Used Nilfisk-Alto Floortec 560 B Obc for sale (9,231)

Condition: ready for operation (used), Isernhäger Model: B 200 P 200 liters Stainless steel construction with casters Colikusv Skggon Degt Connection: 400V, 16A CEE plug Machine completely overhauled, i.e. (All parts and machines checked, system cleaned with dry ice, pumps and drive tested.)

Condition: new, Year of construction: 2025, Suction nozzle diameter: 300mm maximum volume flow: 6000 m³/h nominal volume flow: 5089 m³/h volume flow monitoring: pressure difference display Filter area: 31.8 m² Residual dust content: less than 0.1 mg/m³ Sound pressure level: 70 db Shrew bag volume: 480 l Celijpfat Nokun Dogt Filter cleaning: mororic Engine power: 7,5 kW Extinguishing device: yes Machine length: 3245 mm machine width: 1030 mm Machine height: 2595 mm Weight: 780 kg

Condition: used, mileage: 1,001 km, color: red, driver cabin: other, gearing type: other, Year of construction: 2005, first registration: 01/2005, Equipment: central locking, crane, Vehicle location: Bovenden, crane at the rear, can be uncoupled, emergency stop, grab control, foldable, high stand, 2-point mechanical support, radio remote control, 3x hydraulic extensions Construction: Palfinger PKG 12001 B with uncoupling console, high stand and radio control (remote control) Load diagram: 3.7m-3010kg, 5.1m-2100kg, 7.1m-1470kg, 9.2m-1110kg! ACCESSORIES INFORMATION WITHOUT GUARANTEE, subject to changes, prior sale and errors! - . Cjlikujummulen Degt

Condition: new, Year of construction: 2024, max. cutting height 160 mm max. cutting width 600 mm min./max. trimming width 25-300 mm Adjustment times of the widths 0.2-1.0 sec. Feed rate 5-30 (70) m/min. Saw motor 37 KW Feed motor 2.2 kW Electric height adjustment of the top rollers 2 lasers Splitting wedges in the machine Fixed bush Adjusting bush Cutting width display Automatic width adjustment Saw shaft diameter 70 mm Cgjlikunsvdcc Rj Dst Weight 3.500 kg Available at short notice

Condition: used, Year of construction: 2005, AMMANN dewatering screen, complete in good condition, little rust, Motor: 11 kW Maximum flow rate: 50 m³/h Screening area: 3.6 m² / approx. 1250 x 3000 mm Colikswcavwoun Degt Weight: 2550 kg More pictures available. Inspection possible at any time.

Year of construction: 2008, Condition: good (used), Manufacturer ROMI Model / Machine Type E280 B MY Year of Manufacture 2008 Machine Weight (kg) 6,300 Power Consumption 44 A Operating Voltage 400V / 50 Hz Dimensions (mm) 4,050 x 2,050 x 2,000 Technical Specifications X-Axis Travel 195 mm Y-Axis Travel 50 mm (1-35 mm) Z-Axis Travel 405 mm Max. Turning Length 400 mm Max. Turning Diameter 280 mm Main Spindle Speed 4,000 rpm 6,000 rpm Cgelikuev Nzyfsn Djt 210 mm 12 Positions Main: 64 mm / Counter: 42 mm Equipment and Accessories FANUC 181-TB Control System Measuring Probe High-Pressure Pump 15 bar Collet Chuck Hainbuch Chip conveyor

Condition: good (used), Year of construction: 2016, Functionality: fully functional, Automatic CNC band sawing machine with 500mm carriage stroke Csljrqgrdeikun Degt

Condition: new, Year of construction: 2025, Suction nozzle diameter: 350mm Colijpfat Tjkun Degt maximum volume flow: 8000 m³/h nominal volume flow: 6927 m³/h negative pressure: 2600 Pa at 21,4 m/s in dusty condition Volume flow monitoring: pressure difference display Filter area: 31.8 m² Residual dust content: less than 0.1 mg/m³ Sound pressure level: 72 db Chaff bag volume: 640 l Filter cleaning: mororic Engine power: 11 kW Extinguishing device: yes Machine length: 4165 mm Machine width: 1270 mm Machine height: 2595 mm Weight: 900 kg

