Used Rotair Mdvs 230 P10 for sale (9,154)

Condition: new, overall weight: 750 kg, empty load weight: 140 kg, maximum load weight: 610 kg, operation weight: 750 kg, axle configuration: 1 axle, loading space length: 2,304 mm, loading space width: 1,256 mm, loading space height: 1,100 mm, Car trailer UNITRAILER Garden Trailer 230 KIPP [with support wheel, blue high tarpaulin and high bows] Transport trailer UNITRAILER Garden Trailer 230 KIPP is the latest product from UNITRAILER. It is currently our largest car trailer with a maximum permissible weight of up to 750 kg. The trailer has a folding tailgate, which enables loading and unloading in just a few minutes. By using a tiltable drawbar, it can be placed vertically on the rear wall. We will take care of all the formalities associated with the purchase for you. The trailer will be delivered to the address you specify within 5 working days together with the registration documents. Once you have received the trailer, you only need to register and insure it to be able to use it in full. If you decide to buy our new car trailer, you will receive a 2-year warranty so that you can use it without worrying about damage. Each product is sent with a user manual and a warranty booklet. All important documents will be sent to you together with the purchased Garden Trailer 230 KIPP. Furthermore, you always have the option of purchasing additional equipment in the form of a jockey wheel or anti-theft device or additional drop sides. If you have any questions or problems when using the trailer, you can contact our advisors at any time. They will be happy to provide you with all the information you need and explain everything to you. Cobet Iv Dlsu Tb Hnogt Our car trailer can also be used thanks to its tiltable drawbar. This makes it much easier to load and unload goods that you would normally have to lift or put down. This solution is also most often found in much more expensive trailers, which significantly affects the better feeling of using them. Another advantage of this solution is the ability to hold the trailer vertically with the drawbar folded in and resting on the rear dropside. So you don't have to worry about the trailer taking up a lot of space in the garage or not fitting because of the protruding drawbar. You can even put it on the front of the building or anywhere!

Condition: excellent (used), Year of construction: 2020, operating hours: 40 h, Functionality: fully functional, For sale Trotec Speedy 400 laser plotter 60 W Ceramicore Iradion ceramic CO2 laser source Year of manufacture 12.2020 delivery and start-up 01.2021 The plotter, like new, has about 30-40 hours of work. Used occasionally for processing, cutting samples. The set includes two anti-reflective aluminum work tables and the second one made of plastic. Additionally, the set includes an optional JC Vision camera for head positioning. Cgsbu Tb Hsvx Ht Aonot The Trotec Atmos Duo Plus 230 exhaust is sold together with the plotter, also in like-new condition.

Year of construction: 2023, operating hours: 1 h, Condition: as good as new (ex-display), The CD50 series of our high pressure machines covers a pressure from 230 to 2000 bar and a volume flow from 7 to 74 l/min. The pump is driven by a 4-cylinder water-cooled Toyota diesel engine. The fully enclosed frame is made of hot-dip galvanized steel to ensure long life and corrosion resistance. The frame is primed and then painted. The machine only requires a footprint of 1550 x 920 mm. There are 4 rubber feet mounted under the frame. The machine is also equipped with forklift pockets and lifting eyes at all four corners. For protection and storage of, for example, high-pressure hoses, a galvanized roof plate is provided. Similar but no Dynajet, Falch, Hammelmann, Kamat, Kärcher, Oertzen, Uraca, Woma, etc. Available models: ----- Model Pressure Flow rate CD50-230 230 bar 74 Lpm CD50-400 400 bar 40 Lpm CD50-500 500 bar 33 Lpm CD50-700 700 bar 25 Lpm CD50-1000 1000 bar 20 Lpm CD50-1250 1250 bar 15 Lpm CD50-1380 1380 bar 13 Lpm CD50-2000 2000 bar 10 Lpm Cgebushgbf Eo Tb Hnot General Specifications: ----- Max. Pump speed: 1160 rpm Drive engine: Toyota Diesel 4 cyl. Water cooled Power of drive motor: 37.3 kW Drive engine speed: 1800 rpm Tank capacity: 90 L Max. Fuel consumption: 10.0 L/h Loudness (7m): 80 dBa Dimensions and weight: 1550mm x 920mm x 1250 mm (725 kg). Standard accessories included.

