Used Gesan Dvs 250 for sale (18,726)

Year of construction: 1987, Condition: reconditioned (used), Functionality: fully functional, Fully refurbished Hosokawa Alpine CW 250 used machine by Alpine Originals. The pin mill Hosokawa Alpine Contraplex CW fitted with two driven contrarotating discs. It is used to grind soft materials, even with high fat or humidity content. It allows also the processing of certain flexible materials or those that can´t lose their properties during comminution in cryogenic mode using liquid nitrogen (LN2) freezing them. This micronizer is perfect to pulverize different coarse products down to a finer powder and within different industries where micronization might be needed, such as minerals, chemicals, food, pharma, cosmetics, recycling, etc. This grinder can be used for the pre-cut of different materials. It is able to process coarse products up to approx. 3 Mohs´ hardness by reaching medium to fine particles with end-product fineness values between d97 40 to 500 micrometer (µm) top size (product dependent) at the lowest possible energy consumption. The turbo mill can reach this final product range thanks to its two contrarotating pin discs, to achieve the desired fineness. This allows the same machine to process many different products such as fibrous roots or spices to plastics, granulated chemicals or mineral products. The comminution takes place inside the grinding chamber where the rotor plate fitted with pins impacts and projects the particles against the different pin rows reducing their size. The process gas then transports the fines to the mill outlet towards the next stage, normally the filter. Sometimes a cyclone is installed between the mill and filter or even a secondary air classifier. Thanks to the required process air volume, reduced temperature increase during grinding is to be expected compared to other granulation and crushing technologies. Adjusting the final particle size distribution can be easily done by changing different parameters, such as the speed of the grinding disc, the type of pins, air volume, feeding rate, etc. Technical details Cryogenic grinding machine (LN2) Celq Sjrvh Hkovtasrb Construction material: stainless steel Non Pressure Shock Resistant (NPSR) Scope of supply Hosokawa Alpine 250 CW Contraplex pin mill with pin discs and motors A HOSOKAWA ALPINE Originals machine Refurbished by the original manufacturer Use of original components only Original manufacturer warranty Guaranteed manufacturer spare parts supply Short lead time Before delivery, the machine is overhauled, all wear parts are revised and exchanged if needed and customized to your specific needs Possibility to provide all additionally required peripherals or adapt to existing production plant We are also interested in buying back disused HOSOKAWA ALPINE machinery

Condition: used, axle configuration: 3 axles, wheelbase: 8,910 mm, first registration: 12/2014, Year of construction: 2014, Equipment: ABS, = Other options and accessories = - Cooling/freezing system - Air suspension - Disc brakes Colq Sjwazylsvtaorb = More information = Empty weight: 8,944 kg Payload: 33,056 kg GVW: 42,000 kg Dimensions (L x W): 1400 x 260 cm Loading area height: 120 cm Refrigerator engine: diesel and electric (17,506 operating hours diesel; 2,673 electric) Damage: none License plate: ON-52-LV

Condition: used, Year of construction: 2010, power: 3 kW (4.08 HP), color: grey, Manufacturer: Exakt Model: E-LINE 120 EH-250 Year : 2010 Type : Three-roll mill Max flow : 30 l/hour Capacity example : Max. flow rate of 14 l/h with outlet gap of 5 μm Roller diameter: 120 mm Roller width: 250 mm Roller speed ratio: 9:3:1 Maximum usable working width: 205 mm Motor power: 3 kW Minimum gap: 5 to < 1 µm Maximum gap: 220 µm Min. speed: 30 rpm Maximum speed: 600 rpm Self-calibration for accurate cylinder spacing and parallelism Cylinder temperature control via closed circuit (cylinder cooling/heating) Temperature: Max 55°C Cjlq Sov Nicbovtasrb Pressure: 4 bar

