1850 x 1900 mm (W x DxH) Operating data: Electrical connection 400 V +6/-10 %, 3/N, 50 Hz Rated power 6.7 kW Rated current: 10.2 A Protection class IP 22 Condensate drain unpressurized R 1/2" internal thread Sound pressure level < 62 dB(A) Weight approx. 400 kg The following information is for your safety as a buyer! The following points are carried out on our offered chambers in advance: 1. functional check and replacement of necessary components 2. if necessary, new filling with legally compliant refrigerant 3. leak test with certificate 4. after successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.