Used Gesan Dv 150 for sale (29,762)

Condition: used, Heraeus Vötsch Type: HCV 4033-5/S Temperature chamber water-cooled (converted to refrigerant R-452A) Characteristics for temperature tests Temperature range -40 °C to +150 °C Temperature fluctuations over time with still air ±1.0 K Distance from the wall of the measuring points 100 mm Temperature change rate (average) with test object, measured in the air supply Heating: 7 K/min in the range -40 °C to +150 °C Cooling: approx. 5 K/min in the range +150 °C to -30 °C Heat compensation max. 3000 watts Test object approx. 20 kg Characteristics for humidity tests Fgslinsvrd Iqenbleb Temperature range +10 °C to +90 °C Temperature fluctuations over time ±0.5 K Dew point range +5 °C to +89 °C Humidity range 10% to 95% r.h. Temporal humidity fluctuations +1 to ±3% r.h. The values are measured at an ambient temperature of +25 °C. Installation and operating data: Dimensions of test room (WxDxH) 675 x 650 x765 mm Housing dimensions (WxDxH) 930 x 2100 x 1900 mm All information is average values at an ambient temperature of +25°C, and nominal voltage of 400 V, 3/N, 50 Hz, without test object, radiation and optional accessories Nominal voltage: 400 V +6/-10% v3/N 50 Hz Nominal power 13 kW Nominal current 16 Α Plug Cekon 32 Α On-site fuse 32 A, slow-blow Refrigerant R-452A Weight approx. 950 kg For your safety as a buyer, the following information! The following points are carried out in advance on the chambers we offer: 1. Functional check and replacement of necessary components 2. If necessary, new filling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data, information is subject to change!) We are happy to answer any further questions you may have over the phone.

Condition: good (used), Pull cylinders, hydraulic cylinders, support cylinders, hydraulic rams, pressure rams, multi-purpose cylinders -Manufacturer: Enerpac, Hydraulic Cylinder Double Acting Pressure Force 9 Ton Fslinnovq Ii Noblogb -Type: BRD96 -Stroke: 150 mm -Piston rod: Ø 25.4 mm / M22 x 1.5 -Dimensions: 350/63.5/H100 mm -Weight: 6.8 kg.

Condition: new, Year of construction: 2025, table area: 2000 x 1000daylight: 700 (Abstand zwiwschen Tisch & Kolbenspitze)table height: 800Cylinder: 240motor: 7,5performance of pump: 22Forward speed: 9Return speed: 13tank capacity: 70 Capacity: 150 tons – 340 Bar / 172 tons – 380 Bar Motor Control: via Hand Lever Cylinder: Manually movable from the side Bridge: Movable via Hand Wheel Table Dimensions: 2000 x 1000 mm Installation Height: 700 mm (distance between table & piston tip) Piston Stroke: 400 mm Table Height: 800 mm Felinnbehu H Dpjlogb Cylinder: Ø 240 mm Motor: 7.5 kW Pump: 22 Lt./min – ASC Speed: Forward: 9 mm/sec – Return: 13 mm/sec Tank Volume: 70 Lt Pressure Regulator Valve Pressure Gauge Display Pressure Hold Valve Weight: 2300 kg

Condition: new, Year of construction: 2025, Decoiler RAZ-DV 1250/2 Fslinnbsv I Ur Eoljgb - up to 2,0 t stationary - with 4 clamping arms, ball bearings and with disc brakes - ecordable coil width: 1250 mm - Upper loading capacity: 2.000 kg - Downer loading capacity: 2.000kg

Condition: new, Siemens 6FC9320-2BC Resolver measuring gear DM 2 / 150 i = 1 : 5 < unused > 100 % functional Fgelinnbsi Ed Hkolsb

Condition: excellent (used), Shredding of tires, cables, wood, metal Folinnbjv Htr Usljgb

Condition: used, Year of construction: 2011, operating hours: 7,751 h, fuel type: diesel, motor manufacturer: Volvo, Field of application: Construction Folinnbougq Tkslegb Empty weight: 2.532 kg Generator capacity: 150 kVA Please contact Sales Department for more information

Condition: good (used), Year of construction: 1999, operating hours: 37,400 h, clamping force: 500 kN, screw diameter: 30 mm, displacement volume: 78 cm³, injection pressure: 2.2 bar, overall weight: 2,350 kg, This ARBURG injection moulding machine is in machine storage at Plastima Used Machinery. The injection moulding machine is from 1999 and is in good condition. - Make: ARBURG GmbH + Co. KG - Model: 320 S 500-150/60 Fgelinnberg Hcyoleb - Year of construction: 1999 - Clamping force: 500 kN - Screw diameter: 30 mm - Injection pressure: 2,200 Bar - Shot volume: 78 cm³ - Working hours: 37,400

