Used Icm Et 65 for sale (106,816)

Condition: used, machine/vehicle number: 13072, Rotor diameter: 600 mm Rotor width: 650 mm Rotor blade rows: 8 Stator blade rows: 3 Cjlswbwu Ujircvrorb Inlet cross-section approx. 650x600 mm Drive motor: 75 kW

Condition: excellent (used), Year of construction: 2004, Index ABC65 Year of manufacture: 2004 Control: Siemens (840D) C200-4D MAIN SPINDLE - Spindle drive power: 29 [kW] - Spindle speed: 6000 [rpm] - Max. bar diameter: 60 [mm] Minimum C-axis resolution: 0.001 [degrees] Celjwgch Rjircvrjrb SYNCHRONE SPINDLE - Spindle drive power: 4.2 [kW] - Spindle speed: 4500 [rpm] - Minimum C-axis resolution: 7.5 [degrees] Travel range: 280 [mm] BACK DRILLING STATION - Number of positions: 5, including 2 with drive Tool type: VDI25 TURRET 1 - Number of positions: 8 - Number of motorized positions: 8 - Travel range X/Z: 90/280 [mm] - Tool type: VDI25 - Driven tool speed: 4500 [rpm] - Driven tool power: 4.2 [kW] TURRET 2 - Number of positions: 6 - Travel X/Z: 81/80 [mm] - Driven tool speed: 4500 [rpm] - Driven tool power: 4.2 [kW] ELECTRICAL SUPPLY - Supply voltage: 400 [V] Accessories: FMB Turbo bar feeder Various material channels Chip conveyor Coolant tank High-pressure pump 5 back-bore stations (without drive) Main spindle with Hainbuch 65 mm chuck Syncro spindle with Hainbuch 42 mm chuck Tool package: Basic equipment on Haltern     The machine is powered and in production.

Condition: ready for operation (used), Year of construction: 2018, Control Unit Model TNC640 Brand HEIDENHAIN Main Drive Spindle speed range 18000 Tool taper HSK-63 A Number of axis 5 Movement X-Axis Movement 400 mm Creliewbaudercvreb Y-Axis Movement 350 mm Z-Axis Movement 350 mm C-Axis Movement 360º This WEMAS VZG 65-5A Vertical Machining center was manufactured in the year 2018 in Germany. It is equipped with a HEIDENHAIN TNC640 control unit and has 5 axis. The machine has a spindle speed of 18000 rpm. Application Types Milling

Condition: used, Year of construction: 2008, Functionality: fully functional, machine/vehicle number: AH0411, turning length: 700 mm, turning diameter: 310 mm, spindle motor power: 16,500 W, spindle speed (max.): 4,500 rpm, travel distance X-axis: 230 mm, travel distance Z-axis: 740 mm, rapid traverse X-axis: 15 m/min, rapid traverse Z-axis: 24 m/min, total height: 1,800 mm, total length: 3,700 mm, total width: 2,200 mm, quill stroke: 120 mm, quill diameter: 80 mm, overall weight: 4,200 kg, Equipment: documentation/manual, Turning diameter 310 mm Turning length 700 mm Control Siemens Sinumerik 810 DE Turning diameter over bed 425 mm Main spindle Speed range - main spindle MAX 4,500 min/-1 Drive power - main spindle 16.5 kW Max. torque 280 Nm C-axis 360 ° Chuck diameter 210-52 mm Clamping cylinder 65 mm Bar passage max. 65 / (52) mm Spindle nose A8 DIN 55026 Travel paths: x-axis 230 mm Crolircjv Df Iievrjb z-axis 740 mm Rapid traverse X-axis 15 m/min Rapid traverse Z-axis 24 m/min Tool turret: Tool positions in the turret 12 pos. driven stations 12 pos. Tool holder VDI 30 DIN 69880 Speed range of driven tools 6,000 min -1 Drive power - driven tools 3.7 kW Max. torque 9.5 Nm Tailstock Quill diameter MK 4 80 mm Quill stroke 120 mm Tailstock displacement 475 mm Clamping force 500 daN Machine weight approx. 4.2 t Space requirement approx. 3.7 x 2.2 x 1.8 m Documentation Chip conveyor Tailstock C-axis Hydraulic unit Coolant device Tool calibration Three-jaw chuck SMW Autoblock BHD 250

