Used Barford Sx 8000 for sale (3,228)

Year of construction: 2014, operating hours: 8,000 h, Condition: excellent (used), Functionality: fully functional, smartTec reflow oven eXelsius XRC8 Year of manufacture 2014 Pin chain transport Grid transport Automatic width adjustment Nitrogen 8 heating zones 2 cooling zones 8000 operating hours Incl. monitor, computer, software, exhaust air Duob Hhovq Igbow Rdjt Dimensions 5425x1400x1500mm

Condition: good (used), mileage: 554,000 km, power: 338.33 kW (460.00 HP), first registration: 10/2017, overall weight: 18,000 kg, fuel type: diesel, color: red, axle configuration: 4x2, Year of construction: 2017, Equipment: ABS, additional headlights, air conditioning, airbag, cruise control, differential lock, low noise, navigation system, onboard computer, parking heater, sleeping cabin, soot filter, spoiler, traction control, VEHICLE IN EXCELLENT CONDITION WITH CHECKED BEME TYRES MODEL XP VARIOUS ACCESSORIES AVAILABLE Dusb Hovwcdbehw Rdjt

Year of construction: 2010, Condition: used, Year of manufacture: Nov 2010 New: No Dueb Hevbg Ryjhw Rdst Serial number: N05H064172 Not tested. No guarantee. Please contact us if you can't find what you are looking for.

Condition: used, Year of construction: 2011, operating hours: 11,000 h, Functionality: fully functional, machine/vehicle number: 1008570, pressure (max.): 8 bar, Equipment: type plate available, Kaeser SX6 Well maintained bj. 2011 4.0kw 8 bar 11.000 Hours Made in Germany Dobou Rruye Hhw Rdout

Condition: excellent (used), Year of construction: 2004, Functionality: fully functional, machine/vehicle number: 60460, back gauge: 1,250 mm, sheet thickness steel (max.): 20 mm, overall weight: 26,000 kg, Equipment: documentation/manual, finger protection, HACO PSX 3020 In very good condition. Cylinders are still being overhauled Control SC 100 is about 2 years old Working length: 3050 mm Capacity regular steel: 20 mm (400 N/MM2) Back gauge length: 1250 mm Control: SC 100 motorized backgauge with digital display Equipped with discharge conveyor Finger protection by means of light curtain Deb Hhou Sqlmow Rdjut Cutting clearance: automatic Condition of blades: good Minimum cutting angle: 0.5 Maximum cutting angle: 3 Number of holders: 18 Length and number of plate holders: 8x 500 mm side stop 3000mm Equipped with high maintenance device: No Strokes per minute at lowest angle: 22 Strokes per minute at largest angle: 11 Working height: 1030mm Engine power: 56.0 KW Overall length: approx 4100mm Overall height: approx. 2650mm Overall width: 2460mm Weight approx. 26,000kg Serial No.: 60460 Year of construction: 2004

Condition: new, Board stacker BSx2 with pure mechanical stacker arms or pneumatic rotatable. With steel or plastic chain. Infeed sever conveyor, zero set rollers or without them. We have all that options. Specification: 1. Feed (machine) speed: 9 layer/min. 2. Lift capacity: 3 tons. 3. Step rate: 17 m/min. 4. Package size: 1200x1200x5000 mm. 5. Feed conveyor type: steel chain (plastic- optional). 6. Options: infeed belt conveyor. 7. Motor (Lift): 3 kW, 230/400 V, 50 Hz, with brake. 8. Motor (forks): 1,5 kW, 230/400 V, 50 Hz, with brake. Dsb Hhwoiyztzs Rdeut 9. Motor (conv.): 1,1 kW, 230/400 V, 50 Hz, with brake. 10. Motor (positioner): 1,1kW, 230/400 V, 50 Hz. 11. Air consumption: 7 L/min (6 bar). For more options or information, feel free to contact us!

