Used Tabe Agb-30 for sale (59,808)

Year of construction: 2005, Condition: ready for operation (used), Max. bending diameter: 30mm, an inspection is possible. Djln Hjrc Hiijy Hpscg

Condition: used, overall weight: 41,000 kg, empty load weight: 12,640 kg, maximum load weight: 28,360 kg, loading space length: 9,900 mm, loading space width: 2,550 mm, loading space height: 910 mm, loading space volume: 22 m³, first registration: 06/2023, next inspection (TÜV): 06/2025, suspension: air, color: other, tire size: 235/75 R 17.5, gearing type: other, front tire size: 235/75 R 17.5, driver cabin: other, emission class: none, Available immediately for rental periods of 4 weeks or more - Contact O. Schinke o. Platform length 3,800 mm, loading length 9,400 mm, loading width 2,550 mm, ramp incline 1,300 mm, Rear loading ramps 2,950 x 1,700 x 900 mm ramp angle approx. 11 degrees, hydraulic ramp jack, ramp hydraulically movable, Grease aid, smart board, loading bed extension, Spare wheel holder, including spare wheel, storage box, 1 support at the front: telescopic support aluminum leg for uncoupling, 2 foldable support legs at the rear with spring holder, To operate the hydraulic components, a corresponding truck hydraulic system with forward and reverse air is required (not included in delivery) also available as a rental vehicle in the long term! Contact us - we will make you our individual offer.   * ABS Doln Hy Hjvwliyjpocg * Steering knuckle on the 2nd and 3rd axle * Side impact protection * Rubber-metal pads on the loading ramps * Plastic tool box * Single lift axle * Platform side walls * Hydraulic ramp jack * Hydraulically movable ramps * Spare wheel holder * Rotating beacon * SAF axles * Smart board * Supports * Warning package * Central lubrication system We expressly reserve the right to sell the item prior to sale, as we also offer this item on other portals. Information about accessories is provided without guarantee, subject to changes, prior sale or errors. We offer and strongly recommend an inspection and test so that the buyer does not have any false ideas about the condition and suitability. Inspections and tests are possible at any time by appointment and are expressly desired.   We take care of all formalities and hand over the vehicle with the desired transfer license plates for an additional charge. Some of the images have been edited and are for initial viewing only. If you are interested, please contact us and request current images.

Year of construction: 2020, operating hours: 0 h, Condition: as good as new (ex-display), High-pressure cleaning device, high-pressure flushing device, high-pressure built-in flushing device on hot-dip galvanized and painted high-quality steel frames with forklift lugs suitable for installation in company vehicles. PTC Moses 60/200, 75/150, 30/300, 75/210XL, 84/190XL, 102/150XL and 50/300XL similar but no finishing time & jib, Karo, Leistikow, Müller, Rioned, Rockstrah, Rom, Rowo,... The following models are available: Moses 60/200 | 60l/min at 200bar | Engine: Yanmar 3TNV88C 27,5kW Stage V Moses 75/150 | 75l/min at 150bar | Engine: Yanmar 3TNV88C 27,5kW Stage V Moses 30/300 | 30l/min at 300bar | Engine: Yanmar 3TNV88C 27,5kW Stage V Moses XL 75/210 | 75l/min at 210bar | Engine: Yanmar 4TNV88C 35,5kW Stage V Moses XL 84/190 | 84l/min at 190bar | Engine: Yanmar 4TNV88C 35,5kW Stage V Moses XL 102/150 | 102l/min at 150bar | Engine: Yanmar 4TNV88C 35,5kW Stage V Moses XL 50/300 | 50l/min at 300bar | Engine: Yanmar 4TNV88C 35,5kW Stage V DIMENSIONS / WEIGHT: dimensions models with 27,5kW without water tank LxWxH: approx. 910x1.220x1.200mm Dimensions models with 35,5kW without water tank LxWxH: approx. 1.240x1.310x1.300mm Empty weight without water tank: approx. 550-700 kg HIGH PRESSURE PUMP: Manufacturer: HPP Model: CLW for Standard and ELS for XL models Feed rate: max. 102 l/min. Operating pressure: max. 300 bar MOTOR: Manufacturer: Yanmar Model: 3TNV88C and 4TNV88C Dcjlnsf Ar Exe Hy Hpjg Fuel: Diesel Cooling: Liquid Cylinders: 3 and 4 Max power: 37-48 hp (27.5-35.5 kW) Max engine speed: 3. [...]