Condition: ready for operation (used), Year of construction: 2005, Krauss Maffei KM 65-180 CX injection molding machine Year of manufacture: 2005 Fully hydraulic closing system. MC 4 control system with color monitor, integrated control panel and built-in diskette drive. Plasticizing system Screw diameter: 30 mm Cslircvowgam Djrorb Nozzle radius: 12 mm Nozzle opening diameter: 4 mm TECHNICAL DATA (standard version) Closing unit Mould closing force: 650 kN Mould opening force: 55 kN Clamping plate dimensions (W x H): 670 x 670 mm Clearance between columns (W x H): 420 x 420 mm Mould opening stroke: 500 mm Min. mould height: 250 mm Maximum opening width: 750 mm Ejector stroke: 150 mm Ejector force (forwards / backwards): 23 / 10 kN Injection unit Screw diameter: 30 mm Length to diameter (L/D): 23.3 Injection pressure: 2025 bar Injection volume: 38.5 cm³ Injection weight (for PS): 77 g Injection efficiency: 106 cm³/s Screw speed (standard): 477 rpm Plasticization efficiency: 16 g/s Electric-hydraulic equipment Pump motor power: 15 kW Installed heater power: 8 kW Number of cylinder heating zones: 5 Dry cycle time (Euromap 6): 1.6 s / 294 mm Oil tank capacity: 280 l Dimensions and weight Net weight (with control cabinet): 3.5 t Machine dimensions (L x W x H): x W x H): 3.98 x 1.48 x 2.02 m

Condition: used, mileage: 41,302 km, power: 152 kW (206.66 HP), fuel type: diesel, gearing type: automatic, first registration: 08/2023, next inspection (TÜV): 07/2025, color: white, brakes: retarder, number of seats: 24, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, Green environmental sticker, Euro VI engine, automatic transmission, ABS, ASR, raising and lowering system, central locking, Telma retarder, cruise control, digital tachograph, air conditioning, Webasto auxiliary heating, loudspeakers, microphone, refrigerator, stereo system with radio, USB port, number of seats: 22 + 1 + 1, reclining and sideways adjustable sleeping seats, jet ventilation, reading lights, luggage nets, roof rack, double glazing, curtains, driver's door, 1 electric door on the right, double rear door, ski basket holder, seat belts, 1 roof hatch, trunk, electrically adjustable exterior mirrors, vehicle may be covered with advertising and/or lettering. Cslirewad U Secvrorb Our offer generally does not include a new TÜV inspection. If a new TÜV inspection is desired, we would be happy to provide you with an offer from our partner workshops! The vehicle may be covered with advertising and/or lettering. Our general terms and conditions of delivery and payment apply. We would be happy to provide you with a financing or leasing offer for this property. Please contact us!

Condition: good (used), Year of construction: 2006, machine/vehicle number: 04050906032, Offer 20234 Technical data approx.: - Filling capacity approx. 200 L - Granulate feed via suction device - Drive power 6200 watts - Temperature controller - Compressed air connection 6 - 8 bar Celircjv In Rbsvrsrb - Mobile version - Space requirement W 1050 x H 2350 x D 700 mm - Weight approx. 180 kg

Condition: new, Year of construction: 2024, Functionality: fully functional, SIEMENS 840DE control system with 24" touch panel X = 275 mm, Z = 700 mm, Y = +50 / -40 mm Colijudapijrcvrjrb Motor spindle up to 4,000 rpm with 65 mm through-bore 16-station BMT45 driven tools CNC tailstock Chip conveyor Glass scale on the X-axis High-pressure pump 15 bar SCHUNK spindle package NCE 260-81 BMT45 tool holder package (rotating and fixed tools) Packaging Free truck loading with crane

