Used Hitachi Ex22 for sale (93)

Condition: used, fuel type: diesel, Equipment: air conditioning, AdBlue system: Yes Year of manufacture: 2018 Operating hours: 7.882 Drive: Wheel Crodpfsza Rn Rex Acloi Empty weight: 19.580 kg Make of engine: Isuzu Top speed: 35 km/h Please contact Kristoff Van Havere for more information = Additional options and accessories = - 2-piece boom - Ad blue - Additional hydraulics - Auto / hydraulic quick coupler - Auto lubrication system - Battery disconnector - Blade - Boom suspension - Hammer/shear hydr. circuit - Hydraulic adjustable boom - Pressurized cabin - Quick coupler - Rotating beacon - Safeload indicator - Safety line rupture valve - boom/hoist - Safety line rupture valve - dipper/stick - Slope/rotator hydr. circuit = Remarks = - Hydraulic quick hitch CW30 - Bucket 1800mm - Piping for hammer and sorting grab - Central grease system - Auxiliary piping for hammer and sorting grab - Cab overpressure filter unit

Condition: used, lifting height: 5,920 mm, Equipment: air conditioning, Year of construction: 2023 Operating hours: 2.854 Empty weight: 8.500 kg Dimensions (LxBxH): 704 x 220 x 255 cm Digging depth: 4.43 m Crjdpszzqnlofx Aclji = Additional options and accessories = - Digger blade - Rubber tracks

Condition: ready for operation (used), functionality: fully functional, fuel type: diesel, color: orange, overall weight: 8,650 kg, chain condition: 100 %, number of seats: 1, mast type: mono, Year of construction: 2019, operating hours: 4,805 h, Equipment: additional headlights, air conditioning, hammer hydraulics, low noise, onboard computer, rubber tracks, Rubber-tracked excavator Hitachi ZX85USB85-6 Crsdpfezta Ulex Aclji 4,805 hours 1 bucket Front blade Very good overall condition Ready for use. More information on the Almerisan website.

Condition: used, Year of construction: 2017, operating hours: 7,963 h, * Swivel bucket * OQ 70/55 * Grading blade * Rearview camera * Weight: 19,630 kg * Power: 128.4 kW -----Internal vehicle number: 12321 Cedpfezpg Eiex Aclsri Errors and prior sale excepted.

Condition: used, Year of construction: 2001, x-travel 600 mm y-travel 580 mm z-travel 580 mm control SEICOS 16M B-axis (table) 360 x 1° mm feed X/Y/Z/-axis 1 - 50.000 mm/min rapid traverse X/Y/Z 50,00 m/min turning speed range - stepless 35 - 12.000 Nm spindle drive 22,00 kW max. torque on the spindle 236 tool taper BT40 toolpiece magazine: chain magazine 61 Stück size of pallet 2x 400x400 mm max. workpiece diameter 630 mm workpiece height max. 680 mm workpiece weight max. 400 kg total power requirement 30,00 kW Codpszugf Tofx Aclori weight of the machine ca. 12,00 t dimensions of the machine ca. 4,00 x 3,50 x H3,00 m With SEICOS S16M control unit, coolant system, chip conveyor, electron. handwheel, dust exhauster.

Condition: used, fuel type: diesel, fuel tank capacity: 42 l, Year of construction: 2024 Operating hours: 660 Empty weight: 3.700 kg Cjdpoy Nw D Sefx Acleri Dimensions (LxBxH): 453 x 155 x 248 cm Engine type: Yanmar 3TNV88 Digging depth: 2.33 m = Additional options and accessories = - Digger blade

Condition: used, Year of construction: 2012, Operational condition machines. Ask for specification and details. 2 units available! Cjdpfx Ajywi Apeclsri

Condition: used, color: other, Year of construction: 2018 Operating hours: 3.773 Drive: Wheel Power internal combustion engine: 1722 HP (1267 kW) GVW: 18.600 kg Make of engine: ISUZU CE mark: yes Serial number: HCMLBE5ZH00040393 Machines for Sale Browse our website for a variety of machines ready for purchase. We have more options than what you see online, so feel free to call or email us anytime. All our machines are fully maintained and checked for reliability. Need pictures? Just contact us, and we'll share them promptly.   Cjdpfxoy R Db Hj Acleri We're here to assist you in Dutch, English, French, German, Spanish and Russian. Discover our wide range of reliable machines. 

