Used Barford Sxr 7000 for sale (1,262)

Condition: used, Year of construction: 2025, The KMK 106-MTF Automatic Foil Stamping and Die Cutting Machine, manufactured in 2024, is currently in a print shop and located in Germany. This new machine handles formats ranging from a minimum of 450 x 370 mm to a maximum of 1060 x 770 mm. Weighing 17,000 kg, the machine features three longitudinal and two transverse foil pull shafts, with a maximum sheet size of 1060 x 770 mm and a minimum sheet size of 450 x 370 mm. The overall dimensions of the machine are 6050 x 4200 x 2260 mm, and it supports a maximum die-cutting size of 1050 x 750 mm. The machine has a gripper margin of 8-17 mm and a maximum stack height of 1350 mm. It includes 12 individually heatable zones, each adjustable up to 200????C, and a main motor power of 11 kW. The maximum embossing size is 1050 x 750 mm, with a maximum stack height of 1200 mm and a maximum longitudinal foil diameter of 250 mm. The machine comes with a 2-year warranty and includes installation. Additional features include an air requirement of 0.6 MPa and a flow rate of over 0.37 m????/min, a maximum mechanical speed of 7500 sheets per hour, and a maximum cutting force of 300 tons. It can handle paper weights ranging from 90 to 2000 g/m???? for cardboard, 0.1 to 2 mm for cardboard, and up to 4 mm for corrugated board. The delivery terms are FCA, with an estimated delivery time of 8-12 weeks after ordering. The maximum embossing speed is 6500 sheets per hour. Format: 1060 x 770 mm 450 x 370 mm Equipment: 8-12 weeks after ordering 2 year guarantee + installation Condition New machine Max. sheet size: 1060x770mm Min. sheet size: 450x370mm cutting size: 1050x750mm mping size : 1050x750mm Gripper margin: 8-17mm Paper range: 90-2000g/m2(cardboard) 0.1-2mm(cardboard) =4mm(corrugated) Maximum cutting force: 300 T Cob Eyjvfxvpj Rcqsgt Max. mechanical speed: 7500 s/h mping speed: 6500 s/h Foil pulling shafts,longitudinal 3,transversal 2 Zones individually heated: 12 heating zones ( each zone can be adjusted independently, max 200 Max. foil longitudinal diameter: 250mm ivery pile height: 1200mm ding pile height : 1350mm Main motor power: 11 kW Machine power: 46kw Machine weight: 17000kg Air requirements: 0.6Mpa, >0.37m3/min Overall machine dimensions: 6050x4200x2260mm

Condition: used, mileage: 137,000 km, power: 294 kW (399.73 HP), overall weight: 26,000 kg, fuel type: diesel, gearing type: mechanical, emission class: euro4, first registration: 06/2007, Equipment: ABS, all wheel drive, crane, electronic stability program (ESP), MAN TGA 26.400 EZ: 06/2007 ONLY 137000 km 6X4 ... 6x2 plus Hydrodrive Euro 4 !!!! TÜV NEW !!!! 3rd axle Steering and lift axle Cgobjvm N Sds Ey Rcqet Crane: MKG MK 300 L 30 meter crane Cable winch Radio 4x hydra extension + 2x mech extension Tel: We are happy to take care of your financing or leasing Sale EU: net after presentation of company documents and tax/VAT number VAT deposit 2000 ¤ we speek english govorimo srpsko-hrvatski our service for you: - Customs license plates - Export documents and EUR1 - Transportation worldwide - Overnight accommodation - Transfer from Munich airport or Passau train station Tel:

