Used Cormach 4000 E1 for sale (6,965)

Condition: used, mileage: 260,000 km, power: 265 kW (360.30 HP), first registration: 04/2018, fuel type: diesel, number of seats: 56, gearing type: automatic, emission class: euro6, color: white, brakes: retarder, Equipment: ABS, air conditioning, electronic stability program (ESP), parking heater, * Iveco Crossway LE 14.50 m with 56 seats & 65 standing places - 2 vehicles available * Diesel - 8,710 cc - 265 KW - 360 HP - Euro 6 - Green sticker - TÜV NEW - * 56 passenger seats + 1 driver - 65 standing places - 1 wheelchair space - * Auxiliary heating / radio / ABS / ASR / retarder - double-width door at the rear - single door at the front - * LAWO matrix system - automatic transmission - air conditioning - * Vehicle dimensions: length: 14.0 mm x width: 2,550 mm x height: 3,205 mm Djb E S Sjv El Nisi Ijut * Vehicle 1: KM reading: approx. 115,000 KM - first registered: July 8th, 2022 * Vehicle 2: KM reading: approx. 260,000 KM - first registered: 04/23/2018 * German vehicles - German vehicle registration documents - Vehicles immediately available & ready for use * The vehicle price is per vehicle - Sale is made on behalf of the customer - * Errors / misprints & prior sale reserved * Please make an appointment for viewing & test drive * Contact person: Andreas Vogel * ATTENTION - Vehicles are stored outside - Please ask for exact location - ATTENTION -

Condition: used, Functionality: fully functional, machine/vehicle number: HR35326, Year of construction: 2016, operating hours: 3,440 h, load capacity: 1,400 kg, lifting height: 4,000 mm, free lift: 150 mm, fuel type: electric, mast type: duplex, construction height: 2,150 mm, drive type: Elektro, net weight: 2,560 kg, Electric 3-wheel forklift Djb E Sjv Dn Ulj Si Ijut Chassis number: HR35326 Load centre of gravity: 500 ISO class: ISO class 2 = 1,000 - 2,500 kg Mast type: Duplex Condition: Ready for use and fully functional Technical condition: normal Front tyres type: super elastic Front tyres condition: 40 - 60% Rear tyres type: super elastic Rear tyres condition: 40 - 60% Battery voltage: 48V Battery Ah: 620Ah Description: Further equipment on request Side shift, Front work lights, roof cover, windscreen, half cabin, load protection grille, CE certificate, interior mirror, rotating beacon, windscreen wiper, 3-wheel, seat, Cross lever double pedal

Condition: used, mileage: 673,775 km, power: 130 kW (176.75 HP), fuel type: diesel, gearing type: mechanical, wheelbase: 4,185 mm, overall weight: 7,490 kg, empty load weight: 5,010 kg, maximum load weight: 2,480 kg, first registration: 09/2008, loading space length: 6,070 mm, loading space width: 2,500 mm, loading space height: 2,400 mm, loading space volume: 36 m³, emission class: euro4, color: white, Tare: 5010kg, Allowable total weight: 7490kg, Loadspace (L W H): 6,070 mm x 2,500 mm x 2,400 mm, Loadspace volume: 36 m³, Seats Fabric, BOX+SPONDA Dsb E S Sov Hh Uqji Ijut

Condition: excellent (used), Year of construction: 2003, operating hours: 67,455 h, clamping force: 1,000 kN, screw diameter: 35 mm, injection pressure: 1,865 bar, injection weight: 150 g, DEMAG ERGOTECH- EL-EXIS E 1000/420-310 (130) Year of production: 2003 TECHNICAL DATA Screw Dia [mm]: 35 Shot Weight [g]: 150 Injection Pressure [bar]: 1865 Clamping Force [kN]: 1000 Tie Bar Distance [mm]: 420x420 Platen Size [mm]: 600x600 Mould Height min. [mm]: 200 CONTROL Type of Controls: ERGOcontrol Monitor: Yes Control Cabinet: Yes Language: German OTHER Power [kW]: 46,7 Workinghours [h]: 67455 Dsbjvt Snbj E S Si Ieut Dimensions [m]: 4,6x1,5x2,1 Weight [kg]: 6500 - TOGLLE CALMPING UNIT - CORE PULL - EUROMAP - AIR VALVE

