Used Benford Pt 7000 for sale (53,777)

Condition: good (used), workpiece diameter between centers: 2,286 mm, The No. 61 Angular Hypoid Tester is designed to test large bevel and hypoid gears up to 90" diameter and with shaft angles from 0 - 135 degrees. Spur, helical and internal gears can also be accommodated. The drive or pinion spindle can be rotated in either direction at a recommended spindle speed of 600 RPM. It is mounted in a head which is vertically adjustable on a column, so that the spindle can be offset either above or below the center line of the gear spindle for testing hypoid gears. The pinion head column is adjustable angularly in a horizontal plane to permit testing of gears of any shaft angle from 0 - 135 degrees. Specifications: Centerline of Drive Spindle to Nose of Brake Spindle (90 degrees shaft angle and without face plate): 38-1/2" Max. / 7-5/8" Min. Centerline of Brake Spindle to Nose of Drive Spindle (90 degrees shaft angle and without face plate): 60" Max. / 10" Min. Centerline of Brake Spindle to Nose of Drive Spindle Fslq Hertrzdj Tcqsgb (90 degrees shaft angle and with 54" face plate): 60" Max. / 28" Min. Centerline of Brake Spindle to Centerline of Drive Spindle (For Spur Gears): 56" Max. / 6" Min. Distance Between Nose of Brake Spindle and Nose of Drive Spindle (for spur gears): 36-1/2" Max. / 0" Min. Offset of Drive Spindle Either Above or Below Centerline of Brake Spindle: 10" Range of Shaft Angles: 0 - 360 Degrees Maximum Diameter of Gear: 90" Diameter of Face Plate: 54" Outboard Bearing: 3" Diameter Hole Spindles: RPM of Drive Spindle Pulley Set No. 1: 100 - 400 RPM of Drive Spindle Pulley Set No. 2: 250 - 600 Diameter of Taper Hole (large end): 6" Taper Per Foot: 3/4" Depth of Taper: 8" Hole Through Spindle: 5-1/2" Net Weight of Machine: 20,000# Net Weight of Machine W/Outboard Support and Bed Plate: 24,000#

Condition: good (used), Year of construction: 2007, max. wheel diameter 500 mm gear width 200-400 mm module 12 turning speeds 0-3250 U/min bracke pressure bis max. 95 Nm inner taper Konus #39 Control Fanuc 16 Folq Hevr Hf Ej Tcqjgb total power requirement 15 kW weight of the machine ca. 6 t dimensions of the machine ca. 2.350 x 2.240 x 2.500 mm HIGHLY FLEXIBLE TESTING OF HARD, FINISHED AND GREEN SPIRAL BEVEL AND HYPOID GEAR SETS The T 60 bevel gear testing machine is a CNC testing machine with three linear axes for the fully automatic hard and soft testing of spiral bevel and hypoid gear sets with a 90° axis angle. It offers versatile objective and subjective testing options with speeds up to 3,250 min and braking torques up to max. 95 Nm.

Condition: used, Functionality: fully functional, Year of construction: 1972, machine/vehicle number: 619336-KL, load capacity: 14,400 kg, cutting length (max.): 1,150 mm, alignment: Sí, alineado y freno independiente por eje/flecha, paper weight (max.): 900 g/m², paper width (max.): 1,850 mm, number of blades: 3, number of shafts: 12, Equipment: tail-lift, Price to be negotiated, schedule a visit without obligation. HAM-LET Brand Cutting Machine Model 1972 Incorporates a head with blades up to 73" wide to make cuts with adjustable length by means of a gear system and a variable diameter pulley. Includes 4 gears to adjust the measurement from 30cm to 115cm in length. Includes 3 circular blades with a base for additional cross cuts (variable width). The cutting capacity is ~80 cuts/min, it is capable of cutting sheets with a total thickness of 900 grs/m2. The speed of the head is adjustable, to adapt to different production rates. Includes a sheet counter (cut counter). Reinforced Beam Structure Made of high-strength beam/joist (not PTR), capable of mounting up to 12 arrows (axles or bars) for paper rolls with a total weight of 14.4ton. Each arrow has independent brakes and manual alignment, guaranteeing precise unwinding and safe. Conveyor Belt System Composed of adjustable speed belts that lead the cut paper to the elevator, in the stacking area. With alignment mechanism. Elevator with 1 ton capacity Receives and stacks the cut sheets in an orderly manner, with a mechanical aligner. Status and Availability Currently in operation and in perfect working condition. 90% of its components are original or renewed with equivalent or superior parts; 10% corresponds to adaptations that improve performance. Folq Hev Ihiqj Tcqogb Constant maintenance, ready to be installed in the production line. Complete Set for Sale Includes the cutting machine, beam structure, belt system, elevator and sheet counter. Ideal for printing, cardboard and paper cutting in general (bond paper, newspaper, kraft, caple, etc.). SECTION SPECIFICATIONS Cutting Machine Brand and Year Brand and Year - HAM-LET Model 1972 - Serial No.: 619336-KL Feed and Cutting Rolls - Head for up to 73" blade - 3 Blades 73" long × 2" thick, cobalt tipped (rippling) - Rubber Roller: 75" long, with pressure/gap adjustment from cast iron roller - Cast iron roller (New): 75" long - Protective frame to prevent contact with gears, belts and pulleys) Cross Cut - Holder for 3 circular blades (includes 3 bases for mounting) Cutting Length Adjustment - Gear drive to modify the rotation ratio of the Roller with blade - 4 gears included for measurements: ~35cm, ~55cm, ~65cm, ~85cm - Belt system with variable diameter pulley (with “claws”) for precise adjustment of the cutting measurement ±20cm Motor and Controls - 15 HP three-phase motor, up to 1750RPM (semi-new) - Adjustable speed by knob (next to the elevator) - Control panel with power button, emergency stop button - Sheet or cut counter (display next to the elevator) Construction - Cast iron frame, modular and disassemblable design

