Used Akerman H16D Lc for sale (9,326)

Year of construction: 2001, Condition: used, Technical description: Operating side: right working height: 900 mm, adjustable: +/- 50mm Nominal width: 1.400 mm Eff. working width: Nominal width - 100 mm Transport Glaet roller Material workpiece: wood, wooden material, inflexible Dimensions (min.) thickness - width - length: 5 - 50 - 300mm Dimensions (max.) thickness - width - length 80 - 1300 - 2000mm Tolerance max. over roller width +/- 0,2mm Total connected load: approx. 1,5 kW Mains voltage: 400 V / 50 Hz with loadable N-conductor Operating voltage: 400 V / 50 Hz Operating pressure: 6 bar, min. 5 bar, max. 8 bar Weight: approx. 1.300 kg Dobvrobwc Dvor S Usut Machine without switch cabinet, because integrated in machine line!

Condition: used, Year of construction: 2020, operating hours: 1,200 h, Metal Color Kicker Separator for separating colored objects from material streams using an RGB camera or separating aluminum or copper from material streams using a metal sensor. Description: Dujbvroqwyx Ier S Ujt The system, consisting of a feed chute with feed hopper, a feed plate, an acceleration belt, a sensor and camera system with particularly high sensitivity and a highly efficient flap system, was developed to separate a wide variety of materials from a waste stream. The fed material is evenly distributed on the conveyor belt of the metal kicker. At the end of the belt, the parts (> 1 to 2 mm, useful from approx. 5 mm, adjustable) are detected, analyzed and deflected out of the material flow by a highly sensitive, spatially resolving metal sensor and camera. This is done by our patented electrodynamically driven flaps. These flaps are arranged parallel to the discharge edge of the conveyor belt. Each flap is assigned a sensor/channel. 1. metal/color kicker 400: - Belt length (center distance): approx. 4,000 mm (extended version) - Conveyor width: approx. 400 mm - Total machine width: approx. 700 mm - Feed height: approx. 1,700 mm (incl. acceleration plate) - Drive: drum motor, according to requirements (usually 2.2 KW) - Electrical power: according to requirements (usually: 400 V / 50 Hz, approx. 2.2 kW, for the entire machine) - Number of flaps: 16 (flap arrangement: bottom) - Spare flaps: 1x for exchange and replacement in case of defect - Number of tracks: 16 - Integration: Metal sensor, for the detection of metals RGB camera, for identification of colors (in the first year all color programs are included, after that new color programs can be created at a price of 250,- EUR) - Collecting funnel: incl., according to requirements - Acceleration plate: incl. - Color: RAL 5021 2. switch cabinet: always adapted to the conditions on site, brand Rittal, with cooling fan, connections according to the requirements on site (normal 400 V / 50 Hz), integrated in the machine

Condition: not inspected (used), Year of construction: 2007, cutting length (max.): 3,400 mm, Double-blade veneer scissors with integrated gluing unit Manufactured by Fisher & Rückle / Monguzzi Type Pulchra 3400 Double-knife jointing shears with automatic gluing - 2 work steps in one machine! Year of manufacture 2007 Cutting length along the grain 1050 - 3400 mm Cutting width across the grain, continuous 65 - 450 mm Cutting width across the grain, discontinuous 450 - 800 mm Veneer strip thickness approx. 0.4 -1.5 mm (depending on the veneer) Capacity: Number of bundles continuous approx. 2.5 bundles / minute Number of packages discontinuous approx. 1.5 packages / minute Dujbvrjunifvor S Uet Glue application PVAx / UREA Glue filling quantity approx. 2x 1.5 l, with glue cooling Max. glue application speed approx. 38 m/min. Connected load approx. 25 kW Compressed air 6 bar Air consumption 70 NL Weight approx. 19,000 kg Data partly estimated. The video shows a new machine with the same equipment.

Year of construction: 1999, Condition: ready for operation (used), Year of manufacture: 1999 Djbvrrevl Hc Dj S Ujut Parts counter: 33,158,945 Scope of delivery: - gamma 333 - Accessories / spare parts - Attachment for cable in barrel storage

Condition: like new (used), Year of construction: 2019, AMADA - LCG3015AJ - 2019 as good as new - control system: AMADA Dsbsiv S Nqsvrr S Ujut - fiber laser 2100 W - table size: 3000 x 1500 mm ( x 2 ) - operating time: 300 hours - documents - weight: 9400 kg - under power Due to high office costs (customs regulations) we do not deliver to Turkey Turkey, Iran, Russia and Belarus.