Condition: good (used), Year of construction: 2000, functionality: fully functional, CNC lathe, HITACHI SEIKI, type HT 23-RIII, year 2000 SEICOS L MULTI DIALOG control system. Maximum turning diameter: 450 mm Maximum turning length: 630 mm Tool turret with 12 positions VDI 40 Chuck diameter: 250 mm Spindle bore: 78 mm Spindle speeds: 30-4000 rpm Rapid traverse: X and Z 30 m/min Chip conveyor. For further information, see data sheets. Credpfxsv T Un Dj Aclsi The machine is in good condition and can be demonstrated under power. Machine documentation is available.

Condition: used, mileage: 5,670 km, power: 29 kW (39.43 HP), gearing type: other, fuel type: diesel, color: orange, overall weight: 5,000 kg, empty load weight: 4,600 kg, operation weight: 5,000 kg, maximum load weight: 400 kg, number of seats: 1, first registration: 06/2019, Year of construction: 2019, operating hours: 5,670 h, driver cabin: other, Equipment: air conditioning, cabin, head guard, onboard computer, standard shovel, * German machine * Only 5,670 operating hours * Condition, see photos * Adjustable boom * Hydraulic quick coupler * Additional hydraulic circuits * Swivel trench bucket * Hydraulic dozer blade 2,000 mm * 1,690 mm boom * Max. reach 6,260 mm * Overall width 2,000 mm * Compact mini excavator with short tail swing * Ideal for working in confined spaces * 400 mm undercarriage, rubber tracks, NEW * ROPS comfort cab - OPG protective roof * Air conditioning * All controls are easily accessible for the operator, and the hydraulically pre-controlled joysticks and control levers also ensure high control precision * Travel speeds ... High range: 0 to 4.2 km/h, Low range: 0 to 2.5 km/h * Windshield can be slid upwards * Sliding window on the right * Heater * Large LCD multi-function monitor * Excellent all-around visibility * Stereo Crjdpfx Aezfmmxoclsi * Windshield wiper * 4-cylinder, 29.1 kW * Easy maintenance thanks to various maintenance hatches * Total weight 5,000 kg If a new TÜV inspection is desired, we will be happy to provide you with a quote from our partner workshops. Our offer generally does NOT include a new TÜV inspection, a new DGUV, a new SP, or a new UVV. You can find more trucks on our website under: We speak the following languages: German, English, Polish, Turkish Note: We strongly recommend and offer an inspection and examination of the goods so that the buyer does not have any false impressions about the condition and suitability. Inspections and examinations are possible at any time by appointment and are expressly desired. All information is without guarantee. We are not liable for errors or incorrect information in the offer. The buyer is obliged to independently verify the condition and equipment of the goods/vehicles. Subject to changes, prior sale and errors.

Condition: used, Year of construction: 2008, operating hours: 10,526 h, 2008 | Hitachi ZX350LC-3 with standard earth boom and long-front boom | Used Demolition Excavator | 10526 hours 📍Location: France Cedpey Azpxsfx Acleri 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 66000 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 63 inspection points 50 approved ✅ 13 imperfect ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: Some small repairs to be anticipated, maintenance followed with complete history: handlers, numerous hoses, seals, belts... An excavation boom and a long demolition arm approximately 14 m in length. 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "40542 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: excellent (used), power: 133 kW (180.83 HP), fuel type: diesel, color: other, number of seats: 1, first registration: 08/2016, Equipment: air conditioning, = Additional options and accessories = - PTO = Remarks = Condition Cjdpfx Ajz Rzhgecleri CE type: CE = More information = General information Year of construction: 2016 Operating hours: 6.868 Cab: day Technical information Number of cylinders: 4 Engine capacity: 5.193 cc Track width: 259 cm Empty weight: 26.400 kg Dimensions (LxBxH): 1036 x 319 x 307 cm Functional Maximum reach: 1.001 cm Quick coupler system: Yes CE mark: yes Condition Technical condition: very good Visual appearance: very good

