Used Gesan Dpr 100 for sale (40,346)

Condition: used, machine/vehicle number: 6634801, Year of construction: 2018, operating hours: 4,730 h, load capacity: 1,000 kg, lifting height: 1,400 mm, free lift: 1,400 mm, mast type: standard, construction height: 1,830 mm, fork length: 1,200 mm, drive type: Elektro, net weight: 850 kg, High lift truck Dsb Houhwt Toa Rckeut Chassis number: 6634801 Mast type: Mono Technical condition: good Battery Volt: 24V Battery Ah: 225Ah Battery year of construction: 2018 Description: BT SWE 100 No.: M0564 Year of construction: 2018 Operating hours: 4,730 The device is visually and technically in good condition. Subject to errors and prior sale. If you have not found your truck, please contact us. We still have a large selection of other devices on site.

Condition: used, Year of construction: 2015, machine/vehicle number: 29156, 27781, 19678, Decoiler Coil weight: 2 x 4,5 ton Material width max.: 520 mm Coil exterior diameter: 1800 mm Expansion range: 460 - 525 mm Leveller / Straightener Dueb Hovg Iqxoa Rckjt Material width : 30 - 500 mm Number of levelling rolls: 11 pcs. Diameter of the levelling rolls: 90 mm Number of pull out rolls: 4 pcs. Diameter of the pull out rolls: 90 mm Material thickness: 0,8 - 5,0 mm Feeding speed: 3 - 30 m / min Roll feeder Material width max.: 30 - 510 mm Material thickness: 0,3 - 4.5 mm Material thickness at max. width: 3,8 mm Material thickness at max. cross section: 430 sq mm Number of feeding rolls: 2 pcs. Diameter of feeder rolls : 100 mm Feeding speed: 130 m / min Required power: 5,5 kW Standard configuration Extended machine accessories Insertion aidLoop bridge

Condition: used, Electric dual screwdriving unit with automatic feed and pneumatic double stroke mounted on handling device, handling system, manipulator for screwdriving technology Screwdriving unit: BÖLLHOFF / BOSCH REXROTH type UVS-100-2-R-E The Böllhoff Uniquick Vario UVS-100-2-R-E double screwdriving unit has a pneumatic double stroke via Festo valves and cylinders. Various monitoring systems are also fitted for complete automation. Screwdriver 1 consists of the following components: Rexroth type servomotor Rexroth type planetary gearbox Rexroth type encoder Rexroth type straight drive Screwdriver 2 consists of the following components: Rexroth type servo motor Rexroth type planetary gear Djb Hasfx Hyfe Rckout Rexroth type Transducer Rexroth type Offset output Dimensions WxHxD: 165 x 1000 x 200 mm Pneumatic long stroke: 30 mm Pneumatic short stroke: 20 mm Screwdriver spring stroke: 20 mm Screws last used: M6 x 15 mm Rexroth electric screwdriver unit Rexroth servo motor Type: EC302 SZ3 Material number: Torque: 0.6 Nm/A Peak torque: 0.7 Nm Speed: max. 20000 rpm Current consumption: max. 7 A Weight: 0.8 kg Rexroth gear unit Type: 3GE27 SZ3 Material no: Efficiency: 90% Reduction ratio: i=18.9 Torque: max. 10 Nm Weight: 0.4 kg Installation length 65.5 mm Transducer Rexroth Type: 2DMC012 SZ2 Material no: Nominal torque: 12 Nm Reduction ratio: 1 Efficiency: 1 Weight: 0.55 kg Installation length: 118.5 mm Rexroth straight drive Type: 2GA82 SZ2 1/4 "SQ Material no: Spring travel: 20 mm Spring force: 16 - 34 N Tool holder: 1/4" square Maximum torque: 10 Nm Reduction ratio: 1 Weight: 0.2 kg Installation length: 90 mm Offset output Rexroth Type: 2VNA82 SZ2 1/4 "SQ Material no: Spring travel: 20 mm Spring force: 16 - 34 N Tool holder: 1/4" square Maximum torque: 10 Nm Reduction ratio: 1 Weight: 0.6 kg Installation length: 153 mm Handling system: JÄGER HANDLING Type: Handy-flex 300 Horizontal movement: 400 mm Vertical movement: 450 mm Load capacity: max. 14 kg Handyflex outreach: 250 to 650 mm Outreach Handyflex swung out: max. 860 mm Rotation radius at full extension: max. 360° Vertical guide column: Ø 30 mm Horizontal guide pillars: Ø 20 mm - Balancer for vertical movement - Adjustable load capacity - Adjustable stop for radius limitation Dimensions L x W x H: approx. 1150 x 650 x 1400 mm total weight: approx. 90 kg good condition Blue steel base plate is not included in the scope of delivery.

