Used Tos Fgs 25 for sale (51,471)

Condition: used, Electric Forklift OM PIMESPO Type XE 25 ac Front Loader, Electric Forklift, Compact Forklift Serial No. SES23X9-10 - Fabric No. F14024W00609 Year of Manufacture 2008 Nominal Load Capacity 2500 kg Load Capacity at 500 mm Load Center 2500 kg Lift Height 4340 mm Overall Height 2220 mm (Container Capacity) Mast Height 2220 mm Free Lift 1600 mm Fork Length 1150 mm Fork Width 100 mm Fork Thickness 40 mm (38 mm - 35 mm at the bottom bend) Fork Carrier Width 1030 mm Csb Emy Ist Ac Ers Togt Operating Voltage 80 Volts - 4-Wheel Super Elastic, Solid Rubber - Tires Front 23x9-10 / Rear 18x7-8 - Hydraulic auxiliary steering - Triplex free-lift mast - Sideshift - Overhead guard - HAWKER drive battery, 80 volts, 560 AH, built in December 2022, delivered with automatic charger - 2,969 operating hours according to the hour meter - New TÜV and UVV inspection Length without forks: 2,400 mm Overall width: 1,190 mm Weight with battery: 4,800 kg Good condition

Condition: used, pressure 25 t stroke 500 mm throat 355 mm dayligth 800 mm table surface area 500 x 500 mm table height over floor 700 mm ram surface 250 x 250 mm power requirement 7,5 kW Weight 2,1 t dimensions of the machine ca. 1,45 x 0,9 x 2,55 mxmxm hole in the table 180 mm Cob Emy Iovzxq Sj Tegt permitted only for safe tools or fixed screen according to the German Safety Regulations (UVV) with oil-hydraulic drive as is where is, WITHOUT putting into operation, in given condition

Condition: excellent (used), Year of construction: 2014, Screw compressor KAESER SK25 SFC machine with inverter after service Technical data: capacity: 2.52 m3/min (2520/min); engine power; 15 KW; pressure: 8 bar mileage; 8299h year; 2014 net price 20500 gross price 25215 Cgjb Emyjvvk E Ro I Tjt The compressor is fully functional, we provide service.

Condition: used, mileage: 114,000 km, power: 353 kW (479.95 HP), first registration: 12/2011, overall weight: 32,000 kg, fuel type: diesel, brakes: retarder, gearing type: mechanical, emission class: euro5, Equipment: soot filter, - Retarder - Air conditioning - Spitzer cement silo 25-3 - Silo compressor, Suspension: Ceb Eswg N Iqomy I Tegt Leaf-air

Condition: excellent (used), Year of construction: 2006, machine/vehicle number: 085579, Alfa Laval LKH 25/190 11kW Up to 85,000 m3/h Csb Emyjwf I Sxj I Tegt Very good condition

Condition: used, Year of construction: 2022, Capacity: 300 kg/h Hopper width: 225 mm Main motor power: 22 kW Cjb Emy Iswc Tl Sj Tegt Screen: Yes Starch mixer: Yes

Condition: used, sheet width 1020 mm plate thickness 2,5 mm bending angle max. 135 ° stroke of upper beam 25 mm Cjb Emy Iowcg D Ij Tjgt weight of the machine ca. 285 kg dimensions of the machine ca. 1,35 x 0,85 x 1,20 m PRICE: 2.045,-- EUR - with an oblique segmented upper cheek - distribution segment: 25-30-35-40-45-50-75-100-150-200-270 - done with the foot brake application

Condition: used, Year of construction: 1962, pressure 025 t throat 200 mm stroke 8 - 80 mm no. of strokes 180 /min distance table/ram, max. stroke up, adjustment up 330 mm table surface area 550 x 400 mm hole in the table 60 mm table height over floor 800 mm passage to the back 200 mm ram surface 355 x 220 mm ram adjustment 50 mm power requirement 2,7 kW weight 2,5 t dimensions (WxDxH) 1,2 x 1,8 x 2,4 m Cgjb Emyevuudnj I Tjt permitted only for safe tools or fixed screen according to the German Safety Regulations (UVV) with motor, pneumatic clutch, mechanical overload protection in ram, manual stroke adjustment, manual ram adjustment, inclineable, manual central lubrication, two-hand and foot operation as is where is, WITHOUT putting into operation Price for commissioning (in given condition) on request