Condition: new, overall weight: 2,000 kg, empty load weight: 614 kg, maximum load weight: 1,386 kg, axle configuration: 2 axles, loading space length: 2,530 mm, loading space width: 1,550 mm, suspension: steel, tire size: 165R13C 96/94N, total length: 1,630 mm, total width: 990 mm, total height: 3,930 mm, This tipper has a frame construction with a closed profile, which increases its stability. It uses a 5-stage cylinder which enables a larger tipping angle (up to 55°). All side walls can be opened and removed. The model also has a steel floor. | KIPPER 250/2 C S 2T Reversible tipper | Galvanized frame | Lockable storage shaft for 2 access ramps incl. ramps Ramps (L:243cm, W: 30cm) | Loading area dimensions: L: 2.53m W: 1.52m Dropside height: 0.40m Loading height 0.70m | 4 lashing rings (2 left, 2 right) recessed in the floor | Knott axle with drum brake | Leaf suspension | Operating voltage 12V | Spindle parking brake | Errors excepted. Cslq Svju R D Sdotaerb

Condition: used, mileage: 295,200 km, power: 96 kW (130.52 HP), fuel type: diesel, gearing type: mechanical, overall weight: 3,500 kg, first registration: 05/2018, next inspection (TÜV): 05/2026, emission class: euro6, color: white, number of seats: 3, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, Transmission * Manual gearbox, 6 gears Assistance systems * Brake assist * Cruise control * Reversing camera Light and vision * Thermal insulation glazing * Daytime running lights Audio & communication * Navigation system * Radio * Bluetooth cell phone preparation Exterior * Drive: front-wheel drive * Trailer coupling ball * Electr. exterior mirrors * 1x13-pin connector plug Safety * Driver's airbag * Electric stability program ESP * Traction control ASR Colqsvbn I Ts Svtajrb * Anti-lock braking system ABS * Immobilizer Interior * Fabric seats * On-board computer * Wooden load compartment floor * Plastic high load compartment wall paneling Comfort * Air conditioning * Height-adjustable driver's seat * Passenger seat bench * Power steering * Electric windows * Central locking with remote control Other dimensions and weights * Payload: 1,450 kg * Permissible total weight: 3,500 kg * Wheelbase: 4,035 mm ----- IVECO CERTIFIED PRE-OWNED STANDARD - The low-cost alternative. - Fluids topped up (except fuel) - Vehicle may show damage - Subject to prior sale - Your contact persons: - Mr. Axel Scheske, Tel. Mr. Luca Netter, Tel. Sales location / Storage location: Daimlerstraße 34, 48432 Rheine

Condition: used, Year of construction: 2017, Functionality: fully functional, I sell lattice slats for constructions in production halls with a load capacity of 250 kg per square meter. Dimensions 1000 * 1000 mm and 2000 * 1000. Total available 500 square meters. Price per 1 square meter 35 euros. Cjlq Sewc Tbgsvtasrb

Year of construction: 1985, Condition: refurbished (used), A HOSOKAWA ALPINE Originals machine Refurbished by the original manufacturer Use of original components only Celq Sohx N N Uovtaerb Original manufacturer warranty Guaranteed manufacturer spare parts supply Short lead time Before delivery, the machine is overhauled, all wear parts are revised and exchanged if needed and customized to your specific needs Possibility to provide all additionally required peripherals or adapt to existing production plant We are also interested in buying back disused HOSOKAWA ALPINE machinery Used fine impact mill Hosokawa Alpine Contraplex CW 250 pin mill. The Contraplex pin mill is fitted with two contrarotating pin discs achieving high relative speeds, allowing it to reach finer end products than our traditional universal mill type UPZ. This grinder is suitable to comminute many different products for all kind of industries, like chemicals, food, pharma, etc. Material of construction: stainless steel, mainly AISI 316, Pharma finish Wide chamber design, suitable for cryogenic grinding (LN2) allowing it to process heat sensitive, greasy, oily, sticky, hygroscopic materials, etc. which tend to form deposits Non Pressure Shock Resistant (NPSR), non gas tight Without wear protection Scope: Hosokawa Alpine CW 250 with pin discs and motors

Condition: used, axle configuration: 3 axles, wheelbase: 8,910 mm, first registration: 12/2014, Year of construction: 2014, Equipment: ABS, = Other options and accessories = Cjlq Svjwazyfstajrb - Cooling/freezing system - Air suspension - Disc brakes = More information = Empty weight: 8,944 kg Payload: 33,056 kg GVW: 42,000 kg Dimensions (L x W): 1,400 x 260 cm Loading area height: 120 cm Cooling engine: diesel and electric (16,703 operating hours diesel; 2,432 electric) Damage: none License plate: ON-51-LV

