Used Rotair Mdvs 150 P12 for sale (19,865)

Condition: new, Year of construction: 2022, Bandwidth: 150mm Belt length: 3000mm Table size: 960mm x 352mm Febvdt Tegtdpuofjgb Additional table: 330mm x 330mm grinding roll diameter: 60mm / 100mm / 120mm veneer sanding device: yes Oscillation: yes sanding unit swivels: yes suction connection: 120mm Motor power: 3 kW Machine length: 1900mm Machine width: 900mm Weight: 310kg

Condition: new, Year of construction: 2023, machine/vehicle number: 3487, Holzkraft edge sanding machine KSO 150 F Work table 960 x 350 mm, Table height adjustment 230 mm, Sanding surface 1,050 x 150 mm, Belt speed 20 m/sec., Oscillation stroke 20 mm, Motor 3 kW (4 HP), Fsbovpq Raevdt Tfjgb Motor oscillation 0.25 kW (0.34 HP), Sanding belt dimensions 3,000 x 150 mm, Console for feed device, Veneer edge sanding device with contact shoe with fine adjustment and stop rulers, with grooved infeed ruler for veneer overhangs, Height-adjustable additional table with suction for sanding radii, Sanding unit can be swiveled up to 45° using a lever, Suction nozzle D = 140 mm, Weight approx. 295 kg from the Seevetal location as inspected, without transport, subject to prior sale

Condition: new, Terumo Teruflex Transfer Bag 150 ml BB*T015CM 25 pcs/box exp. 2025.07.31 - 1 box exp. 2025.09.30 - 1 box Price is for one box only. Fobvdjvxvhpst Tfsgb

Condition: excellent (used), I sell Esab LTG150 welding machine in very good condition. Fsbvju Sun Eedt Tfsgb

Condition: new, Functionality: fully functional, mileage: 750 km, power: 206 kW (280.08 HP), overall weight: 15,000 kg, fuel type: diesel, color: beige, axle configuration: 4x4, tire size: 14.00 R 20, fuel: diesel, wheelbase: 4,150 mm, brakes: engine braking, driver cabin: sleeper cab, gearing type: mechanical, emission class: euro6, suspension: parabolic leaf (spring), Year of construction: 2023, Equipment: ABS, air conditioning, all wheel drive, compressor, cruise control, differential lock, low noise, onboard computer, parking heater, sleeping cabin, soot filter, NEW VEHICLE CHASSIS without first registration! Special approval for registration available! *WARRANTY EXTENSION to 5 years from first registration optionally possible! In addition to the standard equipment, the following factory options are installed. Differential lock on the driven front axle Rear axle ratio i = 5.72 Spare wheel, dimension corresponds to chassis tires Batteries 170 Ah for Eurocargo Battery disconnect switch mechanically on the chassis, mounted on the battery box Generator 2880 watts (24 volts x 120 amps) Voltage converter 24/12 volts (10.5 amps) Preparation for toll system (OBU), includes third DIN compartment, antenna and wiring on the dashboard, without receiver Front & ramp mirrors are manually adjustable but heated Luxury passenger seat, 4-way adjustable, air-suspended, integrated headrest and seat belt, heated, lumbar support Compressed air connection in engine tunnel console Electronic immobilizer and 3rd vehicle key Luxury driver's seat, air-suspended, heated, multi-adjustable, lumbar and headrest, with integrated 3-point safety belt Iveco radio DAB+, Bluetooth, integrated microphone, mini USB / AUX-in connection, LCD display Air conditioning with manual control Multifunction steering wheel with steering wheel control Pollen filter for driver's cab Rear view mirror for body width 2500 mm Windshield and side windows tinted Protective grille for headlights Sun blinds for side windows, driver and passenger side Sun protection filter integrated in windshield Diesel/air auxiliary heating with timer (Eberspächer, AirTronic D2) heat flow 2.2kW Preparation for rotating beacons Trailer socket for 12 volt operation, 13-pin Trailer socket for 24 volt operation, 15-pin Adaptation of exhaust tailpipe for fords Fuel tank in plastic design, with 200 liter capacity, lockable Fsbovtwyvjvdt Tfsgb Fuel pre-filter type Racor with separator, heatable Air tank in aluminum design, number depending on suspension version and trailer version Parabolic spring on the front axle Parabolic suspension on the rear axle End cross member for central axle trailer, D = 190 kN Exhaust tailpipe on the left side CAN bus interface "CAN-OPEN" for body control Air compressor 360 cc, recommended for trailer operation with continuous braking system MICHELIN XZL+ 14.00 R 20 off-road Color: light ivory, IC 074, similar to RAL 1015 Purchase / financing / hire purchase / leasing / rental possible. Errors and prior sale reserved! Pictures may contain optional extras at an additional cost! Delivery date by arrangement! Viewing by appointment only! Address only office address, not vehicle location! Our general terms and conditions apply!