Condition: used, mileage: 2,102 km, power: 20 kW (27.19 HP), gearing type: other, fuel type: electric, color: yellow, overall weight: 3,281 kg, empty load weight: 2,380 kg, maximum load weight: 2,000 kg, first registration: 12/2013, next inspection (TÜV): 07/2025, emission class: none, suspension: other, Year of construction: 2013, operating hours: 2,102 h, total length: 3,930 mm, driver cabin: other, construction height: 2,400 mm, fuel: electricity, The Linde W20 tractor is a used electric tractor that was first registered on December 11, 2013. The vehicle has a mileage of 2,102 km and was previously used by one previous owner. The tractor is yellow and is perfect for commercial use. With a permissible total weight of 3,281 kg and an operating time of 2,102 hours, this model offers reliable and efficient performance for a wide range of transport and logistics tasks. The tractor is ready for use and can be delivered throughout Germany if required (for an additional charge). Only sold to commercial customers (agriculture, freelancers, small and large businesses) or for export. Errors and prior sale reserved. Dueb E Sov Eqdlo Si Ist

Year of construction: 2022, Condition: used, Breite/Länge mm Motor output 4,5 kW m³ Diameter of the motor mm Dimensions (L/W/H) mm Weight 258 kg mm Heating capacity kW Number of ventilators St. Deb Eerk Uz Ee S Si Iout Year 2022

Condition: used, Year of construction: 1983, Technical details: Pressure: 160 t throat: 360 mm max. ram stroke: 500 mm distance table/ram: 800 mm Deb E S Sju Nfvusi Isut clamping plate on table: 1250x630x100 mm passage opening in table: 4x Ø 62mm mm ram speed - forward: 200 mm/s ram speed - reverse: 125 mm/S ram surface area: 450 x 850 mm mortise hole in ram: Ø 49 mm height over floor: 810 mm total power requirement: 17 kW weight of the machine ca.: 7200 kg dimension machine xH: 2,1 x 1,4 x 3,4 m manual counter *

Condition: excellent (used), axle configuration: 3 axles, wheelbase: 10,000 mm, loading space length: 13,600 mm, loading space width: 2,600 mm, first registration: 06/1992, suspension: air, color: orange, tire size: 445/65R22.5, Year of construction: 1992, Equipment: crane, = More options and accessories = - Lift axle = More information = Axle configuration Tyre size: 445/65R22.5 Brakes: Drum brakes Suspension: Air suspension Rear axle 1: Lift axle; Tire profile left: 50%; Tire profile right: 50% Rear axle 2: Tire profile left: 10%; Tire profile right: 10% Rear axle 3: Steered; Tire profile left: 20%; Tire profile right: 20% Dimensions Dimensions (L x W x H): 1380 x 250 x 350 cm Weights Empty weight: 8,750 kg Payload: 30,250 kg GVW: 39,000 kg Functional Crane: KENNIS ROLKRAAN, rear of the chassis Loading area height: 135 cm Condition Djb Eouutbhj S Si Ijut Technical condition: very good Visual condition: very good

Condition: good (used), Year of construction: 2007, Dear Sir or Madam, We are offering you a Unimog U4000 DoKa expedition vehicle on behalf of a customer. Data U4000: First registered: November 28th, 2007 Power: 160KW/218 HP Mileage: 106400 KM Registration: Motorhome, 7.5t Equipment: -Tire pressure control system -Rockinger ring hitch small + fold-out ball head - 3500Kg -End cross member for increased trailer load -Air conditioning on the roof -2nd tank with clock -Rear-mounted gearbox with working group -EAS Automatic Shift -Driver and passenger seats with air suspension -Radio -Electric windows -Radio -Hutchinson Bead Lock rim WA 1016 -Koni shock absorbers -and much more Body equipment: -Diesel heater -Double bed -Refrigerator with freezer compartment -Solar system Duob E S Ssvdttmsi Ijt -Gas stove -Water tank -Water heater and much more If you have any questions, we are of course happy to help! We are selling this vehicle on behalf of someone else. This is a private sale and therefore excludes any warranty or guarantee.