Condition: used, TECHNICAL DETAILS - spindle speed:50 - 7 100 [rpm] - 6 spindle feeds:0.03 - 0.4 [mm/r] - spindle stroke:210 [mm] - X axis machining range:850 / 1 000 [mm] - Y axis machining range:465 [mm] - Z axis machining range:750 [mm] - tightening dimension on table:1 570 x 500 [mm] - T slots:7 - distance between the slots:50 [mm] - width slots:12H8 - positioning accuracy:0.01 [mm] - repetition accuracy:0.005 [mm] - parts maxi weight:250 [kg] - driving power:5 [kW] - drilling capacity in steel:30 [mm] - tapping capacity in steel:M 20 - tapping capacity in cast-iron:M 24 EQUIPMENT - CNC HEIDENHAIN TNC 151 control Dueb Ha Rjvxw Azockjt

Year of construction: 2011, Condition: excellent (used), warehouse no.: 503260 type / device: dehumidifying dryer manufacturer: Amboss+Langbein type: Sektionaltrockner H150 year of construction: 2011 The sectional dryers from Amboss+Langbein can be used for energy-saving, stationary and mobile drying. Thanks to the modular system from Amboss+Langbein, the drying system adapts individually to operational requirements and can be implemented in the smallest of spaces. The dryers work with dew point control and energy-saving heat exchangers. Depending on the production requirements, the air throughput is regulated between 140 and 400 m³/h by process control. Each drying boiler has an individual temperature control. A separate scanning of the material to be dried prevents over-drying and insufficient drying Drying due to excessive material removal. Properties: Fully insulated drying container made of V2A stainless steel Sectional multi-boiler system Each dryer boiler individual temperature control Continuous drying Automatic air volume measurement Dujb Ha Rcju Iuzqjket Patented throughput recording and adapted drying Protection against overload and overdrying Dew point controlled (-60 °C tested) Process air control Batch drying Energy-saving heat exchanger Extreme drying of compressed air for electronic component manufacturing

Condition: used, Year of construction: 1983, Technical details: pressure: 100 t no. of strokes: 20-80 Hub/min weight of the machine ca.: 6 t dimensions of the machine ca.: 2,5 x 2,0 x 2,50 m Djb Hjvmnf Aea Rckjut Press Feintool + feeding unit *

Condition: used, usedmake Haffnertype SL 100upright machinedoor supportworkpiece supportpusher hole motorforend motorlubricatormechanical workpiece clampingstorage location 97447 Gerolzhofen, free loaded, unpackedhandover in as-is condition as inspected,without guarantee and warranty Dusbjvxr R Tj Ha Rckst

Condition: ready for operation (used), Brinkmann TC 63/560+100 submersible pump SN:0804010005-68601001 ,used, normal signs of wear, 100% functional, scope of delivery as per photos Dsbour A T Us Ha Rckjut

