Used Akerman H16D Lc for sale (9,349)

Condition: ready for operation (used), Sillmann EDM LCD12L-CACS-SIL monitor from AGIE machine SN: 1183, serial number as per photo, used, good condition, 100% functional, scope of delivery as per photos Dcjlqyei D Tvcehyksg

Condition: as good as new (ex-display), Year of construction: 2025, sliding table length: 3200 mm cutting width at the fence: 1350 mm cutting width at the cross cut: 3200 mm cutting depth: 125 mm scoring unit: ja sawblade diameter: electric tilting adjustment sawblade: electric adjustment fence: manuell readout sawblade tilting: Scala read out sawblade height: - read out fence: Scala read out crosscut stop: Scala sawblade diameter: 400mm number of speeds: 3000 / 4000 / 5000 U/min motor power: 7 kW motor brake: yes, automatic suction connection: 80mm und 120mm machine length: 3400mm machine width: 2000mm weight: 900kg Dcslqyhyogfm Efskog

Condition: used, overall weight: 42,000 kg, maximum load weight: 33,083 kg, axle configuration: 3 axles, loading space length: 12,680 mm, loading space width: 2,400 mm, loading space height: 2,434 mm, loading space volume: 74 m³, first registration: 10/2021, next inspection (TÜV): 10/2025, Year of construction: 2021, total width: 2,550 mm, total height: 3,810 mm, Equipment: ABS, STAS 3-axle HardoX steel tipper 74 m³ First registration 10/ 2021, from 1st hand Dimensions in length (LxWxH) 12,680 x 2,330/ 2,430 x 2,434 mm (conical design) Unladen weight 8,917 kg Floor in 5 mm HardoX steel HB450 throughout End wall and side walls in 3 mm HardoX steel HB450 Straight front wall, interior with access ladder Rear portal doors 50:50, pneumatic rear release Reinforced roll-up roof tarpaulin HYVA tipping ram type Alpha, low pressure 2x pneumatic vibrators JOST cranked saddle supports, full load SAF axles with large disc brakes, 430 mm 1st axle LIFTACHSE Dcjlqyswhd Etohykog WABCO Trailer EBS with skid protection RSS WABCO Smartboard new model Lifting and lowering device Automatic tilt lowering 6-wheel 385/55 R 22.5 tires ALCOA Dura-Bright high-gloss aluminum rims Aluminum leaning ladder Shovel and broom holder Tool box left 4x LED reversing lights RENTING is the new BUYING, also available from us immediately as a full-service rental -----

Condition: new, power: 116 kW (157.72 HP), fuel type: diesel, color: orange, Year of construction: 2025, operating hours: 4 h, Equipment: air conditioning, General information Field of application: Construction Technical information Track width: 60 cm Empty weight: 22.200 kg Make of engine: DL06A Functional Bucket capacity: 0,92 m³ Condition General condition: very good Technical condition: very good Visual appearance: very good Other information Dipper / stick length: 290 cm Emission level: Stage IIIA / Tier III Delivery terms: EXW Transport dimensions (LxWxH): 9,5x2,99x3,2 Production country: KR Additional information Please contact Jeroen Heindryckx, Bart Apers or Matthias Eyckmans for more information CE marked - No CE Certificate available Dcjlqswf Ui Royhyksg

Condition: good (used), Code: 0065 Brand: STOERI MANTEL - CZECH REPUBLIC Model: KP 500 OPTIM - CE Standard Electronic pusher cut-off line with optimisation and defection of wood, suitable for joinery workshops, wooden joinery, semi-finished wood products, furniture, wooden packaging, garden furniture, parquet, and various - CE Standard Blade diameter mm 500 F30 Max revolutions 5000 Motor power Hp 7,5 Adjustable displacement speed Adjustable blade height Max precision tolerance +/- 0,5 mm Frontal pneumatic workpiece holding pressure Integrated control panel Control software SM OPTIMAL Working table height mm 850 Dcolqyhev Rf Ageykeg Max cutting height mm 130 Loading device Table loading capacity up to mm 6000 Working table inclination 8° Movement speed mt/min 0-15 Return movement speed mt/min 0-100 Control unit AC SERVO Linear axis with integrated toothed belt Outfeed table Outfeed table length mm 2500 Workpiece ejector Suction ports N° 2 diameter mm 120 Compressed air 8 bar Overall dimensions of assembled machine mm 8300 x 1000 x 1700 h Overall dimensions for transport : Machine mm 1100 x 1150 x 1700 h - Pusher mm 6800 x 800 x 1200 h - Outfeed table mm 2550 x 550 x 900 h Weight kg 1500