Condition: used, Year of construction: 2005, 1 used crankshaft milling device in very good condition for mounting e.g. on a lathe for milling crankshafts or other milling work Make: SEMA, Origin Austria Model: SE 100 Year of manufacture: 2005 Technical data: Spindle holder ISO 50, concentricity / test mandrel L=300 mm = 0.01 mm Speed range, infinitely variable, currently set to 2,000 rpm Spindle is designed for up to 3,000 rpm Drive power currently 15 kW The milling spindle is designed for up to 25 kW Bearing diameter 110 mm The 2 screwed-on adapter plates under the milling spindle are each screwed on. These plates can be used for your lathe, reworked or may have to be newly manufactured. Screw-on surface of the milling spindle: L x W: 490 x 250 mm Accessories / special features: Milling spindle: - The milling spindle is mounted on the face support of your lathe - Infinitely variable speed adjustment, LENZE frequency converter, designed for up to 30 KW - Clockwise / counter-clockwise rotation - Lifetime lubricated spindle bearings - Sturdy construction with hardened and ground spindle - High precision - Spindle with 2 bearings and 5 spindle bearings - Tool tightening via a threaded spindle - Mobile carriage with control panel - Emergency stop - Lockable main switch Drive gear for the main spindle: Dueb E Soddziys Si Ist - A long drive rod is mounted in the spindle bore and connected to the gearbox - Infinitely variable speed adjustment, LENZE frequency converter - Clockwise / counterclockwise rotation - Jog mode Fast / slow The pictures show this unit mounted on a SARO SPA 10 x 3000 universal lathe for milling crankshafts. This lathe is not included in the scope of delivery! Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 D - 44143 Dortmund - Wambel

Condition: used, mileage: 16,971 km, power: 137 kW (186.27 HP), fuel type: diesel, gearing type: automatic, overall weight: 7,490 kg, first registration: 11/2014, next inspection (TÜV): 02/2025, emission class: euro6, number of seats: 3, Equipment: ABS, air conditioning, central locking, crane, Very well maintained IVECO Eurocargo 120E18 with Fassi F50A . 3x hydraulic extensions up to 11 m, as well as a cable winch. The vehicle has only 16,971 km - Fassi F50A 0.23 - Working height 11 m - Lateral outreach - 2,00 m ? 2,165 kg - 2,30 m ? 1,865 kg - 3,70 m ? 1,195 kg - 5.05 m ? 855 kg - 6,40 m ? 630 kg - 7,75 m ? 480 kg - Optional 1x mechanical extensions - 9,10 m ? 340 kg - 2-fold support - Cable winch - Case with workshop extension - Platform 2,490 length x 2360 width x 600 height - Leaf suspension / air suspension - automatic - Trailer coupling Dusbovhy H Is E S Si Ijt - Multifunction steering wheel - Diff lock - Air conditioning - E windows - EURO 6 - Driving school pedal right - Unladen weight 6,920 kg - GVW. 11,990 kg - unloaded to 7,490 kg - Financing available through our partner banks, we will be happy to help you. We expressly reserve the right to prior sale, as we also offer this item on other portals. Accessories without guarantee. Changes, prior sale or errors excepted. We offer and strongly recommend a viewing and inspection to ensure that the buyer has no misconceptions about the condition and suitability of the item. Viewings and inspections are possible at any time by appointment and are expressly desired.