Condition: used, mileage: 34,700 km, power: 177 kW (240.65 HP), overall weight: 16,000 kg, fuel type: diesel, color: red, axle configuration: 4x4, maximum load weight: 4,035 kg, empty load weight: 11,965 kg, wheelbase: 3,900 mm, driver cabin: day cab, gearing type: mechanical, emission class: euro1, suspension: steel, first registration: 02/1990, Equipment: ABS, all wheel drive, compressor, crane, differential lock, trailer coupling, MAN F90 16.242 FA 4X4 Ex- fire brigade/ recovery vehicle D.O.T.: 2/ 1990 Original only 34,700KM/ 2960 hours with receipts short driver's cab with 3 seats 4X4 all-wheel drive vehicle 16 speed manual gearbox leaf suspension trailer coupling Wheelbase 3900mm Cgeb Eysvikwto Rcqet 6 cylinder engine with 11967ccm displacement Tires 11R22.5 profile approx. 80% Strong cable winch at the rear with 5,000 kg pulling force Various stowage/ roller shutter boxes Unladen weight 11.965Kg Crane Palfinger PK7000 with cable winch 2.00m/ 3160Kg 3.60m/ 1800Kg 5.40m/ 1170Kg 7.20m/ 870Kg 9.20m/ 630Kg 11.20m/ 450Kg The vehicle has always stood in the fire brigade/recovery service hall and is in a well-kept condition. Export/ net price: 25.900 Euro All information without guarantee, errors excepted.

Condition: ready for operation (used), Year of construction: 2000, General Data Measurements width 2700 Measurements depth 3000 Measurements height 2700 Machine weight 7000 Control Unit Model OSP U10M Brand OKUMA Main Drive Spindle speed range 12000 Tool taper ISO 50 - BT Movement X-Axis Movement 1050 mm X-Axis Rapid Traverse 20 m/min Y-Axis Movement 560 mm Y-Axis Rapid Traverse 20 m/min Z-Axis Movement 450 mm Cjb Ey Rcourn E Aoqogt Z-Axis Rapid Traverse 15 m/min Table Outer length 1300 mm Outer width 560 mm Table load 700 kg Additional Equipment Swarf conveyor Portable handwheel High pressure coolant This 3-axis Okuma MX-55VB vertical machining centre was manufactured in 2000. It features a robust 1300 x 560 table, high-speed spindle up to 12000 rpm, and a chain-type tool magazine with 20 positions. Equipped with the OSP U10M control unit, it ensures precision and efficiency. Ideal for handling loads up to 700 Kg, it includes accessories like a swarf conveyor and high-pressure coolant system. For more information about this vertical machining centre, please reach out to us. Application Types Milling