Condition: excellent (used), Year of construction: 2018, CNC cross-cutting system from the machine manufacturer PAUL for use in series production and industrial operations designed for small and medium cross-sections, high cycle rates use in sawmills, as well as in the flooring, box and furniture industries roller/belt feed cross-cutting saw Paul type C11 saw blade diameter 500 mm Duebjvn Ncrsvrr S Ujt bore diameter 70 mm speed 4300 /min cutting height [mm] 3 - 89 passage width [mm] 30 - 200 workpiece length min. [mm] 300 with manual feeding 1 300 with automatic feeding wood cross-section [mm] see cutting diagram fixed length min. (wood end) [mm] 130 (180)

Condition: good (used), Year of construction: 2005, Manufacturer: Trane Dujbvrsk Abw Tor S Ust Type: CLCE 1810 Year: 2005 Overall dimensions: 3330 x 1900 x 2000 mm Suction side dimensions: 900 x 900 mm Fan: Manufacturer: Nicotra Type: VRE RDH 710 K1 Maximal drive power: 37 kW Maximal rev: 1700 1/min Electromotor: Manufacturer: Tee Electric motors Type: QU 200 L4C-40 H Electric power: 30 kW

Condition: used, Manufacturer: Carl Kurt Drum diameter: 700 mm Dsbvrou Abr Eer S Uout Motor: 1 kW

Condition: used, Year of construction: 1998, MADA laser cutting machine Debvrrjuruuqe S Ueut Model: LC1212A2 Year: 1998 Laser power: 2kW Power supply: 13 kVA Weight: 4900Kg

Condition: good (used), Year of construction: 2010, laser power: 4,000 W, Trumpf 5 axis laser machine, Year of manufacture 2010, Siemens control, Dusbvrr Sovbdy Ee Uot travel X/Y 4000/1500 mm, 1 burning head, laser power 4 KW, Laser On 47950 hours, beam on 6200 hours, ADC cutting head 155 mm, Positioning laser diode, Teach panel, power cycles, Trumpf remote connection, Machine weight approx. 19,000 kg,

Year of construction: 2018, operating hours: 3,000 h, Condition: good (used), Functionality: fully functional, Object description: - Vulcan II EMS-CD48L 4WD chassis dynamometer to cover the European / American markets (OVC, ECE-R 101 / 40 CFR, SAEJ1711) - Test execution conforms to US specification "Dynamometer Performance Evaluation and Quality Assurance Procedures" of the AAMA, as well as the requirements of all current global guidelines - Commissioning July 2018 - The offer does not include emission measurement technology - Automation: Sparc Vehicle and Stars Vets Testing of vehicles with: - Electric drives - Electrified/hybridized drives - Conventional drives - Drives with alternative fuels Technical data: Center distance: 1.8 to 3.4 m Distance between inner and outer roller edges approx. 800 / 2,300 mm Axle load: 2,500 kg Speed_max: 250 km/h Air blower 160km/h 96,000m³/h / Conformity: GTR15, EPA without AC17 or SC03 Performance data 2WD Gen. Drive power, rated power (surge load) [kW] 230 (450) Engine drive power, rated power (shock load) [kW] 230 (450) 4WD (sum of front and rear axle) "Gen. Drive power, rated power (impact load) [kW] e.g. with the following distribution between front / rear axle" 460 (600) 50/50 230 / 230 (300 / 300) 60/40 230 / 230 (360 / 240) 70/30 230 / 230 (420 / 180) "Mot. drive power, rated power (impulse load) [kW] e.g. with the following distribution between front / rear axle" 420 (560) 50/50 210 / 210 (280 / 280) 60/40 230 / 190 (336 / 224) 70/30 230 / 190 (392 / 168) *Load cycle impact load "Max. 30 seconds every 300 seconds" Tractive force measurement: Gen. Tractive force, rated power (impact load) [N] 0 ... 6400 (12500) Dujbvrrsuhn Ege S Ust Mot. tractive force, rated power (impact load) [N] 0 ... 6400 (12500) Total measurement uncertainty (typ.) [N] ≤ 2 Repeatability [%] of the nominal measuring range ±0.05 Hysteresis [%] of the nominal measuring range ±0.1 Linearity [%] of the nominal measuring range ±0.1 Overall accuracy [%] of nominal measuring range ±0.1 Control accuracy tensile force stationary [%] of nominal measuring range ±0.2 Tractive force control time according to EPA 97-04 method 1 [ms] 65 Speed accuracy [km/h (mph)] from actual value ±0.08 (0.05) Control accuracy speed stationary [km/h] ±0.01 Mass simulation "Simulable vehicle mass [kg] for the following driving cycles in 2WD mode" - US 06 (amax. = 3.76 m/s²) 450 ... 2760 (4370) - SC 03 (amax. = 2.28 m/s²) 450 ... 3390 (5630) - HDUDDS (amax. = 1.96 m/s²) 450 ... 4090 (7040) - FTP 75 (amax. = 1.72 m/s²) 450 ... 4690 (8230) - NEDC 2000 (amax. = 1.04 m/s²) 450 ... 5540 (9930) in 4WD mode - US 06 (amax. = 3.76 m/s²) 750 ... 2760 (4370) - SC 03 (amax. = 2.28 m/s²) 750 ... 3390 (5630) - HDUDDS (amax. = 1.96 m/s²) 750 ... 4090 (7040) - FTP 75 (amax. = 1.72 m/s²) 750 ... 4690 (8230) - NEDC 2000 (amax. = 1.04 m/s²) 750 ... 5540 (9930) Further pictures, videos and inspection on request.