Condition: new, Year of construction: 2022, Base sheet fiber laser metal cutting machine with full protection Maximum cutting area reaches up to 12000mm*2500mm, suitable for a variety of cutting options. The special fiber laser nozzle and cutting process ensure faster carbon steel oxygen cutting, more gas-saving low-pressure stainless steel nitrogen cutting, and better-quality carbon steel air cutting. Cutting performance and efficiency are improved by maintaining gas flow steady with little turbulence. Fiber laser heads are able to detect jutting obstacles to effectively reduce the damage rate and save the maintenance cost of a laser cutter. The cutting process works even at the edge of thin sheets, and ensures no chatter marks. With One-click Processing, one laser cutter is able to process multiple sheets in batches with a one-off setup, achieving batch processing. Condition: New Laser Type: Fiber Laser Laser Power: 1000W - 40000W Cutting Area: 3048*1524mm - 12500*2600mm Cutting Speed: 0-110m/min Fslqshwhfqo H Tcqegb Positioning accuracy: ±0.05mm Repositioning accuracy: ±0.03mm Graphic Format Supported: AI, BMP, Dst, Dwg, DXF, DXP, LAS, PLT CNC or Not: Yes Cooling Mode: WATER COOLING

Condition: excellent (used), Year of construction: 2000, Functionality: fully functional, machine/vehicle number: 663015, Walter Helitronic Mini Power Production 5 Axis CNC Tool & Cutter Grinder Universal tool and cutter grinder (CNC controlled) Made by Walter, model Helitronic Mini Power Production, s/n663015, year 2000 Description: Suitable to manufacture and regrind metal and woodworking tools of all kinds. Run with 1 micron filtration system, so the machine is very clean. Specifications: • Longitudinal traverse (X-axis) 350 mm, • Vertical traverse (Y-axis) 200 mm, • Cross traverse (Z-axis) 470 mm, • Rotary table swiveling range (C-axis) +/- 200°, • Work head ISO 50, center height (with / without worktable) 145 / 190 mm, • Max. diameter of workpiece 100 mm • Max. length of workpiece 270 mm • Max. dia. of grinding wheel 150 mm • Peak performance 11,5 kW, grinding spindle motor 9kW,speed 0 - 9500 rpm, • Connected load approx. 25 kW (460 volts 3ph / 60 Hz), • Dimensions w x d x h = 2600 x 2550 x 1970 mm, weight approx. 3950 kg, color grey RAL 7035 / grey RAL 7043. Accessories: • Control HMC 500 Windows XP Upgrade • Booster Box Upgrade option along with a spare Booster Box as well that could be used as a backup or for up to 3 other Walter machines. Value of each booster box is $10,000 a piece. • Stepless speed control, probe, pneumatic workpiece clamping • Fire extinguishing system • Mist Extractor • Oil collecting pan, 2 grinding wheel flanges • Complete set of Manuals Software: • Tool Studio Version 2.1 Standard & Steptools • WWM Software Condition: • New Y axis Motor & Ball screw Installed 2021 • New Spindle Installed 2021 • New Electrical cabinet air conditioner Installed 2021 • All new encoder & motor cables for A, C, X, Y & Z axis Installed 2021 • Currently in production producing very accurate & consistent tools. Can be viewed under power Fgsleu Ez Huoq H Tcqeb • We have all of the shipping bracket, so the machine will be safely secured for shipping. • We can load onto a flatdeck for shipping for $900. We can also provide shipping & crating quotes if you would like.