Condition: new, cutting diameter 250 mm capacity 90 degrees: flat 280 x 220 mm capacity 90 degrees: square 220 x 220 mm vice 285 mm turning speed range: 36/72 m/min dimensions of saw-band 2950x27x0,9 mm Dsb Hhefg E H Ssw Rdsut total power requirement 1,5 / 1,8 kW weight of the machine ca. 485 kg dimensions of the machine ca. 1700 x 1000 x 1800 mm Electro-hydraulic semi-automatic band saw SHARK 282 SXI EVO with semi-automatic-dynamic, manual function, has a MEP-28 control for miter cuts from 45° right to 60° left. Semi-automatic function: At the start of the cycle: - Vice closes and motor starts – Saw head lowers for the cut – Motor switches off – Saw head rises – Vise opens. Semi-automatic dynamic system (manual lowering of the saw band bow up to to the desired position and cycle start via the manual button.) Some features: New centralized control console on an articulated arm to allow the operator can be easily switched from any working position. Low voltage control panel: Polyester membrane keyboard with thermoformed highlighted Push buttons and actuation control signal. Display to show: * Diagnostics (messages in the user language) * Alarms (description of alarm causes) * State of inputs and outputs * Counting cuts * Time taken for the cut made * Current consumption of the saw blade motor * Saw blade tension * Blade speed * Numerical display of head position. Switch handle IP55 of manual 24V cycle. Complete program of all special cutting cycles. Identification of other possible special cutting cycles for special ones Applications New, latest generation hydraulic control unit, extremely powerful and with low energy consumption. Large work surface with turntable on roller bearings, measuring 265 mm preloaded thrust bearing, mounted. Double belt speed (36/72 m/min.) with control Intended to accommodate an electronic inverter for the Continuous regulation of the belt speed from 20 to 90 m/min. Stroke of the saw bow can be programmed directly from the control panel Adaptation to the cutting material. Clamping device can be moved laterally to the left and right Quick release vice. Manually operated strap tension control with display on the screen electronic converter. Base frame with pull-out coolant tray. Electric coolant pump for cooling and lubricating the saw band. Preparation for installing the minimum blade lubrication kit (Optional), in addition to the conventional standard lubrication Emulsion oil. Chip clearing brush. The machine is intended for pallet truck transport. Length stop for cuts of the same length Material support arm with roller for attaching the loading platform Bimetal saw band for solid and profile material. Tools and instructions for use in the respective user language.

Condition: excellent (used), mileage: 356,000 km, power: 353.04 kW (480.00 HP), first registration: 12/2020, fuel type: diesel, color: white, maximum load weight: 18,000 kg, fuel: diesel, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, Year of construction: 2020, Equipment: ABS, air conditioning, airbag, cruise control, differential lock, low noise, navigation system, onboard computer, parking heater, sleeping cabin, soot filter, spoiler, traction control, VEHICLE IN EXCELLENT CONDITIONS SINGLE OWNER UNIFORM TYRES SPOILERS ON CABIN AND SIDES WEBASTO FRIDGE CRUISE REGULATOR RETARDER ABS ASR Dusbsvwcacs Hhw Rdjt

Condition: used, Year of construction: 1998, Spritzgießmaschine, Fabr. Stork, Typ SX-N 6600-5600, Bj 1998, SN X66503, Schließkraft 6.600 kN, Holmabstand horizontal/vertikal 900/900 mm, Aufspannplatte horizontal/vertikal 1.350/4.440 mm, Formeinbauhöhe max./min. 900/300 mm, Formöffnungsweg 940 mm, Werkzeuggesamtgewicht max. 8.600 kg, Zentrierung DS/AS 200/125 mm, Traversengewinde M20, Spritzdruck 21.000 N/cm², Spritzvolumen 2.494 cm³, Schnecken-Ø 84 mm, Kaskade 4-fach, Kernzüge FAP/BAP 2/1, Heizkreise Ma/PSG 8/0, Anschlussleistung 330 kW, Maschinengewicht 34.300 kg, Steuerung, Fabr. Stork, Type CDS500, Linear-Entnahmeroboter, Fabr. Engel, Type ERC 84/1-E, Bj. 2003, SN 97607 Duob Hhw Rouw Uqdedet