Condition: used, mileage: 708,100 km, power: 338 kW (459.55 HP), overall weight: 26,000 kg, fuel type: diesel, color: red, axle configuration: 6x4, maximum load weight: 8,900 kg, empty load weight: 17,100 kg, wheelbase: 4,800 mm, brakes: engine braking, driver cabin: sleeper cab, gearing type: mechanical, emission class: euro2, suspension: steel, loading space length: 5,500 mm, first registration: 02/2000, Equipment: ABS, air conditioning, crane, cruise control, differential lock, onboard computer, trailer coupling, Scania R144 460 V8 6X4 flatbed with heavy duty crane D.O.T.: 2/ 2000 708.100 KM Long cab Manual gearbox Air conditioning Trailer coupling 6X4 drive Leaf suspension Tires 385/65 R22.5 tread approx. 60% Tires 315/80 R22.5 tread approx. 60% Wheelbase 4800mm Flatbed 5500mm Csb Esvik Sksmy I Tegt Unladen weight 17,100 kg Crane Fassi F330/ F360XP Year of construction 1999 Radio remote control 4 point outriggers 8 extensions in total 4 hydr. extensions + 4 mechanical extensions 2.35m/ 12500Kg 4.40m/ 7055Kg 6.25m/ 4825Kg 8.15m/ 3600Kg 10.15m/ 2835Kg 12.25m/ 2330Kg 14.50m/ 1815Kg (mechanical extension) 16.75m/ 1440Kg (mechanical extension) 19.25m/ 1000Kg (mechanical extension) 21.75m/ 800Kg (mechanical extension) Hydraulic hook height approx. 16 meters Hook height with mechanical extensions approx. 25.50 meters Export/ net price: 33.900 Euro All information without guarantee, errors excepted.

Condition: good (used), Year of construction: 2007, operating hours: 17,709 h, lifting height: 4,550 mm, fuel type: diesel, mast type: duplex, gearing type: automatic, fork length: 250 mm, Year of manufacture: 2007 Cgeb Emyewbh Tbe I Tot Field of application: Internal logistics Lifting capacity: 25.000 kg Technical condition: good Visual appearance: good Please contact Pedro or Arie for more information Volvo engine

Condition: like new (used), Year of construction: 2013, Functionality: fully functional, Manifold GEA TUCHENHAGEN Cjbjwf Ingj Emy I Togt Mixproof valves - Flushing -Balanced Valve top type: TM15N2B0M/66 DN25 NL = 8x DN25 MERCURY = 3x DN 65 = 2x DN 80 = 27x Please contact us for more information

Condition: used, Year of construction: 2013, Serial number: WLASKS343CMF6xxxx Please contact ATS Norway AS for more information Please provide reference number upon request: 20055 Specifications: - 2013 model - Eu approvoed until 02.04.2026 - Sliding axles - 3 axles - Swing on 3 axles Cjb Emy Iev U Swfe Tegt - Lift on 1 axle - High lift tailgate - Tires (see pictures) - Ready for delivery Description: We have a 2013 Langendorf SKS-HS 25/33 3 axle Tipper semi for sale. The trailer will be EU approved before sale. Everything should work as it should according to the owner. Ready for delivery EU-approved until: 02.04.2026 Own weight: 10770 Total Weight: 43500 Payload: 32730 Width: 255 Length: 1125