Condition: used, mileage: 66,944 km, power: 225 kW (305.91 HP), first registration: 09/1989, overall weight: 18,000 kg, fuel type: diesel, color: red, axle configuration: 2 axles, gearing type: mechanical, * Anfragen gerne per WhatsApp * Abrollkipper Marrel * Typ MA 19.50 * hydr. Unterfahrschutz * Radstand 4,80 m * 8 Gang Schaltgetriebe + Splitt * Federung: Blatt/Blatt * V8 Motor Dcsln Hei Had Sey Hpsg * Arbeitsbeleuchtung * AHK + DL- Anschlüsse * Staubox * 4558 Betriebsstunden * Differenzialsperre * 3- Sitzer * Dachluke * Blaulicht * Reifen 315/80R22,5 ca. 80-70% * Feuerwehrfahrzeug * Fahrzeug aus 1. Hand * deutsches Fahrzeug * gegen Aufpreis mit Abrollcontainer * · Netto-Verkauf innerhalb der EU wird nur noch mit MWST Kaution und dem Nachweis der Zulassung im Bestimmungsland (Gelangensbestätigung) durchgeführt, · Verkauf nur an Gewerbe, Transport zum Hafen möglich, Dieses Angebot ist unverbindlich und freibleibend. Irrtum und Zwischenverkauf vorbehalten. · Keine Gewähr auf Eingabefehler. Besichtigungen nur nach Vereinbarung, WhatsApp

Condition: new, Year of construction: 2025, Functionality: fully functional, number of drawers: 30, SLIDING RACK FOR GLASS M80-30 MANUFACTURED IN 2025/ BRAND NEW We manufacture sliding racks for glass pane storage (boxes with glass) or other panel materials (metal sheets, quartz sinters, polycarbonates, furniture boards). We design and manufacture our racks from scratch in Poland. The materials which we use for manufacturing hold the proper certificates of durability and they are subject to quality control on a continuous basis. Storage racks consist of sliding and slightly inclined drawers. They save up to 75% of space because all the partitions are parallel and they are separated every 10 millimetres. We also offer various sizes and load-bearing capacities. However, after consultations, we are able to manufacture a storage rack of different parameters, considering your individual conditions and requirements. The inclination of spans depends on assembly – it may be right hand sided or left hand sided. We recommend this storage rack especially to glass production facilities, stoneworks facilities, furniture production facilities and advertising companies, which want to use their space effectively. The racks are delivered for self-assembly in a package. The assembly is very simple and easy owing to our long-term experience which allowed us to create a well-thought product which is attached with the assembly instructions, making the assembly trouble-free. In case of any problems, do not hesitate to contact our technical department. We also provide charged assembly services by our technicians in your location. M80-30 RACK TECHNICAL DATA Intended use – single glass panes 255 cm x 160 cm Maximum pane size - 275 cm x 170 cm Number of partitions -30 The width of the storage strip for glass – 8 cm The length of the storage strip for glass - 308 cm The material on which glass is placed – wooden board 308 cm x 8 cm x 2.5 cm Structure height (A) – 218 cm Djln Hyjha E S Ts Hpocg Structure width (B)- 436 cm Structure depth (C)-318 cm Space needed for the correct use of the rack – 27 m2 Requirements for the ground – smooth/straight The number of the partition guide bearings – 8 pcs. Front wheel – Ø 160 / reinforced polyamide Rear wheel – steel wheel with a bearing / rolled along the profile Colour - RAL 7040 (grey) Anti-corrosion protection – phosphating and powder-coating of steel elements Permissible load-bearing capacity of a single partition – 900 kg Permissible load-bearing capacity of the whole rack – 27000 kg Partitions inclination – left or right – depending on assembly Assembly time - 14 hours The number of people required for assembly – 2 people DOCUMENTS ATTACHED TO M80-30 RACK - User’s Manual - Assembly Instructions - Rating plate - 12 months’ warranty The product is delivered as a whole ready for use. We also deliver our racks for glass to the EU countries and other countries.

