Used Tos Fgs 25 for sale (51,473)

Condition: excellent (used), Year of construction: 2015, WHQ 105 CNC year 2015, 11800 spindle hours, Cgjlq Her Hdqxs Tcqet Travel distance X-axis: 1,800mm Travel distance Y axis: 1,600mm Travel distance Z-axis: 1,250mm CNC Sinumerik 840D, Table load: 5,000kg Spindle diameter: 105mm Spindle speed (max.): 3,300 rpm Table length: 1,400mm Table width: 1,600mm Travel distance W-axis: 630mm Automatic Tool Changer.....40 pos Coolant through spindle.....40 bar Splash guard around table Chip Conveyor Oil cooling unit (chiller) Touch probe Renishaw RMP60 Upgrades in 2024 and 205 Retrofit of X and Z axis ball screws at producer – KSK Kuřim CZ New linear scales Heidenhain in X and Z axis including cabling retrofit of Z axis - new Biplast V lining, hand scraped Biplast lining on Z axis Retrofit and new parts for tool clamping and automatic tool changer arm Overhaul of Z and Y axis feed motors at authorized Siemens service (new bearings and sensor) New Siemens hand wheel Machine can be tested in our showroom under power. Actual protocol of geometric accuracy can be provided on request. Tolerances in geometric protocol will be guaranteed after installation and geometry setting.

Condition: as good as new (ex-display), Year of construction: 2024, Functionality: fully functional, Demonstration machine BUB 50 CNC 3000 Center height: 500 mm Center width: 3000 mm 1 grinding wheel: 500/380 x 100 x 203 mm Colq H Tov N D Hbecqsgt

Condition: good (used), fixed bezel Make TOS SPH 340 mm Through 160 mm Cgeljdx D T Ajq H Tcqot Roller diameter 30 mm Foot width 310 mm Mid Prism Middle fastening bore 125 mm

Condition: used, Year of construction: 1987, Technical details: table diameter: 500 mm table height: 70 mm rotatability of the table - manual/mechanic: ja ° weight of the machine approx.: 300 kg space requirements of the machine approx.: 0,92x0,650x0,19 m T-slots are 3 pcs longtitudinal and 1x transverse in the middle existing a=18mm Cslsu Nkm Eeq H Tcqogt h=30mm b=30mm c=13mm *

Condition: good (used), Year of construction: 1990, LZ-Lathe Fabr.TOS Type:SUI 63 Bj.1990 2 axes digital readout Heidenhain Cgolqouadfto H Tcqet Chuck diameter 400 mm Forkardt Tool holder Multifix size E Spindle speed : 11 -1800 rpm Motor: 15 KW Spindle bore : 72 mm Turning diameter overbed : 650 mm Turning diameter over-bed : 340 mm Turning length : 2000mm Space requirement : length 4200 mm width 1800 mm height 1700 mm weight approx. 5500 kg Machine can be demonstrated ready for use under current.

Condition: used, height of centers: 250 mm center distance: 1500 mm Cgolq Houritbj Tcqst max. circulation-Ø over bed: über Bett 500 mm spindle boring: 56 mm spindle retainer: Gr. 8 retainer taper tailstock: 6 MK spindle speed: 11,2 - 1400 rpm forwarding feed: längs/plan 0,027-3,8/0,013-1,9 mm/U thread pitch: 0,5 - 36 mm electrical connection: 380 V, 2 x 5,5 kW space needed: 3600 x 1250 x 1300/1600 mm weight: 3000 kg

Condition: reconditioned (used), Year of construction: 1986, Functionality: fully functional, machine/vehicle number: 12473, travel distance X-axis: 2,995 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 795 mm, spindle speed (max.): 2,000 rpm, No reserve price - guaranteed sale to the highest bidder! TECHNICAL DETAILS X-axis travel: 2,995 mm Y-axis travel: 800 mm Z-axis travel: 795 mm Table size: 2,995 × 800 mm Number of T-slots: 5 Coolant tank: 300 L Spindle Tool holder: SK50 Spindle speed: max. 2,000 rpm Feed Max. feed rate: 5,000 mm/min Max. rapid traverse: 6,000 mm/min Colq H Tcev R Dxmjqogt MACHINE DETAILS Installation dimensions: 8,000 × 3,500 × 3,000 mm EQUIPMENT - CNC control retrofitted by NCT - Horizontal and vertical machining possible

