Used Tabe Agb-40 for sale (58,492)

Condition: excellent (used), Vötsch Type: VCL 4200/S Water-cooled climatic test chamber Irradiation device with metal halide radiator Door with window Internal dimensions : Width 2000 mm Height 1000 mm Depth 1150 mm External dimensions : Width 3300 mm Height 2000 mm Depth 1250 mm 2X pipe penetration 125 mm Performance range for temperature tests without irradiation Temperature range - 40°C to +150°C Temperature deviation ± 0.5 K in time, in the supply air to the test room Temperature change rate according to DIN 50 011 Part 12 Heating: approx. 1.0 K/min. Cooling: approx. 1.0 K/min to -30°C Performance range for climatic tests without irradiation Temperature range +10°C to +95°C Temperature constancy ± 1.0 K over time, in the supply air to the test room Humidity range 10 to 95 % r.h. Humidity constancy ± 1 to ± 3 % r.h. over time, in the supply air to the test room Dew point range +5°C to +88°C Irradiation (solar simulation attachment) Irradiation type: 4 pcs. 2 kW metal halide radiators each Irradiance 1000 W/m² ± 5 % in the range 280 to 3000 nm Irradiation uniformity ± 50 W in the guaranteed area Reference plane taking into account the installed lateral reflector plates Test area (W x D) 1700 x 800 mm with distance reference plane - UK irradiation unit of approx. 750 mm or 400 mm above the floor Performance range for temperature tests with irradiation Temperature range -10°C to +100°C Temperature deviation in time ± 1.0 K, in the supply air to the test room Rate of temperature change according to DIN 50 011, part 12 Heating: approx. 1.5 K/min. Cooling: approx. 0.5 K/min. Cgohx Djvccwlenk Tjt Performance range for climatic tests with irradiation Temperature range + 10°C to + 80°C Temperature deviation ± 1.0 K over time, in the supply air to the test room Humidity range 10 % to 85 % r.h. Humidity deviation ± 1 % to ± 3 % r.h. temporally, in the supply air to the test room Dew point range + 5°C to + 76°C Average temperature and humidity changes If temperature and humidity change simultaneously, the humidity is undefined Temperature change + 90°C to 0°C in 1 h 0 °C to - 40°C in 1 h 0 °C to + 90°C in 1 h Humidity change 0 °C to + 90°C / 80 % r.h. in 1 h + 90°C / 80 % r.h. to 0°C in 1 h, whereby the final dehumidification value is not defined. Average temperature and humidity changes If temperature and humidity change simultaneously, the humidity is undefined Temperature change + 47°C to -30°C in 1 h - 30°C to + 23°C in 1 h + 23°C to + 47°C in 1 h Connections: Nominal voltage 400 V +6/-10 %, 3/N, 50 Hz Rated power 23 kW Nominal current 49 A Cekon 63 A plug Connection cable approx. 3.5 m Fuse protection 63 A, slow-blow on site Installation room Heated, with level floor Heat output to the installation room approx. 7 kW with radiation module switched on Weight approx. 2000 kg Condition: used Scope of delivery: (see picture) (Subject to changes and errors in the technical data and specifications!) We will be happy to answer any further questions you may have over the phone.

Condition: good (used), gear motor, electric motor, electric gear motor -Engine manufacturer: VEM -Manufacturer gearbox: VEM -Speed: 40 rpm -Power: 1.1 kW Cgjhx Dnkeckbgas Tot -Design: B3 -Shaft diameter: 40 mm -Protection class: IP 44 -Quantity: 1 piece available -Dimensions: 580/250/H300 mm -Weight: 41 kg

Condition: used, mileage: 627,191 km, power: 250 kW (339.91 HP), first registration: 01/2005, fuel type: diesel, number of seats: 40, gearing type: mechanical, next inspection (TÜV): 05/2025, emission class: euro3, color: white, brakes: retarder, Equipment: ABS, air conditioning, onboard kitchen, parking heater, sideways adjustable, jet ventilation, reading lights, service call, footrests, folding tables, luggage nets, roof luggage rack, double glazing, curtains, front air door, rear air door, seat belts, 2x roof hatch, luggage compartment, electrically adjustable exterior mirrors, vehicle can be fitted with advertising and/or lettering Cohxovnqpgj Dnk Tsgt Our offer is generally without new TÜV approval. If a new TÜV inspection is required, we will be happy to make you an offer from our partner workshops! Vehicle can be covered with advertising and/or lettering. Our general terms of delivery and payment apply. We would be pleased to make you a financing or leasing offer for this object. Please contact us!