Condition: used, Year of construction: 1997, machine/vehicle number: VM40027E, functionality: fully functional, travel distance X-axis: 500 mm, travel distance Y-axis: 550 mm, travel distance Z-axis: 400 mm, spindle speed (max.): 8,000 rpm, X-axis - 500mm, Y-axis - 550mm, Z-axis - 400mm. Codjvm Utmepfx Aclori Speed 8000 rpm. CNC control - Seicos MYII

Year of construction: 2023, condition: good (used), functionality: unexamined, machine/vehicle number: SRV54341, Ladies and Gentlemen, We are selling the Hitachi FT230 XRF analyzer described and photographed here. Excerpt from the manufacturer: Each individual element of the FT200 series has been developed to drastically reduce the analysis time. Automated focusing reduces sample loading time Intelligent recognition with the Find My Part™ function automatically sets up the complete measurement routine Sample view is displayed over a large part of the screen for excellent visibility Self-diagnostics confirm the condition and stability of the device Seamless integration with other software and easy data export Intuitive and easy to use thanks to a new user interface Powerful: simultaneous measurement of up to four layers and substrates Designed for demanding production or laboratory environments Complies with ASTM B568 and DIN ISO 3497 standards Supports you in meeting the specifications for ENIG (IPC-4552B), ENEPIG (IPC-4556), Immersion Sn (IPC-4554) and Immersion Ag (IPC-4553A) Further information: Detector: Silicon Drift Detector (SDD) Element range: Al (13) - U (92) Stage travel: 250 x 200 mm Motorized Z-axis movement: 205 mm Maximum sample size: 500 x 400 x 150 mm Laser focus: Standard Coating thickness analysis: possible RoHS screening: possible Further information and images of the machine are available on request. Disclaimer The machines offered are sold "as is" and "without warranty". Any express or implied warranties, including, but not limited to, warranties of merchantability or fitness for a particular purpose, are hereby expressly disclaimed. Seller assumes no responsibility for the operability, reliability or accuracy of the machine. It is the buyer's responsibility to thoroughly inspect the machine prior to purchase and ensure that it meets his requirements. Any descriptions or specifications of the machine are for information purposes only and may contain inaccuracies or errors. The seller shall not be liable for any such inaccuracies or errors and assumes no obligation to update or correct such information. Buyer agrees that Seller shall not be liable for any damages or losses arising directly or indirectly from the purchase, use or inability to use the machine, including, but not limited to, lost profits, business interruption or consequential damages. Crjdpfxeuwkr Do Aclei Any repairs or modifications to the machine after purchase are the sole responsibility of the buyer. Seller shall not be liable for damages caused by improper repairs or modifications. By purchasing the machine, the buyer expressly agrees to the terms of this disclaimer and waives any claims against the seller in connection with the purchase or use of the machine.

Condition: new, Year of construction: 2025, functionality: fully functional, type of input current: AC, overall weight: 18,000 kg, input voltage: 20,000 V, input frequency: 50 Hz, total height: 4,850 mm, total width: 3,400 mm, total length: 3,600 mm, nominal power (apparent): 11,500 kVA, secondary voltage: 690 V, protection type (IP code): IP23, temperature: 40 °C, Equipment: type plate available, Hitachi Energy RESIBLOC® Cast Resin Transformer – 11.5 MVA – New & Unused For sale is a high-quality Hitachi Energy RESIBLOC® cast resin transformer, which was procured for a project but never put into operation. Since delivery, the transformer has been stored exclusively under professional conditions and is therefore factory-new and unused. The transformer is ideally suited for applications in power supply, battery storage projects (BESS), industrial plants, data centers, and other energy-intensive infrastructure projects. Technical data * Manufacturer: Hitachi Energy Germany AG * Type: RESIBLOC® Cast Resin Transformer * Condition: New, unused, never in operation * Rated power: 11,500 kVA (11.5 MVA) * Primary voltage: 20 kV (switchable to 10 kV) * Secondary voltage: 690 V * Frequency: 50 Hz * Connection group: Dyn5 * Protection class: IP23 * Cooling: AN (natural air cooling) * Design for outdoor installation * Including busbar system Codpfozkmtpex Aclsri * Total weight: approx. 18,000 kg * Dimensions (L × W × H): 3,600 × 3,400 × 4,850 mm Condition * Factory-new * Never electrically connected * Never put into operation * Stored exclusively * Technical documentation available Inspection possible by arrangement. Assistance with loading and transport can be organized if required.

