Used Schaffer 3550 T Slt for sale (13,351)

Year of construction: 1985, Condition: excellent (used), strip width: max. 1.500 mm strip thickness: 0,3 - 2 mm Dkolqenfu Ice Sx Rfjl coil weight: 6 t mandrel Ø: 508 mm No. of slits: max. 9

Condition: used, overall weight: 49,000 kg, maximum load weight: 36,100 kg, axle configuration: 2 axles, first registration: 10/2024, next inspection (TÜV): 10/2025, total width: 2,550 mm, Equipment: ABS, Excerpt from the furnishings. Full furnishings available upon request. Gooseneck * Gooseneck in SNT design to optimize the loading area length * Length approx. 3,750 mm, hydraulically raised/lowered and removable * Technical fifth wheel load: 25,000 kg * For tractors: 4 x 2, 6 x 2, and 6 x 4 Lowbed * Lowbed designed as a telescopic tank bridge in a low construction with front extension and mechanical locking * Length x width approx. 6,850 mm x 2,540 mm * The supply lines are protected in the extendable supports and automatically adjust to the respective lowbed length Axles and Suspension * PENDULUM AXLE, all axles hydro-mechanically forced steered, hose rupture valve on the axle compensation, cylinder with automatic RESET function * Hydraulic cylinder with shut-off valves and cotter pins for securing in the raised position * Technical axle load: each 12,000 kg * Hydraulic axle compensation Tires * 245/70 R 17.5 Dkelqsv U H Rms Sx Rfjl Rear chassis * Rear chassis with closed outer frame with checker plate cover and continuous prismatic excavator trough approx. 1,250/700 x 505 mm, open at the rear Braking system * WABCO EBS-E braking system in accordance with EU regulations, without connection cable to the tractor unit Paintwork * Trailer color: RAL 3002 Carmine Red Accessories included * Plug-in steel bulkhead, approx. 400 mm high * 3 kW electro-hydraulic power unit for controlling hydraulic processes, with the exception of hydraulic cable winches, without installation of supply connections on the tractor unit * Gooseneck outer support with mounting holes for screw-on lashing rings. The first hole is about 200 mm from the front, then every 400 mm. 2 pairs of screw-in lashing rings included (LC 5,000 daN) * 1 lashing ring each on the left and right on the rear bevel of the gooseneck (LC 6,000 daN) * 2-inch kingpins * One locking point every approximately 500 mm on the extension * 1 pair of steel ramps with climbing rails and fastening bolts for bridging the low bed's hooks * 1 lashing ring each on the left and right on the front cross member (LC 10,000 daN) * Lashing rings with retaining springs every approximately 1,200 - 1,300 mm on the outside of the inner beams of the loading area * Lashing rings with retaining springs every approximately 1,200 - 1,300 mm on the outside of the outer beams of the loading area (LC 10,000 daN) * Recesses above the lashing rings on the top chord of the outer beams * 1 Lashing ring hanging outside on the left and right of the rear cross member (LC 10,000 daN) * On the outer beams of the loading area, prepared for the removable loading floor * Hook-on rail at the front of the rear chassis to the low bed for loose loading ramps * Chassis with beveled corners at the rear * Hook-on rail for loose aluminum loading ramps on the vehicle's end cross member * Steering can be operated from the front and rear via cable remote control using push buttons, with axle alignment control, without installation in the tractor unit * Mechanical bolt-and-lug coupling from the low bed to the chassis, for replacing the loading area or installing extension beams, with electro-pneumatic-hydraulic couplings * Round NATO socket on the front connection panel (Maeler & Kaege VG 96 917) * 2 axle load gauges mounted on the left side Including special accessories * 1 pair of plug-in gauges on the gooseneck Aluminum side walls, approx. 400 mm high, anodized finish * A plug-in aluminum rear wall on the gooseneck, approx. 400 mm high, anodized finish * Cen