Condition: new, Year of construction: 2024, machine/vehicle number: 302340, Profile Bending machine KB Türkei model MB 30 bottom shaft 30 mm top shaft 35 mm Doln Hy Hed S Uf Sspecg two rollers driven with basement capacity: up to round tube 48 x 3,0 mm flat material 50x10 mm square tube 40x40x3,0 mm weight 170 kg motor 0,75 kw 400 Volt 50 Hz 3 ph.

Year of construction: 2008, Condition: ready for operation (used), A planetary mixer Herbst without vessel is available. Speed range: 40rpm-150rpm, machine dimensions X/Y/Z: approx. 811mm/811mm/1732mm, weight: approx. 250kg. Without mixing vessel. Documentation available. On-site inspection is possible. Dsln Hyjvpvizo Hpscg

Condition: excellent (used), Year of construction: 2021, Functionality: fully functional, machine/vehicle number: 2109P1964004, type of input current: three-phase, overall weight: 148 kg, nominal voltage: 400 V, total width: 400 mm, total length: 800 mm, total height: 1,650 mm, input voltage: 400 V, We sell a Legrand KEOR T EVO 30 backup power supply. Regularly serviced, including preventive inspections. Complete battery replacement in 2024. The backup power supply also includes a network card. Dcelnovyzr Ns Hy Hpog

Year of construction: 2009, operating hours: 1,500 h, Condition: used, Skid similar but not Dynajet, Oertzen, Falch, DIBO, ... S500-30E-C - High pressure pump: Speck P52/30-500 30l/min. at 500bar (year 12/16) - Engine: electric 30kW - 400l water tank - pressure gauge - pressure regulator - safety valve - Steel frame powder coated - Aluminum covers - Forklift lugs - Dimensions with 400l water tank: approx. 1.250 x 1.510 x 1.260 Djln Hyeg Tm Nbo Hpecg - Empty weight: 426 kg - Year of construction: 2009, new high pressure pump12/2016 - Operating hours: approx. 1500 h

Condition: good (used), Year of construction: 2014, operating hours: 19,000 h, Functionality: fully functional, travel distance X-axis: 1,300 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 675 mm, controller model: SIEMENS SINUMERIK, table load: 1,500 kg, spindle speed (max.): 12,000 rpm, Condition of the spindle: Newly overhauled (max. 100 hours since overhaul, exchange 12/2023) Rotating option - spindle lockable + table rotation TECHNICAL DETAILS Control: SIEMENS SINUMERIK X-axis: 1,300 mm Y-axis: 600 mm Z-axis: 675 mm B-axis: 360° C-axis: 360° Spindle Spindle mount: HSK 63A Spindle speed: 12,000 rpm Head swivel angle: ± 105° Table data Max. table load: 1,500 kg Max. rotary table diameter: 940 mm Table speed range: 800 rpm Tool data Tool magazine: 60 pieces Max. tool length: 340 mm Max. tool diameter: 70 mm Tool change time: 3.5 / 6.5 s Performance data Delsvxkgtsn Hy Hpocg Rapid traverse: 30 m/min Machine weight: approx. 9.5 t Operating hours Drives on: approx. 19,000 h EQUIPMENT - HSK 63 spindle, newly overhauled - Renishaw measuring probe - Extraction