Condition: ready for operation (used), Year of construction: 2014, operating hours: 1,520 h, General Data Measurements width 1200 mm Measurements depth 1050 mm Measurements height 2000 mm Control Unit Model CELOS (SIEMENS 840D sl) Interface 21.5“ ERGOline Control CNC main language German (English, Italian) CNC language customizable Yes Main Drive Spindle speed range 14000 1/min Spindle motor power 14 kW (100% ED) Tool taper HSK64 Laser power 2.5 Number of axis 5 Movement X-Axis Movement 650 mm Y-Axis Movement 650 mm Z-Axis Movement 560 mm Table Outer length 800 mm Outer width 650 mm Tools Slots in storage 60 Type of tool holder HSK64 Media Oil water separator Yes Chip conveyor Yes Internal cooling Yes Additional Equipment Inner cooling system 40 bar, 23 l/min Scraper belt chip conveyor with coolant system 600 liters, paper belt filter Infrared measuring probe Renishaw OMP 60 Version for SK 40 (the probe is automatically inserted into the work spindle from the tool magazine) Rinsing gun with pump 2 bar/40 l/min Oil/emulsion mist separator Tool measurement in the Blum Laser work area MPC Machine Protection Control & 3D quickSET Surcharge for powder feeder Twin System Cjlijwchvlorcvrerb Suction unit with secondary filter stage electronic handwheel Siemens 840D This DMG MORI LASERTEC 65 3D Hybrid 5-axis precision machine for milling and laser machining was manufactured in the year 2014 in Germany. It is special for the ability to produce components using 3D Printing and to post-process them at the same time. Ideal for manufacturers who need a high-performance additive manufacturing solution of metallic 3D components. The machine features a fixed integration of the laser head in the headstock for greater installation space and more performance. In addition it offers 5-axis material application via coaxial nozzle for uniform powder distribution regardless of the laser build-up direction. It is the ideal dedicated solution for prototypes, small series, repair and coating. This LASERTEC 65 3D is equipped with an integrated SK 40 motor spindle with spindle speed up to 14,000 1/min. In addition it operates with a fiber-guided diode laser of 2.5 kW laser power. Next to internal coolant supply (IKZ) it comes with Renishaw measuring probe and Blum tool measurement option. Furthermore it is appreciated for its generously sized work area that is easily accessible, along with travel dimensions of 650 × 650 × 560 mm (X / Y / Z). It is a supremely adaptable 5-axis machine suitable for a wide array of laser and milling tasks, delivering consistently high-quality results without compromise. Application Types Milling

Condition: used, mileage: 241,200 km, first registration: 06/2013, Year of construction: 2013, "IVECO DAILY 60/65 C15 Year 2013 Euro 5 B Km.241,200 PTT 60/65 q. C LICENSE Crolircvei Dqwrorjb Wheelbase mm 3,750 A FRAME

Condition: new, mileage: 500 km, power: 70 kW (95.17 HP), fuel type: electric, overall weight: 4,250 kg, loading space length: 3,400 mm, loading space width: 2,080 mm, loading space height: 1,570 mm, loading space volume: 15 m³, color: white, number of seats: 3, Year of construction: 2023, total length: 6,040 mm, total width: 2,200 mm, total height: 2,780 mm, * CityRollup superstructure * All-aluminum body with Segemental roller doors * 2 compartments à 2,057 mm + 2 compartments à 1,320 mm * Dekra certified according to VDI 2700 ff and DIN EN 12642 XL * Range approx. 200 km * Lithium iron phosphate battery * Battery capacity 80 kWh 400 V * Leaf spring ORTEN Electric-Trucks E 35 with roller shutter body: Pricing taking into account the subsidies Technical data chassis: Manufacturer: ORTEN Vehicle class: N2 GVW: 4,250 kg (driving license class B) Unladen weight: 2,295 kg Wheelbase: 3,745 mm Tires: 185/75 R 16C Equipment: Seats 1+2 * Gear ratio rear axle i = 4.1 * Stabilizer rear axle * Front disc brakes * Rear drum brakes * Airbag driver * Fog lights * Heat-insulating glass * Luxury driver's seat * Central locking * Electrically adjustable exterior mirrors * Storage compartments left and right front doors * Multimedia 2DIN with USB connection Cjlirjqz R Dmscvrjrb * Hands-free system * ABS * Summer tires * Spare wheel, supplied loose * Wheel chock with bracket (vehicle class N2) * Cab color similar to signal white RAL 9003 * Chassis color graphite black * Wheel rims color silver * Warning triangle * First aid kit * Hazard warning lights * Operating instructions Technical data of the conversion: * Maximum speed: 85km/h * Range: approx. 200km * Battery: Lithium iron phosphate (LFP) Nickel and cobalt free * Battery capacity: 80kWh, 400V / DC * Charging plug: Type 2 Mode 3 / AC / IEC 62196 * Charging time: approx. 3.5 hours at 400 Volt / 22kW AC * Electric motor: Synchronous electric motor, water-cooled * Motor power: 70kW / Peak 92 kW * Torque: 410Nm / Peak 730Nm Technical equipment: Regenerative braking power * 22kW On Board Charger AC * DC/DC on-board power converter * Electric power steering assistance * BMS- CAN-BUS-controlled charging technology * Electric 5kW HV cab heater * Color display, shows all relevant battery, BMS, engine and control data * Diagnostic menu for engine control and BMS integrated in the information display * Diagnostic menu for battery cell monitoring integrated in the information display * Stainless steel construction elements * HV 400 Volt / DC battery heating system (only in charging mode) * Vehicle approval § 13 EG-FGV / ECE R100 ORTEN City Rollup body Assembly dimensions: Total length: approx. 3,600 mm Floor inclination: 0 mm Total height: approx. 2,360 mm Width of the bay: front 2057 / rear 1320 mm Total width: approx. 2,200 mm Height of the bay: 1575 mm Aluminum roller doors: Roll-up with spring support. Rubber band for pulling down the roller doors. In the closed position, the doors are secured centrally by a locking handle, which is mounted on both sides of the front wall and can be locked with a padlock. Pallet stop: Pallet stop approx. 20 mm on the outer edge of each bay, welded to prevent goods from sliding against the door Underride guard: Original chassis underride guard is used Rear wall: Fixed rear wall. Double-walled with aluminum planking with smooth surface. Paintwork: Body painted on the outside in RAL ? color. Lettering can be applied as specified at an extra charge Side steps: The side underride guard is formed by steps with an anti-slip surface for the driver. Steps along the bodywork on both sides of the vehicle, between the axles and behind the rear