Condition: ready for operation (used), Year of construction: 2001, travel distance X-axis: 850 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 850 mm, controller manufacturer: FANUC, table width: 630 mm, table length: 630 mm, overall weight: 15,000 kg, spindle speed (max.): 10,000 rpm, spindle motor power: 45,000 W, number of axes: 4, This 4-axis HITACHI SEIKI HS630 was manufactured in 2001. It features a travel of 850 mm on the X-axis, 800 mm on the Y-axis, and 850 mm on the Z-axis. The machine has a table work area of 630 x 630 mm and a maximum pallet load capacity of 1200 kg. If you are looking to get high-quality machining capabilities, consider the HITACHI SEIKI HS630 horizontal machining centre we have for sale. Contact us for further details. Codpfx Aez Dud Toclsri - Recent Maintenance / Upgrades: Equipped with new linear guides on Y-axis, refurbished ball screw with new bearings- Control System: Seikos Lambda / Fanuc Control- Table Work Area: 630 x 630 mm- Indexing Angle: 1° (360°)- Indexing Method: Absolute, 3-position- Pallet Load Capacity: Max. 1200 kg- Distance Spindle Center to Table Surface: 100 - 900 mm- Distance Spindle Nose to Table Center: 150 - 1000 mm- Spindle Taper: NT50 / NT40- Spindle Speed: 1.0 - 6000 rpm / 100 - 10000 rpm (Fully automatic & stepless)- Smallest Increment: 0.001 mm- Cutting Feedrate: 1 - 20000 mm/min- Jog Feedrate: 5000 mm/min- Rapid Traverse: 45000 mm/min- Spindle Motor (AC 50% ED): 30/45 kW (40/30 HP)- Hydraulic Motor: 2.2 kW (3 HP) - 4P- Lubrication Motor: 17-2 (0.02)-2 W (HP)-P- X-Axis Drive Motor: FANUC MODEL α30- Y-Axis Drive Motor: FANUC MODEL α40F- Z-Axis Drive Motor: FANUC MODEL α30- Table Indexing Motor: 1.0 kW (1.4 HP)- Spindle Cooling Motor: 0.4 kW (0.5 HP) - 4P- ATC Tool Capacity: 40 pieces (Optional 60 / 90 / 120 tools)- Max. Tool Diameter: Ø 125 mm- Max. Tool Length: 500 mm- Max. Tool Weight: 25 kg- Tool Selection Method: Any / Bi-directional via 2- and 4-digit T-Word- APC Exchange Method: Rotary type- Machine Weight: 15000 kg (33000 lbs)- Tool Shank Standard: BT50- Tool Shank Runout Tolerance: Max. 0.025 mm (Positions A & B)- Tool Shank Perpendicularity: 0.015/100 mm relative to plane A

Condition: used, Year of construction: 2012, operating hours: 6,492 h, 2012 | Hitachi ZX85USBLC-3 with 3 excavator buckets | Used Midi Excavator 7t - 12t | 6492 hours 📍Location: France 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 35000 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 66 inspection points 59 approved ✅ 7 imperfect ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: Various minor repairs needed on the dashboard screen, various dents on the bodywork, the boom has been repaired (good repair). 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "40889 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform. Cedpfxszgwrbj Acleri