Condition: new, Year of construction: 2025, laser power: 3,000 W, total length: 12,900 mm, total height: 2,650 mm, total width: 2,370 mm, workpiece weight (max.): 300 kg, overall weight: 5,750 kg, pipe diameter: 230 mm, Bodor T-series - The solution for your pipe and profile processing The Bodor T-series sets new standards in pipe and profile processing. Thanks to innovative laser technology, it offers the highest precision, efficiency and flexibility for industrial applications. Your advantages at a glance - Precise and fast processing: Equipped with a high-performance laser, the T-series ensures exact cuts, even with complex geometries. - Automated processes: Thanks to modern clamping devices and automatic centering, the processing process is accelerated and simplified. - Flexibility: Suitable for a wide range of pipe and profile types, including round, square and rectangular pipes as well as special profiles. - Robust design: The machine structure is designed for durability and stability, even under demanding production conditions. - Intuitive operation: With the Bodor cloud and a user-friendly interface, you always retain full control over your production. Technical highlights of the Bodor T series - Laser type: fiber laser Cjbu Tb Hjvrw T Tonsgt - Pipe diameter: 8-230mm for the T2 and 25x356mm for the T3 - Max. pipe length: Up to 6500 mm (optionally up to 9200mm) - Power: 3 or 6 kW The Bodor T series is the ideal choice for companies that place the highest demands on the quality and efficiency of their production. With this machine, you can optimize your processes and increase your competitiveness sustainably. Contact us! As a trading partner of the Bodor T series in North Rhine-Westphalia, we are happy to advise you individually. We not only offer you the right machine, but also comprehensive service and support.

Condition: used, mileage: 255,100 km, power: 88 kW (119.65 HP), fuel type: diesel, gearing type: mechanical, overall weight: 2,300 kg, maximum load weight: 820 kg, first registration: 12/2016, loading space length: 2,100 mm, emission class: euro6, color: white, number of seats: 3, Year of construction: 2016, DEK:[9056279] - Used Van: Ford Connect Van L2 long wheelbase, Trend. - Year: 2016, Engine: 1.5 TDCi 120cv Euro 6, Km: 255,100. - 3-seater van, long wheelbase. 2,100 mm cargo compartment, with opening bulkhead and folding passenger seat for long loads. Marine plywood cargo floor covering and No. 2 cargo compartment safety locks. - Trend trim, equipped with: Climate control, Radio-Bluetooth with USB, Rear parking sensors, Fog lights, On-board computer, Central locking, Double keys, Spare wheel, Driver airbag, ABS, ESP, TCS. - Bodywork with dent on rear right and left wheel arch and some scratches, Interior intact, Mechanics in working order. - To report: Clutch completely worn, to be replaced! _____ CARLO MAURI S.r.l. - Lurago d'Erba - Via Vallassina 6 - Tel. 031.699.049 - Sellers: Emanuele, Luca, Giuseppe, Davide. - Lurago d'Erba (Como Province) Lombardy opening hours: Monday to Friday: 8.30 / 12.15 - 14.00 / 19.00 Saturday: 8.30 / 12.00 - 14.00 / 17.30 - Certified mileage. - Possibility of personalized financing. Carlo Mauri Srl declines all responsibility for any involuntary inconsistencies present in the advertisement which does not represent any contractual commitment, the prices shown are exclusive of VAT and transfer of ownership. Cebu Tbevv Eiqo Hnjgt

Condition: new, Band saw machine Make: METALLKRAFT Model: BMBS 230 x 280 H-DG Art.no.: 3680013 Condition: New machine Cutting range (round): 230 mm cutting speed: 35/70 m/min standard equipped with: Cobu Tscuntzsb Hnogt - horizontal vice - length stop (600 mm) - Monitoring of saw band tension, electromechanical - chip clearing brush - coolant device - operating instructions