Condition: used, Year of construction: 2019, operating hours: 5,630 h, Field of application: Construction Serial number: HCMDBS5XC006001xxxx Please contact ATS Norway AS for more information Please provide reference number upon request: 20196 Specifications: Certified to Model year: 2019 Hours: Approximately 5,630 Power: 128 kW Net weight: 20,800 kg Belt width: Approx. 60 cm Machine width: Approx. 275 cm Undercarriage: See pictures Quick release: Gjerstad S70 Buckets: Sanding bucket and digging bucket Rotor tilt Leica GPS system Central grease Hammer hydraulics Rear view camera Additional work light Radio/CD Air conditioning / AC Description:Hitachi ZX190LC crawler excavator from 2019 with approximately 5,630 hours.The machine is delivered with both a sanding bucket and a digging bucket , a tiltrotator , and Leica GPS .The machine is equipped with central grease, hammer hydraulics and a reversing camera.Ready for delivery at short notice. Hours: 5630 Dcolqyswdu D Eohykeg Total Weight: 20800 Width: 275 Kw: 128

Condition: new, Brugger FMP 225 Forestry Mulcher - New, 225 cm working width, ideal for heavy-duty mulching work! The Brugger FMP 225 is a robust forestry mulcher for use in agriculture, forestry, and fallow land. With its dual belt drive, 32 carbide-tipped blades, and hydraulic equipment, it's ideal for tractors with 110 hp and above – reliable, powerful, and ready for tough applications. Technical Specifications – Brugger FMP225: Working width: 225 cm Drive: Double belt drive (5 + 5 V-belts) PTO speed: 1000 rpm Power requirement: 110 – 160 hp Weight: approx. 1,800 kg Attachment: Three-point hitch, CAT II / III Italian CMR transmission Rotor shaft diameter: 219 mm (465 mm with blades) Blades: 32, carbide-tipped Dcjlqewhyzwjyhykeg Working depth: -70 mm / -30 mm / +10 mm (3-way adjustable) Housing: 8 mm wall thickness, 12 mm side panels Hydraulic connections: 2x double-acting (1x for flap, 1x for crop clamp) Equipment: Hydraulic tailgate & crop clamp Included: PTO shaft Prices + VAT: Brugger FMP180 180cm - 30 hammers, 1,600kg = €10,900 Brugger FMP200 200cm - 32 hammers, 1,700kg = €11,900 Brugger FMP225 225cm - 36 hammers, 1,800kg = €12,900 ----- Contact us for a customized quote!

Condition: used, Year of construction: 2021, operating hours: 1,725 h, 2021 | Doosan | Doosan DX140LCR-5 with Lehnhoff SW10-3 quickcoupler (without bucket) | Used Tracked Excavator | 1725 hours 📍Location: Germany, Kempten (Allgäu) 🚛 We Deliver to your destination – Estimate the shipping cost with our calculator! Delqyjwg Inijhykscg 💰 Buy Now for EUR 87500 or Make an Offer. Request payment at delivery for an affordable fee! (subject to approval)* 👷‍♂️ Inspected by an independent expert 66 inspection points 64 approved ✅ 1 imperfect ℹ️ 1 issues ⚠️ 📌 Inspector's Comment: After maintenance perfect ❓Want the Full Inspection Report, Extra Photos & a Video? 🔍 Search this on Google for full details!: "37602 Equippo" 💡 Why Buy from Us? ✔ Fully inspected machines ✔ Delivered to your jobsite ✔ Money-Back Guaranteed ✔ Safe payment methods with possibility to pay at delivery ❓Got machines to sell? Contact us for a free evaluation

Condition: new, Siemens 6FX1138-6BL01 PLC 135WB/ACOP, 256KB RAM E-Stand: C SN:1359 ,unused in opened original box, 100% working, scope of supply according to photos Dcjlqyoi Ed S Eohykjg