Condition: new, Table size: 420 x 450 mm Table height: 215 mm Fgslq H Tec Snvfscqsb Table swivels up to: 45 Saw or cutting blade Ø: 200 mm here cutting depth: 47 mm electrical connection: alternating current 230 V weight: 14,5 kg

Condition: good (used), Year of construction: 1973, FELLOWS 70-15 GEAR SHAPER - Model 70-15 Fellows heavy duty vertical gear shaping machine , suitable for the manufacture of external straight spur gears up to 70" pitch diameter, as well as internal spur gears and splines within a range of 0" to 88" pitch diameter, regardless of shaper-cutter radius. This unique feature, combined with the machines 15" face-width capacity and 1.7DP cutting capability in steel, provide a formidable platform for producing a wide range of larger geared part members. Equipped with: * Machine Main Base With Work-table, Upper Column, Cutter Ram and Slide of "Super Robust" Construction * Machine with "Saddle Backoff" Method of Cutter Relieving * Cutter Spindle 6.25" diameter w/Standard Straight Spur Guide * Cutter Positioning via Stroke Jog-Button * Rapid Rotation of Work Spindle for Trueing Work-Piece * Rapid Saddle Traverse for Traversing Saddle Relative to Work * Automatic Depth Feed Mechanism for One to Four Cuts, With 4 Speed Motor Providing Speed Change on Finishing Cut Fgslq Hsrtrxio Tcqeb * Assorted Work and Feed Change Gears * Assorted Stroke Change Gears * 2" Riser Plate * Main Drive Motor 15HP, 650/220 rpm, 240 Volt 60Hz w/Westinghouse Rectifier Unit for AC * Power Forced Lubrication to Working Elements with "Lubriquip Lub Controller" * Coolant Tank, Pump, and Piping, With Chip Pan * Full Complement of Electrics * Assorted Guards, Covers * 84" T-Slotted Table * Hydraulic System * Work Lamp * Work Platform * Cutter Adaptor * Manuals Specifications: Max. Diameter External Gear Cut (Nominal): 70" Max. Diameter Internal Gear Cut (Nominal): 88" Max. Diameter Workpiece Accommodated: 104" Worktable Diameter: 84" Max. Permissible Weight of Workpiece & Fixture: 36,000 Lbs. Max. Distance Workspindle Centerline to Centerline of Cutter Spindle: 35" Min. Distance Workspindle Centerline to Centerline of Cutter Spindle: 0" Max. Work & Fixture Clearance Height w/Cutter Spindle in Upper Position: 28" Max. Diametral Pitch (full length teeth): 2 DP Max. Diametral Pitch (stub teeth): .75 DP Max. Diameter Pitch (30P.A. splines): 2-5/5 DP Diameter of Cutter Spindle: 6.25" Max. Stroke Length: 19.118" Max. Face-Width (nominal): 15" Stroking Speeds (infinitely variable): 5 to 122 S.P.M. Max. Infeed of Cutter Ram: .0020 inch/min. Min. Infeed of Cutter Ram: .0005 inch/min. Max. Rotary Feed Per Stroke (per 1" of cutter diameter): .0068"/Min. Min. Rotary Feed Per Stroke (per 1" of cutter diameter): .0006"/Min. Approximate Machine Dimensions: 192"L x 144"W x 150"H Approximate Machine Weight: 95,000 Lbs.

Condition: used, Year of construction: 2009, Functionality: fully functional, machine/vehicle number: 52840-031, type of input current: three-phase, total width: 1,600 mm, total length: 3,500 mm, total height: 2,500 mm, roll diameter: 76 mm, overall weight: 5,200 kg, material width: 305,457 mm, input voltage: 415 V, Elsner AFR-18 Film, Foil and Paper Rewinder for producing of CONSUMER small sized rolls for household Updated- age 2009 with Floor Mounted Gantry/Electric Chain Hoist • Product width 12" and 24" (305 mm and 610 mm) • Cut-off knife with infinite lengths up to 4.75" (120 mm) diameter product The updated Elsner AFR-18 high speed rewinder produces consumer size rolls of aluminum foil, food film, and baking paper at the fastest production speed in the industry. The faster speed offers a substantial cost savings to manufacturers and converters for added profits. The AFR-18 produces 12-inch and 18-inch (305 and 457mm) roll widths at production speeds up to 48 rolls per minute or 3,000 feet (915 m) per minute. Standard machine core OD sizes range from 1.25 to 1.75 inches (32.0 to 44.5) mm). Fjlq Horxvmvs Tcqegb The AFR-18’s multi-purpose turret rewinder is servo controlled and easily adjustable while running. Servo drive technology provides precise monitoring, synchronization and operation of the AFR-18. Cut length is infinitely adjustable from 16 feet to 500 feet (5 to 152 m) with a maximum finished roll diameter of 3-inches (76 mm). Operator controls and settings are easily engaged from an ergonomically designed touch screen featuring a bright, user-friendly display. The PLC provides built in settings for various films and foils and automatically controls the production process. A fault history readout and machine diagnostics are also provided via the display. The AFR-18’s automatic tension control closely monitors the product and interfaces with the variable speed belt-driven unwind to maintain proper web tension. A product delivery conveyor is standard while various roll closure options are available to meet customer requirements such as a food film tail finder that changes the texture of the product at the end of the roll to make it visible to the end user. Also offered is an automatic aluminum foil tape, a label closure, or a hot melt glue closure system. Contact Elsner for your specific requirements today.