Condition: new, Parallel lathe with display Fervi T075/400V3A. Monoblock cast iron base. Height of Centers 230 mm Max. diameter on Bench 460 mm Max. diameter on Carriage 270 mm Max. diameter on Slot 690 mm Tool Height 25 mm Distance between Centers 1500 mm Distance between Guides 300 mm Bar Taper CM MT7 Bar Passage 80 mm Spindle Attachment Camlock D1-8 Spindle Speed (12)25-1700 rpm Longitudinal Feeds (42) 0.031 - 1.7 mm/rev Cross Feeds (42) 0.014 - 0.784 mm/rev Metric Threads (41) 0.1 - 14 mm Inch Threads (60) 2 - 112 TPI Tailstock Spindle Stroke 130 mm Taper CM MT4 Motor 400 V 50 Hz 5.5 kW Coolant Pump 400 V 50 Hz 90W Machine Dimensions 2750 x 1080 x 1370 mm Net Weight 2020 kg Total Dimensions 2870 x 1180 x 1570 mm Gross Weight 2200 kg Accessories Included: 3-jaw self-centering chuck Ø250 mm / D1-8 4-jaw self-centering chuck Ø300 mm / D1-8 Drive flange Ø350 mm Cebu Tb Hevbqv Honegt Fixed steady rest Moving steady rest Reduction bushing CM 7 / 4 Fixed tailstock CM 4 Rotary tailstock CM 4 Thread comparator Turret guard Spindle guard Rear splash guard Quick change turret type B LED lamp Cooling system Electromechanical foot brake Bathed carriage gears oil Quick-lock tailstock carriage

Year of construction: 2003, Condition: excellent (used), Quick relief for broken tools The eromobil® metal eroder removes broken taps, twist drills and more in minutes without damaging the workpiece. A professional solution to minimize production disruption and avoid rejects. Easy to use The hollow copper electrode is clamped in the oscillating head. It has a smaller diameter than the broken tool. During eroding, the core of the broken tool is destroyed. The cutting edges loosen and can be easily removed. The electrode is not in contact with the workpiece, so the thread remains undamaged. Ordinary drilling emulsion is used as a coolant. Wide range of possible applications eromobil® is an erosion device for fast and effective use in column and radial drilling machines, milling machines, boring machines, magnetic drilling machines and special machines. Tool breakage is a problem in many industries - eromobil® is the solution. Whether it's in the production of parts in mechanical engineering, apparatus and plant construction, or in the automotive industry, tool breakage and getting stuck in expensive items happens in almost every company and business. Cobu Tb Hsulculonjgt Technical specifications Choose from two available variants of the eromobile - depending on the power you need or the size of the threads you want to zero.

Year of construction: 2021, operating hours: 1 h, Condition: as good as new (ex-display), The HDT50 in the hot water trailer version covers a pressure of 230 to 500 bar at a flow rate of 33 to 80 l/min. The pump is driven by a water-cooled 4-cylinder Toyota diesel engine. Durability and corrosion resistance are ensured, among other things, by the frame inside the trailer, which is made of hot-dip galvanized steel. In addition, the frame is primed and then painted, which creates a very attractive appearance. The frame can be pulled out very easily for maintenance. The CD50 in the trailer version can be configured with numerous options, such as a hot water boiler, electrically operated hose reel, remote control, etc.. Similar but no Dynajet, Falch, Hammelmann, Kamat, Kärcher, Oertzen, Uraca, Woma, etc. Models available: ----- Model Pressure Flow rate HDT50-230 230 bar 80 Lpm HDT50-400 400 bar 40 Lpm HDT50-500 500 bar 33 Lpm General Specifications: ----- Max. Pump speed: 1160 rpm Drive engine: Toyota Diesel 4 Cyl. water cooled Drive motor power: 37.3 kW Drive motor speed: 1900 rpm Csbuehgbkus Tb Hnsgt Tank capacity: 90 L Max. Fuel consumption: 11.0 L/h Loudness (1m): 89 dBa Dimensions and weight: 3050mm x 1700mm x 1900 mm (2000 kg)

Condition: used, axle configuration: 2 axles, first registration: 03/2007, color: other, Year of construction: 2007, Empty weight: 7.100 kg Axle 1: left 7 mm right 14mm Axle 2: left12 mm right 6 mm Axle 3: left mm right mm Cebueru A Dmj Tb Hnsgt

Condition: new, bending length: 3100sheet thickness: 8upper roll diameter: 230 Technical specifications: - Hardened and polished rolls - Conic bending device - Digital readout for side rolls - Complete body made of ST-52 Steel - Portable control panel separated form machine - Rolls are mounted with bearings - Top roll cover, openable and closeable by hydraulic, controlled from control panel. - All rolls are driven by hydraulic motor and planetary gearbox - Side rolls upwards downwards movements are hydraulic powered Options: variable rotation speed EURO 4.682.00 Material feed table on request Oil cooler EURO 1,040.00 Center support EURO 8.250.00 Side supports EURO 7.070.00 Cgsbjd Ab Tgju Tb Hnot We have many references!