Condition: used, Functionality: fully functional, Year of construction: 2024, construction height: 2,810 mm, fuel type: diesel, total length: 9,760 mm, drive type: Diesel, load capacity: 454 kg, construction width: 2,490 mm, net weight: 11,412 kg, working height: 21,810 mm, Telescopic work platform Cjlirstrbtkjcvrorb Technical condition: New

Condition: good (used), Year of construction: 2004, Emco ET 420 / double spindle lathe, Year of manufacture 2004, Siemens control, max. bar capacity 26 mm, max. part length 600 mm, 2 main spindles, 2 counter spindles, double bar loading magazine, main spindle up to 5,000 rpm, C axis 0.01° , Revolver 2 x 12-fold VDI 16, 4 driven tool stations / turret, chip conveyor, coolant device, parts catcher long parts ( self-made ) Cslircvsr Izbyjrjrb

Condition: used, mileage: 492,567 km, power: 368 kW (500.34 HP), first registration: 02/2019, fuel type: diesel, number of seats: 65, gearing type: automatic, emission class: euro6, color: white, brakes: retarder, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, sleeping cabin, Engine: MAN AdBlue Emissions standard: EURO6 Total seating capacity: 65 Seats: 63 + 1 + 1 sleeping seats with lap belts Transmission: Automatic Safety * Retarder * Cruise control * Adaptive cruise control * ABS ASR ESP EBS * Fog lights * Immobilizer * Xenon headlights * Brake assist * Lane departure warning * Rear view camera * Multifunction steering wheel Passenger compartment * Auxiliary heating * Wood flooring * Air conditioning * Tables * Curtains * Luggage racks * Jet ventilation * Reading lights * Double glazing * Footrests * Refrigerator * Leather headrest inserts * Tour guide microphone * Driver microphone Audio, communication, electronics * Navigation system * Radio * USB port on the multimedia system * Video / DVD Exterior * Trailer hitch ready * Lifting/lowering system * Power steering * Tachograph Map * Sun visor * Sleeping cabin prepared * Electric exterior mirrors * Ski case eyelets * Central locking * Roof hatches, roof vents, roof vents Other * Twin tires * Vehicle length: 13.90 m * Vehicle width: 2.55 m * Vehicle height: 3.85 m * Hubcaps * Tires: front approx. 50% * Tires: rear approx. 50% Our internal vehicle number: 11445 Crelirswauxuocvrsb Errors excepted. Images and text may differ from the vehicle. Over 300 vehicles are always available.