Condition: used, mileage: 16,811 km, power: 125 kW (169.95 HP), fuel type: diesel, gearing type: mechanical, overall weight: 3,500 kg, first registration: 02/2024, next inspection (TÜV): 02/2026, loading space length: 4,400 mm, loading space width: 1,780 mm, loading space height: 1,940 mm, loading space volume: 15 m³, emission class: euro6, color: black, number of seats: 3, Year of construction: 2024, Equipment: air conditioning, navigation system, SPRINTER 317 CDI MAXI panel van with high roof * Gross list price new ¤ 71.000,-- + * Vehicle no. for customer inquiries: 4101 * Emission class Euro 6d N1 * Semi-automatically controlled air conditioning TEMPMATIC * 3 years free map data updates * Active Brake Assist * OM 654 DE 20 LA 125 kW (170 hp) 3800 rpm * Live Traffic Information * Rain sensor * Heating for front passenger seat * Wooden floor * Airbag front passenger * Airbag driver * ATTENTION ASSIST * Crosswind assist * Wheelbase 4325 mm, overhang 1615 mm * Cruise control system (cruise control) * Heat-insulating glass all round * Storage compartment above windshield * Electrically adjustable and heated exterior mirrors, both * Fog lights with cornering light * Heating for driver's seat * Electric folding door mirrors * Rear hinged doors, opening up to side wall * Interior trim in load compartment up to roof height, washable * Sliding door load/passenger compartment right * Driver comfort suspension seat, Grammer * Parking package with reversing camera * Mercedes-Benz emergency call system * Instrument panel load package * MBUX multimedia system with 7-inch touchscreen * Navigation * DAB tuner (digital radio reception) * High roof * Multifunction steering wheel * Front axle with increased load capacity * Environmental badge (green) * Three-seater * Maintained checkbook * Full-length partition wall * 4/5 doors No liability for printing and typing errors Sale only to traders Subject to errors and prior sale* Changes, prior sale and errors are expressly reserved. The description serves to identify the vehicle and does not constitute a warranty in the sense of sales law. The description according to the sales contract is decisive. * TOP SERVICE + QUALITY * We are happy to make you a LEASING-FINANCING-PURCHASE offer Warranty insurance available on request from the insurer * TÜV / UVV LBW / speedometer check and installation of OBU device by our local partners * Customs license plate for 30 days All customs documents for export are possible, but must be requested individually Djlq Sx Rjviz Ivefokl * MAUT for Toll-Collect can be booked in-house * Free transfer from Stuttgart airport or Metzingen (Württ) train station * TRAIN STATION FOR ARRIVAL/TRAIN STATION: 72555 METZINGEN/WÜRTT. * FOR ENGLISH * Andreas Pittas * Thomas Pittas * Alexander Pittas * Robin Pittas WHATSAPP number * * ---- Visit us on our website at * constantly over 150 vehicles in stock

Condition: used, Year of construction: 2017, operating hours: 3,231 h, JCB 540-170 telehandler from 2017 with only 3,231 operating hours! ----* Manufacturer: JCB * Type: 540-170 4x4x4 * Lifting height: 17 meters * Load capacity: 4 tons * Year of manufacture: 2017 * Operating hours read: approx. 3,231 * Sway = leveling system * Power: 55 kW * Operating weight: 12,300 kg * Good condition! Dkelqovtkfxs Sx Rfel * Good tires! * Loading forks * Auxiliary hydraulics * Rear view camera * Cabin * Windshield protection grille * Video available upon request * Additional photos available upon request * Bucket available for an additional charge! * Price: €49,900, net + 19% VAT. For further questions, please call: For further questions, please call: Erik Kortum: WhatsApp Kai Kortum: WhatsApp