Condition: new, Year of construction: 2025, Edge Sander Description: Sanding of curved materials using a side table. Oscillation allowing optimal use of the entire surface of the belt. Simple and quick sanding belt replacement using a lever. Movable aggregate ensures both horizontal and vertical operation. Additional table with adjustable height included as standard. Tensioning device ensures even sanding belt tension. Compact size of the device with a wide range of applications. Technical Data: Belt size [mm]: 2515 x 152 Worktable size [mm]: 840 x 300 Edge and face sanding at an angle [°]: 0 - 45 Additional table size [mm]: 300 x 250 Table height adjustment [mm]: 80 Side bumper size [mm]: 700 x 60 Maximum sanding length [mm]: 790 Cebu Tbovugq Hs Hnjgt Dust extraction port diameter [mm]: 100 Belt speed [m/min]: 980 Motor power [kW]: 2.2 Power supply [V]: 230 Weight [kg]: 138 Note: The price quoted is the net price. It does not include transportation costs.

Condition: used, Year of construction: 2008, Functionality: fully functional, machine/vehicle number: 2300.12.003/1.0, total width: 130 mm, total length: 320 mm, total height: 200 mm, cutting width (max.): 2,300 mm, overall weight: 800 kg, Equipment: documentation/manual, Precision cutting system for textile applications The ColorEdge 230 from Hollanders is a professional cutting system that was specially developed for the precise cutting of textile materials. With a working width of 230 cm, this machine is ideal for roll-to-roll applications and ensures clean, precise cuts that meet the highest demands. Technical highlights: • Working width: Up to 230 cm. • Cutting technology: High-precision roll-to-roll cutting for consistent and accurate results. • Material compatibility: Suitable for a wide range of textiles (e.g. polyester). Cgobu Tsvnma Usb Hnst • Operation: simple and efficient processing for maximum productivity. • Construction: Robust, durable design for continuous professional use. • Dimensions & weight approx. 320 x 200 x 130 cm (WxHxD), approx. 800-850 kg Spare parts replaced • PVC transport rollers (11/2023) • Joystick control (03/2023) NOTE: the matching printing machine and car wash from Hollanders are also available from us

Condition: new, Extraction capacity of filter unit at spigot*: 600/720* m³/h Total power consumption*: 0.42 kW Operating voltage: 230 V, 50/60 Hz,1Ph+N+PE Noise level*: 67 db(A) Dimensions L/W/H in mm: approx. L 800 / W 493 / H 415 Colour: RAL 7035 Weight: 53 kg Manufacturer: ISI Industrieprodukte GmbH * Depending on the filter equipment Special voltage or special colour on request Application: Separation of emulsion mist, for small to medium-sized machine workrooms. Your advantages: - Compact dimensions - High-efficiency EC fan as standard - Adjustable speed and air output (optional) Cgobujh Rynqs Tb Hnot - Washable pre-filter - H13 particulate air filter separation rates of up to up to 99.95%. - Large range of mounting and connection accessories - Flexibly adaptable to the application - Optimum service life - Quality Made in Germany With our TEBARON, we offer a compact air filtration unit which meets today's diverse possibilities of processing and the possibilities of machining and the resulting pollutant profiles. The TEBARON is a compact air filtration unit for small to medium to medium-sized machine workrooms for the separation of emulsion mist. Our main development goals were compact dimensions with maximum energy efficiency economical operation due to low follow-up costs and maximum sustainability. To achieve these goals, we use highly efficient, controllable EC fans in the TEBARON-series we use highly efficient, controllable EC fans. The standard, integrated pre-filter package consists of three parts and is completely washable! It is highly effective against liquids and large to medium particles to protect the main filter and maximise its and maximise its service life. The main filter can be individually adapted to the adapted to the application application. In the standard version, we use an H13 HEPA filter to achieve a filtration efficiency of 99.95% against particles of of 0.3 μ.