Condition: new, Year of construction: 2025, Functionality: fully functional, number of drawers: 30, warranty duration: 12 months, Our company (EXPOGLASS®) manufactures machines, glass racks for the glass industry. Our offer includes a 321 x 255 pull-out glass rack. New product on request. Technical data : Number of drawers - 30 Size of panes - 2550 X 3210 Djljh Uudvjn Hy Hpscg for storage Load capacity of a single drawer - 1500 kg Loading space width - 80 mm Total storage width - 4460 mm Orientation (tilt side of drawers) - universal (depends on assembly) Number of positioning rollers per drawer - 8, bearing-mounted Construction - modular (combinable) Material of the front wheel of the drawer - floor friendly polyamide Rear wheel of drawer - steel - turned, bearing-mounted, with double flange, running on steel track We export our products all over the world.

Condition: used, clamping head, deadbolt collet, collet sleeves, collet, tool holder, tool holder, milling holder, milling tool, clamping sleeves Dcoln Hysu S Tbzj Hpeg -Clamping sleeves: length 80 mm, 5 pieces -Sizes: Ø 15/16/20/25/30 mm -Price/Delivery: complete -Transport dimensions: 140/90/H80 mm -Weight: 1.8 kg

Year of construction: 1993, Condition: ready for operation (used), Number of spooling positions: 2x 6, number of take-off pulley drives: 1 group drive, number of layings: 1 group laying, wire diameter: 0.15-0.3mm, bore diameter 22mm, winding speed: 20-120/min, max. winding strength: 78.5MPA, connected load: 4.5kW, material: stainless steel and brass, spool range: K160 to K250 acc. to DIN 46399, with group drive of take-off pulleys for all spooling positions and group laying for all spooling positions for conventional flanged spools. Doln Hy Hjn I T Tgepjcg

Condition: used, overall weight: 30,000 kg, maximum load weight: 23,680 kg, axle configuration: 3 axles, loading space length: 8,500 mm, first registration: 09/1986, total width: 2,500 mm, total height: 3,200 mm, Goldhofer low loader - Type: TUE 3-24/80 - TÜV due: 03.2025 - SP due: 09.2024 - Loading length: 8.5 m - Length of ramps 3.4 m - Loading height: 0.9 m - Towing eye: 40mm - Leaf spring - BPW axles Subject to errors and prior sale. Dcjljvvq Hzon Hy Hpog Internal vehicle number: 10608

Condition: used, Year of construction: 1997, pressure 225 t chamfer lenght 3050 mm distance between columns 2550 mm column arm 300 mm ajustment speed 110 mm/sec work speed 9.0 mm/sec return speed 130 mm/sec work stroke 240 mm dayligth 320 - 560 mm table height 1000 mm table width 200 mm oil volume 350 ltr. operating pressure max. 296 bar air pressure 4.5 - 6.0 bar voltage 400 Volt total power requirement 18.5 kW weight 14900 kg range L-W-H 5180 x 2400 x 3100 mm - in checked condition - machine video - ?v=ebbbzSYMxKw Furnishing: - electro-hydraulic CNC die bending/press brake - CYBELEC CNC control "ModEva 12S", swiveling at the front right * High-resolution graphic color screen 14 inches * Representation as a line, area or volume drawing of the product * Clear, concise menus in the operator's language * Large tools and products library - CNC-controlled back gauge adjustment (X-axis) * Stop range X axis of bending line .. 5.0 - 1.000 mm * Adjustment speed .. max. 250 mm/sec. - CNC-controlled vertical adjustment of the stop fingers (R axis) * Adjustment range of table surface .. 115 - 265 mm * Adjustment speed .. max. 100 mm/sec. * Adjustment via SERVO motors - CNC-controlled adjustment of the stop fingers left-right (Z1+Z2 axis) * Adjustment range Z1 .. 405 - 2565 mm * Adjustment range Z2 .. 485 - 2645 mm * Adjustment speed .. max. 1000 mm/sec. - WILA CNC-controlled electric table crowning - pneumatic EHT upper tool clamping - manual lower tool clamping - 1x freely movable 2 hand/foot control - 2x front, movable support arms - rear protective device (sliding protective grille) - side protection device (pivoting protective grille) Dolnsu S Rqyo Hy Hpocg - 1x set of EHT deer foot upper tool - split (3.000 mm) - 1x set of EHT lower tools - split (3.000 mm) - original operating instructions (machine + control)