Condition: used, Year of construction: 2017, x-travel 1000 mm y-travel 600 mm z-travel 600 mm table surface area 1200 x 600 mm turning speeds SK 40 - 10.000 U/min tool magazin: 40 Plätze coolant IKZ + Blasluft chip conveyor Scharnierband measuring feelers - electric M & H total power requirement 30 kVA weight of the machine ca. 8,5 t dimensions of the machine ca. 5 * 2,5 * 3 m Movie: Dcjlqsvw D Eaeyhykog ?v=QwbrBuo8EiE Special price for ex works / self-collection

Condition: good (used), Doosan Model S 550L CNC Lathe Year 2006 Control Fanuc 21T Swing over bed 710.0 mm Max turning dia 550.0 mm Max turning length 1130.0 mm Chuck dia 400.0 mm Spindle bore 102.0 mm Dolqyhswhykleykjcg Spindle nose 6 mt Spindle speed 30 – 2500 rpm Spindle motor power 22 kw Turret 12 stations, Feeds 0.001 – 133 mm/rev Rapid X 20m/min Z 24m/min Bar capacity 90.0 mm Tailstock Swarf conveyor Steady Rest Manuals

Condition: new, pressure 135 t chamfer lenght 3100 mm distance between columns 2600 mm column arm 410 mm ram stroke speed 200 mm/sec work speed 10.0 mm/sec return speed 120 mm/sec work stroke 275 mm dayligth 550 mm table height 900 mm table width 90.0 mm oil volume 200 ltr. voltage 400 Volt total power requirement 11.0 kW weight 8650 kg range L-W-H 4250 x 2050 x 2800 mm ----- Press brake with special equipment * increased installation height * increased cylinder stroke * as well as increased bending beam speeds ----- Furnishing: - DELEM CNC control model DA-58T graphic/touch screen * 2D graphical programming * 15" TFT color screen with high resolution * Bending sequence calculation * Product programming and real size display * USB interface - Motorized backgauge with R-axis, on ball screws - X = 800 mm R = 250 mm with 2 stop fingers - controlled axes Y1 - Y2 - X - R - C (crowning) - electr. Crowning controlled by CNC - Deer foot upper tool with PS 135.85-R08, system "A" with quick-change clamp - additional crowning device in the tool holder of the upper tool - 4V universal die block M 460 R with die shoe 60 mm mount - BOSCH/HOERBIGER hydr. components - SIEMENS electrical system - LEUZE light barrier behind the machine - FIESSLER AKAS laser with FPSC protection device v.d. machine Dcelqyhyot D Hmiekjg - Swiveling control panel, mounted on the left - 2x front support arms "Sliding-System", with T-slot and cam - 1x double foot control - CE mark / declaration of conformity - Operating manual: Machine and control in German - Safety manual : press brakes

Condition: new, Brugger FMP 225 Forestry Mulcher - New, 225 cm working width, ideal for heavy-duty mulching work! The Brugger FMP 225 is a robust forestry mulcher for use in agriculture, forestry, and fallow land. With its dual belt drive, 32 carbide-tipped blades, and hydraulic equipment, it's ideal for tractors with 110 hp and above – reliable, powerful, and ready for tough applications. Technical Specifications – Brugger FMP225: Working width: 225 cm Drive: Double belt drive (5 + 5 V-belts) PTO speed: 1000 rpm Power requirement: 110 – 160 hp Weight: approx. 1,800 kg Attachment: Three-point hitch, CAT II / III Italian CMR transmission Rotor shaft diameter: 219 mm (465 mm with blades) Blades: 32, carbide-tipped Working depth: -70 mm / -30 mm / +10 mm (3-way adjustable) Housing: 8 mm wall thickness, 12 mm side panels Hydraulic connections: 2x double-acting (1x for flap, 1x for crop clamp) Equipment: Hydraulic tailgate & crop clamp Included: PTO shaft Prices + VAT: Brugger FMP180 180cm - 30 hammers, 1,600kg = €10,900 Brugger FMP200 200cm - 32 hammers, 1,700kg = €11,900 Dolswhyw Eeqyhykocg Brugger FMP225 225cm - 36 hammers, 1,800kg = €12,900 ----- Contact us for a customized quote!