Year of construction: 1978, Condition: ready for operation (used), Pressing force: 3150kN, table dimensions: 1250x1100mm, table height: 750mm. Fully functional, last internal inspection: Q1/2025, UVV on Q2/2024. On-site inspection is possible. Crolqjwb E R Ro Svtaeb

Condition: used, mileage: 241,242 km, power: 250 kW (339.91 HP), fuel type: diesel, color: yellow, fuel: diesel, gearing type: mechanical, Year of construction: 2005, Transmission: 8 gears, Manual gearbox Year of manufacture: 2005 Cslq Svowazmrjtaerb Drive: Wheel GVW: 19.000 kg CE mark: yes Price: On request Reference number: 65 Volvo FL 250 4x2. Year: 2005. Milage: 241.242 km. Manual gearbox 8 gears. Max weight: 19.000 kg. Axle load: 1: 7500 kg. 2: 12.000 kg. Engine brake. Camera. Electrical operated windows. Sleeper cabin 1 bed. Nightheater. Steelsuspension. Wheelbase: 5000 mm. Tyres: 315/80R22,5 60-80%. Bronto Skylift S46XDT. Year: 2005. Hours: 4442. Hours RPM: 1686. Widened + Rotated basket. Max wind speed: 12,5 m/s. Max permitted tilt: 0.5 degree. Max capacity basket: 600 kg / 7 persons + 40 kg. Max lateral force: 400 N. 4 point outriggers. Airconnection in basket. Max working height: 46 meter. ID NR: 65. The General Terms and Conditions of Heinhuis are applicable to all adverts, offers and quotations by Heinhuis, all agreements entered into by Heinhuis and the negotiations preceding them. By any form of response you accept the applicability of the General Terms and Conditions of Heinhuis and you declare that you have taken note of these General Terms and Conditions. Our prices are export netto prices.

Condition: used, mileage: 310,500 km, power: 96 kW (130.52 HP), fuel type: diesel, gearing type: mechanical, overall weight: 3,500 kg, first registration: 05/2018, next inspection (TÜV): 05/2026, emission class: euro6, color: white, number of seats: 3, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, Transmission * Manual gearbox, 6 gears Assistance systems * Brake assist * Cruise control * Reversing camera Light and vision * Thermal insulation glazing * Daytime running lights Audio & communication * Navigation system * Radio * Bluetooth cell phone preparation Exterior * Drive: front-wheel drive * Trailer coupling ball * Electr. exterior mirrors * 1x13-pin connector plug Safety * Driver's airbag * Electric stability program ESP * Traction control ASR * Anti-lock braking system ABS * Immobilizer Interior * Fabric seats * On-board computer * Wooden load compartment floor * Plastic high load compartment wall paneling Comfort * Air conditioning * Height-adjustable driver's seat * Passenger seat bench * Power steering * Electric windows * Central locking with remote control Colqovbn N Do Svtasrb Other dimensions and weights * Payload: 1,450 kg * Permissible total weight: 3,500 kg * Wheelbase: 4,035 mm ----- IVECO CERTIFIED PRE-OWNED STANDARD - The low-cost alternative. - Fluids topped up (except fuel) - Vehicle may show damage - Subject to prior sale - Your contact persons: - Mr. Axel Scheske, Tel. Mr. Luca Netter, Tel. Sales location / Storage location: Daimlerstraße 34, 48432 Rheine

Condition: good (used), Year of construction: 1974, This mixer was designed for intensive mixing and wet granulation of materials such as powder / granulate. Working volume: 63 - 200 liters Total volume: 250 liters Cutter head: 4.9 / 6 kW, speed 1,500 / 3,000 min¹ Mixing tool: 18,5 kW, speed 2 speeds Manufacturer: Lödige Year of construction: 1974 Crslq Sswa Tcfovtajb Floor Space: 200 x 110 x 145 cm

Condition: refurbished (used), Year of construction: 2005, Functionality: fully functional, PFEIFFER VACUUM "DUO 250" 250 m3/h 7.5 kW Used - fresh from the revision Pfeiffer VACCUM DUO 250 Condition: smoked replacement device Manufacturer: Pfeiffer VACUUM Type: DUO 250 Technical data: - 3 phases. - 7.5 kW power. - 960 rpm - Voltage 230/400V - Volume 250 m3/h - Weight 360kg Technical information without guarantee For details, please refer to the type plate - see picture There are other vacuum pumps, vacuum systems, Edwards Booster EH1200 Roots piston vacuum pump for sale Cslq Svtowbaiujaorb