Condition: used, Storage location: Nattheim Cgjb Esvvi E Nemy I Tst

Condition: used, Year of construction: 1994, pressure 250 t distance between columns 1650 / 1400 mm stroke fix 150 mm no. of strokes 30 - 75 Hub/min dayligth (stroke and adjustment up) 665 mm column travel -side 550 mm table surface area 1600 x 900 mm hole in the table 1000 x 300 mm table height over floor 980 mm Csb Emevuucwjy I Tjgt ram surface 1400 x 900 mm power requirement 42,0 kW weight of the machine ca. 33,00 t required space 2,8 x 2,5 x 4,4 m permitted for automatic mode according to the German Safety Regulations (UVV) with infinitely variable drive, pneumatic clutch/brake combination (Ortlinghaus), hydraulic overload protection in ram, pneumatic counterbalance in ram, FIX stroke, motoric ram adjustment, motoric centralized lubrication Werkzeugwechselsystem elektronischem Walzenvorschub (Normatic, AESL 500-2,8) electronic roll feed (Normatic, AESL 500-2,8) with motor (Indramat), motorised adjustable material guide, motorised height adjustment tool changing system distance table - ram without tool changing system approx. 765 mm can be offered without putting into operation or alternatively with new control Siemens S 7-1500 F

Condition: used, mileage: 708,100 km, power: 338 kW (459.55 HP), first registration: 02/2000, overall weight: 26,000 kg, fuel type: diesel, color: red, axle configuration: 6x4, maximum load weight: 8,900 kg, empty load weight: 17,100 kg, wheelbase: 4,800 mm, brakes: engine braking, driver cabin: sleeper cab, gearing type: mechanical, emission class: euro2, suspension: steel, loading space length: 5,500 mm, Equipment: ABS, air conditioning, crane, cruise control, differential lock, onboard computer, trailer coupling, Scania R144 460 V8 6X4 flatbed with heavy duty crane D.O.T.: 2/ 2000 708.100 KM Long cab Manual gearbox Air conditioning Trailer coupling 6X4 drive Leaf suspension Tires 385/65 R22.5 tread approx. 60% Tires 315/80 R22.5 tread approx. 60% Wheelbase 4800mm Flatbed 5500mm Unladen weight 17,100 kg Crane Fassi F330/ F360XP Year of construction 1999 Radio remote control 4 point outriggers 8 extensions in total 4 hydr. extensions + 4 mechanical extensions 2.35m/ 12500Kg 4.40m/ 7055Kg 6.25m/ 4825Kg 8.15m/ 3600Kg 10.15m/ 2835Kg 12.25m/ 2330Kg 14.50m/ 1815Kg (mechanical extension) 16.75m/ 1440Kg (mechanical extension) 19.25m/ 1000Kg (mechanical extension) Cgobevik Sqj Emy I Tet 21.75m/ 800Kg (mechanical extension) Hydraulic hook height approx. 16 meters Hook height with mechanical extensions approx. 25.50 meters Export/ net price: 33.900 Euro All information without guarantee, errors excepted.

Condition: used, Year of construction: 2023, operating hours: 103 h, load capacity: 2,500 kg, lifting height: 6,100 mm, free lift: 2,140 mm, mast type: triplex, power: 17 kW (23.11 HP), fork carriage width: 1,150 mm, ground clearance: 90 mm, front tire type: Trelleborg, front tire size: 23x9-10, rear tire type: Trelleborg, rear tire size: 18x7-8, total length: 3,620 mm, wheelbase: 1,700 mm, drive type: Elektro, construction width: 1,300 mm, net weight: 3,399 kg, Electric forklift Still RX 60-25 Drive Electric Year built 2023 Lifting height (mm) 6,100 Cob Emyevfhgqj I Tjgt Lifting weight (kg) 2,500