Condition: refurbished (used), Functionality: fully functional, Tos Zebrak FN-32 Milling machine. Refurbished, fully functional. Total machine input: 3 kW Longitudinal movement of the table - x-axis: 600 mm Transverse movement of the table - z axis: 400 mm Vertical table movement - y axis: 400 mm Spindle taper: ISO 40 Spindle speed: 40-2000 rpm Working longitudinal feed - x-axis: 8-400 mm/min Working transverse feed - axis z: 8-400 mm/min Working vertical feed - y-axis: 8-400 mm/min Fast x/z/y: 2000/2000/1000 mm/min Cgslq Hev Rr Hlj Tcqst Good working condition. Please check out our other listings as well.

Condition: good (used), Year of construction: 1999, operating hours: 2,500 h, cutting height (max.): 160 mm, TOS SVITAVY Pwr 401 multi-saw, engine 55kW, cutting width 400mm, cutting height 160mm Cgolov N Rv Nsq H Tcqjt

Condition: used, Technical details: Celqju Nkrbo H Tcqegt clamping surface area: 630x400 mm no. of flutes: 8 rotatability of the table - manual/mechanic: 360 v. Hand ° weight of the machine approx.: 175 kg Angular table - machine table- machine clamping table for milling machine TOS such as FNG or FNGJ The frame is swiveable via hand wheel 360° (scale 360°) T-slots according to DIN 650 and 508 a=14mm; h=24mm; b=25mm; c=9mm foot plate: size 380x300mm with 6 clamping slots WxL=14x20mm *

Condition: ready for operation (used), Functionality: fully functional, cutting height (max.): 250 mm, overall weight: 7,500 kg, saw blade diameter: 400 mm, cutting width (max.): 450 mm, power: 0.004 kW (0.01 HP), Two-shaft multi-saw 2x110 kW TOS SVITAVY PWR 422 - Czech production - twin-shaft - DTR documentation TECHNICAL DATA: - max cutting height: 250mm - track width: 450mm - shaft width: 450mm - disc bore diameter: 80mm - shaft diameter: 60mm - min disc diameter: 300mm - max disc diameter: 400mm - max width of input material: 860mm - min length of processed material: 1500mm * From above: - Rejectors: + - Drawing shaft, metal pneumatically pressed: + - rejects: + - drawing shaft, metal, pneumatically pressed: + - pressure: + - saw shaft: + - pressure: + Cjljri Nvvoq H Tcqsgt - 2 pulling shafts, metal pneumatically pressed: + * Bottom: - metal roller, sliding: + - guide: + - rejects: + - track: + - saw shaft: + - track: + - infinitely adjustable feed speed on inverter: 4-40m/min - main motors: 2x110kW - feed motor: about 3kW - electric lifting of the body up/down: 0,55kW - electric adjustment of saw shafts: 2×0.18kW - central lubrication - diameter of the extraction stub: 2x300mm - dimensions L/W/H: 3400x2650x2200mm - weight approx: 7500kg

Condition: good (used), Year of construction: 2009, Functionality: fully functional, travel distance X-axis: 2,500 mm, travel distance Y-axis: 1,120 mm, travel distance Z-axis: 1,250 mm, spindle diameter: 110 mm, spindle speed (max.): 3,000 rpm, table length: 1,250 mm, table width: 1,600 mm, feed length W-axis: 710 mm, The machine is in good technical condition, currently disconnected control system Heidenhain iTNC 530. Clamping pallet size 2X 1250x1600 mm, magazine for 60 pcs. Spindle center cooling CHOV 20 bar, chip conveyor. Cgelq H Tjv Ng Unjcqjt

