Used Tos Fgs 63 B for sale (24,203)

Condition: used, Gear servo motor 0.28kw INDRAMAT 092B-0-QD-1-B/095-B-07-I01000 Manufacturer: INDRAMAT GmbH Type: 092B-0-QD-1-B/095-B-07-I01000 Power: 0.28kw Voltage: 11.9 A Revolution: 4000/min IP65 Djlijud Nu Usntm Necg Weight: 65kg

Condition: excellent (used), Year of construction: 2016, operating hours: 800 h, Functionality: fully functional, working width: 750 mm, area performance: 3,300 m²/h, overall weight: 460 kg, warranty duration: 12 months, tank capacity: 90 l, KARCHER B 90 R D75 SCRUBBERS NEW 6V 175Ah GEL BATTERIES (SIAP) (4x) 2016 production year Machine mileage is 800 hours 750mm cleaning head (TB750) equipped with two new medium-hardness disc brushes, allowing work on any surface. New natural rubber astringents. Built-in battery charger for easy daily use New protective rubbers around the brush head prevent water from splashing outside the machine's outline The device is equipped with a new, durable drain hose The new suction turbine ensures high water suction power from the squeegee Each device we offer has individually taken photos, you buy exactly the machine you see TECHNICAL DATA: Power supply voltage: 24 V Working width of brushes (mm): 750 Suction width (mm): 940 Practical efficiency (m²/h): 3300 Dcjlintsuhy Uaom Nog Tank capacity clean/dirty water (l): 90/90 Number of brushes (pcs): 2 Total weight, ready for work (kg): 460 DIMENSIONS: Length with squeegee (mm) 1450 Height (mm) 1200 Width with squeegee (mm) 940 Width without squeegee (mm) 800 INCLUDED: NEW 6V 175Ah SIAP GEL BATTERIES (x4) NEW 380mm PPL 0.5 disc brushes (x2) Built-in battery charger Suction bar + natural rubber rubbers Tenzi Normal 5L liquid - FREE KEY FEATURES: 90-litre tank allows you to pour a large amount of cleaning solution, so you don't have to stop working often to refill it Thanks to its design, the machine is very manoeuvrable. A small turning radius allows you to work in narrow passages and alleys. The parabolic squeegee beam ensures precise suction of the solution from the cleaned surface The ergonomically designed cockpit and the centrally located operator's seat provide good visibility of the cleaned surface The large working width (750 mm) ensures high surface efficiency A very legible and intuitive control panel.

Year of construction: 1989, Condition: used, Manufacturer: Hönnema Model: KAT 63/1250 Year of manufacture: 1989 General / technical data: Djlinslu D Hketm Nscg CNC grooving machine with partial or rotary table for twist grooving. Max. stroke: 1250mm Cutting speed: stepless from 0 to 16m/min Max. Return speed: 16m/min Max. Groove width: 63mm Fully automatic twist dividing attachment: RA 450 AUDR Remark: The feed is made by stepping motor and ball screw through the machine table. The machine table has a stable and smooth-running linear guide. The machine is approx. 1.500mm under floor! The machine is under power in our warehouse and can be inspected.

Condition: excellent (used), Functionality: fully functional, power: 169 kW (229.78 HP), fuel type: diesel, color: yellow, overall weight: 20,000 kg, tire size: 23.5R25, axle configuration: 4x4, shovel volume: 3.2 m³, Year of construction: 2007, operating hours: 15,188 h, fuel: diesel, Equipment: additional headlights, air conditioning, all wheel drive, cabin, standard shovel, Manufacturer: New Holland Type: W 190 B Year of manufacture: 2007 Hours: 15.188 Engine: CNH 667TA-EBD kW / PS: 169 / 230 Tires: 23.5 R 25 Bucket: Standard with cutting edge Capacity: 3,2m³ Accessories: A/C Dolintjq Hd E Ajm Nocg Central lubrication system Pfreundt scales Seka protective ventilation Rear view camera Machine ready for immediate use. Subject to errors and prior sale.