Condition: new, Year of construction: 2024, Functionality: fully functional, Baty Venture Plus XT - High-precision multi-sensor measuring system for very large workpieces The Baty Venture Plus XT is a sophisticated multi-sensor measuring system specially developed for the inspection of very large and complex workpieces. It offers outstanding precision and flexibility for companies that need to perform demanding quality checks. The robust design, combined with state-of-the-art CNC control and Fusion 3D software, enables automated and repeatable measurements on a large scale. Available models: VP-80100-CNC-XT With a measuring range of 800 mm x 1000 mm x 460 mm, this model offers the perfect solution for large workpieces. The combination of optical and tactile measurements enables precise data acquisition. The model is ideal for applications where medium to large components need to be measured efficiently and accurately. VP-80160-CNC-XT This variant has an extended measuring range of 800 mm x 1600 mm x 460 mm, making it ideal for longer and more complex workpieces. With the integrated 6.5:1 zoom optics and programmable LED lighting, this model offers high flexibility for the precise inspection of workpieces of different sizes. Dujbsuyh Tkj Hhw Rdjt VP-100120-CNC-XT This model has a measuring range of 1000 mm x 1200 mm x 750 mm and is perfect for very large workpieces. The sturdy aluminum construction and the air bearing axes ensure maximum accuracy, even with heavier workpieces. The fully automatic CNC control and the user-friendly Fusion 3D software make it quick and easy to create inspection programs. VP-100200-CNC-XT With an impressive measuring range of 1000 mm x 2000 mm x 750 mm, this is the largest variant of the Venture Plus XT available. This model is designed for the inspection of extremely large components and offers maximum precision and flexibility. Thanks to the Fusion 3D software, CAD import/export and DXF overlays can also be used with this variant to perform complex measurements. Common functions: Multi-sensor technology: Combination of non-contact optical measurements and tactile measurements for comprehensive data acquisition and maximum precision. CNC control: Enables the creation of fully automated programs for repeatable and time-saving inspections. Fusion 3D software: Supports CAD import/export, DXF overlays and the creation of detailed reports with statistical process control (SPC). Programmable LED illumination: Provides optimal illumination of the workpiece to improve edge detection and measurement accuracy. Zoom optics: 6.5:1 zoom optics, optionally expandable to 12:1, offers maximum flexibility for different measuring requirements. The Baty Venture Plus XT is the ideal solution for companies that require a flexible and precise inspection solution for large to very large workpieces. It offers the necessary precision and efficiency to meet even the most demanding production requirements

Condition: new, DEMAG frequency inverter with resistor unit - 2 pieces 1 type - ACS800 04M-0140-3+D150+E210+H355+H356+H360 Duob Hhw Rju Uvi Tjdst with resistor unit ( new ). 2 Type - ACS800 04M-0210-3+D150+E210+H355+H362+N672 with resistor unit ( used ).

Condition: new, Board stacker BSx1 with pure mechanical stacker arms or pneumatic rotatable. With steel or plastic chain. Infeed sever conveyor, zero set rollers or without them. We have all that options. Specification: 1. Feed (machine) speed: 9 layer/min. 2. Lift capacity: 3 tons. 3. Step rate: 17 m/min. 4. Package size: 1200x1200x5000 mm. Dob Hhwsiyztws Rdout 5. Feed conveyor type: steel chain (plastic- optional). 6. Options: infeed belt conveyor. 7. Motor (Lift): 3 kW, 230/400 V, 50 Hz, with brake. 8. Motor (forks): 1,5 kW, 230/400 V, 50 Hz, with brake. 9. Motor (conv.): 1,1 kW, 230/400 V, 50 Hz, with brake. 10. Motor (positioner): 1,1kW, 230/400 V, 50 Hz. 11. Air consumption: 7 l/min. For more options or information, feel free to contact us!