Condition: good (used), travel distance X-axis: 4,000 mm, travel distance Y-axis: 3,000 mm, travel distance Z-axis: 2,000 mm, table load: 20,000 kg, Spindle diam. 130 mm Spindle nose attachment iso 50 Cjlq H Tevxvcascqegt X-axis stroke: 4000 mm Y-axis stroke: 3000 mm (vertical) Z-axis stroke: 2000 mm W-axis stroke: 800 mm Spindle motor power 37 kw Spindle speed 0 - 3000 rpm Table 1800 x 2500 mm Table capacity 20 tons CNC HEIDENHAIN TNC I 530 ATC 60 places Chip conveyor Electronic handwheel Coolant through spindle Spindle sleeve

Condition: excellent (used), Year of construction: 2001, x travel 1600 mm y travel 1000 mm z travel 780 mm - number of processing axes (excl parallel axes) 5 - X-axis travel 1600 mm - Y-axis travel 1000 mm - Z-axis travel 780 mm - table surface (left-right) 1000 mm - table surface (front-back) 1000 mm - workpiece load (max) 6000 kg - - positioning/indexing 0.001 ° - - positioning/indexing 2.5 ° - - positioning/indexing 2.5 ° - spindle revolutions (max) 2500 /min - drive power 22 kW - number of positions 60 - number of store positions 2 - pallet length 1000 mm - pallet width 1000 mm - number of pallets 2 Cslqjvwgpuj H Tcqegt - space requirements -left/right- 6400 mm - space requirements -front/back- 6900 mm - total height 4000 mm - total weight approx. 26000 kg control HEIDENHAIN TNC 426 The machine is in very good condition and available immediately.

Condition: used, Year of construction: 1996, Functionality: fully functional, 25 MVA oil transformer with expander and Buchholz relay, second-hand, manufactured by Siemens, year of manufacture 1996, 20 kV +- 5 % / 6.3 kV, Dyn5 Cgolq H Tstr Ef Ascqst

Condition: used, Technical details: swing diameter: 200 mm centre distance: 450 mm cross travel: 245 mm Cgslq H Tou Ng Dgscqst longitudinal feed: 830 mm table speed: 0,05-4,5 stufenlos m/min revolution per minute: Schleifspindel 1780, 2050 U/min revolution per minute: Werkstückspindel 50-500 U/min dimensions of grinding wheel: 350x32x127 mm Table dimensions: 2200x280 mm table swivelling to both sides: 9°vor+10°zurück Grad total power requirement: 6,0 kW weight of the machine ca.: 2,2 t dimensions of machine: 2,2x2,05x1,6 m Universal Center Grinding Machine without internal grinding device! - for precision grinding of outer, inner such as cone surfaces - feed of grinding headstock via hydr. or manual possible - table feed hydraulic stepless - grinding spindle swivelable with 60 degrees - workpiece headstock 90 degress swiveable with tapper MK4 - tailstock tapper MK 3 equipment: - dressing device/extruder - coolant tank incl. pump and supply i.D. *

Condition: good (used), turning height: 1,335 mm, workpiece weight (max.): 12,000 kg, turning diameter: 1,500 mm, rapid traverse X-axis: 8 m/min, rapid traverse Z-axis: 8 m/min, spindle speed (max.): 400 rpm, table diameter: 1,250 mm, Tos Hulin Skq 12 retrofitted in 2018 with: - Fagor 8025 T cnc, TS - Maximum turning diameter 1500 mm - Maximum turning height 1030 mm - Maximum workpiece height 1335 mm - Hydraulic chuck diameter 1250 mm Cslqjunhnvj H Tcqsgt - Spindle motor power 40 KW - Rapids 8000 mm/min - Ram stroke 1000 mm - Vertical traverse stroke 800 mm - Chip conveyor - Integral fairing Free deferment in 12/24 months