Condition: ready for operation (used), Functionality: fully functional, turning length: 800 mm, turning diameter over cross slide: 266 mm, travel distance Z-axis: 787 mm, rotational speed (max.): 4,500 rpm, chuck outer diameter: 254 mm, overall weight: 4,300 kg, Hardinge Cobra 65 Control Fanuc 21T Chuck 10” Turning Length 787 mm Turning Ø 266 mm Ø above the bed 558 mm Length between centres 800 mm Turret 12station VDI Speed 4500 rpm Spindle Motor 7Kw Length x width x height 3100 x 1800 x 1850 Weight 4300 kg Cslircvowbd Iuororb

Condition: excellent (used), Year of construction: 2002, Functionality: fully functional, DECKEL MAHO DMC 65 V CNC milling machine + tool setter + workpiece setter TECHNICAL DATA: Year of manufacture: 2002 X 650 mm Y 500 mm Z 500 mm Table clamping area: 850 x 600 mm HEIDENHAIN iTNC 530 control Number of tool positions: 30 Max. speed: 18,000 rpm SK40 Tool setter Workpiece setter Operating manual Celircowfrcuevrerb Space requirement: approx. 2.45 x 3.2 x 2.7 m Machine weight: approx. 10,500 kg We estimate that the machine is in very good condition and can be inspected under power by appointment. Loading included. We will assist you with the organization of transport.

Condition: used, Year of construction: 2001, Transnorm curved belt conveyor left 65°-780-600 RA1827 Make: Transnorm Running direction: 65° left running Cjlirok Abgrscvrorb belt conveyor width (RB): 600 mm Nominal/outer width (NB): 780 mm Inner radius (IR): 600 mm V 220/380 Conveying speed: 0,78m/s Height frame: 210 Scope of delivery: without supports (please enquire if required) For individual, expert advice, simply get in touch with us. Simply contact us by phone or email. We will be happy to help you plan and implement your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: reconditioned (used), complete plastification unit for DEMAG 2.300 unit with 80 mm screw and barrel Cjlircsfwcttjvrsrb

Condition: new, Year of construction: 2024, operating hours: 25 h, machine/vehicle number: AT1395, SPINNER TC600 with travel X=275mm Z=700mm in 45-degree inclined bed design with hardened and ground slideways equipped as a SINGLE-SPINDLE TURNING MACHINE with turret WITH driven tools WITH Y-axis indexing turret - WITH driven tool stations all tool stations can be driven, servo turret Swivel speed adjustable Tool holder on turret system BMT45 Number of tool stations in the turret : 16 SPINDEL 1 in version up to 4,000 rpm - 65mm As integrated motor spindle, with water cooling with hydraulic hollow clamping cylinder, bar capacity 65mm, speed range 0-4,000 rpm , Pmax 34 kW / 325Nm POWER CHUCK make SMW-Autoblok D=250mm 3-jaw, model BHD Crelisri I H Iorcvrob Set of soft jaws, set of hardened UPPER JAWS FOOT SWITCH CNC-REITSTOCK with integrated bearing as CNC axis movable in axis to main spindle. Programmable contact pressure. FOOT SWITCH for moving the tailstock quill in insertion mode DIRECT MEASURING SYSTEM in X-axis CONTROL FANUC 32iTB with the following basic functions: - Contouring control with Fanuc standard user interface - 15" LCD flat color screen Fanuc control panel, full-key - User memory 256 KByte, max. 64 program numbers - USB interface for loading/saving CNC programs - Ethernet interface - GE Fanuc "turning" cycles for threading, deep drilling, parting off, grooving, - Contour train programming, cutting edge radius compensation, chamfering and corner rounding - Zero offsets G54-59, 64 tool compensation pairs, V-constant - Thread cutting without compensation chuck for central threads in the spindle center and for driven tools. - In the case of the C axis: Polar coordinates and cylinder interpolation - Parallel programming in the background - Dialog interface for simple cycle assignment and contour programming incl. Line graphics - Inch-metric changeover - Electronic handwheel integrated in the control panel - Dialog language for control trilingual German/English/French FIRST LANGUAGE CNC dialog: German DIALOG PROGRAMMING Fanuc Manual-Guide i SIGNAL LAMP at the top of the machine in three colors red/yellow/green as status display LATE CONVEYOR as hinged belt conveyor exiting to the right, incl. integrated coolant tank and feed pump OIL SKIMMER integrated in coolant system Flushing gun MESSTASTER for tool measurement in the work area STANDARD DOCUMENTATION GERMAN consisting of machine manual and CNC manuals supplied in digital form on the control unit. STANDARD PAINTING two-colored in light grey RAL7035 and blue grey RAL5008 Electrical version EUROPA-STANDARD as follows: Operating voltage 3x400V +/-10% Mains frequency 50Hz (+/-2%) TN mains (5-wire) Remarks: The price includes warranty services only within Germany. For new and demo machines, the pictures are not necessarily the pictures of the individual machine but of comparison machines The accessories shown, such as clamping devices or tool holders, are only included in the scope of delivery to the extent listed in the technical description. Ask for a detailed offer ex works. Visit our factory near Munich or one of our showrooms. GGF we have other offers of comparable machines. We expressly reserve the right to prior sale.

