Used Gesan Dvs 140 for sale (8,822)

Year of construction: 2018, Condition: used, plate thickness 1,2 mm Csberaqhxs Exni Rsgt roll diameter 62 mm throat 100 mm weight of the machine ca. 50 kg dimensions of the machine ca. 560 x 220 x 500 mm

Condition: new, sheet width 1250 mm plate thickness 5.5 mm pre-bending 5.0 mm roll diam. toproll 140 mm min. dia. 210 mm turning speeds 5.7 U/min engine output 2.2 kW weight 1365 kg range L-W-H 2020 x 900 x 1.200 mm Furnishing: - Robust electro-mechanical bending machine - 2x central rollers driven by an electric motor (top and bottom roller) - Top roller can be swiveled out manually, with folding bearing - including conical bending device - freely movable control panel - Lower roller manually adjustable, by hand wheel - asymmetrical roller arrangement - self-braking main motor - Safety device (safety line with switch unit) - CE mark/Declaration of Conformity Special equipment included in the price: - hardened rollers Ceb Esu Sa Udoxni Rjgt - Motorized side roller adjustment - Digital position display for motor-driven adjustable side roller

Condition: used, Year of construction: 2009, operating hours: 2,500 h, Functionality: fully functional, overall weight: 1,300 kg, load capacity: 100 kg, arm reach: 2,800 mm, Equipment: documentation/manual, - Kuka industrial robot with a horizontal rotary table (fully integrated into the KUKA controller as the 7th axis) Ceb Exnievvygko Rjgt - has only 2500 operating hours, has only been used for occasional tests over the last 7 years.

Condition: used, Radial fan, dust extraction fan, fan, extraction, dust blower, blower, exhaust fan, low pressure radial fan -Manufacturer: Dietz, low-pressure radial fan type DN 14 -Motor: Dietz 0.45 kW 2880 rpm -Volume flow: 19 m³/min -Connection: inlet Ø 130 mm -Connection: Output 110 x 110 mm -Protection class: IP56 Csb Eeuncwxexni Regt -Dimensions: 380/300/H295mm -Weight: 15.4 kg

Condition: used, Running gear, jockey wheel, load wheel tandem, load rollers, steering roller, support roller -Manufacturer: Jungheinrich, swivel wheel from electric pallet truck EJE-KmS 16G-24-140-56 Csb Exsizuf Ueni Rsgt -Wheel size: Ø 96 mm / 100/40-75 -Dimensions: see photos -Number: 2x support roller available -Price per piece -Dimensions: 250/120/H135 mm -Weight: 5 kg/pc.

Condition: used, Forklift bucket, hydraulic forklift bucket, light material bucket, tipping bucket, container tipping device, forklift tines, forklift forks, fork tines Cgjb Exetvb D Rsni Rjt -Forklift tines: 2 pieces/1 pair -Length: 1120mm -Cross section: 140 x 60 mm -Recording: see photos -Dimensions each: 1220/140/H620 mm -Total weight: 210 kg

Condition: used, Forklift bucket, hydraulic forklift bucket, light material bucket, tipping bucket, container tipping device, forklift tines, forklift forks, fork tines -Forklift tines: 2 pieces/1 pair -Length: 935mm Cgeb Eetvb Egjxni Rst -Cross section: 140 x 50 mm -Recording: see photos -Dimensions each: 1040/140/H660 mm -Total weight: 156 kg

Condition: used, Year of construction: 2013, Conveyor belt, belt conveyor, transport belt, belt conveyor, belt conveyor, flat belt conveyor Csb Exstp Rfpeni Rjgt -Manufacturer: MTF, belt conveyor on solid base frame, height adjustable -Type: GL-HM 140 -Speed: 9 m/min -Belt width: 275 mm -Conveyor length: 3000 mm -Drive: ATB 0.18 kW, see photo type plate -Transport dimensions: 3060/500/H930 mm -Weight: 89 kg

Condition: used, Forklift bucket, hydraulic forklift bucket, light material bucket, tipping bucket, container tipping device, forklift tines, forklift forks, fork tines -Forklift tines: 2 pieces/1 pair -Length: 700mm -Cross section: 140 x 50 mm -Recording: 400 mm (see sketch in the photos) -Transport dimensions: 845/945/H140 mm Ceb Exnieic Hqde Rsgt -Weight: 186 kg

Condition: used, Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws, interchangeable jaws, wedge bar chucks, interchangeable jaws, power chucks -Manufacturer: Forkardt, clamping claw clamping jaws for manual and power chucks -Clamping claw: Type SKA 140-32 -Clamping jaws: Type KBN 12 -Dimensions: see photo -Total dimensions: 105/200/H80 mm -Total weight: 4.3 kg Cgsb Exstigw Tsni Rst

Condition: used, Bending tool, die, lower tool, die tool, hemming tool, press tool, forming tool, clamp pressing tool, upper tool Cgob Eohb Uhfoxni Rot -Die tool: Form tool / press tool 2-part -Pressure profile: Ø 70 x 140 mm, 15 mm overhang -Side part: unscrewable -Socket: Ø 40 mm -Dimensions: 250/70 / H298 mm -Weight: 21 kg