Condition: good (used), mileage: 658,598 km, power: 345 kW (469.07 HP), first registration: 02/2018, fuel type: diesel, color: white, axle configuration: 6x2, tire size: 315/70R22,5, fuel: diesel, wheelbase: 4,100 mm, brakes: retarder, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: steel-air, Year of construction: 2018, Equipment: ABS, air conditioning, cruise control, parking heater, sleeping cabin, traction control, = Additional Options and Accessories = - Digital Tachograph - Tachograph (Control Unit) - Fixed - Hydraulic System - Alloy Wheels - Power Take-Off - Pump - Sleeper Cab - Additional Braking System = Remarks = Number of axles: 3, Configuration: 6x2, Tare weight: 8771 kg, Gross weight: 27000 kg, Total fuel capacity: 550 liters, Fifth wheel height: 112 cm, Fifth wheel: Fixed, Number of locks: 1, Alloy wheels, Suspension type: Air suspension, Cabin type: Sleeper cab, Cruise control, Tachograph (Control Unit), Digital Tachograph, Air conditioning, Auxiliary heating, Color: White, Engine power: 345 kW (463 Hp), Euro: 6, Transmission type: I-Shift, Gears: 12, Additional braking system, Retarder Brand: Voith, Power steering, ABS, ASR, Hydraulic system, power take-off, pump, ADR EX/II EX/III FL AT VALID 10-2025 / 6X2 TWIN STEER / ALCOA'S = Further information = Transmission Transmission: 12-speed, automatic Axle configuration Tire size: 315/70R22.5 Brakes: Disc brakes Axle 1: Steered; Left tire profile: 9 mm; Right tire profile: 11 mm; Suspension: Leaf springs Axle 2: Lift axle; Steered; Left tire profile: 5 mm; Right tire profile: 10 mm; Suspension: Air suspension Axle 3: Twin tires; Left tire profile inside: 15 mm; Left tire profile outside: 15 mm; Right tire profile inside: 15 mm; Right tire profile outside: 16 mm; Suspension: Air suspension Dimensions Dimensions (L x W x H): 654 x 255 x 353 cm Weight Curb weight: 8,771 kg Payload: 18,229 kg GVW: 27,000 kg Functional Pump: Yes Condition Technical condition: Good Visual condition: Good Damage: None Number of keys: 3 Identification License plate: KLEYN1 = Company information = Kleyn Trucks is one of the world's largest independent dealers of used vehicles. Here you can choose from a constantly changing inventory of 1,200 used trucks, tractors, and trailers. Our selection includes all European brands, model years, and price ranges. Why buy from Kleyn Trucks? Simple! • Large, rapidly changing market Cgjb Eyovx I Tko Rcqet • Recognizable quality • A good price • Competent sales team • We speak many languages • We understand our customers • Import and transport support • (Export) license plates are quickly arranged • Expert technical services • The security of "recognizable quality" • And more... Please visit our website for special offers and a complete inventory: Leasing through Kleyn Trucks is possible in most European countries! Quickly calculate your leasing rate and submit an inquiry via our website. Inquire directly about our European warranty package.

Condition: used, Year of construction: 1996, color: white, overall weight: 16,000 kg, maximum load weight: 13,540 kg, empty load weight: 2,460 kg, loading space volume: 43 m³, loading space width: 2,480 mm, loading space length: 7,000 mm, loading space height: 2,460 mm, GERMAN DEALER offers: BDF steel swap body 16000 kg GG 2460 kg empty Craneable Rolling door Telescopic supports Year of manufacture 1996 Wooden floor Dry and tight Inside: 7000x2480x2460 mm = 43m³ Many swap bodies and carriages are in stock! ##### DELIVERY IS POSSIBLE THROUGHOUT GERMANY! MEPO-NUTZFAHRZEUGE HAS BEEN DELIVERIES SINCE 1983! VIEWINGS ONLY BY APPOINTMENT! ##### Cgob Ey Rowg Rtuscqet