Condition: new, cutting diameter 280 mm capacity 90 degrees: flat 380 x 260 mm capacity 90 degrees: square 260 x 260 mm turning speed range: 40 / 80 m/min dimensions of saw-band 3440 x 27 x 0,9 mm engine output 1,5 / 1,8 kW weight 670 kg Electro-hydraulic, semi-automatic band saw with additional manual and semi-automatic-dynamic function, for cuts from 45° right to 60° left. Some features: Dusb Hhw Rofg E Iajdet Pivoting control panel on vertical post. 420 mm large rotary table on roller bearings with preloaded thrust bearing and replaceable steel inserts. Double belt speed (40/80 m/min.)

Condition: new, overall weight: 2,700 kg, empty load weight: 520 kg, maximum load weight: 2,180 kg, loading space length: 4,050 mm, loading space width: 2,000 mm, tire size: 185/60R12, Car transporter from the manufacturer ANSSEMS model MSX2700 405x200 BASIC. As standard equipment, the Anssems car trailer has a wooden floor, lashing eyes on the outside of the frame, aluminum drive-on rails that can be inserted under the loading area, low chassis, stable welded steel frame, support wheel and a V-drawbar. Deb Hsrxu Uwohw Rdsut We also offer accessories for Anssems car transport trailers such as a high tarpaulin, side wall attachment, wheel stopper, rear support set, tool box, car lashing straps and anti-theft device.

Condition: ready for operation (used), Year of construction: 2013, Inverter was removed from a working plant and exchanged for a larger one! Without RDCU, without control panel, Dusbenkaqde Hhw Rdst Sold without warranty and guarantee. Ready for shipment immediately!

Condition: new, cutting diameter 330 mm capacity 90 degrees: flat 510 x 320 mm capacity 90 degrees: square 320 x 320 mm turning speed range: 40 / 80 m/min dimensions of saw-band 3440 x 27 x 0,9 mm engine output 1,5 / 1,8 kW weight 670 kg Dsb Hefg E Ibshw Rdout Semi-automatic, electro-hydraulic band saw machine for cutting 60° left to 60° right. Versatile machine with a tape of 4640 x 34 x 1.1 mm for the Cutting pipes, profiles and beams up to a maximum cutting range from 510x320 mm to 0°. The control console on a swiveling arm allows for comfortable and safe operation from any position. Electronic inverter for continuous belt speed regulation from 15 to 100 m/min. Large turntable with a diameter of 280 mm and engraved exact fine scaling, easily adjustable and stored.

Condition: new, overall weight: 3,000 kg, empty load weight: 540 kg, maximum load weight: 2,460 kg, loading space length: 4,050 mm, loading space width: 2,000 mm, tire size: 195/55R10C, Alufelgen, Felge schwarz, Car transporter from the manufacturer ANSSEMS model MSX3000 405x200 Go-Getter. As standard equipment, the Anssems car trailer has an aluminum floor, side edge profile in black, aluminum rims in black, LED lighting, storage box, lashing eyes on the outside of the frame, aluminum drive-on rails can be inserted under the loading area, low chassis, stable welded steel frame, support wheel and a V-drawbar. We also offer accessories for Anssems car transport trailers such as high tarpaulin, side wall attachment, wheel stopper, rear support set, car lashing straps and anti-theft device. Dsb Hhw Rsq Rfl Tsdeut

Condition: new, cutting diameter 250 mm capacity 90 degrees: flat 280 x 220 mm capacity 90 degrees: square 220 x 220 mm turning speed range: 36 / 72 m/min dimensions of saw-band 2950 x 25,4 x 0,9 mm weight of the machine ca. 0,4 t Dimensions (LxWxH) 1,5 x 0,9 x 1,5 Semi-automatic function: Vice closes and motor starts, saw head lowers for the cut, motor switches off, saw head rises, Vise opens. Some features: New centralized switch console on an articulated arm. Latest generation hydraulic control unit, highly powerful and Dujb Hhw Rjfg E H Rjdjt with low energy consumption. Base frame with pull-out coolant container. The machine complies in all areas CE regulations!