Condition: used, Technical details: sheet width: 250 mm plate thickness: 2 mm number of rolls: 11 straightening feed: 5...30 m/min infeed height: 1250 mm total power requirement: 4,0 kW weight of the machine ca.: 620 kg dimensions of machine: 1,15x1,02x1,5 mm dimensions electric cabinet LxWxH: 0,66x0,53x0,32 m Band Leveling Machine with feed equipment: - sideways band guidance rolls model: - band intake height horizontal:1250mm - tiltable: positiv 30°; negativ 15° Cjlq Svtou Ic Ewoaorb *

Condition: excellent (used), Year of construction: 2019, Functionality: fully functional, Equipment: freezer, lighting, Freezer AHT MIAMI 250 AD (-) / (U) R290 Used machine - very good condition. AD - semi-automatic device de-icing REFRIGERANT - R290 Year of construction: 2015-2017 Cooling: + 3 ° C to + 15 ° C Freezing: -18 ° C to -23 ° C Brilliant AHT LED interior lighting for an even more attractive product presentation Special feature: ready to plug in Freight costs depend on the weight, volume and above all on the distance, the following information is relevant for inquiries: Delivery address (postcode and name of the town), but further details require a telephone call, so we ask you to inquire about transport costs and other delivery modalities to contact us by phone. Our contact details can be found under the legal information of the seller. Payment in cash, possible upon delivery on site. We sell and export worldwide, due to our very large storage capacity we can also deliver larger quantities flexibly and quickly. Celqswcn Ihe Svtasrb Please contact us before purchasing. We issue intra-community invoices - excluding VAT. opening hours Mon-Fri: 8 a.m.-4 p.m. sat .: closed

Condition: used, mileage: 241,242 km, power: 250 kW (339.91 HP), fuel type: diesel, color: yellow, fuel: diesel, gearing type: mechanical, Year of construction: 2005, Transmission: 8 gears, Manual gearbox Year of manufacture: 2005 Drive: Wheel GVW: 19.000 kg CE mark: yes Price: On request Reference number: 65 Volvo FL 250 4x2. Year: 2005. Milage: 241.242 km. Manual gearbox 8 gears. Max weight: 19.000 kg. Axle load: Crslqswazmfe Svtaeb 1: 7500 kg. 2: 12.000 kg. Engine brake. Camera. Electrical operated windows. Sleeper cabin 1 bed. Nightheater. Steelsuspension. Wheelbase: 5000 mm. Tyres: 315/80R22,5 60-80%. Bronto Skylift S46XDT. Year: 2005. Hours: 4442. Hours RPM: 1686. Widened + Rotated basket. Max wind speed: 12,5 m/s. Max permitted tilt: 0.5 degree. Max capacity basket: 600 kg / 7 persons + 40 kg. Max lateral force: 400 N. 4 point outriggers. Airconnection in basket. Max working height: 46 meter. ID NR: 65. The General Terms and Conditions of Heinhuis are applicable to all adverts, offers and quotations by Heinhuis, all agreements entered into by Heinhuis and the negotiations preceding them. By any form of response you accept the applicability of the General Terms and Conditions of Heinhuis and you declare that you have taken note of these General Terms and Conditions. Our prices are export netto prices.

Condition: excellent (used), Year of construction: 2005, operating hours: 82,985 h, clamping force: 250 kN, screw diameter: 18 mm, injection pressure: 2,500 bar, injection weight: 20 g, Arburg 270U-250-70 (221) Description Crelq Svsvu Tlkotajb General information Product Code: (221) Availability: In Stock Year of production: 2005 Brand: Arburg Technical data Shot Weight: 20 g Clamping Force: 250 kN Condition: Used Screw dia: 18 mm Injection pressure: 2500 bar Tie bar distance: 270 x 270 mm Platen size: 380 x 380 mm Mould height min.: 200 mm Type of controls: Selogica Language: German Power:10,7 kW Workinghours: 82.985 h Weight: 2100 kg Dimensions: 3m x 1,1 m Hopper: No Core pull: Yes Euromap: Yes