Condition: excellent (used), CTS Type: T-40/2000 Air-cooled temperature test chamber Technical design: Cshx Dnoup T Uqok Tjgt Refrigeration unit: air-cooled, low-noise, fully hermetic, infinitely variable power adjustment through electronic monitoring and control system, environmentally friendly refrigerant R404A Door: fully opening door, door hinge left, one-handed operation, lockable. Shelf: Stainless steel, support surface 970 x 980 + 500 mm Max. load per shelf 35 kg Total load with max. grid load 100 kg Test area lighting: 3x halogen lamp 20 W, 12 V Control: 32 bit controller LCD control panel Digital display of set and actual values Numerical input of setpoint values Error messages in plain text RS 232 interface Free switching channels for on-site test material control Temperature range: -40°C to +180°C Nominal voltage: 400V 3/N 50Hz Rated power: 10.4 kW Nominal current: 17.2 A Compressor: TFH2516Z Pipe feed-through NW 50 Control panel Window 570x710 mm Electrical connection, cable length 5m Technical performance data: Temperature tests: Temperature range -40°C to +180°C Temperature deviation ≤ ±0.3 K in time Temperature change rate according to IEC 60068-3-5 Heating 2.5 K/min Cooling 1.5 K/min Heat radiation: approx. 2500 W at +20°C approx. 2100 W at ± 0°C approx. 1500 W at -20°C The technical data refer to an ambient temperature of +25 °C, rated voltage 400V, without test material, without irradiation and without additional equipment. Dimensions: Test volume: 2000 liters Test chamber dimensions: Height 900, width 975, depth 2200 mm External dimensions: Height 1950, width 1290, depth 3145 mm Operating data: Electrical connection: 400 V +6/-10 %, 3/N, 50 Hz Rated power: 17.2 kW Protection class: IP 22 Condensate drain unpressurized R 1/2" internal thread Sound pressure level (according to DIN EN ISO 3744 measured at a distance of 1 m from the front) < 55 dB(A) Weight: approx. 1200 kg The following information is for your safety as a buyer! The following points are carried out on our offered chambers in advance: 1. functional check and replacement of necessary components 2. if necessary, new filling with legally compliant refrigerant 3. leak test with certificate 4. after successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: excellent (used), Compressed air filter, fine filter, filter, pre-filter, intake air filter, air filter housing, air filter housing, generator air filter, ventilation filter -Manufacturer: UCC, Air Filter Air Breather Filter Cjhxovyqvqe Dnk Tjgt -Type: 40 5 -Number: 4x air filters available -Price: per piece -Dimensions: Ø 77 x 65 mm -Weight: 0.2 kg/piece

Condition: good (used), White Type: Walk-in climate simulation cell WK 50 / 40-120 Technical data climatic chamber: Temperature range -40...+120 °C Temperature tolerance: +/- 0.5°C Temperature change rate: 1 K/min Humidity range 15...approx. 95 % r.h. Humidity tolerance +/- 5.0 % r.h. Dimensions: Test room volume: 50m³ External dimensions (WxDxH) approx. 4800mm X 6100mm X 2640mm Test chamber (WxDxH) approx. 4500mm Χ 5000mm Χ 2200mm Door opening (WxH) approx. 3000mm X 2200mm Condition: gebraucht / used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone. Cgjhsuvi R Aex Dnk Tjt

Condition: excellent (used), Here we offer you a Vötsch temperature test chamber. Air-cooled Test chamber: The test chamber is made of highly polished stainless steel material no. 1.4301. The test specimens can be placed on the supplied shelf or on the test chamber floor. Test chamber door: The test chamber door locks the test chamber with a lockable latch. Touch panel: All control and operating commands can be triggered on the "touch panel" operating unit by simply touching the function icons. Feed-throughs: The test chamber is equipped with feed-throughs on the right and left side. Measurement cables and test equipment can be routed into the test chamber through these. Feed-throughs 130∅ Feed-throughs 60 ∅ Test chamber capacity 190 liters Characteristic values for temperature tests: Temperature range - 40°C to +180°C Temperature deviation temporal ± 0.1 to ± 0.5 Spatial ± 0.5 to ± 2.0 Temperature change rate Heating 4 K/min Cooling 3 K/min Heat compensation max.1000 Watt Test chamber dimensions: Width 580 mm ,Depth 450 mm ,Height 750 mm External dimensions: Width 870 mm ,Depth 1280 mm ,Height 1575 mm Electrical connection: Nominal voltage: 3/N/PE AC 400 V ± 10% 50 Hz Rated power: 4.1 kW Rated current: 12.5 A Connection cable: 3.5 m Cohx Dnksqa Dcpj Togt Fuse protection: 16A slow-blow, on site Refrigerant: R-404A Test chamber capacity: approx. 190 liters Weight: approx. 