Used Tos Fgs 63 B for sale (24,167)

Condition: ready for operation (used), Indramat MAC093A-0-PS-2-C/110-B-0/S001 Permanent magnet motor , serial no. according to photo , hole spacing of mounting holes: 116 x 116 mm, Ø drive shaft: 24 mm ,used, small traces of use, 100% functional Dkeln Ufoi D Imyeukel

Condition: used, overall weight: 1,210 kg, load capacity: 165 kg, arm reach: 2,650 mm, controller model: RJ3i model B, repeat accuracy: 0.2 mm, Payload: 0/165 Kg Arm reach: 2.65 mmNumber of Axis: 6 Repeatability: 0.20 mm Robot weight: 1210 Kg Mounting: Floor Djlneruw A He Ufukokl

Condition: refurbished (used), Year of construction: 2018, machine/vehicle number: DF0150, pressure:63 t passage width:700 mm stroke:500 mm Approx. weight (w/o operational materials):5,1 t Measurements L x W x H:ca. 1500 x1600 x 2995 mm Return Capacity:6 t Engine Output:11 kW Max Working height:700 mm Approaching Speed max. :140 mm/sec Pressure Speed:15 mm/sec. Travel:500 mm Deln Ufjfhcc Ujukokl Ram plate:600 x 540 mm Table size:750 x 600 mm Table height above ground level:850 mm Oil Tank Capacity:150 l Control voltage:24 V Frequency:50 Hz Siemens Control System:S7 1200 Monitor:Siemens 12 Zoll Special feature: When operating at 260bar the machine reaches a pressure level of 70 tons.

Condition: used, mileage: 148,030 km, power: 335 kW (455.47 HP), gearing type: automatic, fuel type: diesel, color: yellow, overall weight: 32,000 kg, empty load weight: 13,950 kg, maximum load weight: 18,050 kg, tire size: 315/80R22.5, axle configuration: 8x4, number of seats: 2, first registration: 01/2021, next inspection (TÜV): 01/2026, emission class: euro6, brakes: engine braking, suspension: steel, loading space volume: 9 m³, driver cabin: day cab, wheelbase: 4,250 mm, Equipment: ABS, additional headlights, air conditioning, cabin, central locking, cruise control, differential lock, navigation system, onboard computer, parking heater, power assisted steering, seat heater, traction control, Vehicle location: Bovenden, ClassicSpace, Mercedes PowerShift 3, rental car, 1x comfort seat, rear window, electric mirror, heated mirror, left electric window, right electric window, air conditioning, sun visor, navigation system, auxiliary heating, ABS (anti-lock braking system), traction control (ASR), power take-off, differential lock, leaf springs, aluminum fuel tank, underbody protection, roof hatch, green environmental sticker. Djln Ufsv D N Rhjukskl Wheelbase: 4250 mm. Body: Liebherr concrete mixer type HTM 905 9m³, 7.5t front axle, rear axle with 233 planetary gears, 13.4t, rear engine output, disc brakes on front and rear axles, start-stop function, rear view camera! ACCESSORIES INFORMATION WITHOUT GUARANTEE. Subject to changes, prior sale, and errors! - .

Condition: new, Year of construction: 2024, lifting height: 16,000 mm, fuel type: diesel, General information Field of application: Construction Weights Empty weight: 3.500 kg Functional Lifting capacity: 300 kg Working height: 1.800 cm Other information Max. horizontal reach: 1250 m Max swing of arm in degrees: 320 Max swing of platform in degrees: 90 Dkeln Ufueu Azxlsksl Rental currency: EUR Production country: IT Additional information Please contact Jan De Lepeleer for more information

Condition: ready for operation (used), Functionality: fully functional, power: 0.4 kW (0.54 HP), the machine can be inspected on site Djln Ufusv Du Rtekekl Sale without guarantee or warranty

Condition: ready for operation (used), Indramat MAC093A-0-PS-2-C/110-B-1/S001 Permanent magnet motor , serial no. according to photo , hole spacing of mounting holes: 116 x 116 mm mm, Ø drive shaft: 24 mm ,used, small traces of use, 100% functional Dslei D Im Den Ufukjkl