Condition: good (used), Year of construction: 2008, Functionality: fully functional, GENERAL Project No: 905673 Quantity: 1 pc. Manufacturer: SW (Schwäbische Werkzeugmaschinen) Type: BA W04-22 Control: Siemens 840 D Year of Manufacture: 2008 Condition: Used Machine Shifts approx.: 2-3 shift DESCRIPTION MILLING Travel in X 400 mm Travel in Y 500 (775) mm Travel in Z 425 mm Max. rapid traverse in X/Y/Z 100/100/100 m/min Max. acceleration in X/Y/Z 14/14/20 m/s2 Feed force X/Y/Z 10000/10000/2×5000 N Linear glass scales X/Y/Z/A(U)/C1(C2)/W1(W2) Linear drive X/Y/Z Tool taper HSK-A 63 Max. speed milling spindle 17500 1/min Max. power at 10-40/100% duty ratio 35/26 kW Max. torque at 10-40/100% duty ratio 80/60 Nm Spindle diameter in front bearing 80 mm 2 pc. Horizontal milling spindle Spindle distance 400 mm Air-monitored tool clamping Pneumatic tool taper cleaning in milling spindle Torque support for multi spindle drilling heads Chain-type tool magazine 2×60 stations Max. tool diameter 80 mm Max. tool diameter without adjacent tools 160 mm Max. tool length 300 mm Max. workpiece weight 10 kg Chip-to-chip time 2,75 s Pallet changer 2 fold Max. workpiece weight per pallet 450 kg 2 pc. Swivel unit for clamping bridge Swivel unit NC-controlled 4 pcs. Rotary table NC-controlled (5th axis) – 2 pcs. per swivel unit Bridge dimensions 1030 mm Workpiece swing diameter 550 mm 2 Clamping bridge supports Hydraulic clamping 250 bar 4 pcs. Additional clamping circuit Air-monitored clamping of workpiece FURTHER EQUIPMENT IR-measuring probe Fully enclosed work area Automatic sliding door for loading area Light in working area Oil-/emulsion mist extraction unit Scraper-type chip conveyor Discharge hight chip conveyor 1200 mm Machine operates/operated with emulsion Internal coolant supply Flush gun Coolant unit with paperband filter High pressure pump 70 bar Modem for remote diagnosis and TeleService Tapping without compensation chuck Cgjbju Diats Ey Rcqjt Additional control panel for tool management Warning lamp GENERAL TECHNICAL DATA Air supply 6 bar Operating voltage 3×400/50 V/Hz Total power requirement 133 kVA Transport dimensions of the machine (LxWxH) approx. 3680x5100x3250 mm Space requirement of the whole equipement (LxWxH) approx. 4350x7000x3100 mm Machine weight approx. 14500 kg REMARKS We described the specified product as accurate as possible. As it is not a product manufactured by us, the mentioned data can deviate. Herewith, we point out that the mentioned data are are non-binding and ask you to check them during your inspection.

Condition: used, power: 127 kW (172.67 HP), color: orange, operation weight: 16,700 kg, Year of construction: 1978, Equipment: cabin, Power/Engine: 10,500 cm³ Chassis: Wheels Driver's Seat: Cabin Attachments: Shovel ID: 117995 Ready for immediate use 173 HP 6 Cylinders 17000 Kg Video link on YouTube: We always have a large selection of used vehicles in stock. You can find more of our selection at Non-binding offer, sale to businesses only, errors and prior sale excepted. Advertisements and company logos on vehicles may have been digitally edited in photos. Cgeb Ey Rjv S Nrzecqet

Condition: used, Year of construction: 1991, Table dimensions 1200 x 730 mm Motor output 4 kW Spindle length 180 mm table height 920 mm spindle stroke 260 mm Weight 580 kg Spindle speed 3000/4500/6000/7000/10000 rpm Cob Ey Rcowbi H Aoqegt Max. table protrusion: 230 mm Max. dimensions of the tools that can be lowered under the table: 320 x 90 mm

Condition: ready for operation (used), Year of construction: 1998, General Data Measurements width 2620mm Measurements depth 2025mm Measurements height 2670mm Cgeb Ey Rov Sfyhecqst Control Unit Brand OKUMA Model OSP7000M-H Main Drive Spindle speed range 8000 RPM Number of axis 5 Movement X-Axis Movement 560 mm Y-Axis Movement 450 mm Z-Axis Movement 450 mm Tools Number of index 30 This 5-axis Okuma VH-40 vertical machining center was manufactured in 1998. Ideal for complex and precise machining tasks, it offers enhanced flexibility and productivity for your workshop. Consider the opportunity to buy this Okuma VH-40 vertical machining center. Contact us for more information. Application Types Milling

Condition: used, Year of construction: 2010, Serial number: SZFTN1490ALD0xxxx Please contact ATS Norway AS for more information Please provide reference number upon request: 19807 Specifications: - Eu-approved until 30.06.2025 - 3 axles - Lift on 1 and 3 - Air suspension - Ok tires - Internal length: Approx. 7.2-3 m - Frame set - Tool cabinet - Ready for delivery Description: 3 axles Istrail Plankjärre from 2009. Eu-approved and ready for delivery. Sold with frame set Technical approved: Yes EU-approved until: 30.06.2025 Own weight: 5760 Total Weight: 27000 Payload: 21240 Width: 255 Length: 1000 Inside lenght: 725 Cgsb Ey Rcev U Sfpeqot