420 kg Type: VT 4018 The following information is for your safety as a buyer! The following points are carried out on our chambers in advance: 1. functional check and replacement of necessary components 2. refilling with legally compliant refrigerant 3. leak test with certificate 4. after successful inspection, the chambers are subjected to a test run, which is monitored with calibrated devices. Condition: second-hand / used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: excellent (used), Here we offer a Weiss temperature chamber. Weiss temperature test chamber With S!MCON / 32 control unit Water-cooled Touch panel" control unit All control and operating commands can be triggered on the "touch panel" control unit by simply touching the all control and operating commands by simply touching the function icons. Levelling feet To compensate for uneven floors and to ensure adequate ventilation of the machine part, the test chamber is equipped with adjustable feet. Cgehx Dnsrak Rmjk Tst Feed-throughs The test chamber is equipped with feed-throughs on the right and left side. Measuring cables and test equipment can be routed through these into the test chamber. Feed-through built into basic equipment R1: NW 125 mm L1: NW 50 mm (refrigerant converted to R-452A) Test chamber capacity: approx. 600 liters External dimensions with hinges and door lock Height 1995 mm, width 1090 mm, depth 1660 mm External dimensions without hinges and door lock Height 1995 mm, width 1000 mm, depth 1660 mm Internal dimensions: Height 950 mm, width 800 mm, depth 800 mm Data for temperature tests: Temperature range: -42 to +180 °C Temperature deviation over time in the center of the usable space: ± 0.1 to ± 0.5 K Spatial temperature deviation: ± 0.5 to ± 1.5 K Temperature change rate (according to IEC 60068-3-5) Heating: 4.0 K/min Cooling: 3.0 K/min Heat compensation max. 2500 W Data for operation: Test room lighting Halogen bulb 2 x 24V, 50W Nominal voltage: 3/N/PE AC 400V ±10% 50Hz Rated current: 15 A Rated power 7.8 kW On-site fuse 16 A slow-blow Sound pressure level approx. measured at a distance of 1m from the front. 1m height 58 dB(A) Refrigerant: R-452A Weight: 620 kg Type: WT3-600/40 The following information is for your safety as a buyer! The following points are carried out on our offered chambers in advance: 1. functional check and replacement of necessary components 2. if necessary, new filling with legally compliant refrigerant 3. leak test with certificate 4. after successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: excellent (used), Here we offer a Weiss temperature chamber. Weiss temperature test chamber With S!MCON / 32 control Air-cooled (refrigerant converted to R-452A) Touch panel" control unit All control and operating commands can be triggered on the "touch panel" control unit by simply touching the function icons. all control and operating commands by simply touching the function icons. Levelling feet To compensate for uneven floors and to ensure adequate ventilation of the machine part, the test chamber is equipped with adjustable feet. Feed-throughs The test chamber is equipped with feed-throughs on the right and left side. Measuring cables and test equipment can be routed through these into the test chamber. Feed-through built into basic equipment R1: NW 125 mm L1: NW 50 mm Test chamber capacity: approx. 600 liters External dimensions with hinges and door lock Height 1995 mm, width 1090 mm, depth 1660 mm External dimensions without hinges and door lock Height 1995 mm, width 1000 mm, depth 1660 mm Internal dimensions: Height 950 mm, width 800 mm, depth 800 mm Data for temperature tests: Temperature range: -42 to +180 °C Temperature deviation over time in the center of the usable space: ± 0.1 to ± 0.5 K Spatial temperature deviation: ± 0.5 to ± 1.5 K Temperature change rate (according to IEC 60068-3-5) Heating: 4.0 K/min Cooling: 3.0 K/min Heat compensation max. 2500 W Data for operation: Test room lighting Halogen bulb 2 x 24V, 50W Nominal voltage: 3/N/PE AC 400V ±10% 50Hz Rated current: 15 A Rated power 7.8 kW On-site fuse 16 A slow-blow Sound pressure level approx. measured at a distance of 1m from the front. 1m height 61 dB(A) Cjhx Derak S Djnk Togt Refrigerant: R-452A Weight: 620 kg Type: WT3-600/40 The following information is for your safety as a buyer! The following points are carried out on our offered chambers in advance: 1. functional check and replacement of necessary components 2. if necessary, new filling with legally compliant refrigerant 3. leak test with certificate 4. after successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: excellent (used), CTS Temperature Test Chamber Here we offer you a CTS temperature test chamber. Cehx Dnkehxyg Hs Tjgt Water cooled Type series: T-40/600 Including metal struts to increase the floor load capacity Test chamber volume: 600 liters Test chamber dimensions: Height approx. 850 mm, width approx. 850 mm, depth approx. 830 mm Outer dimensions: Height approx. 1900 mm, width approx. 1050 mm, depth, approx. 1850 mm Temperature working range: Temperature range -40 to +180°C Temperature deviation ±0.1 to ±0.3 K temporally heating speed: 2,5 K/min cooling rate: 3 K/min Electrical connection 400 V +6% -10%, 3/N, 50 Hz rated power: approx. 5,5kW rated current: approx. 8,5 A Refrigerant: R404A Weight: 550 Kg Type: T-40/600 /011232 For you as a buyer for safety the following information! The following points are carried out on our offered chambers in advance: 1. functional check and exchange of necessary components 2. new filling with legally compliant refrigerant 3. after successful inspection, the chambers are subjected to a test run, which is monitored with calibrated equipment. Condition: used / used Scope of delivery: (See picture) (Changes and errors in the technical data, specifications are reserved!) Further questions we can answer on the phone for you.