Condition: new, Year of construction: 2025, total height: 3,700 mm, ram adjustment: 150 mm, installation height: 650 mm, total width: 2,479 mm, total length: 4,186 mm, table length: 2,000 mm, table width: 1,200 mm, conveyor belt width: 350 mm, pressing force: 250 t, ram stroke: 250 mm, table height above floor: 854 mm, distance between side stands: 920 mm, distance between stands: 2,040 mm, overall weight: 31,000 kg, control voltage: 24 V, Standardized 250-ton automatic punching press with fixed stroke at an attractive price. Cost-optimized basic configuration without enclosures or safety gates for use in a soundproof booth. Optional accessories such as safety gates/enclosures, press force measurement, tool change/clamping system, etc. are available. For technical specifications and available accessories, see PDF documents. Cslqewb Dh Is Svtaerb Delivery time: 6 months

Condition: good (used), Year of construction: 1997, Functionality: fully functional, filter area: 22.6 m², volume flow: 3,534 m³/h, overall weight: 630 kg, nominal flow rate: 4,241 m³/h, extraction nozzle diameter: 250 mm, power: 5.5 kW (7.48 HP), HÖCKER POLYTECHNIK VACUMOBIL EA 250-5 including piping and valve Mobile dust extractor Year of manufacture September 1997 Technical specifications Flow rate 4,241 m³/h Intake nozzle 250 mm Filter area 22.6 m² Collection tank 3 Negative pressure 2,740 Pa Tank volume 495 l Main motor 5.5 kW Automatic cleaning Filter category H2 Weight approx. 630 kg Space requirement length 2.6 m Space requirement width 1.25 m Space requirement height 2.5 m Colq Sovzp S Hovtaerb Including piping and valve Inspection/functional test possible at any time by arrangement HolzPraxis Hermann-Pöge-Straße 3, 09120 Chemnitz

Condition: good (used), mileage: 251,340 km, power: 140 kW (190.35 HP), fuel type: diesel, gearing type: automatic, axle configuration: 4x2, wheelbase: 3,430 mm, first registration: 07/2018, loading space length: 1,610 mm, loading space width: 1,420 mm, loading space height: 1,290 mm, emission class: euro6, color: black, driver cabin: day cab, tire size: 245/45R19,0, number of seats: 5, Year of construction: 2018, Equipment: ABS, air conditioning, cruise control, navigation system, traction control, trailer coupling, = Additional Options and Accessories = - Electric Windows - Electric Mirrors - Alloy Wheels - Standard - Partition = Remarks = Number of Axles: 2, Configuration: 4x2, Payload: 840 kg, Unladen Weight: 2360 kg, Gross Weight: 3200 kg, Unbraked Towing Capacity: 750 kg, Braked Center Axle Towing Capacity: 2500 kg, Trailer Hitch, Alloy Wheels, Suspension Type: Coil Spring, Cabin Type: Double Cab, Cruise Control, Air Conditioning, Number of Airbags: 6, Rear Wipers, Parking Assist: Front and Rear, Electric Windows, Electric Mirrors, Partition, GPS Navigation, Color: Black, Metallic, Rear View Camera, Engine Power: 140 kW (188 Hp), Fuel: Diesel, Euro: 6, Drive Technology: Timing Chain, Transmission Type: Automatic, Power Steering, ABS, ASR, Body Type: Extended Roof rack: Standard, Side doors: 2, Side windows: 2, Rear closure: Tail lift, Seats: 5, Seat upholstery: Leather, XL double cabin automatic air conditioning, Spare tire = Further information = General information Number of doors: 2 License plate: VDD-19-S Axle configuration Tire size: 245/45R19.0 Brakes: Disc brakes Suspension: Coil springs Axle 1: Tire profile left: 4 mm; Tire profile right: 4 mm Axle 2: Tire profile left: 4 mm; Right tire tread: 3 mm Dimensions Dimensions (L x W x H): 550 x 190 x 205 cm Weight Curb weight: 2,360 kg Payload: 840 kg GVW: 3,200 kg Functional Loading area height: 54 cm Maintenance General technical inspection (AIT): inspected until August 2025 Creljwaravoq Svtaeb Condition Technical condition: good Visual condition: good Damage: none Number of keys: 2