Condition: excellent (used), Year of construction: 2009, operating hours: 33,474 h, Functionality: fully functional, load capacity: 60 kg, arm reach: 1,960 mm, Used IRB4440/60 industrial robot. IRB 4400 is an extremely fast, compact robot for medium to heavy handling. The load capacity at very high speeds usually permits handling of two parts at a time. Year: 2011 (We also have 2008, 2009 options available) Cabinet: IRC5 Teach Pendant: NOT included but we can try to find one for you Signalling & Power Cables: Included Gripper: NOT included Please contact us for a quote and also the refurbishment options Main Applications: - Cutting/Deburring - Die Spraying - Dispensing Delsqzwyyeintm Necg - Grinding/Polishing - Measuring As PLC Merkezi EOOD, we have more than 300 robots in our inventory and deal with the brand of KUKA, ABB, FANUC and Motoman. (Source: ABB's Website)

Condition: excellent (used), Year of construction: 2014, Biesse ROVER B FT 2231 G machining center with unloading Manufacturer : BIESSE Model : ROVER B FT 2231 G Year of manufacture : 2014r Unloading table - belt. The Biesse ROVER B FT 2231 G is ideal for manufacturers of furniture, doors, home furnishings and other products requiring precision processing of board materials. With the ability to perform nesting operations, the machine allows efficient use of material, reducing waste and increasing production profitability. Technical data: - Flat Table (FT): Ideal for nesting operations, it allows optimum use of material and minimization of waste. - X working area 3,200 mm - Working area Y 2,205 mm - Z working area 120 mm - Tool magazine spaces 14 - BIESSE BH 660 control - Software BIESSE B_NEST - Independent Z axes 2 Delisu U Ratjntm Nocg - Number of milling spindles 1 - Number of revolutions max. 24,000 /min - Tool holder HSK-F63 - Electro-spindle 13.2 kW

Condition: used, Gear servo motor Indramat MACO92B-0-QD-4-C/095-B-0/WI518LV 4000 rpm Manufacturer: Indramat Type: MACO92B-0-QD-4-C/095-B-0/WI518LV Dslintmoud Nt De Njcg Revolution: 4000/min IP65 Weight: 50kg

Condition: used, Memmert B 60 Drying oven Dcelinethcyfjtm Nsg Heating oven up to 70°C

Year of construction: 2007, Condition: like new (used), Functionality: fully functional, Special opportunity! Dcslinowcznbotm Njg From the state of Thuringia's inventory, we can offer you these top-of-the-line heating cabinets, Type B 6200, from the global brand "Thermo" / "Heraeus," in like-new condition. The B 6200 is one of the most reliable devices on the market and is now an indispensable part of virtually every laboratory worldwide. It is not only distinguished by its high precision, but is also considered by experts to be one of the most durable and robust devices. Both devices were purchased new by the state of Thuringia in 2007 and have been used exclusively for annual inspections since then. They are in immaculate condition, both visually and technically - see pictures. The features of both devices are particularly noteworthy, going far beyond the standard version - both B 6200s feature additional circuit breakers, a timer, and a microprocessor-controlled temperature controller. The price refers to one heating cabinet with the described features and shelf as shown. Technical specifications: Thermo/Heraeus B 6200 oven Manufacturer: Thermo/Heraeus, Made in Germany. Interior volume: 196 l. Temperature range up to 70°C. Fresh and exhaust air inlets. Dimensions of outer casing (W x H x D): 895 x 816 x 715 mm. Interior dimensions (W x H x D): 554 x 644 x 550 mm. Weight: approx. 90 kg. 230 V, 50 Hz, 2.6 A, 0.6 kW. Features: Temperature controller with digital display and microprocessor-controlled monitoring, over- and under-temperature protection. Time control with stainless steel inserts. Application: Microbiological incubation processes in pharmaceutical, medical, and microbiological laboratories. Hygiene testing in the pharmaceutical, food, and cosmetics industries, and other sectors, long-term storage tests, and much more. Sales are exclusively for commercial customers; you will, of course, receive an invoice with VAT shown. Private buyers have the option of purchasing the device "on behalf of a customer"; direct commercial sales to private individuals are expressly excluded! The goods are sold excluding any warranty or liability for material defects. This exclusion does not apply to claims for damages resulting from grossly negligent or intentional breach of the seller's obligations, nor to any injury to life, limb, or health. Shipment will be made within three business days after receipt of payment by freight forwarder. You can also pick up the device from us during regular business hours by appointment. The total weight of the system, including accessories and pallet, is approximately 110 kg. If you have any questions, please contact us directly using the contact details provided.