Condition: used, Year of construction: 2011, operating hours: 835 h, filter area: 80 m², suction capacity: 7,000 m³/h, Dust extraction, welding fume extraction, self-cleaning, pneumatic, vacuum filter for continuous operation. For plasma, laser, sandblasting, soda blasting and all types of dry dust. Brand: DEBUS / PIONIER Model: DES DZF-1 The fan is placed behind the filter on the clean side, which reduces the risk of explosion to a minimum. Filter inserts cleaned pneumatically with compressed air pulses during operation, which ensures high efficiency of the device. The device is in very good technical condition - only 835 hours worked year of production: 2011 Fan with a power of 5.5 kW. + noise silencer Efficiency up to 7000m3/h Filtration area - 80 m2 Connector diameter 300 mm Filter cartridges - 4 pcs. Electrical documentation available Unit dimensions: Cebewdg Txj Ey Rcqegt height - 3.40m total width: 1.40m x 1.40m stock no.: 0977

Condition: new, Year of construction: 2024, Agricultural trailer carried in the tractor • Dimensions 7000 x 2500mm • Tear plate loading floor, floor height 1040mm • Load capacity 12 tons • Tyres 500/50/17 (940mm high, 490mm wide) • All axles air braked Cgjb Ey Rjwful Sscqjt • Sprung • 50mm towing eye fixed • Towing height 900 mm • Towing eye length 1400 mm • Width lighting (LED) • Protected lighting (LED) • Side marker lighting (LED) • 2 work lights behind the rear wheels • 2 flashers on the back of the trailer • Both sides 12 holes for tension straps • At the back a hot-rolled U profile for ramps • 2 separate ramps 400mm wide (max 6000 kg) • Gutter under the vehicle where the ramps can be placed • 4x twistlocks in the vehicle for a 20ft container • All ironwork hot-dip galvanized • RDW approved 40kmh Condition: New Year of construction: 2024

Condition: used, Year of construction: 1983, overall weight: 70,000 kg, power: 55 kW (74.78 HP), ELECTRICAL SPECIFICATIONS .. total power consumption: 55 kW DIMENSIONS / WEIGHTS .. total weight approx.: 70000 kg Maximum wall thicknesses: Material up to approx. 450 N/mm² max. 22mm (steel) Material up to approx. 750 N/mm² max. 17.5mm (stainless steel) Maximum diameter : dished end approx. 5000 mm Basket arch bottom approx. 3200 mm Minimum diameter : dished end approx. 1200 mm Corner radius : Range 150 - 500 mm Largest corner radius 500 mm Clear width clamping bracket approx. 5800 mm Csb Ey Rcsurcdmoqegt Max. Sheet thickness clamping approx. 32 mm Electrical power : Main drive approx. 55KW Shifting drive approx. 1,5/9 KW Hydraulic unit approx. 11 KW additional pressure roller drive approx. 7,5 KW Accessories : Push rollers additional drive 2 lateral pressure rollers Form roller change console Central lubrication Clamping device oL 5033 Included : Tools for flanging : 1 piece standard flanging roller 4 pieces cast iron flanging rollers R85, R125, R150, R175 7 flanging rollers made of 1.2379 R225, R250, R300, R350, R400, R450, R500 New spare parts : New clamping plate bearing New threaded spindle with nut New form roller shaft