Condition: used, mileage: 87,700 km, power: 107 kW (145.48 HP), fuel type: diesel, gearing type: mechanical, overall weight: 3,500 kg, first registration: 08/2019, loading space length: 3,733 mm, emission class: euro6, color: white, number of seats: 3, total length: 6,198 mm, Equipment: ABS, central locking, electronic stability program (ESP), soot filter, Flatbed with tarpaulin & bows Cslikevudzijun Degt Spojkar sleeping cabin Reversing camera Parking heater Optional extras: Airbag driver/passenger side All-weather/all-season tires Exterior mirrors with long retaining arm Electrical interface for bodies, 16-pin Electrical interface for additional conversions Sound-insulating load compartment partition Seats in the cab: Comfort driver's seat Further equipment: Audio system: Radio R 15 BT (AUX-IN, USB connection and Bluetooth), Electrically adjustable and heated exterior mirrors, Single tires on 2nd axle / rear axle, Generator 185 A, Cabin filter: Pollen filter, Body/body: Flatbed, Body variant: Vehicle length L3, Fuel tank: 80 ltr, Steering column (steering wheel) adjustable, Headlight range control, Engine 2.3 ltr. - 107 kW Biturbo CDTI, Wheelbase 3682 mm, Spare wheel with driving tires, Low-emission according to Euro 6 emissions standard, Seats in cab: Double passenger seat, Steel rims 6.5x16, Start/stop system, Gross vehicle weight 3.5 t

Condition: used, overall weight: 36,000 kg, maximum load weight: 29,502 kg, axle configuration: 3 axles, first registration: 02/2019, Equipment: ABS, Color blau, ABS, Scheibenbremse, Liftachse, Ladungssicherung: Aufbau zertifiziert nach EN 12642 XL, mit Getränkezertifikat, durchgehende Zurrlochung im Außenrahmen, ROTOS SCB Laufwerksystem, SCB Luftfeder Typ: MRH-KM30, Planenschnellspanner vorne, Planseil umlaufend mit Halter inkl. Stirnwandseil für T1 Versandverfahren, Cjlikjvy Rkneun Djgt

Condition: good (used), Year of construction: 1998, Used HANDTMANN VF 300 stuffer is a high-performance machine, capable of processing up to 10,000 kg/h. Portioning range from 5 to 100,000 g. The device is operated via an integrated control system. The machine includes an integrated loading system for standard 200L containers. The unit is adapted for operation with a grinding attachment. Filling pressure up to 35 bar. Manufacturer: Handtmann Model: VF300 Height: 2100 mm Width: 1800 mm Cgelikuswcwinen Det Length: 1400 mm Weight: 1400 kg Hopper capacity: 300 L Electrical supply: 400V 50Hz 3N Total power: 16.5 kW

Condition: refurbished (used), The reconditioned vacuum pump is available from stock and ready for immediate use. We recommend installation only by trained personnel. Adaptation materials available upon request. Oil filling: Anderol 555 Technical specifications: 15 kW 380-420V / 660-690V 50 Hz Incl. 2x gas ballasts in A and B covers Cgelijwa Sbtekun Dot Incl. level switch Ultimate pressure with open gas ballast: 1.3 mbar Ultimate pressure with closed gas ballast: 0.1 mbar Subject to prior sale! This offer is only valid for customers in Germany and other European countries!

Condition: new, neu ca. 4 Monate ab Auftragse Türkei 27700 € 562.31 € Doppelsäulenführung 6000x41x1,3 mm 20-100 m/min 560 mm 560 mm 750x560 mm rund 410 mm, quadrat 410 590 mm 1.1 kW 4 kW 0.12 kW 3400 mm 1000 mm 2050 mm 2045 kg 2° inclined band linear guides control panel material limit shaft coolant pump 1200 mm roller table hydraulic vice hydromechanic band tensioning inverter presser adjustment band brush optical height adjustment security switch Celikunsvvnite Djgt operating manual in Englisch OPTION: turn table for mitre cuts hydraulic top clamping from above micro cooling unit laser cutting line

Condition: good (used), Year of construction: 2009, Bürck + Lang underfloor saw with automatic feed, profile clamping device, lateral adjustment options for the cutting width, fully functional Celikjwb H T Tsun Degt