Condition: new, weight approx.: 1.400motor power: 5,5oil filling: 34performance of pump: 20messurements (LxWxH): 2.000 x 950 x 2.550pressure: 150stroke: 400column width: 1250 Workshop press: - Motor & Hand Control - Laterally sliding cylinder - Pump Hema of the Caproni - Manometer - Operating instructions - CE Made in Turkey Option:  Felinnslzm E Hjblogb Stand width: 1400 (EURO 722 surcharge)

Condition: new, Year of construction: 2025, Decoiler RAZ-DV 1250/4 - up to 4,0 t stationary - with 5 clamping arms, ball bearings and with disc brakes - ecordable coil width: 1250 mm - Upper loading capacity: 3.000 kg - Downer loading capacity: 4.000kg Fslinnjv I Um Nsbljgb

Condition: new, Festo SLT-25-150-A-CC-B Mini slide Mat.-No.: 197916 Series D802 with small parts kit 395853 unused, in opened original box, 100% functional Fgslinei D U Nrsnbleb

Condition: excellent (used), Year of construction: 2004, clamping force: 1,000 kN, Arburg 420C-1000-60-150 ( 123) 2-component with robot and cage Year of production: 2004 TECHNICAL DATA Screw Dia [mm]: 18/30 Shot Weight [g]: 17/65 Injection Pressure [bar]: 2500/2210 Clamping Force [kN]: 1000 Tie Bar Distance [mm]: 420x420 Platen Size [mm]: 570x570 Mould Height min. [mm]: 250 CONTROL Type of Controls: Selogica Monitor: Yes Control Cabinet: Yes Language: German Folinovt Rwuonblegb OTHER Power [kW]: 34,5 Workinghours [h]: 61792 Dimensions [m]: 4,6x1,8 Weight [kg]: 4000 CR - CORE PULL R - ROBOT ZP - AIR VALVE without hopper

Condition: used, color: other, Year of construction: 1995, Serial number: 12 TONS Folijua Ddcennblegb We have a stock of >100 axles. Please contact us if you can't find what you are looking for.

Condition: new, Year of construction: 2025, Functionality: fully functional, total width: 2,000 mm, total height: 2,200 mm, total length: 3,550 mm, height adjustment type: electric, table height adjustment: 500 mm, workpiece weight (max.): 80 kg, grinding belt length: 7,000 mm, grinding length: 1,500 mm, grinding belt width: 150 mm, overall weight: 870 kg, extraction connection diameter: 180 mm, space requirement height: 2,200 mm, space requirement length: 3,550 mm, space requirement width: 2,000 mm, type of input current: three-phase, input frequency: 50 Hz, power: 5.5 kW (7.48 HP), input voltage: 400 V, grinding width: 950 mm, motor speed: 1,435 rpm, Equipment: documentation/manual, Long-belt sanding machine MS92-150 3-cornered sanding belt 150x7100 for manual sanding, matting and polishing. For processing steel, stainless steel and brass. The scope of delivery includes - Machine stand with connecting elements - Infinitely variable belt drive - Pneumatic belt tensioning and manual belt tracking regulation - Sanding unit with contact roller - Electric table lift - Flat machine table - Workpiece stop ruler on the machine table - Original equipment sanding belt Fgjlinstwb U Aonblsb - Operating instructions + manufacturer's declaration - CE version The stable machine frame in welded steel construction results in very smooth machine operation. The two machine stands are equipped with an offset so that longer parts than the machine table can be sanded. The sanding belt guide via 3 belt deflection rollers results in the largest possible open working area for the operator and therefore good working conditions, especially with hand sanding blocks. The belt is driven by a three-phase motor with a balanced belt drive roller. The belt has adjustable pneumatic belt tension. The dust collection device is dimensioned so that the sanding dust is collected and directed to the extraction nozzle when connected to an appropriate extraction system. The sanding unit is mounted on backlash-free roller guides to ensure effortless operation. The machine table can be easily and quickly adjusted to the correct workpiece height using the electromotive table lift. The table lift guide elements are maintenance-free. For loading, the table can be extended so far that workpieces do not have to be pushed under the sanding belt when loading. The electrical controls for the main functions are arranged in the middle of the machine for ease of use. Machine color: RAL 9001 cream white and RAL 5003 sapphire blue Switch cabinets and small housing in " light gray " The machine is supplied as standard with an original equipment belt (W x L) 150 x 7100 mm and a contact roller approx. 50° Shore for 150 mm belt width. Additional accessories: 3-axis table with integrated handling device for turning and swiveling the workpieces. The handling device is mounted in the center of the table under the insertion frame. To work with the handling device, the insertion frame is removed from the machine table. The handling device is equipped with four vacuum suction cups to hold the workpieces and consists of: The bearing with the rotary axis, on which a brake disk is mounted at the rear. The swivel device is attached to the front of the rotary axis. This can be locked at 0°, 22.5°, 45°, 67.5° and 90°. An additional locking disk is attached to the swivel head, which is used for fine adjustment of the workpieces to the sanding belt. The rotary and swivel axes are unlocked pneumatically using a foot switch, while the rotary axes are moved manually. Workpiece weight when used as a flat table with the insert frame in place = 80 daN Workpiece weight when using the handling device in relation to the clamping plate = 25 daN or 120 Nm in relation to the center of the rotary axis.