Condition: excellent (used), Melag Here we offer you a tabletop autoclave. External dimensions: W 320 mm x H 350 mm x D 150 mm Tank capacity: 18.4 liters Permissible operating temperature: 144 °C Permissible operating overpressure: -0.95 - 3 bar Charging medium: steam/water Power consumption: 3400 W Rated voltage: 230 V Cshxeidmi Ao Dnk Tsgt Type: Vakuklav 40-B Scope of delivery: (as shown) Condition: used / used The autoclave was in operation until disassembly. Further questions we can answer on the phone for you. Written order possible by email or fax

Condition: excellent (used), Espec Type: ARL-1100 Air-cooled climatic test chamber Temperature range: -40 °C to +180 °C Heating rate of change: up to 4.7 K/ min. Cooling rate of change: up to 4.4 K/ min. Humidity range: 10 to 98% r. h. Internal dimensions: Width 1100 mm Height 1000 mm Depth 1000 mm External dimensions: Width 1300 mm Height 1955 mm Depth 2005 mm approx. 1100 liters Rated current: AC 400 V 3φ, 50Hz 23 A Weight approx. 600 kg Refrigerant: R404A The following information is for your safety as a buyer! The following points are carried out on our offered chambers in advance: 1. functional check and replacement of necessary components 2. if necessary, refilling with legally compliant refrigerant 3. leak test with certificate 4. after successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (see picture) Cshx Dnkst Sug Ho Togt (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: excellent (used), CTS test cabinet climatic chamber Here we offer a CTS climatic chamber. Air cooled Test chamber volume: 200 liters Test chamber dimensions: Height 750, width 650, depth 400 mm External dimensions: Height 1800, width 920, depth 1345 mm Temperature working range temperature range: -40°C / +180°C cooling speed: 4 K / min heating speed: 4 K / min Max. heat radiation at +20°C: 3500 W Temperature constancy, temporal: ≤± 0.3 K. Climate working range Temperature range: +10°C to +95°C. Humidity range: +10%to +98% r.H. Connection: 400 V +6% -10%, 3/N, 50 Hz Rated current 9.4 A Rated power 4,8 kw Weight: approx. 450 kg Refrigerant R404A Type: CTS C-40/200 The following points are carried out on our offered chambers in advance: 1. functional check and replacement of necessary components 2. new filling with legally compliant refrigerant 3. after successful inspection, the chambers are subjected to a test run, which is monitored with calibrated equipment. Condition: used / used Scope of delivery: (See picture) (Changes and errors in the technical data, specifications are reserved!) Cgehx Dshwhzwonk Tot Further questions we can answer on the phone for you.

Condition: excellent (used), Lindner Bursting Test Stand Here we offer a Lindner burst test stand. AGB Bursting Test Stand TMM4 Technical data: AGB Bursting Test Stand TMM4 Year of manufacture 2015 Rated voltage: 3/N/PE AC 400V Rated power: 5,5 kW Temperature range chamber: RT ... 180°C Temperature range medium: RT ... 135°C Pressure range: 0 ... 5 bar Compressed air supply: 6-8 bar Test medium: glycol / water Heat transfer oil Fragoltherm Q-HTF Dimensions: length 2150 mm x width 1050 mm x 2160 mm Operating voltage: 3/N/PE AC 400V +/-10% 50Hz Cehslx A T Dex Dnk Tjgt power: 5,5kW rated current: 8A Back-up fuse: 16A Control voltage: 24VDC PLC system: S7-1215 DC/DC/RLY For the commissioning of the burst test bench the following items are necessary: Pump, cooling tower & fire alarm panel these are not supplied. Type: AGB burst test rig TMM4 weight approx. 705 kg Condition: used / used Scope of supply: (See picture) (Changes and errors in the technical data, specifications are reserved!) Further questions we can answer on the phone for you.