Condition: excellent (used), Year of construction: 1997, Bridgeport VMC 500/16 Vertical Machining Centre Year: 1997 Control: Heidenhain TNC 370 Table Area: 830 x 360mm 'X' axis Travel: 500mm 'Y' axis Travel: 340mm 'Z' axis Travel: 525mm Spindle Taper: BT 40 Spindle Speeds: 7000 RPM Fgjlq H Tjwif Rascqsb Toolchanger: 16 station

Condition: new, Year of construction: 2022, All-round sheet fiber laser metal cutting machine Equipped with automatic functions of nozzle changing and one-click processing, P-Series is competent for all cutting demands. Flake graphite in the cutting machine bed improves greatly the shock absorption and wear resistance, and residual stress almost disappears after age hardening, therefore, precision and lifetime of the equipment are improved, and costs saved. The special fiber laser nozzle and cutting process ensure faster carbon steel oxygen cutting, more gas-saving low-pressure stainless steel nitrogen cutting, and better-quality carbon steel air cutting. Fiber laser heads are able to detect jutting obstacles to effectively reduce the damage rate and save the maintenance cost of a laser cutter. The fully closed-loop control adjusts according to feedback to ensure that the actual motion position is consistent with the theoretical input value. With One-click Processing, one laser cutter is able to process multiple sheets in batches with a one-off setup, achieving batch processing. Condition: New Laser Type: Fiber Laser Laser Power: 1500W - 30000W Cutting Area: 3048*1524mm - 6100*2500mm Felq Hehwhf Ae Tcqjgb Cutting Speed: 0-169m/min Positioning accuracy: ±0.03mm - ±0.05mm Repositioning accuracy: ±0.02mm - ±0.03mm Graphic Format Supported: AI, BMP, Dst, Dwg, DXF, DXP, LAS, PLT CNC or Not: Yes Cooling Mode: WATER COOLING

Condition: excellent (used), Year of construction: 2008, Functionality: fully functional, machine/vehicle number: 693068, overall weight: 7,300 kg, power: 30 kW (40.79 HP), Walter Helitronic Vision CNC Tool & Cutter Grinder with Pallet Loader Universal tool and cutter grinder (CNC controlled) Made by Walter, model Helitronic Vision, s/n 693068, year 2008 Description: Suitable to manufacture and regrind metal and woodworking tools of all kinds. Can be viewed under power. Specifications: • Longitudinal movement (X-axis) 480 mm • Y axis vertical movement 320 mm • Z-axis transverse movement 700 mm • Rotary table swivel range C-axis +/- 200 ° • Workpiece Holder ISO 50 • Max. Workpiece diameter 320 mm • Workpiece length circumferential grinding 370 mm • Workpiece length for face machining 320 mm • Accuracy linear resolution 0.0001 mm • Radial resolution 0.0001 ° • Diameter of the spindle 100 mm • Grinding wheel mount: HSK50 • Diameter of the grinding wheel 200 mm • Grinding spindle speed 0 – 12,000 rpm., • Top performance 30 kW • Connected load 35 kW (460 V / 60 Hz) • Weight approx. 7,100 kg • Dimensions L x W x H 3649 x 2490 x 2301 mm Fgelq H Tcouqzdpoqjb Accessories: • Does not include wheel opening stick fixture seen in the pictures • Stepless speed control, probe, pneumatic workpiece clamping • Electrostatic mist extractor • Fire extinguishing system • Oil collecting pan, 2 grinding wheel flanges, Complete set of Manuals • Turmoil Drive Chiller • Loader Pallets: 8pcs – 3/16”, 1/4”, 5/16”, 3/8”, 1/2”, 5/8”, 3/4”, 1-1/4” • 10pcs - HSK Wheel Arbors Software: • Windows XP Pro Svc Pack 3 • Tool Studio V3.3 • The computer was upgraded & is very fast rendering tools in Tool Studio Condition: • Excellent condition, very accurate & consistent. October 2023 Y axis Complete rebuilt, Linear motor, rails, Compensation Cylinder, Festo Booster Pump done by United Grinding. • 1 Micron Filtration system was used on the machine (not included), so it’s been kept extremely clean • We can load onto a flatdeck for shipping for $1200. We can also provide shipping quotes if you would like & crating for Sea Freight shipping.