Condition: used, overall weight: 1,350 kg, empty load weight: 300 kg, maximum load weight: 1,050 kg, loading space length: 2,510 mm, loading space width: 1,300 mm, loading space height: 1,500 mm, tire size: 195/70r14c, Sturdy braked low loader with high tarpaulin from the manufacturer ANSSEMS model BSX1350 251x130. The standard equipment of the Anssems tarpaulin trailer with brake includes aluminum side walls, tarpaulin and bows, internal locks, external lashing eyes, profile channels for attaching accessories or load securing, very stable welded steel frame, side railing, front high frame, front flap, pull-out supports for tailgate, support wheel and a V-drawbar. We also offer accessories for Anssems car trailers such as flat tarpaulin, net hooks, corrugated grid attachment, side wall attachment, rear support set, tool box, lashing eyes, lashing straps and lock. --- You can also find all our low-cost offers on our homepage Djb Hhw Regf Nxzjdjut Germany-wide delivery (except islands) possible! for the prices. --- PKW-Anhänger-Center Ahrens Moordeicher Landstraße 37 28816 Stuhr near Bremen Tel: 0 Fax: Pick-up times: Monday - Friday - o'clock Saturday is not possible!

Condition: new, cutting diameter 300 mm capacity 90 degrees: flat 330 x 260 mm capacity 90 degrees: square 260 x 260 mm capacity 45 degrees: flat 270 x 200 mm capacity 45 degrees: round 260 mm capacity 45 degrees: square 250 x 250 mm capacity 60 degrees: flat 170 x 170 mm capacity 60 degrees: square 170 x 170 mm capacity 60 degrees: round 180 mm turning speed range: 40 / 80 m/min dimensions of saw-band 3320 x 27 x 0,9 mm engine output 1,5 / 1,8 kW weight 670 kg Electro-hydraulic semi-automatic band saw SHARK 332 SXI EVO with semi-automatic-dynamic, manual function, has a MEP-28 control for miter cuts from 45° right to 60° left. Some features: New centralized switch console on an articulated arm. Low voltage control panel: Polyester membrane keyboard with thermoformed highlighted Push buttons and actuation control signal. Display to show: * Diagnostics (messages in the user language) * Alarms (description of alarm causes) * State of inputs and outputs * Counting cuts * Time taken for the cut made * Current consumption of the saw blade motor * Saw blade tension * Blade speed * Numerical display of head position. Switch handle IP55 of manual 24V cycle. Complete program of all special cutting cycles. Identification of other possible special cutting cycles for special ones Applications New, latest generation hydraulic control unit, extremely powerful and with low energy consumption. Turntable (on roller bearings of 420 mm with preloaded thrust bearings assembled). Double belt speed (40/80 m/min.) with control Intended to accommodate an electronic inverter for the Continuous regulation of the belt speed from 20 to 90 m/min. Stroke of the saw bow can be programmed directly from the control panel Adaptation to the cutting material. Clamping device can be moved laterally to the left and right Quick release vice. Manually operated strap tension control with display on the screen Dujb Hhefg E H Ujw Rdet electronic converter. Base designed to completely contain the coolant, even with maximum angle cuts. The coolant pan (provided with an electric pump for lubrication and Cooling of the saw band) and the chip drawer (can be replaced by a Chip conveyor to be replaced - see special accessories) are in the base frame built-in. Preparation for installing the minimum blade lubrication kit (Optional, in addition to the conventional standard lubrication with emulsion oil. Chip clearing brush. The machine is intended for pallet truck transport. Adjustable length stop for cuts of the same length Material support arm with roller for attaching the loading platform Bimetal saw band for solid and profile material. Tools and instructions for use in the respective user language.

Condition: new, overall weight: 2,500 kg, empty load weight: 410 kg, maximum load weight: 2,090 kg, loading space length: 3,010 mm, loading space width: 1,500 mm, loading space height: 350 mm, tire size: 185/70R13, Sturdy braked low-loader with tandem axle from the manufacturer ANSSEMS model BSX2500 301x150. As standard equipment, the Anssems box trailer with brake has aluminum side walls, internal locks, external lashing eyes, profile channels for mounting accessories or load securing, very stable welded steel frame, railing on the side, front high frame, front flap, pull-out supports for tailgate, support wheel and a V-drawbar. Dujb Hhsrz Rydjw Rdst We also offer accessories for Anssems car trailers such as tarpaulin and frame, flat tarpaulin, net hooks, grid attachment, side wall attachment, rear support set, tool box, lashing eyes, straps and lock.