Condition: used, Radial drilling machine with plate field WEBO type HRH 100 / 3000 Machine. No. 10009555/7 -- 1110185 -- 6046 Year of manufacture 1979 Drilling capacity Ø 100 mm in ST 60 at feed rate 0.5 mm/rev. Nominal throat depth 3000 mm Max. throat depth max. 3100 mm Spindle holder MK 6 Spindle speed 22.4 - 1600 rpm 36 steps Feed rate 0.05 - 2.5 mm/rev 18 steps Spindle - base plate distance 970 - 2335 mm Pinol stroke 325 mm Swivel range of the arm 360 movable on bed, bed length 7500 mm Clamping area panel field 8000 x 2100 mm - Electrical central clamping Deb Ha Rsfbt Huockjut - Drilling unit can be moved lengthwise on the machine bed by electric motor - Panel field consisting of 2 clamping plates with 7x T-slot, (length 4000 x width 2100 x panel thickness 360 mm) Space requirement L x W x H 8000 x 4550 x 4300 mm Maximum height 4300 mm Transport height (bed with drilling machine) approx. 3150 mm Transport weight (bed with drilling machine) approx. 20 tons Transport dimensions of panel section L x W x H 4000 x 2100 x 900 mm (2 panels stacked on top of each other) Transport weight panel field approx. 14 ton. good condition

Condition: excellent (used), Year of construction: 2004, Clamping force: 25/35 tons Opening stroke: 200 mm Mould height: 150-300 mm Clamping platen daylight: 350-500 mm Tie bar daylight: 221 mm Mould clamping plattens (b x h) : 342 x 250 mm Ejector stroke: 60 mm Screw diameter: 30 mm Screw stroke: 100 mm Injection volume: 70 cm3 Shot weight: 59 g Deb Ha Rcjuykh Dekeut Injection pressure: 1040 bar Working hours: 34.748

Condition: ready for operation (used), Technical characteristics Square mortises, chipped, without lubrication Horizontal front stroke 90 mm Pneumatic feed Tilting head Pneumatic press Aluminium table 1200 mm Ideal machine for furniture and carpentry MortaisageChisel Power and Motors Overall dimensions Dusb Ha Rcjuaiikekjt

Condition: used, pressure 100 t stroke 400 mm daylight longitudinal/sideways 1010 x 300 mm Dusbsvu E Uwo Ha Rckot Motor output 4,0 kW liter capacity 11,0 l dayligth 900 mm table surface area 1010 x 560 mm feed down 6,1 mm/sec feed up 10,0 mm/sec weight of the machine ca. 1,0 t dimensions 1460 x 850 x 2400 mm Manual and motor operation. Side-sliding cylinder.

Condition: used, Pneumatic cylinder SAD-30/100. Deb Helkcg Hea Rckjut

Condition: new, Schmersal MZM 100 ST2-SD2PREM-A solenoid interlock,unused in opened original packaging, 100% functional, scope of delivery according to photos Djb Ha Ropnpntjcksut

Condition: like new (used), Year of construction: 2001, Functionality: fully functional, Manual router. Completely overhauled in the workshop. 1-year warranty on mechanical parts Stroke X : 1100mm Y : 900mm Motor inclination: 0-90 Table rotation: +/- 65°. 4 kW spindle motor Djb Hort R N Uja Rckout

Year of construction: 1996, Condition: used, Manual length adjustment via hand slide For attachment to any Elumatec single-head saw (right) Dob Ha Rcstunbfskjut Max. feed length: 6,000 mm

Condition: ready for operation (used), Technical characteristics Square mortises, without lubrication Horizontal front stroke 90 mm Dsb Ha Rjt Dgb Heckeut Pneumatic feed Tilting head Pneumatic presser Aluminium table 1200 mm Ideal machine for furniture and carpentry Power and Motors Overall dimensions

Condition: new, pressing force: 100 t, cylinder stroke: 400 mm, - Capacity 100 tons - Cylinder stroke 400 mm - Working width 1000 mm - Cylinder is movable Djboq Nz Hmo Ha Rckeut - Pressure gauge - With V-blocks - Emergency stop - Documentation - 400V

Condition: used, Technical specifications: on demand Technical data: on demand engine: 1.5/2.2 kW number of revolutions: 11,350 – 17,400 rpm Throat: 1.000 mm Passage height: about 260 mm Dusb Ha Rcotqmapskot Frequency-controlled copy router Frommia type FS 100 with large projection for fast production of large individual pieces, small series or mass production made of wood or plastic. Workpieces can be guided and copied using negatives and copy pins, or processed with stops.