Condition: used, Year of construction: 2012, Functionality: fully functional, power: 3.2 kW (4.35 HP), nominal current: 8 A, input voltage: 400 V, type of input current: three-phase, HSM hard drive shredder type Powerline HDS 230. Good condition. Only used a little. Cutting unit still fully operational. Cobu Tjvn Au Ujb Hnegt

Condition: good (used), Year of construction: 2008, Hüller Hille NBH 230 horizontal machining center, Year of construction 2008, Siemens 840 D control system, Travel X/Y/Z 1,200/1,000/1,000 mm, tool changer 320 times, SK 50 holder, spindle speed up to 6,500 rpm, drive power 37 KW, Pallet magazine Kirchgassner, Cjbu Tbjuxcdns Hnsgt 32 places machine pallets 800 x 600 mm / fixtures, 32 places Euro pallet workpieces,

Condition: new, sheet thickness: 8bending length: 3100upper roll diameter: 230 Technical specifications: - Hardened and polished rolls - Complete body made of ST-52 Steel - Machine have 4 rolls and designed for symmetrical working principle - Hydraulic powered cover for easy material extracting - Digital readout for side rolls (2 digital readout) - Side rolls are free for rotation and upwards downwards movements are hydraulic powered - Top and bottom rolls are driven by hydraulic and gearbox. Bottom roll’s vertical movements are hydraulic powered - Separate control panel form machine Cobu Tbsd Ab Sas Hnjgt - Conic bending device - In accordance for CE norms Options: - variable speed of rotation EURO 4.681,-- - metarial feeding table EURO 3.400,-- - oil coiler EURO 1.040,-- - center support EURO 8.250,-- - side supports EURO 7.070,-- - Automatic material extractor - PLC control - CNC control - Automatic material loading system - Changeable top roll - Adjustable bottom roll support system (for customer’s special requests) We have many references!

Condition: new, 230 mm 230 x 230 mm saw band length 2950 x 27 x 0,9 mm table height mm band speed 15 - 100 m/min total power requirement 2,2 kW weight of the machine ca. 1,2 t dimensions m SHARK 230-1 NC HS 5.0, electro-hydraulic two-column fully automatic band saw with Cobuofg E Hye Tb Hnegt semi-automatic function for 0° cuts of mild steel, stainless steel, Steel alloys, solid and profile material, with a maximum remaining piece length of 60 mm. - The cross section is max. 230x230 mm. - Numerically controlled band saw machines with the new, specially designed by MEP developed for Automatic Windows “CE” based E FEATURES: - User interface with 7” touch screen display and mechanical buttons for the operating functions of the sawing machine, guaranteed reliable Operation, simple and intuitive, and real-time control of all Cutting parameters. - Safety enclosure in accordance with the latest safety regulations Machinery Directive EN 13898/2007. - New fieldbus communication system with double microprocessor Serial connection. - Robust cast iron structure (G25) to compensate for vibrations Improve machine stability and protect the saw band

Condition: used, Functionality: fully functional, Year of construction: 2024, load capacity: 2,300 kg, lifting height: 200 mm, mast type: standard, fork length: 1,150 mm, drive type: Keine, Hand pallet truck Mast type: none Condition: New Technical condition: New Front tires type: Polyurethane Front tires Condition: New Rear tires Type: Solid rubber Cobu Tbjuwf Srs Hnjgt Rear tires Condition: New Description: NEW Model BT LHM230 Underride height 85 mm Rated capacity 2300 kg Hydraulic overload Forks 1150 mm Dimension over the forks 520 mm Steering wheels/fork rollers Tandem - rubber / polyurethane Warranty 99 year warranty on the fork frame 5 year warranty on pump unit and drawbar, 3 year warranty on seals and 1 year warranty on wheels and castors. Standard equipment Our LHM230 - The universal one - Maximum load capacity of 2,300 kg - Sensitive lowering possible - Experience for over 60 years. Made in Sweden - Manufactured in our Swedish production center. - High quality for reliable use. - Very low life cycle costs thanks to long service life. - Innovative design for easy operation. - Overload valve included.