Condition: excellent (used), CTS Type: C-40/60 CTS small climate chamber air-cooled Test volume: 60 liters Cjhxju Hlb Es Dnk Tsgt Temperature range: -40 °C / +180 °C Humidity range 10% to 98% relative humidity +10 °C to +90 °C in the temperature range +5 °C to +89.5 °C in the dew point range Dimensions (WxDxH): Inside: 400 mm x 345 mm x 425 mm Housing: 560 mm x 845 mm x 1575 mm Refrigerant: R-404A Nominal voltage: 230V 1/N 50 Hz Output: 3.3 kW Rated current: 13 A The following information is for your safety as a buyer! The following points are carried out on our offered chambers in advance: 1. functional check and replacement of necessary components 2. if necessary, new filling with legally compliant refrigerant 3. leak test with certificate 4. after successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Year of construction: 2022, Condition: excellent (used), Dycometal Type: CCK -40/1500T Climate chamber water-cooled Volume liters 1500 Internal dimensions height 1000 mm width 1000 mmm depth 1500 mm External dimensions Height 2200 mm Width 1293 mmm Depth 3400 mm Thermal test Minimum temperature -40°C Maximum temperature +150°C Thermal gradient cooling 2.0 K/min. Thermal gradient during heating 3.5 K/min. Temperature stability ±0.1°C to ±0.3°C Temperature uniformity ±0.5°C to 1.5°C Climate test Temperature range +10°C to +90°C Humidity range 10% to 98% %RH Dew point range +6.5°C to +86°C Humidity stability ±1%RH to ±3%RH Water-cooled condenser Nominal voltage 400 V 3N~PE 50 Hz Cgjhx Deu N Uugenk Tjt Output 16.1 kW 27.5 A Refrigerant R-452A Weight: 1120 kg Condition: second-hand / used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: excellent (used), CTS Type: C-40/350 CTS air-cooled temperature test chamber Test chamber volume 350 liters Test chamber dimensions: Height 750 mm Width 650 mm Depth 720 mm External dimensions: Height 1800 mm Width 850 mm Depth 1640 mm Cgohx Djg Sr Egonk Tet Design: Floor-standing appliance Temperature working range: Temperature range -40°C/+180°C Cooling speed: 4.0 K/min Heating speed: 3.0 K/min Electrical connection: 400V +6-10 %, 3/N, 50Hz Connected load: 5.5 kW Rated current: 8.3 A Condenser refrigeration machine: Air-cooled Refrigerant: R-404A Weight: 550 kg The following information is for your safety as a buyer! The following points are carried out on our offered chambers in advance: 1. functional check and replacement of necessary components 2. if necessary, new filling with legally compliant refrigerant 3. leak test with certificate 4. after successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: excellent (used), CTS climate chamber climate test cell Here we offer a CTS climate chamber climate test cell. Available from mid-January 2023! Water cooled Cshxjip Dp So Dnk Tegt Height adjustable! Footprint approx. (W x D x H): 3755x 3470x 2480 Test area approx. (W x D x H): 2500x 2720x 2200 Test space volume: approx. 15m³ Temperature range: -40°C to +140°C Temperature deviation 1 K temporally Temperature change speed in the average without heat radiation Measured in the supply air heating: 2 K/min Cooling: 1 K/min from +110°C to -35°C Climatic tests: Temperature range: +10 °C to +90 °C Humidity range . +30 % to +95% r.H. dew point range : +5°C to 89°C temperature deviation 0,5 K temporal Humidity deviation ±1- ±3% r.H. temporal nominal voltage: 400V 3/N, PE, 50 Hz rated power: 53,5 KW Rated current: 92,3 A Compressor: S6J-16.2 + chiller Refrigerant: R404A Weight 5500 kg Type: CW-40/16 Condition: used / used Scope of delivery: (See picture) (Changes and errors in the technical data, specifications are reserved!) Further questions we can answer on the phone for you.