Condition: ready for operation (used), Functionality: fully functional, Year of construction: 2014, operating hours: 9,600 h, Crawler Excavator Hitachi ZX 250 LCN - 5 2 M 99 2 Buckets Crolowbdryoq Svtaeb Year 2014 9600 H LUBRICATION

Condition: used, mileage: 463,257 km, power: 188 kW (255.61 HP), first registration: 01/2014, overall weight: 18,000 kg, fuel type: diesel, color: white, axle configuration: 2 axles, next inspection (TÜV): 12/2025, gearing type: automatic, emission class: euro6, loading space width: 2,490 mm, loading space length: 7,850 mm, loading space height: 2,290 mm, Equipment: ABS, air conditioning, tail-lift, Refrigerated box body divisible into 3 KAMMER, Carrier Supra 1150 MT refrigeration unit with stationary and mobile cooling Palfinger MBB C2000S tail lift -* Main tank, 300L right * Engine brake * Exterior mirrors, electrically adjustable & heated * Driver's seat, comfort air suspension * Radio * Reversing camera * Double wing doors * Wheelbase 5900 mm Colovfzi Seq Svtasrb * Front air suspension * Rear air suspension -

Condition: ready for operation (used), Jib Crane, Column-Mounted Crane, Column Jib Crane, Crane 250 kg, Used Machine Manufacturer: Abus Load Capacity: 250 kg Crelq Svjv Tiahjtaeb Column Height: 2900 mm Reach: 2600 mm Hoist: Demag, Chain Hoist Type: DKUN 2-250 K V2 Load Capacity: 250 kg Lifting Height: 2600 mm IP Rating: IP 55

Condition: used, mileage: 132,111 km, power: 188 kW (255.61 HP), first registration: 08/2021, fuel type: diesel, color: white, axle configuration: 4x4, tire size: 11 R 22.5, fuel: diesel, brakes: engine braking, gearing type: mechanical, emission class: euro6, suspension: steel, Year of construction: 2021, Equipment: ABS, air conditioning, all wheel drive, crane, cruise control, differential lock, onboard computer, parking heater, traction control, = More options and accessories = Crjljvmgqdjq Svtajb - Airbags - Alarm system - Outside thermometer - Heated exterior mirrors - Passenger seat - Leaf spring suspension - Brake booster - Car kit - Roof hatch - Digital tachograph - Electric windows - Electrically adjustable exterior mirrors - Electronic Braking System (EBS) - High beam - Speed limiter - Rear doors - Air conditioning - Power steering - Metallic paint - Fog lights - Radio/CD player - Reversing camera - Side door - Sunshade - Stability control - Auxiliary heating - Start interrupter - Automatic warm-up - Toolbox - Power take-off (PTO) - Central locking = More information = Drivetrain AdBlue system: Yes Axle configuration Brakes: Disc brakes Suspension: Leaf spring suspension Front axle: Tire size: 11 R 22.5; Differential lock; Max. axle load: 5600 kg; Steered; Tire profile left: 40%; Tire profile right: 40% Rear axle: Tire size: 295/80 R 22.5; Double tires; Differential lock; Max. axle load: 10900 kg; Tire profile left inside: 90%; Tire profile left outside: 90%; Tire profile right inside: 90%; Tire profile right outside: 90%; Reduction: simply reduced Weights Empty weight: 11,930 kg Payload: 6,070 kg GVW: 18,000 kg Functional Crane: PALFINGER PC 3800, built in 2021, at the rear of the chassis CE marking: yes

Condition: used, Year of construction: 1990, Functionality: fully functional, For sale: JÖMA KT 250 industrial finger-wing press. Year of manufacture: 1990. Technical data: • Maximum processing size: 80 mm * 250 mm • Motors: 55 kW, 22 kW Colq Svjvnl I Detaerb • Air pressure requirement: 10 bar / 1000 liter tank • Semi-automatic: milling and pressing are automatic. Glue application is manual. The machine can be viewed in Esztergom, a 60-minute drive from Budapest, in a Hungarian prefabricated house factory. The machine works reliably. Reason for sale: the production of glued laminated timber has stopped in the factory.