Condition: like new (used), Year of construction: 2021, operating hours: 300 h, Prices against bid XG x 2800 5x Ca E200L 4x CA Dc 40 e System was only used for 90 days as good as new The XG-X2800LJ is a 2D/3D laser profile sensor from the LJ-V7000 series from KEYENCE Germany. This advanced vision system offers advanced features and flexibility for demanding inspection applications. Here is some important information about the XG-X2800LJ: Technical specifications: Laser scanner / profile measurement: the XG-X2800LJ is specifically designed for profile measurement and 2D/3D image processing. Cgjb Ey Rsr Rddzecqet Compatibility: It is compatible with line scan cameras, LJ-V sensors and 21 megapixel cameras12. Flowchart style programming: The XG-X is designed for advanced users and allows flowchart style programming3. Manuals and software: User manuals and software are available for configuration and customization via PC as well as remote control and capture of images and results on a PC4. Please note that the accessories shown are for illustrative purposes only and may not be included with the product. For more information, please visit the official KEYENCE website.1 If you have any further questions or need support, please do not hesitate to contact me! 😊

Condition: used, Year of construction: 2023, Used machine Year of manufacture 2023 Technical specifications: Roller carriage length 3200 mm Roller carriage cutting length 3200 mm Cutting height at 90° max. 155 mm at 46° max. 105 mm Cutting width at the width stop 1250 mm Length stop on the cross slide extendable up to 3500 mm Saw blade diameter max. 450 mm Saw blade diameter (retractable under table) ø 400 mm Cgob Ey Rcouvab Roqot Table size cast iron table top 1200 x 655 mm Table extension plus 750 x 655 mm Table widening 1430 x 940 mm Table height / working height +/- 20 mm 900 mm Motor power 5.5 kW / 7.5 HP Main saw blade speed 3000 / 4000 / 5000 / 6000 rpm Voltage 400 V / 50 Hz Space requirement 7000 x 3500 mm Weight approx. 1150 kg Options: 7.5 kW motor Tele-Digit length stop With central digital, wireless 0.1 mm readout in the low-power system for both stop flaps up to 3000 mm instead of the standard length stop Double-sided miter stop DSG A For angle cuts 0° - 90° on the aluminum sliding table, length and angle measurements adjustable via scale; For cutting to lengths up to 1375 mm with length compensation for preferred angles of 5°, 10°, 15°, 22.5°, 30°, 45°, 60°, and 67.5°. Includes splinter wood, wall mount, and an additional factor scale for easily calculating incorrect miters for different workpiece widths. Swivel device for the cross slide. Quick, ergonomic sliding into the parking position. 2 clamps for trolleys. Current list price: €46,254.- Availability: Short-term. Warehouse location: Hochheim.

Condition: used, Year of construction: 2011, Serial number: YG9SBB4384P03xxxx Please contact ATS Norway AS for more information Please provide reference number upon request: 20054 Specifications: EU approval: Comes with new EU approval Model year: 2011 Mileage: Approx. 735,000 km Transmission type: Automatic Tires: See pictures Crane: FTG V13 crane from 2017 Support legs: Yes Weight: 14,950 kg Euro 5 engine Length: 1027 cm Width: 255 cm Wheelbase: 450/136 cm Curb weight: 14,950 kg Drivetrain: 6x4 Power: 730 hp Equipment: Sand spreaders Tool cabinet Trailer hitch 2 x compressor horns Extra lights Lightbar Refrigerator Bed Csb Eev U Svnoy Rcqsgt Radio/CD Air conditioning/AC _____ Description: Scania R730 timber truck from 2011, equipped with FTG V13 crane from 2017. The truck has only had one owner and full service history is available from Scania. It comes with new EU approval before sale. Can be delivered at short notice. See video for more information. _____ Technical approved: Yes EU-approved until: 30.09.2025 Own weight: 7160 Total Weight: 27000 Payload: 11975 Width: 255 Length: 1027