Condition: used, Gear motor, electric motor -Speed: 140 rpm -Power: 0.37kw -Construction: B3 angle -Diameter hollow shaft: Ø 24 mm -Protection class: -Number: 1x gear motor available -Dimensions: 360/160/H235 mm -Weight: 12kg Cgsb Exnjcwl A Noi Rst

Year of construction: 1985, Condition: used, centrifugal fan, dust extraction fan, fan, suction, dust blower Cgsb Eecii N Sexni Ret -Motor power: 0.4 kW -Speed: 1276 rpm -Total pressure: 260 Pa -Volume flow: 3200 m³/h -Inlet connection: Ø 400 mm -Connection output: 360/470 mm -Dimensions: 1130/560/H780 mm -Weight: 106 kg

Condition: used, V-belt pulley, pulley with taper bushing, taper tensioning bushing, taperlock tensioning bushing Cgob Exniom T Aifo Ret -V-belt pulley: pulley with 5 grooves, type SPA 140-5 -V-belt width: 13 mm -Receptacle: Ø42 x 45 mm taper clamping bushing 2517 (can be changed) -Dimension: Ø146 x 80 mm -Weight: 4.9kg

Condition: used, pivot bearings -Inside diameter: 140 mm -Outer diameter: 230 mm -Brite outer ring: 80 mm -Width innering: 130 mm -Lubricating groove -Weight: 18 kg Cgob Exnob A H N Tji Ret -Number: several available

Condition: used, Machine vise, sturdy vise, drill vise -Jaw width: 220 mm -Clamping depth: max. 140 mm Cgsbeb A Nryo Exni Rot -Weight: 60 kg

Condition: used, Gear motor, electric motor, three-phase motor -Manufacturer Motor Bonfiglioli Type: 56BN/4 Csb Eockd E Nexni Regt -Manufacturer gearbox Bonfiglioli type: -Power: 0.12kw -Construction: B5 angle -Number: 1x available -Weight: 5kg

Condition: used, Butterfly valve, flap valve, ball valve, butterfly valve, shut-off valve, gate valve, pneumatic energy saving gate valve -Manufacturer: Schuko, pneumatic gate valve type 140 -Diameter: 140 mm -Valve drive: 220 V, convertible to 24 V -Nominal pressure: max. 6 bar -Number: 3x gate valve available -Price per piece -Dimensions: 520/260/H160 mm -Weight: 4,4 kg/pc. Cgjb Exjmydmmsni Ret

Condition: used, Flange connection, V-flange, pipe coupling, welding reduction, reduction, clapper base, pipe bend, welding bend, pipe angle -Pipe elbow: welding elbow 90° 63 pieces -Type: Ø 140 mm x 4.0 mm 49 pieces. -Type: Ø 139.7 mm x 4.0 mm 14 pieces. -Material: P235 GHTC1, see photo parts list -Price/tax: complete -Stock: other sizes/types also available, please inquire -Transport dimensions: 1200/800/H760 mm -Weight: 256 kg Cgob Eoq N E Rujxni Rst

Condition: used, Wall jib crane, indoor jib crane, indoor crane, workplace crane, wall mount, helmet rail mount, wall mount for swivel arm Cgob Exnsizk R Esi Ret -Wall mount: for wall jib crane boom helmet rails or similar -Total height: 900mm -Dimensions: see photos -Transport dimensions: 900/200/140 mm -Weight: 17 kg

Condition: used, V-belt pulley, pulley with taper bushing, taper tensioning bushing, taperlock tensioning bushing Cjb Exom T Aibjni Rjgt -V-belt pulley: pulley with 5 grooves, type SPA 140-5 -V-belt width: 13 mm -Receptacle: Ø42 x 45 mm for taper clamping bushing 2517 (can be changed) -Dimension: Ø146 x 80 mm -Weight: 3.7kg

Year of construction: 2000, Condition: used, fuel type: electric, Tiller head, pedestrian stacker, pedestrian pallet truck, tiller, steering, electric hand pallet truck -Manufacturer: Jungheinrich, drawbar complete with drive from pedestrian stacker type EJE-KmS 16G-24-140-56 -Drive motor: 24 VDC / 1.5 kW Cob Eoi Dbzkjxni Rogt -Individual components: see photos -Number: 1x drawbar available -Delivery/Price: per piece -Dimensions: 1585/510/H265 mm -Weight: 82 kg/pc.

Condition: used, Starter Bosch -Manufacturer: Bosch starter type -Voltage: 12V -Teeth: 9 -Magnetic coil: Type -Total dimensions: 290/190/H115 mm -Weight: 11 kg Cgob Exnieliugbe Rjt

Condition: used, Chip motor for wedge bar chucks, three-jaw chucks, three-jaw lathe chucks, power chucks, hydraulic chucks, power chucks hydraulic motor electric clamps -Berg: clamping technology chip motor type FSP 140 U -Shaft: M22 x 1.5 Csbsd S Hqde Exni Regt -Dimensions: Ø 140/490 mm -Weight: 24.5 kg

Condition: used, Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Piston rod: Ø 32 mm Cgjb Exnisft Ah He Rot -Stroke: 140 mm -Total length retracted: 460 mm -Admission: hole Ø 23 mm -Dimensions: 460/60/H135 mm -Weight: 8.5 kg