Condition: good (used), Sumbel Enano 150 gluing machine The machine is fully operational ready for production. Like a new one. It is the most valued brand among small gluing machines. An ideal solution for the production of covers, decorative packaging, etc. Production Germany. Febvdou Umapot Tfjgb The machine works on cold glue Copper cylinders. Smooth adjustment: glue thickness, gap thickness. A set of separators, Simple cleaning without the need for tools. Working width 150mm 230V power supply Weight 30kg

Condition: new, Year of construction: 2022, Bandwidth: 150mm Belt length: 3000mm Table size: 960mm x 352mm Fgjbvdtjgr Ufhs Tfeb Additional table: 330mm x 330mm veneer sanding device: yes Oscillation: yes sanding unit swivels: yes suction connection: 120mm Motor power: 3 kW Machine length: 1900mm Machine width: 810mm Weight: 290kg

Condition: reconditioned (used), Year of construction: 2010, Functionality: fully functional, warranty duration: 12 months, All of our advertised machines and spare parts are supplied after a complete overhaul, only the skeleton remains, we replace all sliding, rolling, sealing and locking components in gears, bearings, thermistors and brakes in drives, we fit new HDDs in a clean installation. Everything is debugged and carefully tested. Robot arm (axis 4,5,6) after complete overhaul in 2023, debugged, tested, fully functional, with follow-up maintenance. Price is without applicable VAT. For sale 2 pieces. Fgobvdoq Tt Ttot Tfsb

Condition: used, Year of construction: 2017, Field of application: Construction Make of engine: Cummins 6BT 5.9 1130 Capacity: 10,6 m³/m Compressor type: Screw compressors Working pressure: 10 bar Please contact Sales Department for more information Fsbvdteq Eaptj Tfjgb

Condition: good (used), Double riveting machine 105 -06 For riveting mechanisms onto ring binders and lever arch filing systems With braking motor drive Rivet feeders are designed for a rivet shaft diameter (with variable rivet shaft length and riveting head diameter tolerance of 2 mm) Standard configuration for working with hollow rivets with a 4 mm shaft diameter, length up to 19 mm, head diameter 6 - 8 mm or 8 - 10 mm Single riveting possible by shutting down the left (and middle) riveting head Febvdtsuitcte Tfegb Adjustment of the rivet pitch via handwheel Fast and precise set-up thanks to integrated scales in the support table and easily adjustable stops Release via electric foot switch or via three microswitches in the rear and side stop, which enable fast and precise application With electric part counter

Condition: excellent (used), Volpato LBK 150 edge grinder Fgsbvdtjvdpyve Tfeb Grinding belt height 150mm Length of the grinding belt 2650mmm Oscillation of the grinding belt mechanical Raising/lowering the unit from the control panel Main motor 3kw Oscillation motor 0.37kw CE certificate Extraction nozzle 110mm

Condition: excellent (used), Year of construction: 2011, Functionality: fully functional, total height: 2,450 mm, total width: 1,000 mm, total length: 2,630 mm, pressing force: 150 t, table width: 600 mm, table length: 1,520 mm, reverse speed: 10 mm/s, ram stroke: 300 mm, distance between stands: 610 mm, clearance between the columns: 1,520 mm, pressing speed: 5 mm/s, Sahinler plate bending machine in very nice condition capacity 150T with peddestal 2-hand control Fgjbvdt Tovcpl Aefeb

Condition: used, Year of construction: 2023, operating hours: 50 h, axle configuration: 4x4, fuel type: electric, Equipment: all wheel drive, Field of application: Construction Drive: Wheel Fobvdou Rlmvjt Tfegb Mast: articulated arm Rental currency: EUR Please contact Jan De Lepeleer for more information