Condition: used, mileage: 30,062 km, power: 390 kW (530.25 HP), first registration: 12/2022, fuel type: diesel, color: white, axle configuration: 8x4, tire size: 385/65R22.5, fuel: diesel, wheelbase: 4,200 mm, brakes: retarder, gearing type: automatic, emission class: euro6, suspension: steel-air, loading space width: 2,450 mm, loading space length: 6,400 mm, loading space height: 900 mm, Year of construction: 2022, Equipment: ABS, air conditioning, crane, cruise control, differential lock, retarder, traction control, trailer coupling, = Additional Options and Accessories = - AdBlue System - Differential Lock - Electric Windows - Remote Central Locking - Lift Axle - Jaw Coupling Dkelqjv Uilms Sx Rfjl - Engine Brake - PTO - Radio - Sun Visor = Remarks = Belgian Documents. 10,000 kg front axle. 8x4 with lift and steering axle. Retarder. Fassi crane: Type F275A.2.24 Scanreco radio remote. Hydraulic outriggers. 4 x hydraulic extension. Rotator + graph. 2.80 m - 8,000 kg. 4.50 m - 5,365 kg. 6.35 m - 3,645 kg. 8.30 m - 2,680 kg. 10.25 mtr - 2,105 kg. 12.25 mtr - 1,745 kg. Ringfeder trailer coupling 50 mm. Stainless steel toolbox. = Further information = Technical information Number of cylinders: 6 Drivetrain AdBlue system: Yes Axle configuration Brakes: Disc brakes Front axle: Tire size: 385/65R22.5; Steered; Left tire profile: 80%; Right tire profile: 80%; Suspension: Leaf spring Rear axle 1: Tire size: 315/80R22.5; Twin tires; Left tire profile inside: 80%; Left tire profile outside: 80%; Right tire profile inside: 80%; Right tire profile outside: 80%; Suspension: Air suspension Rear axle 2: Tire size: 315/80R22.5; Twin tires; Tire profile left inner: 80%; Tire profile left outer: 80%; Tire profile right inner: 80%; Tire profile right outer: 80%; Suspension: Air suspension Rear axle 3: Tire size: 385/65R22.5; Steered; Tire profile left: 80%; Tire profile right: 80%; Suspension: Air suspension Dimensions Dimensions (L x W x H): 1009 x 254 x 366 cm Weight Empty weight: 18,155 kg Payload: 22,845 kg GVW: 41,000 kg Functional Crane: Fassi Identification Type number: CF 530 8x4-4 / FASSI 27.5 t/m CR = Company information = ALL PRICES ARE NET FOR EXPORT, Joris Versteijnen (NL-DE-GB) Wouter Greutink (NL-DE-GB-ES-IT) We make every effort to provide correct information, but no rights can be derived from the posted texts.

Condition: used, Year of construction: 2008, operating hours: 6,123 h, mast type: telescopic, fuel type: diesel, Year of manufacture: 2008 Field of application: Construction Drive: Track GVW: 4.220 kg CE mark: yes Teupen Leo 30 T. Year: 2008. Hours: 6123. Weight: 4220 kg. CE machine. Max capacity basket: 200 kg / 2 persons + 40 kg. Max lateral force: 400 N. 230 V 50 Hz 16 A. Max permitted tilt: 1 degree. 4 point outriggers. Rotated basket. Non marking tracks. Widened UC. Diesel. Electrical function in basket. ID NR: 237. Dslq Sxev Upkps Rfekl The General Terms and Conditions of Heinhuis are applicable to all adverts, offers and quotations by Heinhuis, all agreements entered into by Heinhuis and the negotiations preceding them. By any form of response you accept the applicability of the General Terms and Conditions of Heinhuis and you declare that you have taken note of these General Terms and Conditions. Our prices are export netto prices.

Condition: excellent (used), Year of construction: 1976, strip width: 400 - 2.100 mm strip thickness: 0,5 - 3 mm coil weight: 40 t coil ID: 508/610 mm Delq Sx Reqw Aacefokl