Condition: excellent (used), Year of construction: 2021, Functionality: fully functional, Technical details max. workpiece diameter 400 mm workpiece length - max. 300 mm Control SIEMENS 840Dsl swing diameter 520 mm chucking diameter 500 mm travel x / y / z 995/+,-30/580 mm Additional information Operating hours (total): 1848 hours 1.2.2 BASE TURRET UNIT AND Y-AXIS SLIDE UNIT The Y-axis slide unit is mounted on the side of the machine base. A fast-reacting, position-controlled, and maintenance-free servo motor is used for the axis drive. It drives the slide via a high-precision ball screw. A linear measuring system is built into the Y-axis. Positional accuracy: 2 µm. BASE TURRET UNIT Shortest swivel times thanks to direct swivel drive, cooled for consistent accuracy. MAIN SPINDLE 37.7 KW 1.2.3 HP TURRET DRIVE UNIT FOR DRIVED MACHINE TOOLS (C442) With internal coolant supply to the tool.* Max. speed 6,000 rpm Crosscut speed 3,200 rpm Torque at 100% duty cycle 54 Nm/18.1 kW Torque at 40% duty cycle 83.6 Nm/28.0 kW Torque at 10% duty cycle 100 Nm/33.5 kW 1.2.4 TOOL CARRIER UNIT FOR DRIVED TOOLS TOOLS, 12xBMT75 for BMT75 tool holders 1.2.6 ROTATING WORKPIECE TRANSPORT SYSTEM, O-TYPE Drag frame system for 10 workpieces Max. workpiece height (including workpiece pallet) 300 mm Max. workpiece weight 60 kg 1.2.7 SET (10 pieces) DRAG FRAME for O-type belt For workpiece diameters 150 - 400 mm 1.2.8 BLOW-OFF OF THE WORKPIECE AND THE CLAMPING DEVICE (PICK-UP) Dcjlqowgan Ujyhyksg 1.2.10 COOLANT SUPPLY 15 bar Coolant pump flow rate approx. 80 l/min at 15 bar. COOLING UNIT (6.5 kW, water-air) A cooling unit (with dual-circuit technology) regulates the machine's thermal balance. The spindle drive, control cabinet, and turret are kept at ambient temperature (10°C - 40°C). Cooling capacity: 6.5 kW 1.2.11 COOLANT DOUBLE FILTER, MANUALLY SWITCHABLE Filter fineness 100 µm, with electrical and mechanical contamination indicator 1.2.12 CHIP CONVEYOR, HINGED BELT VERSION - REAR-FACING Chip discharge height 1100 mm. /With integrated coolant reservoir, capacity approx. 500 l. 1.2.13 EMULSION MIST EXTRACTION Extraction capacity approx. 800 m3/h 1.2.14 FLUSHING GUN 1.2.16 WORKPIECE MEASUREMENT with a measuring probe that is completely protected from chips and coolant outside the work area. 1.2.17 BLOW-OFF PROBE 1.2.19 ENGRAVING SOFTWARE PACKAGE 1.2.20 TOOL LIFE MONITORING - SISTER TOOL MANAGEMENT 1.2.21 TOOL BREAKAGE MONITORING TOOLINSPECT MCU - EUROPE (SIEMENS 840DSL, FANUC 31i/32i) 1.2.23 3-COLOR INDICATOR LIGHT 1.3.2 AXIAL DRILLING AND MILLING HEAD - BMT75 CC 1.3.3 ANGLE DRILLING AND MILLING HEAD 90° - BMT75 CC (i=1:1) 1.3.4 TOOL SET FOR OP10 + OP20 1.3.7 HYDRAULIC FULL-CLAMPING CYLINDER SIZE 150 - with 1 media feedthrough The coolant is supplied to the workpiece through the main spindle and the clamping device. 1.3.10 3-Jaw Power Chuck KNCS-N 500-155 Quick Change n max. = 2200 rpm (Recommended speed according to DIN 6386) - Set of hard base jaws - Set of soft top jaws 1.3.11 Attachments for KNCS-N 500-155 Consisting of: - Chuck flange DIN 55026 A11 - Drawbar adapter with through-hole and shut-off valve for central air or coolant supply - Mounting screws 1.3.12 Irrigation nozzle in chuck bore Additional tool holders with tools