Condition: ready for operation (used), Year of construction: 2004, Functionality: fully functional, travel distance X-axis: 6,000 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 600 mm, controller model: HEIDENHAIN iTNC 530, workpiece weight (max.): 800 kg, TECHNICAL DETAILS Control: HEIDENHAIN iTNC 530 Travel X: 6,000 mm Travel Y: 800 mm Travel Z: 600 mm Doln Hy Hevxhhnspecg Spindle mount: SK 50 Table load: 3,000 kg Workpiece weight: max. 800 kg Spindle speed: 20 - 9,000 rpm Torque: max. 165 Nm MACHINE DETAILS Main drive: 60 kW Machine weight: approx. 24 t

Year of construction: 2004, Condition: good (used), Manufacturer: Hein Lehmann Type: LF 2,0 – 6,30 / 30 ED Size: 2.000mm x 6.300 mm Decks: 1 Year of Manufacture: 2004 Dcoln Hy Hjh Ty Tqopsg With Frame.

Year of construction: 2004, Condition: ready for operation (used), There are two identical suction units available, volume flow: 7310m³/h, pipe diameter: 300mm, pressure increase: 2700Pa, rotational speed: 3000/min, length: 2000mm, width: 1300mm, height: 4500mm. Dolnslyr Aao Hy Hpecg

Year of construction: 1991, Condition: ready for operation (used), Max. stroke speed: 600-2000/min, feed: 10-80mm, with oil cooler. Djlsgf Icken Hy Hpocg

Year of construction: 1975, Condition: ready for operation (used), Max. pressing force: 30t, stroke speed: 100-600/min, stroke adjustment: 8-40mm, length: 1200mm, width: 1160mm, height: 2150mm, weight: 2.5t. Dcsljht Hddjn Hy Hpeg

Condition: ready for operation (used), Max. pressing force: 30t, stroke speed: 100-600/min, stroke adjustment: 8-40mm, length: 1200mm, width: 1160mm, height: 2150mm, weight: 2.5t. Deln Hy Hoht Hdwepecg

Condition: ready for operation (used), Max. pressing force: 30t, stroke speed: 100-600/min, stroke adjustment: 8-40mm, length: 1200mm, width: 1160mm, height: 2150mm, weight: 2.5t. Dcslsht Hdhsn Hy Hpog

Year of construction: 1974, Condition: ready for operation (used), Max. pressing force: 30t, stroke speed: 100-600/min, stroke adjustment: 8-40mm, length: 1200mm, width: 1160mm, height: 2150mm, weight: 2.5t. Delnjht Hdts Hy Hpecg

Year of construction: 2011, Condition: ready for operation (used), Max. workpiece dimensions: 1500x300mm, laser power: 3kW, max. load: 5t, operational hours counter: 5364h, with loading table, suction units for removing the sheets from the loading trolley, configuration ADL30-PMC30-TLE30 155C L5-30ASF, unloading trolley, enclosure, pallet storage rack, workbench, storage table, chip trolley and documentation, an inspection is possible, was maintained regularly. Deln Hyeqzkdbe Hpecg

Year of construction: 1981, Condition: ready for operation (used), Working length: 4000mm, pressing force: 3000kN, distance between the columns: 3550mm, table width: 500mm, installation height: 460mm, connected load: 30kW, weight: 30t, with accessories and documentation. Djln Hekvpgijy Hpscg