Condition: used, Year of construction: 1997, machine/vehicle number: 50048, travel distance X-axis: 760 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 510 mm, table length: 510 mm, table width: 1,120 mm, X-axis - 760mm, Y-axis - 510mm, Z-axis - 510mm. Table size 1120x510mm. CNC control - Seicos A10M Credpfx Acovm Uvbolei

Condition: good (used), Year of construction: 1999, Manufacturer: Hitachi Seiki Model: VK45 II Year of manufacture: 1999 Machine type: Vertical CNC machining center Control system: SEICOS Σ10M / A10M X-axis travel: approx. 760 mm Y-axis travel: approx. 500 mm Z-axis travel: approx. 500 mm Crodpfx Acjzy Rbpelji Table: approx. 1,120 × 485 mm Max. table load: approx. 750 kg Tool changer: 30 positions Spindle speed: typically up to 8,000 rpm Tool holder: SK40 Weight: approximately 6,000–6,500 kg

Condition: used, Year of construction: 2022, operating hours: 1,890 h, Equipment: all wheel drive, soot filter, PL platform with TPD axles, ROPS cabin, Cummins B6.7 engine, air conditioning, aerial view camera, central lubrication system, quick coupler, class 3. Codpfxez Exdtj Acleri

Condition: ready for operation (used), A defective spare parts donor of a Hitachi Seiki lathe including an IEMCA bar feeder is available. 1) CNC lathe Hitachi Seiki GT 20 S II, travel X/Z: 200mm/400mm, max. turning diameter: 210mm, max. swing diameter over bed: 380mm, max. bar diameter: 51mm, spindle bore: 59mm, speed: 5000rpm, tool stations: 10, rapid traverse: 20m/min. Machine dimensions X/Y/Z: approx. 2350mm/1950mm/1850mm, weight: approx. 4100kg. The capacitors for the power connection are defective. 2) Hydraulic bar feeder IEMCA TAL/AUTO 65/32, max. bar diameter: 65mm, max. bar length: 3200mm, machine dimensions X/Y/Z: approx. 4200mm/800mm/1200mm, weight: approx. 800kg. The lathe is sold exclusively as a defective spare parts donor. An on-site inspection is possible. Cjdpfszka I Tjx Acljri

Condition: used, color: other, Year of construction: 2007 Operating hours: 7.514 Power internal combustion engine: 187 HP (138 kW) GVW: 11.500 kg Make of engine: ISUZU Lifting capacity: 6.500 kg CE mark: yes Serial number: HCM81U00T00030124 Cedpfx Asr Epviecljri Machines for Sale! Browse our website for a variety of machines ready for purchase. We have more options than what you see online, so feel free to call or email us anytime. All our machines are fully maintained and checked for reliability. Need pictures? Just contact us, and we'll share them promptly.   We're here to assist you in Dutch, English, French, German, Spanish and Russian. Discover our wide range of reliable machines. 

Condition: ready for operation (used), functionality: fully functional, power: 198.58 kW (269.99 HP), fuel type: diesel, empty load weight: 42,000 kg, Year of construction: 1987, operating hours: 13,800 h, machine/vehicle number: 16300999, Machine in working condition. Simple design with no electronic circuit boards (increased safety). Rock bucket: 850 mm. Earth bucket: 1750 litres. Total width: 3.30 m. Weight: 42 tonnes. Arm: 2.6 m. Functional, no repairs required. No oil leaks or smoke. Contact by phone in French, or by email in your language. Csdpfsxb Dhrjx Aclori

Condition: used, Year of construction: 2014, operating hours: 4,406 h, 2014 | Hitachi ZX135US-5B | Used Tracked Excavator | 4406 hours 📍Location: France 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 46400 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 66 inspection points 63 approved ✅ 1 imperfect ℹ️ 2 issues ⚠️ 📌 Inspector's Comment: Better condition than the others. Nothing to report except for the mirrors being dismantled and the tracks needing replacement. And a small dent on the cabin door does not prevent the door from closing. 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "40881 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options Credpjzg Nunsfx Aclji 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: used, Year of construction: 1999, turning diameter 450 mm Codpfx Ajvanvnocleri turning length 380 mm control FANUC