Condition: new, Extraction capacity of filter unit at spigot*: 600/720* m³/h Total power consumption*: 0.42 kW Operating voltage: 230 V, 50/60 Hz,1Ph+N+PE Noise level*: 67 db(A) Dimensions L/W/H in mm: approx. L 800 / W 493 /H 415 Colour: RAL 7035 Weight: 53 kg Manufacturer: ISI Industrieprodukte GmbH, Germany * Depending on the filter equipment Special voltage or special colour on request Your advantages: - Compact dimensions - ISI-TRONIC as standard - Electronically controlled EC fan as standard - Adjustable speed and air flow - Washable pre-filter Cebueh Rynuo Tb Hnegt - H13 particulate air filter provides separation rates of up to up to 99.95%. - Large range of mounting and connection accessories - Flexibly adaptable to the application - Optimum service life - Quality Made in Germany With our TEBARON, we offer a compact air filtration unit which meets today's diverse possibilities of processing and the possibilities of machining and the resulting pollutant profiles. pollutant profiles. The TEBARON is a compact air filtration unit for small to medium to medium-sized machine workrooms for the separation of emulsion mist. Our main development goals were compact dimensions with maximum energy efficiency economical operation due to low follow-up costs and maximum sustainability. To achieve these goals, we use highly efficient, controllable EC fans in the TEBARON- -series we use highly efficient, controllable EC fans. The standard, integrated pre-filter package consists of three parts and is completely washable! It is highly effective against liquids and large to medium particles to protect the main filter and maximise its and maximise its service life. The main filter can be individually adapted to the adapted to the application application. In the standard version, we use an H13 HEPA filter to achieve filter to achieve a filtration efficiency of 99.95% against particles of of 0.3 μ.

Year of construction: 2018, Condition: new, 1,5 Kw - 230 Vac - Tipo S1 -100 % IP 55 Tipo MY 90S-2. New Power electric - original Package. Stock avalaible 50 qt. Cgjbu Tb Hsh S Nv Renjt

Condition: good (used), Year of construction: 2013, Functionality: fully functional, Print speed - up to 200m²/h Print mode - 10 pictoliter Resolution - up to 1000 dpi Csbu Tbottvwre Hnjgt Color - Cyan, Magenta, Yellow, Black, light Magenta, light Cyan Max. print width - 2500 mm Current printed meter - 208090 m²

Condition: new, bending length: 2600sheet thickness: 10upper roll diameter: 230 Technical specifications: - Hardened and polished rolls - Conic bending device - Digital readout for side rolls - Complete body made of ST-52 Steel - Portable control panel separated form machine - Rolls are mounted with bearings - Top roll cover, openable and closeable by hydraulic, controlled from control panel. Cgsbu Tb Hod Ab Thenst - All rolls are driven by hydraulic motor and planetary gearbox - Side rolls upwards downwards movements are hydraulic powered Options: - variable speed of rotation EURO 4.682,-- - metarial feeding table on request - oil coiler EURO 1.040,-- - center support EURO 8.250,-- - side supports EURO 6.600,-- We have many references!

Condition: new, sheet thickness: 13bending length: 2100upper roll diameter: 230 Technical specifications: - Hardened and polished rolls - Complete body made of ST-52 Steel - Machine have 4 rolls and designed for symmetrical working principle - Hydraulic powered cover for easy material extracting - Digital readout for side rolls (2 digital readout) - Side rolls are free for rotation and upwards downwards movements are hydraulic powered - Top and bottom rolls are driven by hydraulic and gearbox. Bottom roll’s vertical movements are hydraulic powered Cebod Ab Sceu Tb Hnogt - Separate control panel form machine - Conic bending device - In accordance for CE norms Options: - variable speed of rotation EURO 4.681,-- - metarial feeding table EURO 3.400,-- - oil coiler EURO 1.040,-- - center support EURO 8.250,-- - side supports EURO 5.560,-- - Automatic material extractor - PLC control - CNC control - Automatic material loading system - Changeable top roll - Adjustable bottom roll support system (for customer’s special requests) We have many references!

Condition: new, bending length: 2100sheet thickness: 13upper roll diameter: 230 Cgsbu Tjd Ab Tisb Hnet Technical specifications: - Hardened and polished rolls - Conic bending device - Digital readout for side rolls - Complete body made of ST-52 Steel - Portable control panel separated form machine - Rolls are mounted with bearings - Top roll cover, openable and closeable by hydraulic, controlled from control panel. - All rolls are driven by hydraulic motor and planetary gearbox - Side rolls upwards downwards movements are hydraulic powered Options: - variable speed of rotation EURO 4.682,-- - metarial feeding table on request - oil coiler EURO 1.040,-- - center support EURO 8.250,-- - side supports EURO 5.560,-- We have many references!