Year of construction: 2004, Condition: not inspected (used), Gas furnace Duebev Edxpe E S Si Iot Gross volume 1120 liters Max. 1320°C Nominal heat output 80kW Liquid gas Number of burners 4

Year of construction: 2005, Condition: used, SECOND-HAND FILTERING PLANT OMAR MOD. LE 110046 - CE RULES Complete with: Dsb Eer Ilzij S Si Isut - Fan - Filter omar impianti cm 440x240 h=700 - Aut. loading valve - Fire control system with aut. shutdown water device - Motor hp 60 mion - Capacity approx. 30.000 mc/h - Year 2005

Condition: new, Year of construction: 2024, carrying capacity per cantilever arm: 500 kg, shelf height: 3,200 mm, total length: 2,100 mm, axle spacing: 1,000 mm, total height: 3,200 mm, load capacity per stand: 2,500 kg, Cantilever rack in hot-dip galvanized design: Scope of delivery: 3 rack stands, height 3.2 m with base section, 1.8 m usable depth (2 m total depth) 12 cantilevers with 1.8 m usable depth (for chipboard with approx. 2.1 m depth) Longitudinal and diagonal struts for 4 m rack length (distance 1.3 m) Fastening material (screws, nuts and washers) Net price: €2,490.00 plus VAT Detailed description: - Stable steel construction made of IPE profiles (screw system) - Rack height 3,200 mm - Load capacity per stand 2,500 kg - Base section and cantilevers with 1,800 mm usable depth Dueb E Sjqt Dmye Si Ist - (for 2,100 mm chipboard depth) - Cantilevers height adjustable in 100 mm increments - 4 screwable screws per stand Cantilever arms, standard (= 5 storage levels) - Load capacity per cantilever arm 500 kg - Including longitudinal and diagonal braces for 1,000 mm spacing - Shelf length = 2,100 mm - Including fastening material (without ground anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Made in Germany - Short delivery time Our cantilever racks are produced exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. Delivery for stock items can take place in approx. 1 week after receipt of the order. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: used, Functionality: fully functional, machine/vehicle number: H2XX386H01653, Year of construction: 2017, operating hours: 11,602 h, load capacity: 1,600 kg, lifting height: 4,560 mm, free lift: 1,400 mm, fuel type: electric, mast type: triplex, construction height: 2,200 mm, fork carriage width: 1,150 mm, fork length: 1,000 mm, total length: 2,100 mm, drive type: Elektro, construction width: 1,150 mm, net weight: 3,759 kg, Electric 4-wheel forklift truck Fahrgestellnummer: H2XX386H01653 Load center: 500 Fork width: 100 mm Fork thickness: 40 mm ISO class: Pin type Mast type: Triplex Condition: Ready for use and fully functional Duob E Seuh Awws Si Iet Technical condition: Very good Front tires type: Superelastic Front tires Size: 180/70-8 Front tires Condition: 20 - 40% Rear tires Type: Superelastik Rear tires Size: 150/75-8 Rear tires Condition: 20 - 40% Battery Volt: 48V Battery Ah: 700Ah Battery type: PzS Battery year of construction: 2017 Battery condition: 20 - 40% Description: Device is sold in good working condition without valid UVV test. Video: Fork positioner, Sideshifter is present, but not connected. Installation with extra switch costs 900 EUR. 3rd valve, rear working lights, front working lights, roof cover,

Condition: used, Year of construction: 2006, SEMA SE 100 milling spindle unit, e.g. for the production of crankshafts Spindle holder flange Speed with this gearbox 97 rpm Spindle is designed for up to 3000 rpm Drive power, currently 22 kW The milling spindle is designed for up to 25 kW Bearing diameter 110 mm Disc milling cutter SANDVIK Ø 700 x 25 mm Immersion depth of the disc cutter 235 mm Accessories / Special features: - Side milling cutter SANDVIK Ø 700 x 25 mm - Lubricated-for-life spindle bearings - Sturdy construction with hardened and ground spindle - High precision - Spindle with 2 bearings and 5 spindle bearings - Tool tightening via flange New price at the time: approx. 34,500.00 € net Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 D - 44143 Dortmund - Wambel Dueb E Seddzi Aj Si Ist