Year of construction: 2012, Condition: like new (used), Functionality: fully functional, Special opportunity! From stocks in the state of Rhineland-Palatinate, we can offer you these well-maintained CO2 incubators from the global brand "Heraeus" or "Thermo Electron" type HERAcell 150 in copper design. The HERAcell 150 is one of the most used and reliable devices in the sector, and is now an indispensable part of almost every laboratory worldwide. It has a completely copper interior with a water tank integrated directly into the work area, which makes working even easier, and three copper shelves. The devices were purchased by a biology institute at the university, but were hardly used, and mostly only switched on for testing purposes - all components including the shelves are in a technically and visually very well-maintained condition - see pictures. There is no damage or malfunctions, the devices can be put into operation immediately - however, for the sake of good order, we would like to point out that all regular tests in accordance with STK / MTK must be carried out again before commercial use! The greenish discoloration shown is due to the use of water in combination with copper during the functional tests and does not limit usability in any way. In addition to the device itself, three shelves, power cable and voltage converter from 120 to 230 volts are included, as the devices were originally ordered with a 120 volt power supply. The price is for one device with accessories as described. Technical data: Capacity (Anglo-American)5.3 cu. ft. Data Output RS232 Capacity (metric)150 L Chamber Material Copper CO2 Concentration Range0 to 20% CO2 Sensor TechnologyTC Sensor Lighting LED MaterialCopper O2 Concentration Range Optional 1 to 21% or 5 to 90% Oxygen Control Optional 1 to 21% or 5 to 90% Relative Humidity Fsbvjvph Ensdt Tfjgb

Condition: used, Year of construction: 2011, operating hours: 4,336 h, fuel type: diesel, motor manufacturer: Volvo Penta, Field of application: Construction Empty weight: 3.395 kg Generator capacity: 150 kVA Fgebvdtonp Ayfs Tfjb Please contact Sales Department for more information

Year of construction: 2018, Condition: excellent (used), Heraeus Kendro HeraCell 150 Co2 Incubator Technically and optically as good as new HeraCell 150 incubator HERAcell has instead of the instead of the usual water tray new type of water reservoir. This ensures high relative humidity (rH) and, above all and above all for short moisture recovery times. Febvdteiv S E Ue Tfjgb Compared to conventional CO2 incubators with water trough HERAcell achieves a moisture recovery time up to five times faster humidity recovery time. Consistent humidity Short humidity recovery times play an important role, especially when the the door of the incubator has to be opened frequently door must be opened frequently or volumes of media are processed. For devices with a water tray the air layer between the bottom and tray prolongs the moisture recovery time. The result is high evaporation rates in the cultures. HERAcell, on the other hand, ensures very short - up to five times times faster - thanks to superior thanks to superior technology: - Large water surface area (due to the use of the entire inner chamber floor) - Direct heat transfer from the heated floor into the humidifying water - Patented floor heating after after door opening and during O2 gassing Early water level alarm The water level is continuously monitored monitored, and an acoustic and and optical alarm signals signals in good time that water needs to be needs to be topped up. ContraCon - decontamination with moist heat at 90 °C The patented automatic decontamination system specially developed and patented for Heraeus incubators ContraCon decontamination routine has been proven in independent independent tests at 90 °C and high and high humidity to eliminate a large number of microorganisms, including mycoplasmas completely eliminated

Year of construction: 2022, Condition: new, Niro-tech RX-150 single shaft paddle mixer This RX-150 is made of stainless steel. The machine allows mixing in both directions. It is equipped with a single mixing shaft and moisture proof button control panel. Motor power 1.5 kW provides 5-48 rot. /min. The tank capacity is 150 liters, which allows filling it with 110 kg of meat. Unloading provided by tilting the drum to about 96 degrees. The mixer adapted to unloading directly to the standard buggies of 200 liters capacity. The dimensions of the machine: 1300 x 700 x 1600 (all in mm) Fgsbshqnppevdt Tfjb

Condition: new, Functionality: fully functional, mileage: 750 km, power: 206 kW (280.08 HP), overall weight: 15,000 kg, fuel type: diesel, color: beige, axle configuration: 4x4, tire size: 14.00 R 20, fuel: diesel, wheelbase: 4,150 mm, brakes: engine braking, driver cabin: sleeper cab, gearing type: mechanical, emission class: euro6, suspension: parabolic leaf (spring), Year of construction: 2023, Equipment: ABS, air conditioning, all wheel drive, compressor, cruise control, differential lock, low noise, onboard computer, parking heater, sleeping cabin, soot filter, NEW VEHICLE without first registration! Special approval for registration available! *WARRANTY EXTENSION to 5 years from first registration optionally possible! In addition to the standard equipment, the following factory options are installed. Differential lock on the driven front axle Rear axle ratio i = 5.72 Spare wheel, dimension corresponds to chassis tires Batteries 170 Ah for Eurocargo Battery disconnect switch mechanically on the chassis, mounted on the battery box Generator 2880 watts (24 volts x 120 amps) Voltage converter 24/12 volts (10.5 amps) Preparation for toll system (OBU), includes third DIN compartment, antenna and wiring on the dashboard, without receiver Front & ramp mirrors are manually adjustable but heated Luxury passenger seat, 4-way adjustable, air-suspended, integrated headrest and seat belt, heated, lumbar support Compressed air connection in engine tunnel console Electronic immobilizer and 3rd vehicle key Luxury driver's seat, air-suspended, heated, multi-adjustable, lumbar and headrest, with integrated 3-point safety belt Iveco radio DAB+, Bluetooth, integrated microphone, mini USB / AUX-in connection, LCD display Air conditioning with manual control Multifunction steering wheel with steering wheel control Pollen filter for driver's cab Rear view mirror for body width 2500 mm Windshield and side windows tinted Protective grille for headlights Sun blinds for side windows, driver and passenger side Sun protection filter integrated in windshield Diesel/air auxiliary heating with timer (Eberspächer, AirTronic D2) heat flow 2.2kW Preparation for rotating beacons Trailer socket for 12 volt operation, 13-pin Trailer socket for 24 volt operation, 15-pin Adaptation of exhaust tailpipe for fords Fuel tank in plastic design, with 200 liter capacity, lockable Fuel pre-filter type Racor with separator, heatable Air tank in aluminum design, number depending on suspension version and trailer version Parabolic spring on the front axle Parabolic suspension on the rear axle End cross member for central axle trailer, D = 190 kN Exhaust tailpipe on the left side CAN bus interface "CAN-OPEN" for body control Air compressor 360 cc, recommended for trailer operation with continuous braking system MICHELIN XZL+ 14.00 R 20 off-road Color: light ivory, IC 074, similar to RAL 1015 Fgsbvdt Tjrwwdgjfjb Purchase / financing / hire purchase / leasing / rental possible. Errors and prior sale reserved! Pictures may contain optional extras at an additional cost! Delivery date by arrangement! Viewing by appointment only! Address only office address, not vehicle location! Our general terms and conditions apply!

Condition: used, Year of construction: 2016, operating hours: 2,680 h, fuel type: electric, Field of application: Construction Empty weight: 6.700 kg Mast: articulated arm Working height: 1.500 cm Max. horizontal reach: 760 m Rental currency: EUR Fobvdouz N N Ast Tfogb Please contact Jan De Lepeleer for more information

Year of construction: 2020, operating hours: 0 h, Condition: as good as new (ex-display), High-pressure cleaning device, high-pressure flushing device, high-pressure built-in flushing device on hot-dip galvanized and painted high-quality steel frame with fork-lift truck lugs suitable for installation in company vehicles. PTC Salmon similar but no Feierabend & Fock, Karo, Leistikow, Müller, Rioned, Rockstroh, Rom, Rowo,... The following models are available: Salmon 60/200 | 60l/min. at 200bar | Engine: Vanguard 35 HP 26kW Salmon 75/150 | 75l/min. at 150bar | Motor: Vanguard 35 HP 26kW Salmon 30/300 | 30l/min. at 300bar | Motor: Vanguard 35 HP 26kW Salmon 45/240 | 60l/min. at 200bar | Motor: Vanguard 35 HP 26kW DIMENSIONS / WEIGHT: Dimensions without water tank LxWxH: approx. 760x1.250x1.200 mm. Dimensions with 400l water tank LxWxH: approx. 1.220x1.250x1.200 mm Dimensions with 800l water tank LxWxH: approx. 1.670x1.250x1.200 mm Empty weight without water tank: approx. 300 kg Fgsbvdt Tsf Arugefjb Empty weight with 400l water tank: approx. 320 kg Empty weight with 800l water tank: approx. 350 kg HIGH PRESSURE PUMP: Manufacturer: HPP Model: CLW Flow rate: max. 60 or 75 l/min. Working pressure: max. 200 or 150 bar MOTOR: Manufacturer: Vanguard Model: 35 HP Fuel: Petrol Max power: 35 HP (26 kW) CONTROL PANEL: Start button Hour meter Electronic fuel gauge LED indicator for oil temperature LED indicator for low lubrication oil pressure LED indicator for clogged air filter LED-indicator for speed measurement LED-indicator for generator LED indicator for spark plugs Emergency stop button ELECTRICAL CONTROL [...]