Condition: new, overall weight: 3,000 kg, empty load weight: 770 kg, maximum load weight: 2,230 kg, loading space length: 3,050 mm, loading space width: 1,780 mm, loading space height: 850 mm, tire size: 185/60R12, Felge schwarz, Three-way tipper with attachment from the manufacturer ANSSEMS model KSX3000 305x178E Go-Getter. The standard equipment of the Anssems tipper includes a steel floor, swinging and removable corrugated grid attachment, lashing eyes on the outside of the frame and inside, black rims, black aluminum side walls, all folding and removable, LED lighting, storage box, electric hydraulics with battery and cable remote control, drive-on rail shaft (rails at extra charge), sturdy welded steel frame, support wheel and a V-drawbar. Dusb Hhoq Rfn Ssw Rdjt We also offer accessories for Anssems tipper trailers with grid attachment such as flat tarpaulin, ramps, support set, lashing straps, net hooks, trailer net and anti-theft device.

Condition: new, overall weight: 3,000 kg, empty load weight: 770 kg, maximum load weight: 2,230 kg, loading space length: 3,050 mm, loading space width: 1,780 mm, loading space height: 300 mm, tire size: 185/60R12, Felge schwarz, Three-way tipper from the manufacturer ANSSEMS model KSX3000 305x178E Go-Getter. Dsb Hhw Rsq Rfnkodout The standard equipment of the Anssems tipper includes a steel floor, lashing eyes on the outside of the frame and inside, black rims, black aluminum drop sides all foldable and removable, LED lighting, storage box, electric hydraulics with battery and cable remote control, drive-on rail shaft (rails at an extra charge), sturdy welded steel frame, support wheel and a V-drawbar. We also offer accessories for Anssems tipping trailers such as high tarpaulin, side wall attachment, grid attachment, wheel stopper, support set, lashing straps, nets and anti-theft devices.

Condition: new, overall weight: 2,500 kg, empty load weight: 490 kg, maximum load weight: 2,500 kg, loading space length: 4,050 mm, loading space width: 1,780 mm, loading space height: 300 mm, tire size: 185/70R13, Felge schwarz, High loader tandem from the manufacturer ANSSEMS model PSX2500 405x178 Go-Getter. Dujb Heq Rfk Dshw Rdst The standard equipment of the Anssems flatbed high loader with brake includes aluminum drop sides, all folding and removable, stable eccentric locks, lashing eyes on the outside and inside, profile channels for mounting accessories or load securing, very stable welded steel frame, pull-out supports for tailgate, support wheel and a V-drawbar. We also offer accessories for Anssems car trailers such as high tarpaulin, flat tarpaulin, net hooks, grid attachment, side wall attachment, rear support set, accessory box, straps and anti-theft device.

Condition: new, overall weight: 2,000 kg, empty load weight: 490 kg, maximum load weight: 1,510 kg, loading space length: 4,050 mm, loading space width: 1,780 mm, loading space height: 300 mm, tire size: 155R13, Felge schwarz, High loader tandem from the manufacturer ANSSEMS model PSX2000 405x178 Go-Getter. The standard equipment of the Anssems flatbed high loader with brake includes black aluminum side panels, all foldable and removable, black rims, storage box, LED lighting, sturdy eccentric locks, lashing eyes on the outside and inside, profile channels for attaching accessories or load securing, very stable welded steel frame, pull-out supports for tailgate, support wheel and a V-drawbar. Deb Hhjq Rfkcow Rdjut We also offer accessories for Anssems car trailers such as high tarpaulin, flat tarpaulin, net hooks, grid attachment, side wall attachment, rear support set, belts and anti-theft device.