Condition: new, Functionality: fully functional, mileage: 30 km, power: 132 kW (179.47 HP), fuel type: diesel, gearing type: mechanical, overall weight: 3,500 kg, empty load weight: 2,500 kg, maximum load weight: 1,000 kg, first registration: 09/2024, next inspection (TÜV): 09/2026, loading space length: 4,900 mm, loading space width: 2,200 mm, loading space height: 2,300 mm, fuel tank capacity: 85 l, emission class: euro6, number of seats: 3, number of previous owners: 1, Year of construction: 2024, Equipment: ABS, additional headlights, air conditioning, airbag, cruise control, electronic stability program (ESP), fog lights, immobilizer system, onboard computer, power assisted steering, spoiler, summer tires, truck registration, EU - vehicle with guarantee. Flatbed tarpaulin with spoiler Loading space length 4900 mm Loading space width 2200 mm Loading space height 2300 mm Sliding tarpaulin on the right Roof spoiler Euro pallet spaces - 10 Payload approx. 1000 kg Fastening rails on the side Air conditioning - automatic climate control Car radio HI-CONNECT Bluetooth Radio remote control on the steering wheel Leather steering wheel Comfortable driver's seat Armrest 3-seater Fog lights with cornering lights Cruise control 85l tank Dsb E Ssv Haq De Si Ijut Reinforced suspension Fog lights with cornering lights Central locking with remote control Electrically adjustable and heated exterior mirrors LED daytime running lights Spare wheel Delivery, leasing or financing possible. Available in approx. 1-2 weeks. - Contact us: - Irenäus Wardenga (DE)

Condition: new, overall weight: 1,600 kg, 1.5 horse trailer with front exit from Cheval Liberte model TOURING-ONE. High entrance door, beautiful design, aerodynamic, various poly colors, high aluminum walls and aluminum floor. A horse transporter for a horse or mare with foal and outstanding driving characteristics! The aluminum horse trailer is equipped with a Pullman 2 chassis, which was developed by ChevalLiberte. 35cm high entrance, independent wheel suspension, longitudinal control arm, coil spring and shock absorber offer excellent driving comfort. Dujbsv A Twis E S Si Ijt The flat ramp can also be opened as a door, which makes the horse transport trailer a universal trailer for loading pallets, cleaning the interior better or loading the horses more stress-free and with fewer injuries without slipping. The equipment of the two-horse trailer offers a front exit, poly hood in 5 different colors, high aluminum walls, aluminum floor, high entrance door, flap/door system, Pullman2 chassis, 100 km/h, interior light, automatic support wheel, four sliding windows, stable frame, V-drawbar and so on. You can find all the equipment below. Horse trailer accessories such as tie brackets, feed buckets, weather protection hood, drawbar hood, anti-theft device, 2600 kg GVW, aluminum rims and scratching mats are also available. The structure is splash-proof.

Condition: new, Functionality: fully functional, Panasonic NE-1840 - 44 liter, 2-level interior with removable intermediate shelf, electromechanical control, LCD display, professional microwave device, 4 pcs 450W magnetrons; 4 power levels 1800W; 900W; 340W and 170W when melting. Device internal dimensions GN1/1: 535*330*250 mm, 60-minute timer with internal lighting, ceramic base plate, stainless steel casing inside and out, downward-opening stainless steel framed door. Last piece, in unopened packaging. Dusb E Ssv Irhqo Si Ist