Condition: used, mileage: 49,200 km, power: 290 kW (394.29 HP), first registration: 01/2023, overall weight: 32,000 kg, fuel type: diesel, color: white, axle configuration: > 3 axles, next inspection (TÜV): 06/2025, gearing type: automatic, emission class: euro6, loading space volume: 9 m³, Equipment: ABS, air conditioning, electronic stability program (ESP), parking heater, * MB mixer from Germany * Stetter AM 9 FHCLL * Expanding agent tank * 500 L water tank * Wheelbase 4250 mm * Medium-length cab * Air conditioning Cgslikowb Ndneun Dst * Auxiliary hot water heater * Seat heating * Electric Windows and Mirrors * Air-suspended driver's seat * Rear window in the cab * Rotating beacon * Sun visor * Multifunction steering wheel * Rear differential lock * Leaf spring suspension * Disc brakes * Tires 315/80R22.5 * Night light switch * Residual heat utilization * Side sunblind * Construction site filter * ABS deactivatable * Tinted windshield * Off-road drive mode * 320L diesel tank * High-performance engine brakes * LED taillights * Aluminum compressed air tank * Daytime running lights * Air horn * MB Power Shift transmission * Actros 5 Multimedia Cockpit * Central locking system * Reverse alarm * Production at the Wörth plant * and much more * !!! Errors, changes, and prior sale reserved!!!

Condition: used, overall weight: 36,000 kg, maximum load weight: 29,230 kg, axle configuration: 3 axles, first registration: 11/2021, Equipment: ABS, ABS, EBS, Schiebeplane, Edschaverdeck, Liftachse, Scheibenbremse, Color weiß Cjliovy Rl Sjkun Dsgt

Condition: not inspected (used), Year of construction: 2014, product height (max.): 300 mm, product width (max.): 300 mm, working height: 300 mm, film width: 600 mm, Shrink film packaging machine / film shrinking machine Manufactured by Shanghai Jinglin Packaging Machinery Type JL 2300 B Year of manufacture 2014 CE mark Shrink film packaging machine for packaging profile strips, KVH, glulam, parquet, and much more. by means of film wrapping and forming shoulders (flow pack process) Consisting of: - Infeed conveyor belt - Film wrapping and end sealing station - Outfeed conveyor belt / transfer conveyor belt - Shrink tunnel, heating temperature adjustable, approx. 100 - 220°C Working width approx. 300 mm Maximum opening height approx. 300 mm Maximum film width approx. 600 mm Cgolikuewbfxhon Djt Conveyor belt width approx. 380 mm Film sealing via sealing bar Side pressure rollers Infinitely variable feed rate Control via control panel / touchpad Including various forming shoulders, if available. Total connected load: 25 kW Compressed air: 6-8 bar Installation length approx. 9 m Installation width approx. 1.3 m Weight approx. 1500 kg

Condition: good (used), Functionality: fully functional, Used L + Z lathe with 3-axis digital readout Manufacturer: WEILER Type: Condor 81 B Machine. No.: 87596 Year of manufacture: approx. 1987 Center distance: 750 mm Turning diameter over bed: Ø 330 mm Center height above bed: 165 mm Turning diameter over support: Ø 180 mm Center height above support: 90 mm Spindle bore: Ø 40 mm Tailstock inner taper: MK 3 Pinol adjustment: 110 mm Spindle speed: 45 - 2800 rpm. (16 steps + 2 motor speeds) Feed range: 0.016 - 0.50 mm/rev Drive power: 1.6 + 3.2 kW (drive motor stage 1+2) Mains connection: 400 Volt, 50 Hz Celiovadqzekun Degt Connected load: 32 kW Control voltage: 42 Volt Equipment + accessories: - 3-axis digital readout from Heidenhain type VRZ 750 - Quick clamping device and various collets + draw tube - 3-jaw power chuck Ø 160 mm Forkardt F160 - Multifix size B quick-change steel holder - LED work light - Bed stop - Automatic longitudinal & face feeds - Electro-mechanical spindle brake switchable - 2x emergency stop - Electrical feed key query (via sleeve with button) - Coolant tank with pump in the machine base - Folding chuck guard - Splash guard - Circuit diagram - Adjustable machine feet Space requirement: 1850 x 950 x 1400 mm (L x W x H) Weight: approx. 1100 kg This new generation of Weiler lathes is very user-friendly and robust. Machine can be demonstrated on site under power. All information without guarantee. Subject to prior sale.