Year of construction: 1990, Condition: good (used), hydraulic surface grinding machine with automatic vertical infeed max. grinding length 670 mm Max. grinding width grinding width 280 mm Max. grinding height grinding height 400 mm Table speed , longitudinal 2 - 35 m/min. Table speed , crosswise 0,3 - 40 mm/stroke Rapid traverse yes grinding wheel dimensions 300 / 76 x 40 mm Drive power 4 kW Machine dimensions L x W x H 2000 x 1850 x 2000 mm Machine weight 2300 kg Hydraulic and electrical system dimensions L x W x H 1200 x 800 x 2000 mm Hydraulic and electrical system weight 650 kg Dolnjf Um Rao Ufukjkl Accessories / special features: - Permanent magnetic clamping plate 630 x 200 mm - Automatic vertical infeed with digital display - Manual pull-off device - Coolant system - Separate hydraulic unit - Grinding wheel - Machine alignment elements Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 D - 44143 Dortmund - Wambel

Condition: reconditioned (used), Year of construction: 1974, Universal lead and spindle lathe Make: WEILER Deln Usmgaddjfukskl Model: Commodor Year of manufacture: 1974 - overhauled newly painted RAL 7035 light gray Mach. no.: 0068 Center height: 180 mm Center width: 1000 mm Spindle bore: 56 mm with guarantee geometric acceptance with test report Accessories: - 3-axis digital display FAGOR Innova 30i-T new - Chuck protection hood with electrical protection - Quick-change tool holder size B - simple bed stop - Coolant device - Operating instructions - used, as seen -

Condition: new, Functionality: fully functional, FESTO DGPL-32-700-PPV-A-KF-B; 161793 Linear actuator. Doln Ufueturw Nskjkl Good working condition. Please check out our other listings as well.

Condition: ready for operation (used), Year of construction: 2000, Materials: paper/cardboard/solid board/corrugated board, min. paper weight: 80g/m², max. cardboard and solid board weight: 2000g/m², max. corrugated board thickness: 4mm, stack height at feeder/outfeed: 1700mm/1800mm. Punching force: 400t, min. sheet size: 350mm/400mm, max. sheet size: 820mm/1130mm, machine speed: 9000 sheets/h. Documentation available. On-site inspection is possible. Expected to be available from August 2025. Dkolnov D I Dyo Ufuksl

Year of construction: 1977, Condition: excellent (used), machine/vehicle number: H77-506, 255 / 5.000 Übersetzungsergebnisse Straightening force: 63 t Projection: 280 mm Table size: 500 x 600 mm Installation height: without straightening bridge 600 mm Max Stroke: 160mm Ram speed up: 117 mm/s m/min Dkeln Ufuoh S H N Hokel Ram speed down: 42 mm/s m/min Required space: 1600 x 700 x 2400 mm Weight: 3900kg

Condition: ready for operation (used), Indramat MAC112B-0-GD-2-C/130-B-0/S005 permanent magnet three-phase servo motor , serial no. according to photo , hole spacing of mounting holes: 152 x 152 mm, Ø drive shaft: 32 mm ,used, minor signs of wear, 100% functional ATTENTION: Please inquire charges for packing and transport separately! ATTENTION: Please enquire for charges for packing and transport separately! Deln Uji D Ipxofukskl

Condition: good (used), Year of construction: 2008, Nakamura Super NTJ -B Y-axis +/- 45 mm and B -axis +/-91 ° turret top. fully servo-controlled 0.001° with additional 1° serration and disk brake Milling drive top and bottom Bar passage D 65 mm spindle left, 51 mm spindle right Drive power 18.5 / 15 KW left/ 15711 KW right Fanuc 18 iTB control system Spiral interpolation Air outlet left 10.4 "" screen 12-position turret for driven tools 24-position turret for turning tools (double holder technology) IRCO interface Collision check NT Nurse NC - Kit Speed correction switch for both spindles Work area light Automatic central lubrication for all axes mobile coolant tank door interlock transformer CE chip conveyor Coolant and air discharge through the right spindle 5 pairs of free M functions Finished part gripper G Djln Uovhcryofukjkl L = 150 mm D 65 mm Parts collecting tray A for material remnants Polygon function intilligent hand wheel Clamping top GR 65 Modular A6 3 jaw chucks right available immediately Automatic hours 29187 h

Condition: reconditioned (used), Year of construction: 1990, Universal lead and feed spindle lathe Make: WEILER Model: Praktikum 160 B Year of manufacture: 1990 - overhauled newly painted RAL 7035 light gray Mach. no.: 90-160-2054 Center height: 160 mm Center width: 650 mm geometric acceptance with test report Accessories: - 3-axis digital display FAGOR Innova 30i T - covered lead and feed spindle - braked drive motor - coolant system - electrically secured chuck protection hood - quick-change tool holder size A Deln Ufehy Tdysukskl - simple bed stop - chip back wall - operating instructions with guarantee used as seen The machine is technically corresponding to the state of the year it was built.