Condition: like new (used), Year of construction: 2024, Cantilever rack double-sided used: Hot-dip galvanized screw system Scope of delivery: 4 double-sided shelf uprights, height 3,500 mm with foot parts each 1,200 mm 24 cantilevers with 1,200 mm depth, standard Including longitudinal and diagonal braces for 1,300 mm axle spacing Incl. fastening material (without ground anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Also available in larger quantities: 20 uprights in stock) Detailed description: Debomkixwe E S Si Ijut - Stable steel construction made of IPE profiles - Surface of all components hot-dip galvanized - Load capacity per upright side 2,250 kg - Load capacity per cantilever arm 750 kg - Cantilever arms height adjustable in 100 mm increments - 6 screwable cantilevers per upright and 2 foot parts with a depth of 1,200 mm, standard = 4 storage levels one above the other per stand side - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - Collection on site possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2021, Cement screw conveyor WAM Diameter: 219 mm. Length: 10,275 mm. Made of spiral and steel tube. 11 kw 290 rpm. Siemens geared motor, directly connected to the axle. Production: 60 T/h. Dusb E S Soucpfwji Iot Condition as new, hardly used

Year of construction: 1971, Condition: used, machine/vehicle number: WE4 4800, Tractive force: 500 kg Tractive force in the top rope layer: 475 kg Rope-Ø: 10 mm electr. connection: 380 V Dueb Eeb H Ip To S Si Ijt Motor power at 40% ED: 5,3 PS Space requirement: 500 x 750 x 470 mm Weight: 250 kg without pull rope

Condition: like new (used), Year of construction: 2024, Cantilever rack double-sided used: Hot-dip galvanized screw system Scope of delivery: 4 double-sided shelf stands, height 4,160 mm with foot section 1,200 mm 24 cantilevers with 1,200 mm depth, standard Including longitudinal and diagonal braces for 1,300 mm axle spacing Incl. fastening material (without ground anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Also available in larger quantities: 20 stands in stock) Detailed description: - Stable steel construction made of IPE profiles - Surface of all components hot-dip galvanized - Load capacity per stand side 2,250 kg - Load capacity per cantilever arm 750 kg - Cantilever arms height adjustable in 100 mm increments - 6 screwable cantilever arms per stand and 2 base sections with a depth of 1,200 mm, standard = 4 storage levels one above the other per side of the stand - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Expert advice by telephone Dusb E S Seh Ek Daoi Ijt - Made in Germany - Short delivery time - Collection on site possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Year of construction: 1970, Condition: used, machine/vehicle number: 12901, drilling capacity steel/GG: 50/60 mm spindle taper: 5 MK arm length: 400 mm table size: 700 x 600 mm spindle sleeve stroke: 275 mm spindle turning speed range: 32 - 1030 rpm carriages: 4: 0,1 - 0,4 mm Dusb E S Siey R Thj Ist engine: 380 V, 2,2/3,7 kW space needed: 700 x 1200 x 2700 mm weight: 1240 kg

Condition: as good as new (ex-display), Year of construction: 2024, Cantilever rack in painted version (RAL 7016 anthracite): Scope of delivery: 4 shelf uprights height 2.56 m with base section 1.0 m usable depth (1.2 m total depth) 12 cantilever arms with 1.0 m usable depth Longitudinal and diagonal braces for 4 m shelf length (spacing 1.3 m) Fastening material (screws, nuts and washers) (*No paint damage!) Net price on collection: € 1,490.00 plus VAT. Delivery possible for an additional charge Detailed description: - Sturdy steel construction made of IPE profiles (screw system) - Surface painted in RAL 7016 (anthracite) - Shelf height 2,560 mm - Load capacity per upright 1,800 kg - Foot section and cantilever arms with 1,000 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 screw-on cantilever arms per upright, standard (= 4 storage levels) Dobeguk A Hs E S Si Iout - Load capacity per cantilever arm 600 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Shelf length = 4,000 mm - Including fixing material (without floor anchors) - With assembly instructions and load plates C4 according to DIN standard - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with notification prior to delivery. The material is sensibly packed to enable easy unloading. The substrate must be made of concrete, be level and suitable for dowels and be able to bear the acting loads. The customer is responsible for checking and ensuring the ground conditions and load-bearing capacity as well as any official approvals required. The shelf stands must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the employers' liability insurance association, it is recommended that the uprights on the uppermost storage level protrude at least 500 mm from the top edge of the uprights.