Condition: used, Year of construction: 2015, Unladen weight 938kg Transport width 2.65m PTO shaft hydr. displacement / Dusbvrrjucqbae S Uot

Condition: refurbished (used), Functionality: fully functional, type of input current: three-phase, The MaxiFil Clean extraction unit has a self-cleaning filter in combination with contamination-free welding fume extraction. Together with its high mobility and an operating radius of 360 degrees, it is ideal for continuous use during welding. The unit has been fully inspected in the factory and has lighting in the hood. Dsbvrr Sstyaqnj Ueut

Condition: new, 6X2 chassis, Automatic transmission, Retarder, FASSI 345 5+3 crane with radio control and Industry 4.0, 3-sided tipper, NEW READY FOR DELIVERY Dujbvjvr Trxsrr S Uot

Condition: new, Year of construction: 2025, machine/vehicle number: 421159679, Mobile jaw crusher on crawler track VULCANO crusher is the most modern and compact machine of the last generation in the 25 tons category. The feed hopper with roadworthy loading dimensions and the possibility of folding the conveyor belt, which allows transport also on trailers, make it versatile in transports and equally fast in start-up. From the arrival at the site to the moment of the start of the crushing operations, only the time necessary for warming up elapses. Equipped with the latest generation of control and operating systems, it is simple and user-friendly, and also environmentally friendly. The HCS (Hydraulic Crushing System) control system actively supports the automatic operation of the machine, guaranteeing it the highest profitability in terms of maintenance costs and productivity, making it incomparable. Dobshd I Sbjvrr S Usut The structural reinforcement between the frame and the crusher gives the machine maximum robustness to stresses. The particular design of the supporting structure guarantees excellent access to all parts of the machine during maintenance operations. The GI CRUSHER VULCANO certainly offers convincing and incomparable performances both in operations on natural stone and in recycling, as well as for rentals. Production capacity: approx. 190 TO/H Patented HCS system Proportional distributor with \"Load Sensing \" for an optimization of the system and a reduction fuel consumption by approx. 30%. Pre-screening optional gap size hydraulically adjustable also during crushing operation fast blocking system with wedges and folding cylinders unloading height 2750 mm dust extraction system tank pump magnetic separator warranty 1 year up to max. operating hours from the start of operation of the equipment Technical data: Jaw crusher 830 x 580 mm crushing gap from 30 to 160 mm feed hopper 3,5 m³ - 1800 x 2970 mm grizzly feeder 770 x 2750 mm Main conveyor belt 800 x 8700 mm 4 cylinder constant speed diesel engine 82 HP/60 KW, exhaust stage V Control panel chain drive 400 x 2920 mm Weight: kg Transport length 10850 mm or 9170 mm with folding discharge belt Transport width:2520 mm transport height 3100 mm Further information Purpose: construction, Drive: caterpillar

Year of construction: 2018, Condition: excellent (used), We are selling a 2-line 1/6 fold napkin machine with 2-colour printing. The machine's been used but it's in very good working condition. Manufacturer: Wangda Industrial Co., Limited Fujian Top Machinery Manufacturing Co., Ltd Dusbvrjhpz Eber S Ujt Napkin - Open Size: 330 x 213 mm Napkin - Folded Size: 165 x 93 mm Jumbo Reel Max Width: 660 mm Jumbo Reel Max Diameter: 1100 mm Raw material gsm: 13 - 16 gsm (2ply) or 19 - 23 gsm (1ply) Raw material core diameter: 76 mm Working Speed: 400-500 pcs per lane (2 lane speed is 800-1000 pcs) Power: 380V/50Hz Steel to Rubber embossing. 2 colour printing unit. One jumbo roll unwind stand. If you're interested or have any questions please don't hesitate to contact us.