Condition: used, Year of construction: 2008, operating hours: 5,834 h, 2008 | Delmag | Delmag SR 25 BT / RH 18 on Sennebogen SR25 with ABI MDBA 3500 Soil Improvement Rig | Used Drill | 5834 hours 📍Location: Germany, Uelzen 🚛 We Deliver to your destination – Estimate the shipping cost with our calculator! 💰 Buy Now for EUR 220000 or Make an Offer. Request payment at delivery for an affordable fee! (subject to approval)* 👷‍♂️ Inspected by an independent expert 65 inspection points 65 approved ✅ 0 imperfect ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: The machine is used for concrete pile drilling, soil improvement, and vibration tamping. The carrier vehicle is a Sennebogen SR25BT (built in 2008) with a Delmag RH18 drilling attachment (built in 2009). The drill table lift is 12.50m, total height is 19.91m. The outreach is 3.165 - 4.00m. It includes a winch for the feed with freewheel, auxiliary winch, and rear platform. The drill table is an SHT25, and the KDK rotary drilling head BT180-2 is not included. The machine is purely a soil improvement device, equipped with a MBDA 3500 ABI drill gearbox. It has a single auger. No Kelly bar is included. It features mast support cylinders and alignment automation. The hydraulic telescopic undercarriage has a width that adjusts from 3.0m to 4.40m. The CAT C9 engine was overhauled by CAT in 2015 at 3,304 operating hours. Drills and drill accessories are available separately. Also available is a mobile mixing plant, manufactured by MAT, which includes a mixing container (throughput capacity of 20m3/h), a conveyor screw, a mixing container (capacity 4,000l), and a plunger pump with remote control. The machine’s condition corresponds to its operating hours. During the inspection in 2023, the machine was running and functioning without any issues. As of October 2024, wear and tear have occurred on the valves, controls, and hydraulic hoses. It is not possible to operate the machine with two attachments simultaneously. The machine shows wear on bolts, bushings, and general usage marks (dents, scratches, etc.) consistent with its age, operating hours, and usage. The machine was not tested under load. It has been used with 55 and 80 paddles. After service and maintenance of the wear and tear, the machine will be ready for operation. ❓Want the Full Inspection Report, Extra Photos & a Video? 🔍 Search this on Google for full details!: "33244 Equippo" 💡 Why Buy from Us? ✔ Fully inspected machines ✔ Delivered to your jobsite Cobswb U Urs Emy I Tjgt ✔ Money-Back Guaranteed ✔ Safe payment methods with possibility to pay at delivery ❓Got machines to sell? Contact us for a free evaluation

Condition: used, Year of construction: 1997, Field of application: Internal logistics Serial number: 0xxxx Please contact ATS Norway AS for more information Please provide reference number upon request: 20076 Specifications: - 1997 model - 4288 hours - Hydraulic side shift on forks - Gas - Diesel - Lifting height of 3760 mm - Lifting capacity of 2350 kg - Lights - Air conditioning - Ready for delivery Description: We have a 997 Clark cgp 25 Truck for sale. Cgeb Emev U Sinoy I Tot The truck runs on gas and diesel. Faults and defects may be found. Ready for delivery.

Condition: used, Storage location: Nattheim Ceb Eevvi Hajmy I Tjgt

Condition: used, Year of construction: 1988, pressure 25 t stroke 1000 mm Csb Emy Ievuub Hs Togt throat 400 mm dayligth 1100 mm table surface area 620 x 620 mm table height over floor 650 mm ram surface 110 mm feed down 300 mm/s feed up 500 mm/s working feed 14 - 85 mm/s oil volume 400 l power requirement 6,0 kW Weight 3,8 t dimensions of the machine ca. 1,5 x 2,1 x 3,9 mxmxm hole in the table 80 mm permitted for manual loading according to the German Safety Regulations (UVV) with oil-hydraulic drive, controllable dependent on pressure/time and way, delicate foot-pedal control

Condition: excellent (used), Year of construction: 2008, Functionality: fully functional, machine/vehicle number: 00615, overall weight: 1,760 kg, input frequency: 50 Hz, type of input current: AC, input voltage: 400 V, pressure: 6 bar, year of last overhaul: 2024, Glass grinding and polishing machine with 5 wheels. In normal, working condition. Csboh Nq U Eo Emy I Tegt 5 Wheels Working angle 0-60° Thickness 4 - 22 mm Min. dimensions 80x80 mm Speed 0,4 m/min. Power supply: 400V