Condition: new, Functionality: fully functional, power: 18.2 kW (24.75 HP), fuel type: diesel, color: white, operation weight: 1,860 kg, tire condition: 100 %, axle configuration: 4x4, number of seats: 1, Year of construction: 2024, operating hours: 1 h, Equipment: UVV, additional headlights, all wheel drive, cabin, The Bobcat® S100 is the right size and has enough lifting power to work in small spaces. It is a robust solution for all industrial work and is very comfortable for everyday tasks. - Automatically activated glow plugs - Bob-Tach™ frame - Reversing alarm - BICS locking system - Front auxiliary hydraulics - Textile suspension seat - Instruments - Lift arm lock - 27 x 8.50-15, 6-ply, Bobcat Heavy Duty tires - Work lights, front and rear - Deluxe cab - Parking brake - Rear and roof windows - Safety belt - Safety bar - Spark arrester silencer - CE certification - 18.2 kW Kubota diesel engine Warranty: 24 months or 2000 operating hours (whichever comes first) Dusb Het Ecd Hea Rckot This offer is non-binding, no guarantee for equipment details. Errors, changes and prior sale reserved! Dpdc27 Ref. no.: 1

Condition: used, Year of construction: 1995, Max. sheet thickness: 2 mm steel Dsb Hajrrzi Ss Rcksut Roller center distance: 100 mm Largest projection: 400 mm Right and left rotation via foot switch Motor with infinitely variable speed adjustment Machine in original paint Accessories upon request

Condition: used, Haffner SL100 door lock milling machine for simultaneous: - Milling out the lock case with a chain milling machine - Milling out the lock faceplate with a faceplate milling cutter - Drilling out the handle and keyhole with a drill. Duob Heuphnxja Rcket

Condition: new, Functionality: fully functional, power: 18.2 kW (24.75 HP), fuel type: diesel, color: white, overall weight: 1,860 kg, tire condition: 100 %, axle configuration: 4x4, number of seats: 1, Year of construction: 2024, Equipment: UVV, additional headlights, all wheel drive, cabin, The Bobcat® S100 is the right size and has enough lifting power to work in small spaces. It is a robust solution for all industrial work and is very comfortable for everyday tasks. - Automatically activated glow plugs - Bob-Tach™ frame - Reversing alarm - BICS locking system - Front auxiliary hydraulics - Textile suspension seat - Instruments - Lift arm lock - 27 x 8.50-15, 6-ply, Bobcat Heavy Duty tires - Work lights, front and rear - Deluxe cab Dueb Ha Rcet Et Hrskot - Parking brake - Rear and roof windows - Safety belt - Safety bar - Spark arrester silencer - CE certification - 18.2 kW Kubota diesel engine Warranty: 24 months or 2000 operating hours (whichever comes first) This offer is non-binding, no guarantee for equipment details. Errors, changes and prior sale reserved! Ref. no.: 31

Condition: used, Max. punching capacity: 600 kN Max. shearing power: 1000 kN Deb Ha Req D E Tceckeut Punches 20mm holes in 19mm steel Shears on the flat steel shears to 500 mm up to a material thickness of 12 mm steel Further technical data on request With a range of punches and dies as desired

Year of construction: 1975, Condition: used, Mechanical punch with a punching force of 1000kN. Tool holder for stamps up to 90 mm can be mounted on request. A large assortment of punches and matrices is included. Dusb Hsf Nwqasa Rcket