Condition: new, Fanuc A20B-3300-0120 / 02A - A20B-3300-0120 /02A PCB-Axis Control Card, serial number as per photo, unused in original packaging, 100% functional, scope of delivery as per photos Dslqyji D U Hhshykscg

Condition: good (used), Electric motor, three-phase motor -Power: 0.75 kW -Speed: 1390 rpm -Shaft diameter: 19 mm -Design: B5 -Protection class: IP 54 -Quantity: 1 piece available -Price: per piece Dcolqyhodd H H Njykog -Dimensions: 325/200/H225 mm -Weight: 15 kg

Condition: good (used), Nagel Citoborma 180 Paper Drill The device is 100% functional. This is the latest model. The drill table is adjustable in every plane (sides, front/back). It has limiters for setting the drilling spacing. The installed table is in an enlarged version. Additionally, the drill has an automatic table lock, which is released after each cycle. The machine has a convenient cabinet that allows for convenient waste collection. Dcelqyhyowh Nqzskjg Very good condition. Solid construction – weight 65kg. 380V power supply One drilling head. Drill diameter 2-20 mm. Stack height 60 mm. The machine has been inspected. The set includes drills and tools, a new stick, and an instruction manual

Condition: good (used), power: 141 kW (191.71 HP), fuel type: diesel, color: orange, Year of construction: 2016, operating hours: 8,317 h, Equipment: air conditioning, General information Field of application: Construction Serial number: DHKCEBBWTG0001283 Technical information Track width: 60 cm AdBlue system: Yes Make of engine: DL06P Empty weight: 25.100 kg Condition Technical condition: good Visual appearance: good Other information Dcjlqyhewfmm Ieykeg Emission level: Stage IV / Tier IV final Delivery terms: EXW Transport dimensions (LxWxH): 9,6x3x3,6 Production country: KR Additional information Please contact Jeroen Heindryckx, Bart Apers or Matthias Eyckmans for more information

Condition: good (used), mileage: 722,599 km, power: 345 kW (469.07 HP), first registration: 03/2018, fuel type: diesel, color: other, axle configuration: 4x2, tire size: 315/70R22,5, fuel: diesel, wheelbase: 3,800 mm, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: steel-air, Year of construction: 2018, Equipment: ABS, air conditioning, cruise control, parking heater, sleeping cabin, traction control, = Additional Options and Accessories = - Digital Tachograph - Tachograph (Control Unit) - Fixed - Globetrotter - Alloy Wheels - Parking Air Conditioner = Remarks = Number of axles: 2, Configuration: 4x2, Tare weight: 7254 kg, Gross weight: 19200 kg, Total fuel capacity: 520 liters, Fifth wheel height: 118 cm, Fifth wheel: Fixed, Number of locks: 1, Alloy Wheels, Suspension type: Air suspension, Cabin type: Globetrotter, Cruise control, Tachograph (Control Unit), Digital Tachograph, Air conditioning, Parking air conditioner, Parking heater, Color: Multicolored, Engine manufacturer: Volvo, Engine power: 345 kW (463 Hp), Euro: 6, Transmission type: I-Shift, Gears: 12, Power steering, ABS, ASR = Additional Information = Drivetrain Engine Brand: VOL Transmission Transmission: 12-speed, automatic Axle Configuration Tire Size: 315/70R22.5 Brakes: Disc brakes Axle 1: Steered; Left tire profile: 11 mm; Right tire profile: 12 mm; Suspension: Leaf spring Axle 2: Dual tires; Left tire profile: 11 mm; Left tire profile: 13 mm; Right tire profile: 11 mm; Right tire profile: 12 mm; Suspension: Air suspension Dimensions Dimensions (L x W x H): 596 x 255 x 367 cm Weight Curb weight: 7,254 kg Payload: 11,946 kg GVW: 19,200 kg Condition Technical condition: Good Visual condition: Good Damage: None Number of keys: 3 Identification License plate: KLEYN1 = Company information = Kleyn Trucks is one of the world's largest independent used vehicle dealers. Here you can choose from a constantly changing inventory of 1,200 used trucks, tractors, and trailers. Our selection includes all European brands, model years, and price ranges. Why buy from Kleyn Trucks? Simple! • Large, rapidly changing market • Recognizable quality • A good price • Competent sales team • We speak many languages • We understand our customers • Import and transport support • (Export) license plates are quickly arranged • Expert technical services • The security of "recognizable quality" • And more... Please visit our website for special offers and a complete inventory: Leasing through Kleyn Trucks is possible in most European countries! Delqysvyyqdjhykjcg Quickly calculate your leasing rate and submit an inquiry via our website. Inquire directly about our European warranty package.