Condition: used, Year of construction: 1998, x-travel 1.250 mm y-travel 880 mm z-travel 800 mm control TNC 426 Heidenhain turning speed range - main spindle max. 12.000 min/-1 power capacity - main spindel 15 / 10 kW max. Torque 500 Nm tool taper SK 40 Dkjlev H Epfsq Sx Rfsl table surface area 1.500 x 1.050 mm max. table load 2.500 kg number of T-slots 10 T-slot - width 18 H7 mm T-slot - distance 100 mm number of toolpositions 30 pos. max. tool diameter 80 mm max. tool-dia with free toolbox 160 mm max. tool length 315 mm max. tool weight 8 kg max. total weight 100 kg rapid traverse ( X / Y / Z ) 15 m/min feed speeds 10.000 mm/min total power requirement 29 kW weight of the machine ca. 16,0 t dimensions of the machine ca. 7,0 x 5,0 x 3,3 m CNC - Machining Center Vertical DECKEL MAHO - DMU 125 T - ICS

Condition: used, mileage: 531,692 km, power: 235 kW (319.51 HP), first registration: 03/2011, fuel type: diesel, color: other, tire size: 385/55/22.5, fuel: diesel, wheelbase: 5,100 mm, driver cabin: sleeper cab, gearing type: automatic, emission class: euro5, Year of construction: 2011, Equipment: ABS, cruise control, sleeping cabin, = Further options and accessories = Dkelqsv Uaxwe Sx Rfjl - (Roof) spoiler - Aluminum fuel tank - Windows with electric controls - Low noise - Speed limiter - Rear doors - Air suspension - Fog lights - Radio/CD player - Side mirrors with electric adjustment - Sun glare protection - Stability control - Digital speedometer - Spotlights - Central door locking = Further information = Brakes: Disc brakes Tire size front: 385/55/22.5 Tire size rear: 315/70/22.5 Curb weight: 8,145 kg Payload: 10,855 kg GVW: 19,000 kg Dimensions (L x W x H): 725 x 250 x 240 cm Damage: none License plate: 2BPP974

Condition: used, mileage: 288,000 km, power: 360 kW (489.46 HP), first registration: 01/2022, overall weight: 18,000 kg, fuel type: diesel, color: red, axle configuration: 2 axles, next inspection (TÜV): 01/2026, brakes: retarder, gearing type: automatic, Year of construction: 2022, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, RENAULT T 480 HIGH RETARDER ALCOA HYDRAULIC TILTING FULL COVERING ----VEHICLE HISTORY * FIRST OWNER * GERMAN VEHICLE * VIDEO AVAILABLE UPON REQUEST * VEHICLE WAS ONLY DRIVED BY THE BOSS * ALL SERVICES ONLY AT RENAULT VEHICLE EQUIPMENT * AUTOMATIC * RETARDER * CRUISE CONTROL * ADAPTABILITY CONTROL (ACC) * LANE KEEPING ASSIST * ACTIVE BRAKE SYSTEM * ALCOA ALLOY WHEELS * FULL COVERING * NAVIGATION / ON-BOARD COMPUTER * AIR CONDITIONING * Auxiliary HEATING * 2 BEDROOM * REFRIGERATOR / COMFORT SEATS Heated seats * Front axle leaf spring suspension * Xenon headlights * Roof lights * Rear axle air suspension * AdBlue * 2 tanks * Tire size: * Front: 385/65 R22.5 * Rear: 315/80 R22.5 * Good tires * Ready to use immediately ---- * Export sales only with a deposit of 500 - 2000 euros * Export sales only with a deposit of 500 - 2000 euros Export declaration required for customs clearance within 10 minutes. (AUTHORIZED EXPORTER) 5-DAY, 15-DAY, 30-DAY LICENSE PLATE AND 15-DAY AUSTRIAN LICENSE PLATE EURO 1 TECHNICAL DATA SHEET (DATA TECNICI) VEHICLE RESERVATIONS PLEASE ONLY VIA EMAIL VERBAL RESERVATIONS ARE NOT VALID For sales to the EU and third countries, a deposit of at least €500.00 / €1,000.00 will be charged. Subject to changes, errors, and advance sales! You can find more vehicles on our website. Sales are subject exclusively to our terms and conditions. See homepage Important notice? Important information: Despite careful review of all details in our offer, errors may occur. These are sometimes caused by transmission errors in the systems of the various platform providers. Therefore, we would like to point out that all information is provided without guarantee and does not constitute a legal claim. Legal information: This sales advertisement does not constitute an offer within the meaning of Section 145 of the German Civil Code (BGB). Rather, it is information for the purpose of contract initiation. The information provided here is without guarantee and therefore does not represent any guaranteed properties. Dslq Sewapwljx Rfskl