Condition: used, Year of construction: 2021, Serial number: WFDFLT2200101xxxx Please contact ATS Norway AS for more information Please provide reference number upon request: 19960 Specifications: Model year: 2021 Axle: 2-axle Wheelbase: 181 cm Length: 960 cm Length on plan: Approx. 640 cm Width: 255 cm Tires: See pictures Lift on 2nd axle: Yes Air suspension: Yes Trailer hitch: VBG Tool cabinet: Yes Ready for delivery: Yes Fgslq Hov U Sizj Tcqeb Description: Fliegl Nor-slep flatbed trailer from 2021, very little used. The trailer is ready for delivery. Technical approved: Yes EU-approved until: 26.03.2026 Own weight: 4100 Total Weight: 20000 Payload: 15900 Width: 255 Length: 960

Condition: good (used), Year of construction: 2000, gear diameter: 449 mm, Equipped with: Fanuc 150MB CNC Control Dry Cutting Cutter Shroud Chip Evacuation System Auto Doors Hydraulic System Lubrication System Work light Stack Light Specifications: Largest Speed Ratio: 10:01 Work Area (Continuous): Largest Depth of Teeth: 15.24 mm Largest Width of Tooth Face: 50.8 mm Work Area Axis: Horizontal Movement X Axis: -114 - 178 mm Vertical Movement Y Axis: -178 - 190 mm Movement of the Carriage Baseplate Z-Axis: -10.16 - 500 mm Fslq Heruakgo Tcqsgb Workpiece Headstock Swiveling Range B-Axis: -3 - 90 Degree Maximum Distance Machine Center to Spindle Side: 165 mm Number of Teeth: 5-200 Inclusive Max. Gear Pitch Dia. of Typical 35 Deg. Spiral Angle Gear Using Max. Cutter Dia. 12" Cutter at the Following Ratios: Face Milling 1 x 1 - 13.5" - 342.9mm 2 x 1 - 16.0" - 406.4mm 5 x 1 - 17.7" - 450.0mm Face Hobbing (210mm Dia. Cutter) 1 x 1 - 10.560" - 268.22mm 2 x 1 - 10.286" - 275.00mm 5 x 1 - 11.810" - 300.00mm Milling Head Diameter: Helixact: 100,125,169,200,250,320mm Continuous Gumption Procedure, Teichloroethylene: 102 - 210 mm Workpiece Spindle: Drilling of Large Diameters: 5 3/64" Cone Upward Gradient on 304.8 mm (1 Foot): 21/32" Deep One of the Cone: 5.29" Diameter of the Whole Spindle Perforating: 3.35" Speeds: B-Axle Workpiece Headstock Drag Axis: 30 Degrees A-Axle Workpiece Spindle Number of Revolutions: 0 83 min-1 X-Axis Horizontal: 80 mm/sec Y-Axis Vertically: 80 mm/sec Z-Axis Carriage Baseplate: 80 mm/sec Space Requirement L x W x H (Approximate): 4.75 x 3.40 x 2.54m / 188" x 134" x 100" Machine Weight (Approximate): 10980 kg / 24,156#

Condition: new, Year of construction: 2024, All-round fiber laser metal tube cutting machine Multiple function options help the laser tube cutting machine be used in numerous tube cutting processes. The slender nozzle allows the laser tuber cutter to avoid interference and cut various types of tubes, including special-shaped tubes like H-Beam, P-Beam, I-beam, etc. Cutting machine clamping becomes convenient, easy and fast, with 3 seconds at the soonest to clamp and high repeat precision Cutting performance and efficiency are improved by maintaining gas flow steady with little turbulence. BodorGenius, combined with the lightning-quick piercing process, completes the whole piercing during it moves down on Z-axis. Thanks to the technology, no reworking is necessary for medium and thick sheet piercing. Angle steel and channel steel cutting are standard with no need for additional installation. Optimized edge searching method and algorithm guarantee higher cutting precision and better steadiness of the laser cutter. Condition: New Laser Type: Fiber Laser Laser Power: 1500W, 2000W, 3000W, 6000W Maximum machinable tube length: 6500mm/9200mm Chuck drive types: NC electric chuck Graphic Format Supported: AI, BMP, Dst, Dwg, DXF, DXP, LAS, PLT CNC or Not: Yes Cooling Mode: WATER COOLING Fslq H Tohwrlxjcqegb

Condition: used, Year of construction: 1987, operating hours: 17,500 h, Field of application: Construction Please contact ATS Norway AS for more information Please provide reference number upon request: 20029 Specifications: Model year: 1987 Hours: Approximately 17,500 Weight: 15,400 kg Engine replaced with an engine that has run approx. 4,000 hours Bucket with new steel Tires (see pictures) Brake pads replaced in 2024 Gaskets replaced Extra front clutch Spare wheel Rear view camera Rotor lamp AC/climate Fslq Hjv U R I Aj Tcqjgb Video available Delivery by appointment Description: Volvo L120 wheel loader from 1987, equipped with a new engine that has run approx. 4,000 hours. The bucket has had new steel, and the seals have been replaced. The right front cylinder has a small leak, but the current owner has had no problems with this. Spare wheel included. Delivery by arrangement. Hours: 17500 Total Weight: 15400

Condition: good (used), overall weight: 8,500 kg, total length: 3,990 mm, total width: 2,280 mm, total height: 2,500 mm, Year of construction: 2013, INGERSOLL CM SYSTEMS AOHD AGILE OIL HOLE DRILL Equipped with: Siemens 840D Control (2) Drill Heads 20-Tool Rack HSK 50A Taper (2) 7" 3-Jaw Chucks (2) Tailstocks (2) Steady Rests Chip Auger Chip Conveyor Mist Collector Hydraulic System Q R 2 Lube System Air Compressor Specifications: Maximum Length: 1050 mm (41.3") Minimum Length: 180.0 mm (7.1") Maximum Stroke: 250.00 mm Fgolortrx Rsq H Tcqob Maximum Main Journal Diameter: 115.0 mm (4.5") Maximum Pin Journal Diameter: 100.00 mm (3.9") Maximum Swing Diameter: 250.0 mm (9.84") X-Axis Travel: 1450 mm (57.1") Y-Axis Travel: 150 mm (5.9")W/HSK 50 Z-Axis Travel: 305.0 mm (12.0") A-Axis Travel: 360 Degree B-Axis Travel: 90 Degree Feed Rate (Z): 1 m/min Maxim (40"/min max) Position Accuracy of X,Y,Z Axes: .010 mm (.00039") Position Accuracy of A & B Axes: .03 Degree Position Repeatability of X,Y,Z Axes: .005 mm (.0002") Position Repeatability of A & B Axes: .005 Degree Spindle Power: 5.5 kW (7.5 hp) Spindle Speed: 0-6,900 RPM Tool Adaption: HSK 50E or A Tool Storage (ATC): 20 Total - 10 Per Spindle W/HSK 50 Lubrication - Slides & Ball Screws: Automatic Central Lubricator Approximate Floor Space (LxWxH): 4.0 x 2.3 x 2.5 m (13.1 x 7.5 x 8.2 Ft) Approximate Machine Weight: 8,500 kg (18,740 #)

Condition: used, Year of construction: 2006, operating hours: 6,050 h, Field of application: Construction Serial number: CAT0321CEKCR0xxxx Please contact ATS Norway AS for more information Please provide reference number upon request: 20036 Fgjlev U Samsq H Tcqeb Specifications: 2006 model Hours: approximately 6,050 Power: 103 kW Weight: 25,200 kg Hydraulic sanding bucket Excavator bucket with teeth Chassis (see pictures) Central lubrication Work light Air conditioning/AC Ready for delivery Description: CAT 321C LCR short hedge from 2006, equipped with hydraulic sanding bucket and toothed bucket. The machine has just over 6,000 hours. It is ready for delivery for quick delivery. Hours: 6050 Total Weight: 25200 Kw: 103

Condition: good (used), gear diameter: 508 mm, total height: 1,780 mm, total length: 2,990 mm, total width: 2,200 mm, MODEL 610 GLEASON GEAR ROUGHER/FINISHER Equipped with: Hydraulic Workholding Pendant Control Chip Conveyor Index Plate Geneva Cam Change Gears Hydraulic System Coolant System Manuals Specifications: Maximum Gear Pitch Diameter: 20" Cutter Diameters: 9", 10.5", 12",14",16", 18" Whole Depth: 1.250" Root Angle: 60 to 80 deg. Face Width: 3.0" Extreme Ratio (Minimum): 2.25 to 1 Number of Teeth: 20 to 75 Diameter of Taper Hole at Large End: 3-27/64" Cutter Speeds (Per Minute) for Roughing: 15.6' to 87.7' Feeds (Seconds Per Tooth) for Roughing: 3 to 35 Cutter speeds (Per Minute) for Finishing: 6.8' to 20.5' Feeds (Seconds Per Tooth) for Finishing: 3 to 9 Floor Space: 118" x 86.5" x 70" H Weight: 17,500 lbs. Fslq Hsrtryko Tcqogb

Condition: used, Year of construction: 2019, Please contact ATS Norway AS for more information Please provide reference number upon request: 19957 Specifications: Model year: 2019 Bottom: 7 mm Hardox 500, reinforced with 5 mm Hardox 450 Length: 4.6 meters Width: 2.55 meters Fgelq H Tev U R Nyscqsb Height: 1.1 meters Volume: 12 m Ready for delivery: Yes Description: This 2019 model Mailler tipper body is equipped with a robust 7 mm Hardox 500 bottom, which is further reinforced with 5 mm Hardox 450 for extra durability. The body is in excellent condition, almost unused, and above all like new. It is ready for delivery and can be put into operation immediately.

Year of construction: 1978, Condition: good (used), U.S. MODEL 50TX120 VERTICAL PULL DOWN BROACH Equipped with: Retriever Puller Hydraulic System Coolant System Chiller Chip Conveyor Manuals Specifications: Normal Broaching Capacity: 100,000 Lbs at 922 PSI Peak Force Capacity: 133,600 Lbs at 1350 PSI Main Slide Stroke (Bump Inches): 106 Maximum Cutting Speed: 20 Ft/Min. Fgelq H Tcjrtrzljqsb Maximum Return Speed: 40 Ft/Min. Main Pump Motor: 75 HP at 900 RPM Hydraulic Reservoir: 365 Gallons Handling Pump Motor: 10 HP at 1200 RPM Coolant Pump Motor: 1.5 HP at 1800 RPM Coolant Pump Capacity: 100 Gallons / Min at 23 Head Ft. Coolant Reservoir Capacity: 600 Gallons Approx. Floor Space ( Width x Depth x Height): 65" x 96" x 243" Net Weight, Approximate: 79,000 #

Condition: used, Year of construction: 2001, operating hours: 13,320 h, Field of application: Construction Serial number: K3xxxx Please contact ATS Norway AS for more information Please provide reference number upon request: 18892 Specifications: - 2001 model - Certified until 02.25 - Hours: Approx. 13,320 - Weight: 24,500 kg - 118 kW - Undercarriage (see pictures) - Belt width: 60 cm - KM quick release - Gjerstad Grave bucket - Extra light - Easy Dig Novatron - Radio/CD - Climate/AC - Services taken by owner - Videos are available - Ready for delivery Description: Folq H Tcsvgx Rpsqogb Komatsu PC290 Tracked excavator from 2001. The machine is sold with a quick-release attachment and digging bucket. Certified until 02.25. Video of hydr. Pump and motor are nearby. Hours: 13320 Total Weight: 24500 Year controlled: Yes Year controlled until: 02.25 Kw: 118

Condition: excellent (used), Year of construction: 2018, Functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 655 mm, travel distance Z-axis: 750 mm, controller manufacturer: Siemens, controller model: Sinumerik 840 D, workpiece diameter (max.): 700 mm, spindle speed (max.): 18,000 rpm, distance between spindles: 700 mm, number of spindles: 2, number of slots in tool magazine: 80, Two complete and one partial 5-Axis CNC high production flexible machining lines manufactured by Grob are available for negotiated sale. Each line has a Fanuc Robot "load-in" station where the part is introduced to the Grob integrated gantry system. The gantry system has two traveling arms for loading/unloading parts in to the (8) Grob G326 Dual Spindle 5-Axis CNC Machining Centers and (3) Sugino JCC-W6650TE Jet Clean Center CNC Washing and Deburring Machines. Parts are then removed and placed in dunnage by a Fanuc Robot "load-out" station. Line 1 (8) GROB G326 Dual Spindle 5-Axis CNC Horizontal Machining Centers (2018 - 2021): Siemens Sinumerik 840 D CNC Controls, (2) HSK-A63 18,000 rpm Spindles per Machine, (2) 80 Pocket ATC per Machine, Independent Z-Axis, Independent X-Axis, XV-Axis, Spindle/Tool Seating, Spindle No Load Monitoring, Gantry Top Door Loading, 600 mm X-Axis, 655 mm Y-Axis, 750 mm Z-Axis, 700 mm Distance Between Spindles, 2.3 Seconds Chip-to-Chip Time, 1070 kg Max Table Load Spindles Replaced 2022 GROB SPC: Part Handling Transfer Station Fgelq Hjv Dydxs Tcqsb (2) SUGINO JCC-W6650 CNC Turret Type High Pressure Washing & Deburring Machine (2018): Fanuc Series Oi-MF Control, HP Water Deburring - Variable Up to 7,250 PSI, Sugino OEM Tri-Plex Plunger Pump, 0.08 mm Positioning, Turntable, 6-Tool Turret, 650 mm X-Axis, 500 mm Y-Axis, 500 mm Z-Axis, 48 m/min Rapid Feed, Multiple Filtration Options to 5-10 Microns (1) SUGINO JCC-VCD55SNE CNC Vacuum Dryer (2018): Fanuc Oi-MF Control, 5.5 kW Vacuum Drying Pump, Omron F3SJ Safety Light Curtain, Signal Tower (3-Layers), Ethernet I/P, 4-Axis (X,Y,Z,A), Manual Pulse Generator (2) FANUC Robots: R30iB Controller, Control Pendant, Safety Guarding GROB: Integrated Gantry System Line 2 (8) GROB G326 Dual Spindle 5-Axis CNC Horizontal Machining Centers (2018 - 2021): Siemens Sinumerik 840 D CNC Controls, (2) HSK-A63 18,000 rpm Spindles per Machine, (2) 80 Pocket ATC per Machine, Independent Z-Axis, Independent X-Axis, XV-Axis, Spindle/Tool Seating, Spindle No Load Monitoring, Gantry Top Door Loading, 600 mm X-Axis, 655 mm Y-Axis, 750 mm Z-Axis, 700 mm Distance Between Spindles, 2.3 Seconds Chip-to-Chip Time, 1070 kg Max Table Load GROB SPC: Part Handling Transfer Station (2) SUGINO JCC-W6650 CNC Turret Type High Pressure Washing & Deburring Machine (2018): Fanuc Series Oi-MF Control, HP Water Deburring - Variable Up to 7,250 PSI, Sugino OEM Tri-Plex Plunger Pump, 0.08 mm Positioning, Turntable, 6-Tool Turret, 650 mm X-Axis, 500 mm Y-Axis, 500 mm Z-Axis, 48 m/min Rapid Feed, Multiple Filtration Options to 5-10 Microns (1) SUGINO JCC-VCD55SNE CNC Vacuum Dryer (2018): Fanuc Oi-MF Control, 5.5 kW Vacuum Drying Pump, Omron F3SJ Safety Light Curtain, Signal Tower (3-Layers), Ethernet I/P, 4-Axis (X,Y,Z,A), Manual Pulse Generator (1) FANUC Robot: R30iB Controller, Control Pendant, Safety Guarding GROB: Integrated Gantry System Line 3 (4) GROB G326 Dual Spindle 5-Axis CNC Horizontal Machining Centers (2018 - 2022): Siemens Sinumerik 840 D CNC Controls, (2) HSK-A63 18,000 rpm Spindles per Machine, 80 Pocket ATC, Independent Z-Axis, Independent X-Axis, Spindle/Tool Seating, Spindle No Load Monitoring, Gantry Top Door Loading, 600 mm X-Axis, 655 mm Y-Axis, 750 mm Z-Axis, 700 mm Distance Between Spindles, 2.3 Seconds Chip-to-Chip Time, 1070 kg Max Table Load GROB: Integrated Gantry System