Condition: ready for operation (used), Idlers with rolls For Belt 1000 mm Rolls with size: 220 mm x 650 mm x 220 mm ∅ 89 mm Dcjlintmji A Arpj Neg Price €30 a Piece 560 pieces in Stock

Condition: used, operating hours: 6,900 h, O & K L 20.5 B Original color Tires approx. 50% Shovel KW 89 Year of manufacture 2001 etc... Dolintmswch N Eo Necg

Year of construction: 2001, Condition: like new (used), Parts shown by hand not come. Djlieg Rgtujntm Njcg

Condition: used, Year of construction: 2009, machine/vehicle number: A0908/7866, working width: 250 mm, KOCH SBD-B Saw-Mill-Drill - Pass-Through Machine The machine has the following functions - loading magazine - 2 units with a formatting saw diameter 400/30 mm - 4 milling units with oscillation 4KW 18,000 rpm adjustable pneumatic oscillation - 2 horizontal drilling supports head 7 spindles (2 in the 32 mm module, 5 in the 16 mm module) - 3 vertical drilling supports head 14 spindles (12 in the 32 mm module + 2 extreme angular in the 32 mm module - 3 horizontal drilling supports Y axis 2 heads 16 spindles (14 spindles in the 32 mm module + 2 angular in the 32 mm module + 1 head 8 spindle (7 in the 32 mm module + 1 middle angle 32 mm - Return belt to the operator - Supports for long elements The machine does not have doweling units Dimensions of processed elements L- 350-2500 Dcolintmowd Rlfo Nog W- 30-200 Gr- 15-75 Machine configured for processing table elements, sample elements in the attachment

Year of construction: 2012, Condition: good (used), Year of manufacture : 2012 Film width : 50mm Product size range min. mm 50 x 40 x 5 Dcelintoiqfkwom Njg Product size max width x height mm 330 x 160

Condition: used, Double-column hydraulic press SCHÖN Type UTE/B 50 Machine No. 5509, Year of manufacture 1971 Pressure capacity 50 tons Column width 550 mm Column side clearance 150 mm Dcjlinov Srfwjtm Neg Table surface 480 x 380 mm Table opening Ø 70 mm Ram surface 490 x 280 mm Clamping pin bore Ø 40 mm Max. ram stroke 150 mm Max. installation height 390 mm Table height above floor 890 mm Rapid forward speed approx. 130 mm/sec. Working speed approx. 20 mm/sec. Return speed approx. 130 mm/sec. Motor power: 4 kW Power supply: 380 volts, 50 Hz - Continuous press force adjustment - Rapid stroke and working stroke - Pressure- or stroke-dependent stroke limitation - Adjustable pressure hold time, press time extension 0.5-6 seconds - Mechanically adjustable fixed stop via handwheel on the ram - SICK light barrier, type LVU - Stroke counter - Double column guide on the ram Space requirement: L x W x H: 1100 mm x 1050 mm x 2320 mm Weight: approx. 1.5 tons Good condition

Condition: new, Aircraft AIRBAU 652/100 B PRO piston compressor Mobile compressor with combustion engine for up to 14 bar operating pressure for working environments without a power connection. TECHNICAL DATA Dimensions and weights Length (product) approx. 1050mm Width/depth (product) approx. 500mm Height (product) approx. 1060mm Weight (net) approx. 121kg Electrical data Drive engine1 cylinder / 4-stroke engine Power input6.6kW Dcjlinjt H N Nxjtm Neg Noise emission Sound power level Lw99dB(A) Explanation Sound power levelSound power level in accordance with DIN EN ISO 3744 (Directive 2000/14/EC) Compressor Compressor systemHOS Suction capacity approx.642l/min Filling capacity approx.480l/min Explanation Filling capacity at 6 bar working pressure Number of cylinders2 Number of compression stages2 Compressor speed950min¯¹ Compressed air tank Maximum pressure14bar Tank capacity100l EQUIPMENT Pressure control Filter pressure regulator Automatic pressure switch CONDOR Drive transmission V-belt Compressed air line material Flexible armored hose line Compressed air preparation Filter pressure regulator Compressed air tapping A quality quick coupling Compressed air tank Powder-coated Tank base Two wheels with PU foam tires, one rubber buffer