Condition: used, mileage: 30,062 km, power: 390 kW (530.25 HP), fuel type: diesel, color: white, axle configuration: 8x4, tire size: 385/65R22.5, fuel: diesel, wheelbase: 4,200 mm, brakes: retarder, gearing type: automatic, emission class: euro6, suspension: steel-air, loading space width: 2,450 mm, loading space length: 6,400 mm, loading space height: 900 mm, Year of construction: 2022, Equipment: ABS, air conditioning, cruise control, differential lock, retarder, traction control, trailer coupling, = Additional Options and Accessories = Delq Sx Rev Uik Nofskl - AdBlue System - Differential Lock - Electric Windows - Remote Central Locking - Lift Axle - Jaw Coupling - Engine Brake - PTO - Radio - Sun Visor = Remarks = Belgian Documents. 10,000 kg front axle. 8x4 with lift and steering axle. Retarder. Fassi crane: Type F275A.2.24 Scanreco radio remote. Hydraulic outriggers. 4 x hydraulic extension. Rotator + graph. 2.80 m - 8,000 kg. 4.50 m - 5,365 kg. 6.35 m - 3,645 kg. 8.30 m - 2,680 kg. 10.25 mtr - 2,105 kg. 12.25 mtr - 1,745 kg. Ringfeder trailer coupling 50 mm. Stainless steel toolbox. = Further information = Technical information Number of cylinders: 6 Drivetrain AdBlue system: Yes Axle configuration Brakes: Disc brakes Front axle: Tire size: 385/65R22.5; Steered; Left tire profile: 80%; Right tire profile: 80%; Suspension: Leaf spring Rear axle 1: Tire size: 315/80R22.5; Twin tires; Left tire profile inside: 80%; Left tire profile outside: 80%; Right tire profile inside: 80%; Right tire profile outside: 80%; Suspension: Air suspension Rear axle 2: Tire size: 315/80R22.5; Twin tires; Tire profile left inner: 80%; Tire profile left outer: 80%; Tire profile right inner: 80%; Tire profile right outer: 80%; Suspension: Air suspension Rear axle 3: Tire size: 385/65R22.5; Steered; Tire profile left: 80%; Tire profile right: 80%; Suspension: Air suspension Dimensions Dimensions (L x W x H): 1009 x 254 x 366 cm Weight Empty weight: 18,155 kg Payload: 22,845 kg GVW: 41,000 kg Functional Crane: Fassi Identification Type number: CF 530 8x4-4 / FASSI 27.5 t/m CR = Company information = ALL PRICES ARE NET FOR EXPORT, Joris Versteijnen (NL-DE-GB) Wouter Greutink (NL-DE-GB-ES-IT) We make every effort to provide correct information, but no rights can be derived from the posted texts.

Condition: used, Year of construction: 2002, x-travel 880 mm y-travel 630 mm z-travel 630 mm table surface area 1250 x 700 mm NC-rotary table integriert, 700 mmø spindle taper SK 40 spindle taper DIN 69871 spindle turning speed - stepless 20 - 12.000 U/min control HEIDENHAIN control TNC 430 feeds x/y/z -stepless 20 - 15.000 mm/min rapid traverse 30 m/min ATC 32 (2 x 16) Pos tool diameter 80 / 130 mm workpiece length 315 mm weight of tools max. 8 kg NC-rotary table - speed - max. 15 U/min table load 600 / 500 kg milling head -swivable +/- 12 / 90 ° total power requirement 60 kW weight of the machine ca. 9,6 t dimensions of machine L x W x H 4,53 x 2,60 x 2,50 m = 5-axis machining center, table clamping surface 1250 x 700 mm with integrated NC-rotary table (=4th axis), movement of milling head via control (=5th axis) Accessories: electron. handwheel, chip conveyor (snailconveyor), Dkjlq Sxotqqmbs Rfjl coolant