Condition: excellent (used), Here we offer a Weiss climate test chamber. Weiss climate test chamber water-cooled (refrigerant converted to R-452A) Temperature test Volume 335 liters Test chamber dimensions: Test chamber dimensions: Height 750 mm, width 580 mm, depth 765 mm External dimensions: Height 1775 mm, width 870 mm, depth 1600 mm Minimum temperature -42°C Maximum temperature +180°C Temperature change rate, cooling 4 K/min Temperature change rate, heating 3.2 K/min Temperature deviation, temporal ± 0.1 to ± 0.5 K Temperature homogeneity, spatial ± 0.5 to ±1.5 K Climate test: Temperature range +10°C to +95°C Dew point range -3°C to +94°C Humidity range 10 to 98% r.h. Temperature deviation, temporal ± 0.1 to ± 0.3 K Temperature homogeneity, spatial ± 0.5 to ±1 K Humidity deviation, temporal ± 1 to ± 3 % r.h. Voltage: 3/N/PE AC 400V±10% 50Hz Rated power 4.1 kW Rated current: 14 A Refrigerant: R-452A Type: WK3-340/40 Weight Approx. 515 kg The following information is for your safety as a buyer! The following points are carried out on our offered chambers in advance: 1. functional check and replacement of necessary components 2. if necessary, new filling with legally compliant refrigerant 3. leak test with certificate 4. after successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) Cohx Doq U Sdcsnk Tsgt We will be happy to answer any further questions you may have on the phone.

Condition: excellent (used), Leybold two-stage rotary vane vacuum pump Here we offer a Leybold two-stage rotary vane vacuum pump. Cgehx Dnjq Su D Njk Tjt The TRIVAC B are oil-sealed vacuum pumps based on the rotary vane principle. The oil injected into the pumping chamber is used for sealing, lubrication and cooling. The pump body is made up of individual parts without sealing elements. These are pinned to ensure easy disassembly and reassembly. Ultimate pressure: 2 x 10-³ mbar Motor: 3-ph, 230/400 V, 50/60 Hz Pumping speed (50 Hz): 40 m³/h Pumping speed (60 Hz): 48 m³/h Environmentally friendly: Quiet Vibration-free operation Energy-saving Energy-saving: Low power consumption Low heat emission Modern vacuum technology: High pumping speed up to ultimate pressure Low final pressure, even with gas ballast High water vapor compatibility Continuous operation even at 1000 mbar Built-in oil pump, force-lubricated slide bearings Minimal air loss High leak tightness (4He-capable) Technical data: Product: TRIVAC D 40 B Connection flange suction side: DN 40 ISO-KF Connection flange pressure side: DN 40 ISO-KF Nominal pumping speed at 50 Hz: 46.0 m3/h Nominal pumping speed at 60 Hz: 55.0 m3/h Pumping speed at 50 Hz: 40.0 m3/h Pumping speed at 60 Hz: 48.0 m3/h Final partial pressure without gas ballast: 1.0 x 10-4 mbar Final total pressure without gas ballast: < 2.0 x 10-3 mbar Final total pressure with gas ballast: < 5.0 x 10-3 mbar Water vapor compatibility at 50 Hz: 40.0 mbar Water vapor compatibility at 60 Hz: 40.0 mbar Water vapor capacity at 50 Hz: 1,184 g/h Water vapor capacity at 60 Hz: 1,184 g/h Operating fluid quantity min.: 1.7 l max.: 2.6 l Sound level according to DIN 45 635 without gas ballast: 57 db(A) with gas ballast: 59 db(A) Mains connection: 3-ph, 200 / 200-240 / 380-400 V ±10%, 50 Hz 3-ph, 200-240 / 380-480 V ±10%, 60 Hz Motor power: 2.2 kW Motor speed at 50 Hz: 1,430 min-1 Motor speed at 60 Hz: 1,735 min -1 Motor protection class: IP 55 Permissible ambient temperature: +12 to +40°C Weight: 73.0 kg Type: Trivac D 40 B Condition: gebraucht / used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: excellent (used), Vötsch Type: VC 4200/S Climate test chamber 2500 liters water-cooled Temperature test: Temperature range -40°C to + 180°C Temperature deviation in time: ± 0.3 to ± 1.0 Spatial temperature deviation: ± 1.0 to ± 2.0 Temperature gradient 2 to 4 Heating speed: 2.0 K/min Cooling rate: 3.0 K/min Climatic tests: Temperature range: +10 °C to +90 °C Temperature deviation over time: ± 0.1 to ± 0.5 Temperature deviation over time: ± 1 to ± 1.5 Temperature gradient 2 to 3 Humidity range: 10% to 98% r.h. Humidity deviation over time: + 1 to 3 % r.h. Dew point range +5 to +89°C Test room dimensions: Width approx. 2000 mm x depth 1150 mm x height 1150 mm External dimensions: Width approx. 