Condition: used, mileage: 86,480 km, power: 290 kW (394.29 HP), first registration: 05/2020, overall weight: 32,000 kg, fuel type: diesel, color: white, axle configuration: > 3 axles, next inspection (TÜV): 03/2026, gearing type: automatic, emission class: euro6, loading space volume: 9 m³, Year of construction: 2020, Equipment: ABS, air conditioning, electronic stability program (ESP), parking heater, * MB mixer from Germany * Liebherr HTM 905 with 500 L water tank * Wheelbase 4250 mm * Medium-length cab * Air conditioning * Heated seats * Electric Windows and Mirrors * Air-suspended driver's seat * Rear window in the cab Dcelintmewc E Rts Nog * Sun visor * Multifunction steering wheel * Rear differential lock * Leaf spring suspension * Disc brakes * Tires 315/80R22.5 60-90% * Rear axles with planetary gears * Night light switch * Residual heat utilization * Side sunblind * Construction site filter * ABS deactivatable * Tinted windshield * Off-road drive mode * 320L diesel tank * High-performance engine brakes * LED taillights * Hot water auxiliary heater * Aluminum compressed air tank * Daytime running lights * Air horn * MB Power Shift transmission * Actros 5 Multimedia Cockpit * Locking system with central locking * Reverse alarm * Production at the Wörth plant * and much more * !!! Errors, changes, and prior sale reserved!!!

Condition: good (used), Year of construction: 1998, Baujahr 1998 Spindelstunden 52’000h Stangendurchlass 40mm Fanuc Series 18i-T Späneförderer Toolsetter integriert Delotth Hgeintm Necg 12Stationen 1Spindel, X und Z Achse Kurzstangenlader Spannzangenfutter F48

Condition: good (used), Year of construction: 2017, WAGNER WMC 1100 B 5-axis CNC machining center, No. M11198, built in 2017, with clamping table, 30-station tool changer, chip conveyor, cooling system, SIEMENS Sinumerik 828D control system, weight approx. 8,000 kg. Dcoliowczltentm Nog

Year of construction: 2025, Condition: new, Functionality: fully functional, Tool cabinet for press brake Good for WILA / TRUMPF tools or Type B L / W / H: 1180 mm x W 850 mm / H 1600mm, 450kg -ausziehbare drawers, allows the double-sided access to the tools -beliebige height adjustment of shelves -robust steel construction, powder coated -Lateral fork guide rails for transporting by forklift (cavity under the cabinet) Dolijvnbyventm Nscg -The drawers run on Rollengleitschienen (serve as additional stabilization) -The cabinet can be dismantled - Number of drawers: 4 pieces - Dimensions of drawer: - Total height 1200mm / 850mm total width / total depth 1180mm - Dimensions of the compartments in a drawer: - Fachhhoehe adjusted to 210mm (is varriabel) - Trade Height total usable ohnen shelves 1450mm - Trade width 130mm available - Trade depth usable 1100mm - Number of shelves: 5 pieces / completely continuous

Condition: new, ELMAG SEB 15054WDE-IP54-AVR-DGUV-B-BGBAU power generator with HONDA GX690 engine, electric start and maintenance-free battery Version according to DGUV version 'B' and BGBAU BAU - Petrol - IP54 - 400/230 Volt - according to DGUV and BGBAU Maximum safety is particularly important on construction sites and in commercial use. safety is required. ELMAG power generators in the IP54 series fulfill the following requirements protection against contact and splash water, ELMAG power generators in the IP54 series also meet the highest equipment and safety requirements in accordance with DGUV version "B" and BGBAU for use without a qualified electrician. SEB 15054WDE-AVR-IP54-DGUV-B-BGBAU NEW! Flexible use thanks to extremely extensive standard equipment. Also ideal for circular construction saws. With exchangeable tank, carrying handles and crane eye as standard. Equipment - Connections: 230V: 3x Schuko 16 A and 3x LSFI 30mA, 400V: 1x CEE 16A-5p and 1x TMSS 4P Delinst H H Tzetm Nscg - Starter: electric start, battery - Shutdown: Iso-monitor, low oil, overload and short circuit - Synchronous generator - AVR control - Protection class IP 54 - Hour meter - Lifting lugs - Carrying handles ADVANTAGES Quality drive - original Honda four-stroke air-cooled gasoline engine IP54 protection class AVR control and increased unbalanced load capacity DGUV version: 30 mA RCD for each socket from the second socket onwards BGBAU version: Bender iso-monitor and additional 30 mA RCD for each socket outlet from the second socket outlet onwards TECHNICAL DATA Voltage - frequency 400 / 230/50 V/Hz Maximum power 3~400V 15 kVA Continuous power 3~400V 14.4 kVA Power 3~400V cont. 21 A Maximum power 1~230V 4 kVA Continuous power 1~230V 3.6 kVA Power 1~230V cont. 16 A Fuel type Petrol Speed 3000 rpm Cooling air-cooled Engine type Honda GX 690 Exhaust stage 5 Engine power 15 kW Displacement 688 cm³ Cylinder 2 Tank capacity 20 l Consumption at 75% load 5 l/h Running time per tank filling at 75% load 4 h Dimensions LxWxH 1020x550x600 mm Weight (without fuel) 170 kg Sound pressure level at 7m 75 dB(A)