Condition: excellent (used), Year of construction: 1980, strip width: 1.500 mm strip thickness: 3 mm Dolqjqw Akmo Sx Rfokl coil weight: 10 t

Condition: good (used), Year of construction: 2015, operating hours: 3,544 h, fuel type: diesel, color: black, General information Field of application: Construction Serial number: 0047 Weights Empty weight: 7.040 kg Functional Mast: articulated arm Lifting capacity: 227 kg Working height: 1.600 cm Condition Technical condition: good Visual appearance: good Other information EPA Marked: yes Delivery terms: EXW Dslq Sxeq R Rf Ue Rfokl Additional information Please contact Vink Machinery for more information Snorkel T46 JRT * 2015 * 3544 Hours * Working height: 16 m * Horizontal reach: 12.2 m * Diesel * Weight: 7040 kg * Wheel drive * Inspection until 9-2023 * Including all documents EXTRA LARGE BASKET!!

Condition: good (used), fuel type: electric, We sell the forklift with both blades and clamp. The forklift was originally purchased from factory with clamp and can only lift 3,5T in that setup. This is the reason why on the serial plate it's written only 3,5T. Dkolq Sskvn A Hox Rfol This model of forklift, with the blades mounted, can lift 5,5T. Forklift weight: 9670 kg

Condition: excellent (used), mileage: 525,000 km, power: 259.66 kW (353.04 HP), first registration: 12/2018, color: white, brakes: VEB, 2018 RENAULT T 480 CLIMATE STATIONARY, FRIDGE, DOUBLE TANK Dkelq Sx Rjwa D Aisfel

Condition: used, mileage: 1,213,970 km, power: 302 kW (410.61 HP), first registration: 09/2004, fuel type: diesel, color: red, axle configuration: 6x2, tire size: 385/65R22.5, fuel: diesel, wheelbase: 4,500 mm, brakes: engine braking, gearing type: automatic, emission class: euro3, suspension: steel-air, loading space width: 2,480 mm, loading space length: 6,100 mm, loading space height: 1,200 mm, Year of construction: 2004, Equipment: ABS, air conditioning, crane, cruise control, differential lock, traction control, trailer coupling, = Other options and accessories = - Differential lock - Electric windows - Lift axle - Jaw coupling - Disc brakes - Sun visor - Spotlights - Toolbox - Central locking = Remarks = Dolq Sxjv Uikvj Rfskl Dutch truck with valid technical inspection till: 24-08-2025 Palfinger PK 42502 4 x hydraulic outrigger. 5 x hydraulic extension. Scanreco radio - remote control. max: 13.140 kg. 4.40 mtr - 8.820 kg. 5.90 mtr - 6.430 kg. 7.80 mtr - 4.650 kg,. 9.90 mtr - 3.610 kg. 12.00 mtr - 2.930 kg. 14.30 mtr - 2.440 kg. = More information = Technical information Number of cylinders: 6 Axle configuration Brakes: disc brakes Front axle: Tire size: 385/65R22.5; steered; tire profile left: 50%; tire profile right: 50%; suspension: leaf spring Rear axle 1: Tire size: 295/80R22.5; tire profile left: 80%; tire profile right: 80%; suspension: air suspension Rear axle 2: Tire size: 385/55R22.5; tire profile left: 20%; tire profile right: 20%; Suspension: air suspension Dimensions Dimensions (L x W): 955 x 255 cm Weights Empty weight: 16,370 kg Payload: 11,630 kg GVW: 28,000 kg Functional Crane: Palfinger Maintenance APK (technical main inspection): tested until 08.2025 Identification Type number: ACTROS 2541 6X2 / PALFINGER PK 4 = Company information = ALL PRICES ARE NET FOR EXPORT, Joris Versteijnen NL-DE-GB) Wouter Greutink NL-DE-GB-ES-IT) Govorim po ryccki We do our best to provide correct information, but no rights can be derived from the texts posted.