Condition: used, Year of construction: 2006, operating hours: 286 h, 2006 | Holland-Lift | Holland-Lift N195-12EL Combistar (19.5 m) | Used Scissor Lift | 286 hours 📍Location: Lithuania, Domeikava 🚛 We Deliver to your destination – Estimate the shipping cost with our calculator! 💰 Buy Now for EUR 10000 or Make an Offer. Request payment at delivery for an affordable fee! (subject to approval)* 👷‍♂️ Inspected by an independent expert 31 inspection points 27 approved ✅ 4 imperfect ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: Given the age of the machine, all components and functions are operating as expected, with no major issues or abnormalities observed during the inspection. ❓Want the Full Inspection Report, Extra Photos & a Video? 🔍 Search this on Google for full details!: "38106 Equippo" 💡 Why Buy from Us? ✔ Fully inspected machines ✔ Delivered to your jobsite ✔ Money-Back Guaranteed ✔ Safe payment methods with possibility to pay at delivery ❓Got machines to sell? Contact us for a free evaluation Delqyswg Spdshykecg

Condition: good (used), power: 260 kW (353.50 HP), fuel type: diesel, color: orange, Year of construction: 2011, operating hours: 12,878 h, Equipment: air conditioning, General information Field of application: Construction Serial number: HCM1J200C00020679 Technical information Track width: 60 cm Make of engine: Isuzu Condition Technical condition: good Visual appearance: good Dslqowdw Ndsyhykocg Other information Emission level: Stage IIIA / Tier III Delivery terms: EXW Production country: JP Additional information Please contact Dennis van Loon, Antoon Schroder or Jeroen Rijk for more information

Condition: used, Year of construction: 2015, Cutting length: 3.800 mm Width of lifting table: 2.200 mm Number of grippers: 9 Feedrate max: 140 m/min Continuously variable feed: Yes Saw blade projection: 95 mm Main motor power: 15 kW Scoring saw: Motoric adjustment SELCO DigiSet: Yes Labelling: manually Lift table: Yes For sensible workpieces: Clamping pressure adjustable Stop side: Left Optimization: Yes SELCO OPTIPLANNING PROFESSIONAL: Yes Dcjlqyewgl Iyshykjg SELCO Quick Change: Yes Head aligner: Yes Side alignment: Yes Control: BIESSE OSI PLUS

Condition: good (used), Nagel Citoborma 480AB Paper Drill Device in very good condition. Four drilling heads. Dolqyhyjwh Nqhskjcg Technical data: Drill distance: 45-285 mm Drill diameter: 2-20 mm Stack height: 60 mm Weight: 275 kg Automatic drilling cycle, controlled by a foot pedal. Solid construction on a pedestal. Drill table adjustable in every plane. This is one of the latest Citoborma models. The set includes operating tools, instructions, new stick + drills.

Condition: good (used), Year of construction: 2016, Field of application: Construction Empty weight: 875 kg Technical condition: good Visual appearance: good Fits to following machines: Coupler for Volvo EC460/480 Bucket type: Excavator bucket Delivery terms: EXW Djlqyhyswdw Igokocg Production country: GI Please contact Dennis van Loon, Antoon Schroder or Jeroen Rijk for more information

Condition: good (used), Nagel Citoborma 290B Paper Drill Dcslowhaxpsqyhykog The device is 100% functional. Very good condition, practically a new machine. Solid construction – weight 70kg. This is the currently produced model of the Citoborma drill. 380V power supply. Two drilling heads with adjustable spacing in the range of 45-170mm Drill diameter 2-20 mm. Stack height 60 mm. Controlled by a hand lever. Waste directed to the external sleeve. The drill table is adjustable in every plane (sides, front/back), has limiters for setting the drilling spacing (non-standard drilling), additionally a special module for standard spacing is installed in the table. What’s more, the table has two movable margins. The drill has an automatically released table lock after each cycle. Which allows you to move the table to the next position. The set includes drills, tools, and instructions.