Condition: used, Felder MG 560 Edge thickness 0.4 - 5 mm Control panel with LCD display and keypad Pre-trimming unit for joining before the gluing section Automatic edge magazine for roll materials - 3 mm Strip edge banding with individual feed Teflon-coated glue pot for EVA + PUR hot melt adhesive granules Short heat-up time Workpiece height 8 - 60 mm Finely adjustable glue roller Cgslijvy T Nyekun Dot Gun shear up to 64 mm material height for pre-trimming roll materials Printing unit Trimming unit for roll and strip materials, 45° working angle and 0°/20° bevel trimming Flush radius and bevel trimming Radius scraper Surface scraper Year of manufacture 2009 Machine is FUNCTIONALLY TESTED and in VERY GOOD CONDITION Ex works

Condition: used, measuring range: 64-80°Fswimming pieces: 5 Stückmaterials: glas, alcohol, stainless steel60.000pcs available Cjlikunsdc A Rzs Dogt

Condition: good (used), Year of construction: 1999, operating hours: 12,000 h, travel distance X-axis: 1,050 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 510 mm, Machine details Stock no. 1105-03741 Type of machine milling machining centers - vertical Make KONDIA Type B 1050 Year of manufacture 1999 Type of control CNC Storage location HAGUENAU Country of origin Spain Delivery time IMMEDIATELY Cgoljvlwk Ejikun Djt Freight basis EX WORK Technical details travel -x axis 1000 mm travel -y axis 600 mm travel -z axis 520 mm Additional information WITH HEIDENHAIN TNC 410 CA COOLING TROUGHT THE SPINDLE

Condition: used, Single-column eccentric press HELMERDING Type TPEP 12 B Mach. No. 831-101, Order No. 76228, Year of manufacture 1976 Pressing force 12 tons Thrust 155 mm Table surface 400 x 320 mm Table opening Ø 125 mm Ram surface 125 x 100 mm Stroke adjustment 6-60 mm Cgslikunov N N Hms Djt Ram adjustment range 40 mm Clamping pin bore Ø 25 mm with clamping piece Max. installation height 250 mm Stroke rate 180 strokes/min. Drive power 1.1 kW - Electric foot switch and two-hand operation - Set-up, single-stroke two-hand operation, single-stroke foot operation and continuous operation with foot operation, automatic continuous operation - Emergency stop - Pneumatic clutch-brake combination with auxiliary brake ORTLINGHAUS - Electrical cabinet adjacent L x W x H: 600 x 430 x 1000 mm - UVV 11.062 VGB 7.n.5.2 (for manual insertion work) - Operating instructions with electrical diagram Space requirement L x W x H 1250 x 800 x 1800 mm Weight 800 kg Good condition

Condition: used, Year of construction: 2019, Subject to our "General Terms and Conditions" without any warranty or guarantee, we are pleased to offer you the following vehicle today, subject to change without notice and subject to errors, typos, and prior sale: Krone Reserve B 1000 CV rear-mounted mower Production 2019 ID No.: 1019548 Approx. 11,000 ha Working width 10 m Hydraulic adjustable working width Extension panels + lighting PTO connection Belt delivery on the rear passenger side Hydraulic folding for cutter bar and conveyor belt Cgjlikowbbzloun Dot Krone Collect conveyor belts CCI 100 with computer No load sensing 2 x DA Conditioner Width spreader High position Price: €25,000.00 (net) All information is provided without any warranty or guarantee. Our "General Terms and Conditions" apply. The place of jurisdiction for both parties for disputes with a value up to €5,000.00 is the Ludwigslust District Court; for disputes exceeding this amount, the Schwerin Regional Court is the place of jurisdiction. Errors, typos, and prior sale excepted.

Condition: like new (used), Year of construction: 1995, machine/vehicle number: 10262342, Automated high pressure die casting machine Bühler. 9800 kN clamping force. Machine is DISMANTLED Cgslikefbl Ensun Dst

Condition: new, Year of construction: 2021, Exhibition machine Year of manufacture 2021 (table machine) For stationary form milling of head edges on soft and postforming workpieces. As well as for Eraser milling on thick PVC edges on rectangular workpieces and multi-sided gluing. The machining of symmetrical and asymmetrical soft- and postforming profiles is possible after manual profile depth adjustment. Motor guidance is manual by scanning on the workpiece. Basic equipment: Celikuokwhapen Degt - Workpiece stop system - pneumatic clamping cylinder - 1 milling motor 0,8 kW infinitely variable up to 27000 rpm standard with radius milling cutter R=3 equipped. The scanning is done by a starting ring on the workpiece. - Aggregate guidance on precision round guides. Technical data: Workpiece thickness: max. 55 mm Workpiece width: min. 80 mm Workpiece length: min. 110 mm Softforming profile depth: max. 50 mm Edge thickness: max. 4 mm (depending on edge material) Milling tool: Radius milling cutter R 3 Electrical connection: 230V / 50Hz / 1Ph total connection: 0,8 kW pneumatic connection: 6 bar space requirement: approx. 740 x 460 x 500 mm net weight: approx. 45 kg Availability: short term Storage location: Solingen