Condition: good (used), Year of construction: 1998, x-travel 500 mm y-travel 400 mm z-travel 400 mm Dkjlqev H Sdvs Sx Rfsl Control Heidenhain weight of the machine ca. 3,2 t

Year of construction: 1986, Condition: excellent (used), strip width: 650 mm strip thickness: 0,4 - 3 mm Dkslqefpwkqs Sx Rfsl No. of slits/strip thickness: 15/1 mm, 6/3 mm coil weight: max. 5 t

Condition: good (used), mileage: 660,000 km, power: 353.04 kW (480.00 HP), first registration: 12/2018, color: white, brakes: intarder, 2019 RENAULT T 480 AUTOMATIC TRANSMISSION, VOITH, ADR Dolswa Dzxeq Sx Rfskl

Condition: used, mileage: 349,116 km, power: 235 kW (319.51 HP), first registration: 08/2016, fuel type: diesel, color: green, axle configuration: 4x2, tire size: 315/80R22.5, fuel: diesel, wheelbase: 5,100 mm, brakes: engine braking, gearing type: automatic, emission class: euro6, suspension: air, loading space width: 2,490 mm, loading space length: 6,900 mm, loading space height: 1,160 mm, Year of construction: 2016, Equipment: ABS, air conditioning, crane, cruise control, differential lock, tail-lift, traction control, trailer coupling, = Additional Options and Accessories = - AdBlue System - Differential Lock - Electric Windows - Remote Central Locking - Air Suspension - Jaw Coupling - PTO - Radio - Disc Brakes - Heated Seats - Sun Visor - Toolbox = Remarks = Palfinger PK 14002 - D Scanreco radio - remote control. 2 x hydraulic outriggers. 5 x hydraulic extensions. Dkjlqov Uii Es Sx Rfol 4.20 mtr - 2,850 kg. 6.20 mtr - 1,780 kg. 8.20 mtr - 1,240 kg. 10.30 mtr - 930 kg. 12.50 mtr - 740 kg. 14.60 mtr - 630 kg. Palfinger tail lift: 1,500 kg. = Further information = Technical information Number of cylinders: 6 Drivetrain AdBlue system: Yes Axle configuration Brakes: Disc brakes Suspension: Air suspension Front axle: Tire size: 315/80R22.5; Left tire profile: 25%; Right tire profile: 25% Rear axle: Tire size: 315/70R22.5; Dual tires; Left tire profile inside: 70%; Left tire profile outside: 70%; Right tire profile inside: 70% Tire tread depth, right outside: 70% Dimensions Dimensions (L x W): 1030 x 255 cm Weight Empty weight: 11,685 kg Payload: 7,815 kg GVW: 19,500 kg Functional Crane: Palfinger Identification Type number: P320 4x2 / PALFINGER 14 t/m - 14 = Company information = ALL PRICES ARE NET FOR EXPORT, Joris Versteijnen (NL-DE-GB) Wouter Greutink (NL-DE-GB-ES-IT) We make every effort to provide correct information, but no rights can be derived from the posted texts.

Year of construction: 1971, Condition: good (used), decoiler - expansion mandrel with coil lifting table strip width: 1.200 mm Delsd Ha E Ssq Sx Rfekl strip thickness: 0,3 - 5 mm coil weight: 10 t mandrel Ø: 508 mm

Year of construction: 1967, Condition: good (used), strip width: 300 - 1.250 mm strip thickness: 0,5 - 3 mm Delqjd Ha E Ij Sx Rfekl coil weight: 6 t mandrel Ø: 508/610 mm

Year of construction: 1985, Condition: excellent (used), strip width: 10 - 350 mm strip thickness: 0,2 - 2 mm Dkelolilgcoq Sx Rfel No. of slits/strip thickness: 25/0,5 mm coil weight: max. 1 t

Year of construction: 1985, Condition: excellent (used), strip width: 10 - 350 mm Dolq Sxolilfbe Rfskl strip thickness: 0,2 - 2 mm No. of slits/strip thickness: 25/0,5 mm coil weight: max. 1 t