Condition: like new (used), Year of construction: 2024, Functionality: fully functional, travel distance X-axis: 2,500 mm, travel distance Y-axis: 1,600 mm, travel distance Z-axis: 1,000 mm, spindle diameter: 130 mm, spindle speed (max.): 3,000 rpm, table length: 1,600 mm, table width: 1,800 mm, feed rate X-axis: 10 m/min, feed rate Y-axis: 10 m/min, feed rate Z-axis: 10 m/min, travel distance W-axis: 800 mm, workpiece weight (max.): 12,000 kg, quill stroke: 800 mm, Equipment: cabin, TOS VARNSDORF "T" BORING MACHINE MOD. WHN 130Q Numerical control Heidenhain TNC 640 X-axis travel 2,500 mm Y-axis travel 1,600 mm Z-axis travel 1,000 mm W-axis travel 800 mm Rotary table size 1,600 x 1,800 mm Load capacity 12,000 kg X, Y, Z, W axes feed 10,000 mm/min ISO 50 Din 69871/A spindle Boring spindle diameter 130 mm Rotation speed 3,000 rpm Spindle motor power 37 Kw Tool magazine 40 positions COMPLETE WITH: - 24" TFT CNC display and HR 510 2 remote handwheel with 3 meter cable - Coolant through the spindle 70 bar adjustable - Heidenhain optical scales pressurize resolution of 0.001 mm - Chip conveyor Cgelqevy T Ens H Tcqst - Operator cabin - Movable protective cover for the workspace - Renishaw RMP 60 Q 3D measuring probe - Front and side machine enclosures YEAR 2024

Condition: used, travel distance X-axis: 5,000 mm, travel distance Y-axis: 3,000 mm, travel distance Z-axis: 2,000 mm, table load: 20,000 kg, spindle diameter: 130 mm, spindle speed (min.): 3,000 rpm, Spindle diam. 130 mm Spindle nose attachment iso 50 X-axis stroke: 5000 mm Y-axis stroke: 3000 mm (vertical) Z-axis stroke: 2000 mm Celq H Tcev H A Hneqsgt W-axis stroke: 800 mm Spindle motor power 37 kw Spindle speed 0 - 3000 rpm Table 1800 x 2500 mm Table capacity 20 tons CNC HEIDENHAIN TNC i 530 ATC 60 places Chip conveyor Electronic handwheel Coolant through spindle Spindle sleeve

Condition: used, Year of construction: 1959, turning diameter over bed 380 mm turning diameter over slide rest 215 mm Celq Hsvwgmao Tcqogt turning length 1000 mm weight of the machine ca. 1800 kg dimensions of the machine ca. 2,7 x 1,2 x 1 m The L&Z lathe is in good condition. Scope of delivery incl. extensive accessories and cabinets - 3-jaw chuck - 4-jaw face plate - steady rest

Condition: used, machine/vehicle number: 0257391, height of centers: 160 mm distance between centers: 1500 mm grinding wheel measures: 500 x 127 x 40 mm grinding wheel rotations: 1570/2050 Upm Cjlqogayiwj H Tcqsgt electrical connection: 380 V kW space needed: 4400/6400 x 2000 x 1400 mm weight: ca. 4000 kg

Condition: excellent (used), Functionality: fully functional, turning diameter: 1,000 mm, turning length: 8,000 mm, total length: 10,500 mm, For sale is a used lathe from the Czech manufacturer TOS, model SU 100, with extensive equipment as shown in the photos. Technical specifications: Colq H Tjv Epk Docqsgt Turning diameter over bed: 1,000 mm Turning length: 8,000 mm Extensive equipment as shown in the photos: 1 x 4-jaw chuck 2 x steady rest 1 x travelling steady

Condition: ready for operation (used), Spindle bore: 60 mm Colqsiqtzke H Tcqsgt Swing diameter over bed: 500 mm Center length: 1000 mm Dimensions: 3100x1400x1600mm

Condition: refurbished (used), Index ER 25 Long turning device GT 2351.1300 3 pieces in stock Cgjlsfc Rmcjq H Tcqot

Condition: good (used), Grindable, largest diameter: 200 mm Center distance: 450 mm Weight of the machine approx: Celqjlz Nxwe H Tcqogt 2, 2 t Machine dimensions: