Used Gesan Dvs 250 for sale (18,705)

Year of construction: 1985, Condition: used, diameter 250 mm total power requirement kW weight of the machine ca. t dimensions of the machine ca. m Debu Umegl Dxtsfcocg

Year of construction: 1998, Condition: used, machine/vehicle number: MBMAKZDoppel, 1 piece - Demag chain hoist Crane hoist 250Kg DKUND 2-250 K V1 with double chain 125Kg payload each 10 pieces are available 250KG / 0.25t payload / lifting capacity - 1 fall Distance between the two lifting chains variable 20-120cm, lifting height approx. 3m Without frame, only the chain hoist with both deflection rollers including the blue mounting plates is sold Dcobu Ustn Ritjmfcog Weight complete approx. 50 kg, connection to 400V 50Hz TOP condition, fully functional. Not a worn or used device! Connect and put into operation. Comes from current operation Item location is 75053 Gondelsheim See pictures

Condition: used, power: 74 kW (100.61 HP), Equipment: ABS, air conditioning, all wheel drive, Pallet fork, top link SK Hyd- KAT 3-2-70 Profi + Setting 2 MZW 540/540E / 1000 rpm Front linkage KAT - 2 relief Engine no. 33AWI.788 MLD104076 Cabin no. M0B113082 Int. vehicle no. ASK number end customer 11014493 Net weight 5,456.000 KG Gross weight 5,456,000 KG Front loader FENDT CARGO 3X/65 DW T298 Fendt 211 S Vario Gen3 Basic tractor L041 Profi+ Setting2 M095 Standard fan G035 40 km/h - version G048 MZW 540/540E/1000 rpm K044 Top link SK hydr. Cat. 3/2/ 70 K129 Front power lift Cat. 2 lag K155 Front PTO 1000 rpm K210 Ball sleeve Cat. 3/2 1 pair for lower link K221 Ball sleeve Cat. 3/2 for top link H006 Additional valves dw 1/1 + 1/2 rear UDK H078 Additional valve dw 1/3 rear UDK H145 Additional valve dw 2/1 front H172 Load sensing system with variable pump H200 Power-Beyond H201 External hydraulic valve actuation C001 Paintwork Nature Green / Rims Terra Red C060 Wipe and wash. rear C072 Automatic climate control C080 Comfort seat with air suspension C122 Terminal 12# C135 Universal holder for mobile phone C165 Brake lever holder device C167 Steering wheel including twist grip C170 Additional equipment holder C182 Mechanical cabin suspension C190 Additional lighting at the front C198 Work light on the front roof LED C207 Work light on the A-pillar LED C219 Tail light / indicator LED C226 Daytime running light C260 Work light on the rear roof LED C299 Radio - CD MP3 with hands-free system E030 Basic lane guidance package E044 RTK NovAtel E110 Contour Assistant E091 Machine control Isobus. A057 Front axle suspension A073 Pivoting front fender Djbu Umotvk Ebofcscg

Condition: excellent (used), Year of construction: 2004, Arburg 320K 700-250 Injection Moulding Machine Year of manufacture -2004 Control - Selogica CLOSING UNIT Closing force (Ton) 70 Space between columns(mm) 320x320 Diameter of column (mm) 60 Plate size (H x V) (mm) 476x476 Mould height (Max.- Min) (mm) 400-200 Space between the platen (mm) 650 Closing speed (mm/s) 88 (l/min) Opening stroke (Max.) (mm) 250 Ejection force (kN) 30 INJECTION UNIT Screw diameter (mm) 30 Injection weight (Max.) (g) 89 Volume (cm3) 106 Injection pressure (bar) 1820 Djbu Umfeq A Rp Nscjcg Injection speed (cm3/s) 121 Nozzle force (Max.) (Ton) 70 Nozzle stroke (Max.) (mm) 240 Plasticization capacity (g/s) 103.04 Number of heating zones 5 Heating power (kW) 6.1 OTHER DATA Oil tank capacity (Liters) 120 Weight (kg) 2190 Dimensions (LxWxH) (m) 3.37x1.405x1.99

Condition: good (used), Year of construction: 2010, machine/vehicle number: 16179_30, Consumer powder packaging - gas-tight block bottom bag packaging line including: Rovema SBS 250 bag machine with labeler and sealing strip supply - output 2450 bags/hour (in 725 bag format). Equipped with a controlled atmosphere system (N2). Bag dimensions 135x65 (roll width 425). Dcsbuju U Nbio Umfcjg

Year of construction: 2000, Condition: used, Max. speed: 11.000 cycles/h, web width: 130-265mm, max. print width: 254mm, format length: 101.6-254mm, max. processing width: 254mm, paper strength: 100-180g/m², max. cardboard strength: 300g/m², length: 10,509mm, height: 2806mm, weight: 9.5t. Dobu Uodv Nigemfcscg

Condition: new, weight max. in kg 250 kg arm length 4000 mm height 3425 Unterkante Ausleger total column height 4.025 mm swivelling range 270 Grad Total weight, approx. 375 kg Description: - Load capacity 250 kg - projection 4000 mm - Construction height 4025 mm - Crane lacquer in color RAL 1007 daffodil yellow - Calculation basis DIN 15018 - Crane classification H2 / B2 - Operating location hall operation - Size / bracket profile LS36 / FormC 110x90 - Height of the lower edge of the boom 3425 mm - Operating voltage 3 / PE ~ 50 Hz 400 V - Direct control type of control - Degree of protection IP55 - Swivel range, nominally 270 ° - Panning by hand including: - Anchor rods size LS 36 - Consists of 8 pieces M24 mm x 800 mm, with 1 steel template (420/8) for - Fastening to the foundation, including accessories Debu Umovb Ixljfcocg Electric chain hoist: - Chain hoist type GM 2 250.6-1, 1-leg - painted in color RAL 5017 - traffic blue - Load capacity 250 kg - hook path 4000 mm - highest hook position 3034 mm - Calculation basis FEM 9.901 - Drive group 2m / M5 - Lifting, 2-stage (pole switchable) 1.5 / 6 m / min - Lifting power 0.09 / 0.35 kW - duty cycle 60% ED Fig. Shows a similar crane system

Condition: used, mileage: 525,115 km, first registration: 07/2014, fuel type: diesel, color: other, tire size: 305/70/22.5, fuel: diesel, wheelbase: 5,900 mm, gearing type: automatic, emission class: euro6, suspension: steel-air, loading space width: 2,480 mm, loading space length: 7,820 mm, loading space height: 2,280 mm, Year of construction: 2014, Equipment: air conditioning, cruise control, = Further options and accessories = - Aluminum fuel tank - Window with electric operating device - Low noise - Speed limiting device - Air suspension - Fog lights - Radio/CD player - Reversing camera - Side mirrors with electric adjustment - Digital speedometer Debujvf E Tbs Umfcjcg = Further information = tire size: 305/70/22.5 Brakes: Disc brakes Front axle: Suspension: Leaf suspension Rear axle: Suspension: Air suspension Unladen weight: 9,960 kg Dimensions (L x W x H): 782 x 248 x 228 cm Cooling engine: Diesel Damage: none License plate number: KTG512

Condition: good (used), Year of construction: 2009, Used 4 meter CNC press brake from Bystronic Type: Xpert 250 4100 Capacity: 4100 x 250 tons Dobu Usun I N Tsmfcscg Year of construction: 2009 MMC ByBend control Y1, Y2, X, R, Z1, Z2 + DeltaX CNC controlled CNC hydraulic cambering Bending aid Automatic tool clamping RFA Model

Condition: used, Year of construction: 2005, Horiz. Machining center with pallet linear storage (LSP) 8-fold Travel x/ y/ z = 800/ 800/ 800 mm B-axis 360 x 1 ° 6 machine pallets in the system Pallet size 630 x 630 mm Spindle speed up to 12,500 rpm Tool magazine (rack) 234-fold HSK 100 tool holder CNC control Siemens 840D Dcsbu Uju Hx Dtemfceg Control panel on the tool magazine Infrared receiver for measuring probe Work area flushing Integrated tool monitoring Drill breakage monitoring Collision monitoring High-pressure coolant system Chip conveyor Dynamic package 1 Heller technology cycles Increased tool weight for magazines Coolant cooler CFC-free Precision package Temperature compensation and precision cooler

Year of construction: 2003, Condition: ready for operation (used), There are five injection moulding machines Arburg available. 1) Arburg 320C 600-250, year of construction: 2001, operating hours: 83,365h. 2) Arburg 420C 1000-250, year of manufacture: 2001, operating hours: 90,769h. 3) Arburg 270C 300-100, year of construction: 1999, operating hours: 78,784h. 4) Arburg 320C 300-100, year of construction: 2000, operating hours: 78,784h. 5) Arburg 270C 300-100, year of construction: 2007, operating hours: 59,885h. Dcjbetyyn Hou Umfcjg

Year of construction: 2002, Condition: ready for operation (used), Clamping force: 1000kN, screw diameter: 30mm, platen dimensions X/Y: 570mm/570mm, opening stroke: 500mm, min./max. mold height: 250mm/750mm, injection weight: 121g/hp, injection volume: 106cm³, operating hours: 75320h. Debstynkveu Umfcjcg

Year of construction: 2002, Condition: ready for operation (used), Clamping force: 2500kN, clear tie bar distance: 630mm/630mm, opening stroke: 1150mm, min. mold installation height: 330mm, screw diameter: 60mm, specific injection pressure: 2000bar, max. stroke volume: 670cm³, connected load: 74kW, control: MC4. Machine dimensions: 5700mm/2200mm/2300mm, machine weight: 12.5t, operating hours: 47,572h. Available from February 2025, including special accessories, Krauss Maffei LRX-S 100, 8x hot runner control points, 4x core pull, blow-out unit, pressure accumulator, hydraulic tie-bar pulling device, energy-saving circuit, ALS interface, 20mA interface and color dosing device interface. On-site inspection is possible, documentation available. Dcsbuouiykdj Umfcjg

Year of construction: 2005, Condition: ready for operation (used), Travel X/Y/Z: 2500mm/900mm/800mm, speed: 18000rpm, spindle power: 35kW, max. table load: 3000kg, tool places: 30, machine dimensions X/Y/Z: approx. 6500mm/3000mm/3000mm, weight: approx. 20000kg, control: Siemens Sinumerik 840D, operating hours: 55730h, spindle hours: 18696h. Z-axis brake defective, roller shutter in machine room defective, screen cable defective. Including cooling lubrication system Knoll VRF 250/1250, documentation available. On-site inspection is possible. Dobu Umfjvamqdjcocg

Year of construction: 2013, Condition: ready for operation (used), Clamping force: 250kN, distance between tie bars: 270mm/270mm, platen dimensions X/Y: 380mm/380mm, screw diameter: 25mm, injection volume: 49cm³, injection weight (PS): 45g, injection pressure: 2000bar, cores: 2+5, heating zones: 12, pump hours: 2388h, automatic operation: 1600h. Including Multilift H with B-axis, clean room module. Dobu Umjtyax Eefcecg

Year of construction: 1990, Condition: ready for operation (used), Center width: 1500mm, center height: 250mm, turning diameter over bed/offset/over facing slide: 500mm/710mm/305mm, bed width: 340mm, spindle bore: 80mm, spindle diameter: 95mm, speed: 1500rpm. Stroke of face slide/top support: 300mm/170mm, top support swivel range: +/-45°, tailstock quill: 80mm, quill stroke: 205mm, motor power: 9kW. Machine dimensions X/Y/Z: approx. 3000mm/1400mm/1650mm, weight: approx. 2700kg. Documentation available. On-site inspection is possible. Dcobusuyk Rro Umfcjg

Year of construction: 2006, Condition: ready for operation (used), Travel X/Y/Z: 800mm/800mm/800mm, feed force X/Y/Z: 15000N/15000N/17500N, feed speed X/Y/Z: 50m/min, max. rotary table speed: 25rpm, spindle diameter: 100mm, tool holder: HSK 100, spindle power S1-100%: 40kW, spindle speed: 6000rpm. Magazine capacity for a maximum tool diameter of 280mm: 23. Max. pallet dimensions X/Y: 630mm/630mm, max. pallets in the system: 6, coolant tank volume: 1500l, 50bar high-pressure pump delivery rate: 22l/min. Machine dimensions X/Y/Z: approx. 6300mm/4900mm/4000mm, weight: approx. 19,300kg, control: Siemens 840D powerline, operating hours: 74,637h. Includes integrated tool monitoring IPM, remote diagnostics via modem, Renishaw MP10 touch probe, RSP 4-position round storage, chip removal, coolant system with Knoll VRF 250 vacuum rotary filter, pallet changing device, 6 pallets, 4 of which are clamping towers with universal clamping bars, approx. 100 HSK 100 tool holders, and Losma filter system. Documentation available. On-site inspection is possible. Expected to be available from the end of January 2025. Djbuouxdhuj Umfcocg

Year of construction: 1988, Condition: ready for operation (used), Three older eccentric presses from various manufacturers are available. The presses were only used sporadically for punching cycle holes in plastic sheets (approx. 350mm/350mm/0.4mm). 1) W. Paul Müller, ExP 25, year of manufacture: 1970, pressure capacity: 25t, throat depth: 190mm, strokes: 120/min, slide adjustment: 50mm, stroke adjustment: 0mm-60mm, motor power: 2hp. 2) L. Schuler PE 25/250, year of construction: 1988, throat depth: 250mm, table dimensions X/Y: 500mm/465mm, ram dimensions X/Y: 180mm/200mm, stroke adjustment: 8mm-60mm, ram adjustment: 50mm, motor power: approx. 1.4kW, weight: approx. 1600kg. 3) Eisenwerk Hensel, compressive force: 25t, stroke adjustment: 72mm. Documentation available. On-site inspection is possible. Individual sale not possible. Dcsbu Umfsu Nlk Eocjg

Year of construction: 2002, Condition: ready for operation (used), Travel X/Z: 800mm/300mm, max. turning diameter: 320mm, max. turning length: 300mm, speed: 5000rpm, spindle power: 22kW, tool slots: 12, tool holder: VDI 40, main spindle clearance: 79mm. Machine dimensions X/Y/Z: approx. 5000mm/3900mm/2800mm, weight: approx. 6700kg, control: Siemens Sinumerik 840D, operating hours: 42996h. Documentation available. On-site inspection is possible. Dcjbu Umfsubyy Necsg

Year of construction: 1999, Condition: ready for operation (used), Max. clamping force: 500kN, opening stroke: 350mm, tool installation height: 200mm, heating output: 6.5kW, screw diameter: 40mm, weight: 2.33t, no documentation available. Dsbu Umjilhfcsfcecg

Year of construction: 2003, Condition: ready for operation (used), There are 3 retrofit Feintool fineblanking presses with controls from Pneutronik available. 1) Feintool GKP-F 160, year of manufacture: 2001, cutting force: 100t, total pressing force: 160t, head pressure: 40t, table pressure: 50t, stroke rate: 70/min, power: 22kW, max. material thickness: 6mm, stroke height: 62mm, machine dimensions X/Y/Z: approx. 1800mm/1800mm/2800mm, weight: approx. 9000kg, control: Pneutronik. 2) Feintool GKP-F 160, year of manufacture: 2003, cutting force: 100t, total pressing force: 160t, head pressure: 40t, table pressure: 50t, stroke rate: 70/min, power: 22kW, material thickness: 6mm, stroke height: 60mm, machine dimensions X/Y/Z: approx. 1800mm/1800mm/2800mm, weight: approx. 9000kg, control: Pneutronik. Presumably there is bearing damage to the flywheel. 3) Feintool GKP-F 250, year of manufacture: 2000, total pressing force: 250t, head pressure: 75t, table pressure: 75t, ejector force: 18t, material thickness: 10mm, lifting height: 61mm, machine dimensions X/Y/Z: approx. 2100mm/3100mm/3200mm, weight: approx. 14500kg, control: Pneutronik. Presumably there is bearing damage to the worm shaft. Documentation available. On-site inspection is possible. Dcobu Umfsu Dalyjceg

Year of construction: 2000, Condition: ready for operation (used), Number of axes: XYZC (8-axis), turning diameter: 250mm, turning length: 300mm, spindle diameter: 71mm, speed: 4500rpm, tool holder: BMT-55, number of tool positions: 2 x 12 positions, dimensions X/Y/Z: approx. 4000mm/4600mm/2200mm, weight: approx. 6000kg. Including bar loader Profimat IRCO Breuning, year of construction: 2004, bar diameter/length: 52mm/3000mm, dimensions X/Y: 1200mm/4000mm. Dcobu Umotufb Dsfcjg

Condition: ready for operation (used), Year of construction: 2019, Propulsion type: Diesel EURO 6e, engine: 4 cylinders with DPF and SCR, engine manufacturer: VM, engine type: R754, engine power: 75kW, max. driving/working speed: 60km/20km/h, gradeability: 25%, working width with 273 working brakes: 2625mm/2710mm. Sweepings container: 2500l, fresh water tank: 200l, emptying height: 1600mm, turning radius: 2060mm. Dimensions X/Y/Z: approx. 4500mm/1300mm/2000mm, unladen weight: approx. 3800kg, permissible total weight: 6000kg, operating hours: 3214h, mileage: approx. 21000km. Documentation available. Dcjbu Uetzn D Rjmfcjg

Year of construction: 1988, Condition: ready for operation (used), Connected load: 9.5kVA, was maintained regularly, an inspection is possible. Debu Uenk Uxvjmfcscg

Year of construction: 2012, Condition: ready for operation (used), Number of filling stations: 8, throughput: 30 cycles/min, connected load: 6kW, with heated double jacket on the storage container, accessories, filling heads, screw conveyor, conveyor belt and documentation, on-site inspection is possible. Dcjbjqygxmju Umfcjg