Condition: used, Year of construction: 2017, operating hours: 3,833 h, fuel type: diesel, motor manufacturer: Volvo Penta TAD 751 GE, Field of application: Construction Fjbvsq Ea Iysdt Tfjgb Empty weight: 3.340 kg Generator capacity: 150 kVA Please contact Sales Department for more information

Condition: new, stroke lenght (max.): max. 400table height: Fußboden bis Tischplatte Oberkante 850daylight: 600speed: Vorlauf 120 mm , Druck 13 - 4 mm, Rücklauf 170/mm/formance of pump: 65 Lt./min (REXROTH - Axialkolbenpumpe)motor: 15 kw - 1500d / minmessurements (LxWxH): 2.100 x 2.400 x 4.300weight approx.: 11.000 Capacity: 1500kN. (150 ton - at 245 BAR) Operating selection: Via key switch Manual / set-up via two-hand operation without light sensor fuse on front side (rear side always active) Automatic via two-hand operation at full speed (with active light sensor fuse) Main cylinder: Ø 270mm. Auxiliary cylinder: 2 pcs. Ø 70 x 50mm. Fgobvdtsmpfwde Tfjb Motor: 15kw. - 1500d/min. (IE-3) Pump: 45cc. - 65Lt./min.   REXROTH - axial piston pump Speed: flow 120mm. - Pressure: 13 - 4mm. - Return 170mm./sec. Clearance: 1300mm. Table top: 1200 x 800 x 90mm. - with T - grooves ram plate: 1200 x 800 x 600mm. - with T - grooves & ribbing Installation height: 600mm. (max. distance between table & ram plate) Stroke length: max. 400mm. Table height: 850mm. (Floor to table top upper edge) ----- Hydraulics: (Hydraulic accessories on top of the press) Kontrol Block & Valves (REXROTH Proportional Valves) Prefill valve (NG.125) 8 way guide Hydraulic ram safety device Mechanical ram safety device for TDC position Pressure adjustment via PLC. Speed adjustment via PLC. Pressure stop valve for 600 sec. Air cooler Automatic lubrication for guides Auxiliary motor Auxiliary pump Control system: Main control box (mounted on the side of the press frame) Pivoting control panel SIEMENS S7 - 1200   KTP. 9 SIEMENS screen (language selection DE.- ENG.) Safety PLC. (SICK) Light sensor for front & back of work area (SICK 750 + 150mm.) Soft starter Two hand operation (Movable) SECOMEA Ethernet connection Ruler for setting the stroke length (450mm. - NOVOTECHNIK 16BIT) Workspace lighting (2-fold IP-66)   8 free ON & OFF outputs on the PLC. for external connections ----- Protective railing around the hydraulics Lateral ladder ----- Documentation: Operating manual DEUTSCH(1 fold paper & 1 fold USB.) Hydraulics & control diagrams Parts lists CE. Certificate Standard :EN.16092/1/3 ----- Total dimensions: approx. 2400 x 2100 x 4100mm Total weight: approx. 11.000kg. Painting: frame RAL 7035 light grey, railing & hydraulics RAL 7016 anthracite grey. -----

Condition: used, power: 220 kW (299.12 HP), color: other, Year of construction: 2014, operating hours: 11,920 h, Field of application: Construction Empty weight: 26.100 kg Make of engine: Volvo D 13 J Febvdep H Sfiot Tfogb Serial number: VCEL150HPE0004134 Transport dimensions (LxWxH): 7.07x2.96x3.58 Please contact Sales Department for more information

Condition: new, die cushion press capacity: 30die cushion returning speed: 52die cushion stroke: 200daylight: 750pressure: 150stroke: 500 Febvded Ab Iljt Tfegb

Condition: new, More technical data on request ht curtain manual and automatic working manual stroke adjustment by camshaft switch maintenance free self lubricating 4-fold ram guiding polster plate with T-slots according to CE rules Febved Ab Igjdt Tfjgb press force:150 tohydraulic pressure:254 bartable:1200 x 750 mmram dimension:950 x 650 mmhole in table:120 mmstroke:300 mmdistance ram-table:550 mmrapid speed:100 mm/sworking speed:5,5 mm/sreturn speed:165 mmmotor:11 kWlength:2.225 mmwidth:1.600 mmheigth:3.650 mmweight:8.200 kg