Condition: used, Year of construction: 2017, operating hours: 9,700 h, Field of application: Construction Serial number: KMTPC250HHC00xxxx Please contact ATS Norway AS for more information Please provide reference number upon request: 14437 Specifications: - 2017 model - Hours: Approx. 6700 - Weight: 23,800 kg - 123 kW - Central grease - S70 quick release - Undercarriage (see pictures) - Belt width: 60 cm - Width of the machine: 300 cm Felqovgxq As H Tcqogb - Additional hydraulics - Bunker pump - GPS - Rototilt - Grave bucket - Cleaning bucket - Reversing camera - Rotor lamp - Extra light - Ledbar in the front - Radio/CD - Climate/AC - Video - Service history - Ready for delivery Description: Komatsu crawler excavator from 2017 in good condition. It comes with GPS, tilt and 2 buckets. Can show service history and is ready for delivery. Hours: 9700 Total Weight: 23800 Width: 300 Kw: 123

Condition: used, mileage: 600,699 km, Year of construction: 1990, Serial number: YS2RH6X2Z0114xxxx Please contact ATS Norway AS for more information Please provide reference number upon request: 19850 Specifications - 1990 model - 600,699 km - Not Eu-approved - Manual transmission - Repair item - Tires (see pictures) - 6x2 - Front suspension: steel - Rear suspension: steel - Bogie lift - Hiab crane - 14 t/m Hiab - 2 Hydraulic extensions - 2 Manual extensions - Length on plan: 6,465 m - Ready for delivery Description: We have a 1990 Scania R143 H 6x2 Timber truck Repair item w/ 14t/m Hiab crane aggregate. The car is being sold as repair item as it is not Eu-approved and is therefore in uncertain condition. Both car and crane work, but some additional costs must be considered. Ready for delivery. Km: 600699 Technical approved: no Own weight: 10400 Total Weight: 27500 Payload: 17025 Width: 250 Fgelev U Svhsq H Tcqsb Length: 896 Gearbox: Manual

Condition: used, Year of construction: 2013, operating hours: 11,910 h, Field of application: Construction Serial number: CAT0324ETTLF0xxxx Please contact ATS Norway AS for more information Please provide reference number upon request: 19783 Specifications: - 2013 model - Hours: Approx. 11,910 (can increase) - Chassis (see pictures) - Central grease - S70 quick release Felqsv U R Txs H Tcqogb - Tiltrotator - Excavator bucket - Sanding bucket - Narrow bucket - Ripper tooth - Hammer hydraulics - Radio/CD - Air conditioning/AC - Maintenance is done by owner - Ready for delivery Description: CAT 324 Crawler excavator from 2013. The machine is sold with Rototilt, 3 buckets and Ripper tooth. Tilt needs some maintenance. Ready for delivery. Hours: 11910