Condition: new, Year of construction: 2024, mast type: telescopic, fuel type: diesel, color: blue, General information Field of application: Construction Drivetrain Drive: Track Weights Empty weight: 13.098 kg Functional Lifting capacity: 300 kg Working height: 2.190 cm Condition General condition: very good Technical condition: very good Visual appearance: very good Other information Delivery terms: EXW Max. horizontal reach: 1550 m Max swing of arm in degrees: 360 Transport dimensions (LxWxH): 9,76x2,48x2,87 Additional information Please contact Christian Theißen for more information Manufacturer: Genie Model: S 65 Trax Year of build: 2024 Condition: New Data: Crelircov Tiktjvrjb Max. working height: 21,86 m Max. platform height: 19,86 m Max. reach: 16,51 m Drive type: Diesel Total dimensions LxWxH: 9,76 x 2,48 x 2,87 m Platform dimensions: 1,83 x 0,76 m Max. basket load: 300 kg Swivel range: 360° Max. Pitch angle: 45% Ground clearance: 0,47 m Own weight: 13.098 kg Special features: basket arm /vertical rotation angle 133°, Kettensystem 4-Punkt TraX. Information: delivery time on request

Condition: excellent (used), Year of construction: 2018, Functionality: fully functional, turning diameter: 65 mm, The machine is new and in stock. STANDARD EQUIPMENT Main spindle 15 kW, 3,500 rpm with SINUMERIK 840D control system with 4 cross-slides on the main spindle with an 8-station VDI30x55 servo turret all stations suitable for red machining. Tool holder Central milling drive 3.3 kW, 3000 rpm Including stable polygon turning function (without tool holder) With full C-axis on the left spindle and on the pick-up spindle Including pick-up spindle With workpiece collecting tray and finished part conveyor belt for falling cut-off parts or offcuts With retractable finished part conveyor belt for unloading finished parts after back machining 4 tool holders for the back With programmable high-pressure coolant for clamping device cleaning before the next workpiece transfer With HD-KM pumps, 70 bar With separate coolant tank (180 liters) With handwheel Coolant and hydraulic pumps Bar loader interface Interface for Lico chip conveyor 1 set of slide base holders Automatic lubrication system Cutting force monitoring on all stations Control cabinet with air conditioning unit Triple signal lights The machine is also equipped with a turret Equipped for back machining. This is designed for fixed tools only. BASIC MACHINE EQUIPMENT LICO / FMB bar loader interface Programming document for Lico machines Celircsv N I Hxevrorb Color Door RAL 7015 Slate Gray Chip tray/frame RAL 7024 Graphite Gray Housing RAL 7035 Light Gray

Year of construction: 2006, Condition: refurbished (used), Functionality: fully functional, Starlinger Extruder - Screw diameter: 65 mm - Refurbished - Degassing zones - Filter / screen changer - Strand die Data sheet, see photos. Optionally with water bath & strand pelletizer, etc. Celircvohgq Ahsrorb We are available for any further questions. Commissioning and testing available upon request. In stock

Condition: used, Year of construction: 2004, Machine in very good condition. Crelircvewah Hfereb Hours 11686. 2 axes.

Condition: reconditioned (used), Complete pump set for Demag ET 330 Celirsfwctpocvrsrb

Condition: reconditioned (used), tie-bar-set (4) complete for DEMAG ET 330 Crelircvefwctaereb