Condition: used, mileage: 555,700 km, power: 290 kW (394.29 HP), first registration: 03/2003, overall weight: 32,000 kg, fuel type: diesel, color: white, axle configuration: > 3 axles, gearing type: mechanical, emission class: euro3, loading space volume: 9 m³, Year of construction: 2003, Equipment: ABS, * 3240 B Stetter 9 cbm * Telligent 16-speed gearshift with clutch pedal * Cruise control * Rear differential lock * Leaf spring suspension * 315/80R22.5 tires * 4200 mm wheelbase * 290 L diesel tank Dcjlintor I Spvom Nsg * Gearbox oil cooling * Cruise control * Electric windows and mirrors * Sun visor * Disc brakes on front and rear axles * Medium-length driver's cab * Rear window * and much more * !!! Errors, changes and prior sale reserved!!!

Year of construction: 2014, Condition: good (used), Baujahr 2014 Spindelstunden 41’617h Stangendurchlass 36mm Dcslistth Dwontm Njg Mitsubishi M700 Späneförderer LNS Toolsetter 2x12Stationen 2 Spindel, 2X, 2Y und 2Z-Achse Diverse angetriebene Werkzeughalter (Axial,Radial) Spannzangenfutter F48 Kühlmittelpumpe 8bar

Year of construction: 2025, Condition: new, Functionality: fully functional, Tool cabinet for press brake Good for WILA / TRUMPF tools or Type B L / W / H: 1180 mm x W 850 mm / H 1600mm, 450kg -ausziehbare drawers, allows the double-sided access to the tools -beliebige height adjustment of shelves -robust steel construction, powder coated -Lateral fork guide rails for transporting by forklift (cavity under the cabinet) -The drawers run on Rollengleitschienen (serve as additional stabilization) -The cabinet can be dismantled - Number of drawers: 4 pieces - Dimensions of drawer: - Total height 1200mm / 850mm total width / total depth 1180mm - Dimensions of the compartments in a drawer: Dcslintovnb Dbom Nog - Fachhhoehe adjusted to 210mm (is varriabel) - Trade Height total usable ohnen shelves 1450mm - Trade width 130mm available - Trade depth usable 1100mm - Number of shelves: 5 pieces / completely continuous

Condition: new, Optimum OPTIdrill B 17 PRO basic bench drill 3003161 With V-belt drive. TECHNICAL DATA Dimensions and weights Length (product) approx. 565mm Width/depth (product) approx. 275mm Height (product) approx. 840mm Weight (net) approx. 36.5kg Drilling capacity Drilling capacity steel (S235JR) 15.5mm Continuous drilling capacity steel (S235JR) 12mm Drilling table Drilling table work surface length 235mm Drilling table work surface width 220mm Drilling table type T-slot diagonal Drilling table T-slot size 12mm Distance spindle - drilling table max. 325mm Speed range Speed range 680 - 2700min¯¹ Number of speed ranges 5 Electrical data Supply voltage 230V Mains frequency 50Hz Machine base Distance spindle - machine base max. 530mm Machine base work surface length 170mm Machine foot working surface width 180mm Machine foot T-slot size 14mm Machine foot T-slots quantity 2 Machine foot T-slot distance 148mm Machine foot length 210mm Machine foot width 215mm Spindle Quill stroke 65mm Spindle holder MK 2 throat 152mm Motor(s) Spindle motor drive power 0.49kW SCOPE OF DELIVERY Dcjlintmst N Irws Nsg Quick-action drill chuck 1 - 15.5 mm Morse taper MK 2 (B 16) T-nuts