Condition: used, mileage: 650,450 km, power: 287 kW (390.21 HP), first registration: 05/2005, overall weight: 26,000 kg, fuel type: diesel, color: white, axle configuration: 3 axles, maximum load weight: 14,240 kg, empty load weight: 10,760 kg, tire size: 315/80 r22,5, wheelbase: 4,800 mm, brakes: intarder, driver cabin: sleeper cab, gearing type: automatic, emission class: euro3, suspension: air-lift, loading space volume: 40 m³, loading space width: 2,460 mm, loading space length: 7,400 mm, loading space height: 2,170 mm, machine/vehicle number: 313, Equipment: ABS, additional headlights, air conditioning, cruise control, differential lock, low noise, parking heater, spoiler, trailer coupling, Automatic air conditioning Dujbvrr Sendlhzj Ust Mounting for forklift at the rear of the vehicle Air-sprung cab Central lubrication 1 couch Errors excepted

Condition: used, Year of construction: 2018, Headstock for front and rear attachment Hydraulic side shift / support roller Counter blade Special black paint finish Skid shoes PTO shaft / Djbvrjual S Ujr S Ujut

Condition: good (used), Year of construction: 2010, Functionality: fully functional, measuring range X-axis: 250 mm, measuring range Y-axis: 200 mm, measuring range Z-axis: 200 mm, Software: QVPAK V10.005 Dobvrsu Sqmdjr S Usut

Year of construction: 1997, Condition: used, Technical Data Spindle taper ISO 50 DIN 69871 Longitudinal stroke 3000 mm Slide stroke 1000 mm Transversal stroke 1000 mm Vertical stroke 1500 mm Table size 3500x920 mm Spindle speed 4000 rpm Spindle power KW. 27,5 Dsbvrog Amzksr S Ujut Non binding data to be verified / Data must be verified Standard equipment CNC SELCA 3045 AUTOM.BI-ROTARY HEAD (A-AXIS 1° - B-AXIS 1°) 30 POS. HORIZONTAL AND VERTICAL TOOL CHANGER SWARF EVACUATION

Year of construction: 2006, Condition: like new (used), - Power operated three jaw chuck D400 - Large bore D168 Dobvroh Igt Eor S Ueut - Centrifugal force compensation - Base jaw connection serration 1/16", 90° - incl. jaw sets => Jaw chuck was only used for a few days

Condition: good (used), Year of construction: 2016, Offered is a vertical CNC-turning machine VLC 100 with the year of manufacture 2016. The machine is ideal for the production of chuck parts with a diameter of max. 100 mm. With its integrated automation and the pick-up spindle, the machine is characterized by short distances and ensures short chip-to-chip times. Debvonmywkorr S Ujut CONTROL Siemens 840 DSL TECHNICAL DATA Workpiece diameter: max. 100 mm Workpiece height: max. 150 mm Chuck diameter: 160 mm Swing diameter: 210 mm Strokes X / Z: 650 / 375 mm MAIN SPINDLE power (40% / 100% ED): 16.7 / 14.5 kW torque (40% / 100% ED): 74 / 55 Nm speed: max. 6,000 rpm Rapid-traverse rate X / Z: 60 / 30 m/min TOOL CARRIER EMAG wheel turret, 12x BMT55 for driven tools Price, delivery time and equipment of the machine on request.

Condition: good (used), Year of construction: 2010, Functionality: fully functional, Steam phase, batch machine, including medium, external computer with control for the program sequence, external cooling for operation without other cooling water supply, replacement pump, stand-alone device, no compressed air required Dsbvrjup Hayor S Usut

Condition: used, Year of construction: 2024, spiral disc suspension telescopic drawbar cat. III/IV hy hydraulic / front level board air brake DSTS roller lighting rear harrow DSTS roller / Duebvrstt I N Ijr S Ust

Condition: used, Year of construction: 2023, spiral disc suspension telescopic drawbar cat. III hydr. air brake / harrow DSTS roller lighting certificate for type approval / Dusbvrr Sjr Nxy Ne Ust