3500 mm x depth 1450 mm x height 2100 mm Nominal voltage 3/N/PE AC 400 V ±10%50Hz Rated power 13 kW Nominal current 21 A Cgshx Dnksu Au Uto Tet Refrigerant R-452A Weight approx. 1350 kg The following information is for your safety as a buyer! The following points are carried out on our offered chambers in advance: 1. functional check and replacement of necessary components 2. if necessary, refilling with legally compliant refrigerant 3. leak test with certificate 4. after successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: excellent (used), Vötsch Type: VT³ 4150 Vötsch temperature test chamber Air-cooled Rated voltage: 3/N/PE AC, 400 V ±10 %, 50 Hz Rated power: 11.5 kW Rated current: 22.0 A Rate of change: Cooling approx. 3.5 K/min. Rate of change: Heating approx. 4 K/min. Cgehx Dnsu Nh Rbok Tot Temperature test Temperature range -40°C to + 180°C Display plan External dimensions: W x D x H approx. 1390 x 2380 x 1995 mm Test chamber dimensions: W x D x H approx. 1100 x 1475 x 950 mm Weight approx. 1020 kg / 1540 liters Refrigerant R 404A The following information is for your safety as a buyer! The following points are carried out on our offered chambers in advance: 1. functional check and replacement of necessary components 2. if necessary, refilling with legally compliant refrigerant 3. leak test with certificate 4. after successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: excellent (used), Here we offer a Weiss temperature chamber. Weiss temperature test chamber With S!MCON / 32 control Water-cooled (refrigerant converted to R-452A) Touch panel" control unit All control and operating commands can be triggered on the "touch panel" control unit by simply touching the function icons. all control and operating commands by simply touching the function icons. Levelling feet To compensate for uneven floors and to ensure adequate ventilation of the machine part, the test chamber is equipped with adjustable feet. Feed-throughs The test chamber is equipped with feed-throughs on the right and left side. Measuring cables and test equipment can be routed through these into the test chamber. Feed-through built into basic equipment R1: NW 125 mm L1: NW 50 mm Test chamber capacity: approx. 335 liters Test chamber dimensions: Height 750 mm, width 580 mm, depth 765 mm External dimensions: Height 1775 mm, width 870 mm, depth 1600 mm Data for temperature tests: Temperature range: -42 to +180 °C Temperature deviation over time in the center of the usable space: ± 0.1 to ± 0.5 K Spatial temperature deviation: ± 0.5 to ± 1.5 K Temperature change rate Heating: 3.2 K/min Cooling: 4.0 K/min Heat compensation max. 2300 W Data for operation: Test room lighting Halogen bulb 2x 24V, 50W Rated voltage: 3/N / PE AC 400 V ± 10% 50 Hz Cgohx Dnkorbigfe Tot Rated current: 14 A Rated power 4.1 kW On-site fuse 16 A slow-blow Sound pressure level approx. measured at a distance of 1 m from the front. 1m height 56 dB(A) Refrigerant: R-452A Weight: 515 kg Type: WT3-340/40 The following information is for your safety as a buyer! The following points are carried out on our offered chambers in advance: 1. functional check and replacement of necessary components 2. if necessary, new filling with legally compliant refrigerant 3. leak test with certificate 4. after successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: excellent (used), CTS Type: C-40/1000 CTS climatic test chamber Condenser chiller air-cooled Control: 32 bit controller LCD control panel Digital display of setpoints and actual values Numerical input of setpoints Error messages in plain text RS 232 interface Free switching channels for on-site test material control Temperature test: Temperature range: -40°C to +180°C Temperature change rate Heating speed 2.0 K/min Cooling rate 2.5 K/min Temperature deviation ± 0.1 to ± 0.3 K in time Heat radiation: approx. 2500 W at +20°C approx. 2500 W at ± 0°C approx. 