Condition: new, shuttle feeder AS 25 / R (right) for Buhrs BB 300-10K Cgsb Emyjd Strye I Tot other Buhrs BB 300 systems needs extra adapter plug new feeder in colour RAL 7035

Condition: used, Functionality: fully functional, Year of construction: 2017, operating hours: 8,927 h, load capacity: 2,500 kg, lifting height: 4,680 mm, free lift: 1,394 mm, fuel type: electric, mast type: triplex, construction height: 2,174 mm, fork carriage width: 1,150 mm, fork length: 1,200 mm, drive type: Elektro, Electric 4-Wheel Forklift Cgjb Ejwgf Rhemy I Tst Load Center: 500 ISO Class: ISO Class 2 = 1,000 - 2,500 kg Mast Type: Triplex Transmission: Double Pedal Condition: Reconditioned without warranty Technical Condition: Good Front Tire Type: Non-Marking Front Tire Size: 23x9-10 Front Tire Condition: 60 - 80% Rear Tire Type: Non-Marking Rear Tire Size: 200-50-10 Rear Tire Condition: 60 - 80% Battery Voltage: 80V Battery Ah: 625Ah Battery Manufacturer: Hawker Battery Type: PzS Battery Year of Manufacture: 2019 Battery Condition: 60 - 80% Description: Delivered with a new FEM 4.004 inspection including inspection book. Please call us for any further questions. In addition to this model, we have approximately 150 other industrial trucks in stock. Visit our website fleischmann-foerdertechnik. We are happy to inquire about leasing and financing, as well as delivery at favorable conditions. Part-exchange of Linde equipment is also possible – even without purchasing a unit from us. Reported operating hours were read as of the date of listing. Subject to prior sale, changes, and errors. Sideshift, fork positioner, Durwen fork clamp with valve block sideshift 3rd valve, 4th valve, rear work light, front work light, full free lift, safety light, LED,

Condition: used, power: 96 kW (130.52 HP), fuel type: diesel, gearing type: mechanical, emission class: euro6, color: white, Year of construction: 2025, Equipment: air conditioning, PRIVATE NEGOTIATION Offer valid for contracts and registrations by 05/31/2025 subject to approval by Mercedes - Benz Financial Services. - We accept trade-ins of any vehicle subject to appraisal. - Possibility of financing or leasing for any amount based on the customer's needs. We are EXPERTS in remote negotiations offering you the best solution to be able to buy our vehicles even if you live very far from the Province of Bergamo. We invite you to verify the characteristics of the vehicle published. Lodotruck s.r.l. declines all responsibility for any involuntary inconsistencies with respect to the description in the ad. If you are interested in the vehicle, in response to the ad indicate: city and telephone number. Cgsb Emysvy Ncpo I Tjt In case of trade-in, indicate: make, model, color, month and year of registration, kilometers, main accessories, transmission, KW / CV and condition of the vehicle (better if with attached photos). With this information we will be able to respond to you more quickly CUSTOMER SERVICE OPENING HOURS: Monday to Friday 8.30 - 12.30 / 14.00-18.30 Saturday: 08.30 - 12.30 Contact us at

Condition: used, Year of construction: 2000, pressure 25 t stroke 150 mm throat 420 mm dayligth 450 mm table surface area 700 x 820 mm Ceb Emy Ijvut N Ns Tsgt table height over floor 850 mm ram surface 600 x 600 mm feed down 370 mm/s feed up 370 mm/s working feed 18 - 33 mm/s oil volume 300 l power requirement 5,5 kW Weight 5,8 t dimensions of the machine ca. 1,1 x 2,0 x 2,4 mxmxm permitted for manual loading according to the CE-norm with oil-hydraulic drive, controllable dependent on pressure/time and way, cutting impact cushioning, mechanical depth stop, two-hand operation