Year of construction: 2015, operating hours: 715 h, Condition: good (used), KÄRCHER B 150 R with R-head (roller brush scrub deck) Ride-on scrubber dryer Deln Ufusivt Hbokekl This KÄRCHER B150R is year of manufacture 2015, has only 715 total operating hours uand is in good overall condition with the usual signs of use and wear, vglb. NP 19.000,-€! The price is exclusive of 19% VAT! - Viewing / test drive gladly possible - Shipping can be organized nationwide, the cost depends on the distance!

Condition: used, Year of construction: 1979, Functionality: fully functional, Grinding wheel diameter: 600 mm Center width: 300 mm Djljrvybten Ufukskl Center height: 180 mm Headstock Counter holder with pressure cylinder

Year of construction: 2010, Condition: good (used), machine/vehicle number: 182245, table mounting size: 500 x 1050 mm movements x/y/z: ca. 800/500/500 mm spindle taper: BT 40 ISA min./max. distance table/spindle: 100/650 mm spindle turning speed range: 8000 rpm number of tool positions: 24 pieces carriages: 5 - 6000 mm/min rapid move: ca. 15 m/min Dkolnsdbh Udj Ufukel spindle drive: 11/15 kW electrical connection: 400 V, ca. 20 kVA kW space needed: 2450 x 2220 x 2780 mm weight: 5200 kg Delivery time: approx. middle April 2017

Condition: ready for operation (used), Indramat MAC115D-0-DS-2-F/180-B-0// Permanent magnet three-phase servo motor , used, overhauled by the manufacturer in 2010 and not used since then, 100% functional ATTENTION: Please inquire for charges for packing and transport separately! ATTENTION: Please inquire for charges for packing and transport separately! Dkslnoi D Irlj Ufukol

Condition: reconditioned (used), Year of construction: 1989, Universal lead and spindle lathe Make: WEILER Model: Condor B Year of manufacture: 1989 - overhauled newly painted RAL 7035 light gray Mach. No.: 1401 with guarantee Accessories: - 3-A digital display FAGOR Innova 30i T, new - Chuck protection hood with electrical fuse, new Dkjln Ufeg R S Rcsuksl - Quick-change tool holder base body size B - Bed stop - Coolant device - Chip back wall - Operating instructions -used, as seen -

Year of construction: 1990, Condition: used, edge heights: 10 - 60 mm edge band material thickness: 0,4 - 25 mm electr. connection: 380 V, approx. 9,9 kW Dksle T T Ddjn Ufukol space needed: 2900 x 870 x 1320 mm weight: 780 kg

Year of construction: 1956, Condition: used, machine/vehicle number: 6255, drilling capacity steel/GG: 23 mm spindle taper: 2 MK arm length: 300 mm Dkjln Ufebn Ak Ueukel table size: 300 x 300 mm spindle sleeve stroke: 100 mm spindle turning speed range: 190 - 1500 rpm engine: 380 V, 0,5/0,75 kW space needed: 410 x 670 x 1950 mm weight: 180 kg

Year of construction: 1985, Condition: excellent (used), machine/vehicle number: 2476, for spindle taper: MK 4 Dkoln Ufod R Em Ieukel Max. Input speed: 1500 rpm Diameter up to: 10.2 mm Shank Diameter for quill: Construction height: 500 mm Weight:

Condition: used, machine/vehicle number: 948587884, Working width of the brush head: 65 cm Number of disc brushes: 2 Suction width of the squeegee: 95 cm Driving speed forward/backward up to max.: 5,5/2,5 km/h Turning circle-Ø outside: 1,9 m Unladen weight: 254 kg Total weight incl. 74 l cleaning solution: 378 kg Space requirement: Length with brush head and suction: 146 cm Width without/with suction: 68/95 cm Height: 103 cm Dkoln Ufjc Uvfveuksl Tank capacity for fresh water approx.: 72 l Tank capacity for waste water approx.: 78 l

Year of construction: 1991, Condition: ready for operation (used), Primary voltage: 3 x 400 V, +/- 5% Primary current: 2.4 A Djlned Atqce Ufukskl Secondary voltage: 3 x 19.5 V Secondary current: 44 A Duty cycle: 100% Space requirement: 230 x 150 x 220 mm Weight: 20 kg