Condition: new, Year of construction: 2025, Table milling machine minimax tw 45c With aluminum sliding carriage and swiveling milling spindle - high performance for a low investment Item number 5502045 Brand Ceb Ey Rcshp Rcyoqjgt Holzkraft / SCM TECHNICAL DATA Dimensions and weights weight (net) ca. 290kg Connection suction suction connection diameter 2 x 120mm Working table Working table length 1000mm Sliding carriage length 1000mm working table width 435mm sliding carriage width 270mm table height 900mm Installation information Space requirement length 1945mm machine body width/depth 710mm Space requirement width/depth 2220mm Working area length 1600mm Explanation of space requirements The dimensions take into account maximum travels or useful lengths. Working area Width/depth 1600mm Machine body Length 1000mm Explanation Working area Please add the dimensions given with the space requirement to obtain the free installation area recommended for the machine. Electrical data Supply voltage 400V Power drive motor 5,0kW Mains frequency 50Hz Milling spindle Spindle inclination 0 to -45° Spindle speed(s) 3500/7000/10000min¯¹ Useful length of spindle 100mm Spindle mandrel diameter 30mm spindle protrusion max. over table 130mm Milling tool diameter max. Tool diameter max. lowerable 180mm Tool diameter max. tenon milling 275mm tool diameter max. profile milling 210mm SUPPLY Arch milling protection hood Anodized aluminum sliding carriage Telescopic miter fence Aluminum stop jaws

Condition: excellent (used), LINE (year 2024) for transporting, assembling and pressing furniture carcasses. Composed by: A) Motorised belt for transporting and assembling furniture (length mm 2500) B) Clamping Pressing machine Mod. WEPRESS TWIN EP 8. 2, with motorised belt conveyor, furniture diemensions - Min/Max length: mm 250 /2500 - Min/Max depth: mm 300 /820 - Min/Max height: mm 250 / 1200 C) Turning device (0°-180°) Automatic (motorised belt) length mm 1800 + flaps D) Motorised conveyor belt (length mm 2500) E) Motorised conveyor belt (slow speed) length mm 7000, for insertion of drawers, corners (protections), cartons (packaging) F) Motorised conveyor belt (length mm 5000) G) Motorised conveyor belt (length mm 2500) H) System Mod. SILVERPACK 150 LIGHT - S self-dimensioning system for automatic closing (lower and upper) of cardboard boxes. Complete with lower and upper, self-adjusting (with adhesive tape) TAPER. Maximum useful dimensions (external box) mm 1530 x 820 x 1350 (H) and Minimum useful dimensions (external box) mm 300 x 160 x 160 (H) I) 90° Transfer (with rollers and 6 belts) for the outfeed of packed products (mm 1600 x 850 x 700H) Cgeb Eswcn Hdey Rcqet L) Inclined conveyor with idle rollers for the accumulation of packed furniture (mm 6000 x 800 x 450H)

Condition: used, axle configuration: 3 axles, wheelbase: 7,460 mm, first registration: 09/2007, suspension: air, color: other, tire size: 385/65, Year of construction: 2007, Equipment: ABS, = Additional options and accessories = - Air Suspension - BPW Axles - Drum brakes = More information = Axle configuration Tyre size: 385/65 Brakes: drum brakes Suspension: air suspension Rear axle 1: Lift axle; Max. axle load: 9000 kg; Make axles: BPW; Tyre profile: 30% Rear axle 2: Max. axle load: 9000 kg; Make axles: BPW; Tyre profile: 30% Rear axle 3: Max. axle load: 9000 kg Measures Dimensions (LxW): 929 x 247 cm Weights Empty weight: 3.983 kg Carrying capacity: 37.017 kg GVW: 41.000 kg Identification Registration number: OJ-16-YP Cob Eewfrndjy Rcqogt Serial number: XL9620000070002489