1500 W at -20°C Climate Working range: Temperature range +10°C to +95°C Humidity range 10 to 98% r.h. Dew point range I +7 to +94°C Dew point range II -10 to +7°C Temperature deviation ± 0.1 to ± 0.3 K in time Humidity constancy I, temporal ± 0.5 to ± 1.5 % r.h. Humidity constancy II, temporal ± 1 to ± 3 % r.h. Panorama window 570 x 710 mm Test chamber dimensions Width 1000 mm Depth 1100 mm Height 900 mm External dimensions Width 1270 mm Depth 2220 mm Height 1950 mm Test chamber volume 1000 liters Pipe feed-throughs, ø 50 Electrical connection: 400 V +6/-10% 3/N, PE 50 Hz Connected load: 8.4 kW Rated current: 12.4 A Refrigerant: R-404A Cgshx Dnsru Dzusk Tet Weight: 800 kg The following information is for your safety as a buyer! The following points are carried out on our offered chambers in advance: 1. functional check and replacement of necessary components 2. if necessary, new filling with legally compliant refrigerant 3. leak test with certificate 4. after successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: excellent (used), Internal dimensions (net) H approx. 2150 mm W approx. 3000 mm D approx. 6000 mm Air circulation system (on chamber rear wall) Width approx. 800 mm External dimensions with machine unit and without control cabinets Height approx. 3360 mm Width approx. 3320 mm Depth approx. 8620 mm Machine room, attached to the rear wall of the chamber Height approx. 2340 mm Width approx. 3320 mm Depth approx. 1500 mm Electrical control cabinet, mounted on the side of the base frame Height approx. 2340 mm Width approx. 2400 mm Depth approx. 600 mm Chamber door (double-leaf) Height approx. 2150 mm Width approx. 3000 mm Pedestrian door (single-leaf) Height approx. 1900 mm Width approx. 900 mm Lighting (switch next to pedestrian door) 4 incandescent lamps 60W Feed-throughs 4 pcs. 125 mm ∅ Floor load capacity 30,000 N/m² (surface load); 2,500 N per polyamide wheel Ø100mm; 4,000 N for a wheel with 4 cm² Ceiling opening (clear dimensions of the lower disk) Length approx. 600 mm Width approx. 700 mm Quantity: 10 pieces Ceiling load: 10 SoSi radiators + 1 person 90 kg Working temperature range: Cgshx Dnkjtrmm Nj Tst Temperature range -40 °C ... +120 °C (discontinuous) Cooling speed: approx. 1 K/min. linear from 80°C to -40°C with test specimen mass and without thermal load, measured in the air outlet of the air circulation system. At temperatures < (-20°C) the recirculated air volume is reduced by 50%. (e.g. PV 1200) Heating speed: approx. 1 K/min. linear from -30°C to +90°C with test specimen mass and without thermal load, measured in the air outlet of the air circulation system. (e.g. PR 308.2) Test specimen mass: 600 kg aluminum (vehicle - partial body) Working range climate without sunlight simulation: Temperature range: +10 °C ...+95 °C Temperature constancy: ≤ ± 0.5 K (temporal) Temperature constancy: ≤ ± 2 K (spatial) Humidity range: 20 ... 80 % r.h., without thermal load Dew point temperature range: -2 °C ...85 °C without thermal load Climate working range with sunlight simulation: Temperature range: +23 °C ...+50 °C Temperature constancy: ≤ ± 0.5 K (temporal) Humidity range: 20 ... 70 % r.h., with thermal load Dew point temperature range: -2 °C ...43 °C without thermal load Thermal load of the SoSi: Max. 10 kW Temperature and humidity instances: Temperature The following maximum deviation is specified for the temperature in the climate and temperature range (including measurement uncertainty and with test material): Blow-out after 15 minutes: ±1K Intake after 45 minutes: ±1.5K (external sensor) Humidity For the relative humidity at the operating point 80°C / 80% r.h. the following maximum deviation (including measurement uncertainty and with test material) is specified: Blow-out after 30 minutes: ±3% r.h. Intake after 60 minutes: ±3% r.h. (external sensor) Connection and consumption data: Air-cooled refrigeration unit, maximum air temperature +38°C Refrigerant R 404 A and R23 Water supply for humidifier: Approx. 40 l/h = 40 kg/h installed steam output, demineralized water, electrical conductivity 5-20 μS/m Mains connection: 400 V; 3 PH + N + PE; 50 Hz Connected load: 250 kVA, 350 A Connection according to VDE 0110 group 2: 5x185 mm2 CU On-site fuse protection: 355 A Air circulation volume (FI-controlled): 24,000 to 28,000 m³/h FC basic setting: 50% (achievement of the parameters) Technical data solar simulation: Manufacturer: BF Engineering GmbH Type: G-BEM-1119 Number of lights: EPSU 2 x 2k_HQI Ballast: 10 Ignitor: IGC-4k-03 Light source: OSRAM HQI 2000W High Flux 3〜/ N / PE