Condition: excellent (used), Functionality: fully functional, mileage: 37,000 km, power: 80 kW (108.77 HP), fuel type: electric, overall weight: 2,240 kg, maximum load weight: 667 kg, first registration: 09/2018, color: white, number of seats: 2, number of previous owners: 1, Year of construction: 2018, Equipment: ABS, air conditioning, airbag, central locking, electronic stability program (ESP), fog lights, immobilizer system, navigation system, onboard computer, parking sensors, sliding door, traction control, truck registration, NISSAN eNV200 FULL ELECTRIC ZERO EMISSIONS YEAR 2018 WITH 37000 KM SINGLE OWNER WITH NAVIGATOR / REAR VIEW CAMERA / CAR RADIO WITH BLUETOOTH / V.E / C.C / WITH INTERNAL SHELVING AND PARCEL RACK WITH LADDER HOLDER Cgeb Ey Rcowg Ry Ioqet

Condition: new, SJ6032, 70006459765,3M BUMPON Elastic Buffer Model: SJ6032 Type: 70006459765 Cgobeq S Tg Aj Ey Rcqjt Condition: New

Condition: used, mileage: 470,000 km, Year of construction: 2010, Serial number: YV2AG40D6BA70xxxx Please contact ATS Norway AS for more information Please provide reference number upon request: 19130 Specifications: Model year: 2010 Mileage: Approx. 470,000 km Cgsb Ey Rcevyfw Asqjt Transmission: I-Shift Tires: See pictures Length: 845 cm Width: 250 cm Wheelbase: 460/136 cm Curb weight: 13,050 kg Axle configuration: 6x4 Horsepower: 551 hp Tool cabinet: Yes Compressor horn: Yes Rotor lamp: Yes Trailer hitch: Yes Rear view camera: Yes Damage: Small dent behind the cabin, shown in pictures Bed: Yes Radio/CD: Yes Climate/AC: Yes Description: Volvo FH540 asphalt truck from 2010, in good condition and ready for delivery. It has 470,000 km, I-Shift transmission system, 551 hp and is equipped with, among other things, a tool cabinet, compressor horn, rotor lamp, reversing camera, trailer hitch and climate/AC. Small dent behind the cabin, shown in the pictures. Ready for quick delivery. Km: 470000 HK: 550 Technical approved: Yes EU-approved until: 22.01.2026 Own weight: 13050

Condition: used, mileage: 396,000 km, Year of construction: 2011, Serial number: XLEP6X2000527xxxx Please contact ATS Norway AS for more information Please provide reference number upon request: 19984 Specifications: - Km: Approx. 396,000 - Transmission: Automatic - Okay tires - Air suspension - Euro 5, 400 hp - Engine brake - 6x2, Turn 3 - Ekopres Medium XL construction - Rotor beam - Tool cabinet - Rear view camera - 1 chamber - Weight - Radio/CD - Air conditioning/AC - Videos - Ready for delivery Description: Scania P280 4x2 Compactor truck. 6x2 with Ekopres Medium XL on construction. The truck has been maintained. Ready for delivery. Km: 396000 HK: 399 Technical approved: Yes Cjb Eysv U S E Ns Rcqegt EU-approved until: 13.11.2025 Own weight: 16200 Total Weight: 27000 Payload: 10725 Width: 255 Length: 924 Euro: 5 Gearbox: Automatic

Condition: used, mileage: 497,000 km, Year of construction: 2021, Field of application: Freight transport Serial number: YS2R6X2000217xxxx Please contact ATS Norway AS for more information Please provide reference number upon request: 19968 Specifications: - Km: Approx. 497,000 (will increase) - Transmission: Automatic - Suspension:  Air - Euro 6, 540 hp - Retarder - 6x2 Cgeb Eyov U R Rko Rcqst - On-Spot - Stiholt construction - Okay tires - Michelin guys - Rotor lamp - Extra lights - Compressor horn - LED light - Bed - Refrigerator - Radio/CD - Air conditioning/AC - Ready for delivery Description: Nice Scania R540 Truck from 2021. Well equipped and ready for delivery. Km: 497000 HK: 539 Technical approved: Yes EU-approved until: 18.03.2026 Own weight: 9820 Total Weight: 28000 Payload: 18180 Width: 255 Length: 729 Euro: 6 Gearbox: Automatic