Condition: used, mileage: 176,926 km, Year of construction: 2020, 3250 wheelbase van, Automatic transmission, Climate, Km 176,926 Fgjlinnov Iawyebleb

Year of construction: 1977, Condition: used, turning diameter 700-1500 mm clamping length 3000 mm guage width 1676 mm Control weight of the machine ca. 60 t Rafamet UBC 150 wheelset lathe for railway wheelsets Serial No.: 152 110 Year of manufacture: 1977 Machining range: Diameter from 700 mm to 1500 mm Gauge of the wheelsets to be machined in standard version: 1435mm track widths: 1435mm , 1524mm , 1676mm Length of wheelsets to be machined: 1640-3000mm Running diameter of the wheelset: 700-1500mm Driving diameter: 350-1350mm Width of the wheelset tyre: up to 140mm Fork dimensions of the wheelset lathe_ 8700x360x3250mm Total installed power: 172kW Weight of the machine: 59200kg Fgjlineuddgljnblsb Speed of the setting movement Lifting and centring device: 2500 mm/min. Headstocks: 1320 mm/min. Quills: 550mm/min. Supports in the longitudinal direction: 1300 mm/min.

Condition: used, Tumbler Manufacturer: Dorit Folinnovyrwioblegb Model: VV-1-150 Vario Vac Stainless steel construction Tiltable drum with one-point support on a solid frame, moves on 2 rustproof fixed wheels and 2 swivel wheels with brakes Very easy to operate, clean and service Volume: 200 liters 2 speeds Electric power: 0.25 / 0.37 kW Voltage: 400V 50Hz Dimensions: 700x1200x1500mm Weight: 200 kg

Condition: excellent (used), Year of construction: 2004, Engel Victory 750/150 Tech (146) without hopper Product Code: 146 Availability: In Stock Year of production: 2004 Brand: Engel Technical data Shot Weight: 354 g Clamping Force: 1,500 kN Screw dia: 50 mm Injection pressure: 1427(1909) bar Tie bar distance: Tie-bar less Platen size: 750 x 850 mm Type of controls: CC200 Language: German Power: 61 kW Workinghours: 98108 h Fjlinsvtzf Asnblogb Weight: 9500 kg Dimensions: 5,7 x 2 m Hopper: No Core pull: Yes Euromap: Yes

Condition: ready for operation (used), Functionality: fully functional, machine/vehicle number: 181199, Machine no.: 181199 Manufacturer: AGTOS Type: Barrel blasting machine Designation: TS 150-3.6-01-15,0 Turbines: 1 turbine with 15.0 kW Extraction air volume: 3000 m³/h Max. batch weight: approx. 1000 kg Type: Sinter-plate filter Other details Characteristics of the installed filter system Residual dust content: ≤ 1 mg/Nm³ Characteristics of the blasting system Blasting media (material and size): Wire grain Blasting media quantity (initial filling): approx. 1000 kg Workpiece temperature: max. 80°C Drum length: 900 mm Drum diameter: 800 mm Max. Drum load: 250 kg Max. Single piece weight: 5 kg Capacity: 150 liters Fgslisrq Hmzennbleb Max. Feeder lifting capacity: 480 kg Sound pressure level without sound insulation: ≤ 85 dB(A)

Condition: good (used), Vice, bench vice, metalworker's vice, parallel vice, heavy-duty vice -Parallel vice: jaw width 150 x 30 mm -Wingspan: 235 mm -Dimensions: 490/220/H195 mm Fjlijvm U Htennblogb -Weight: 26 kg

Condition: used, 2 light castors adjustable in distance: 1300 - 2000 mm roller width: 250 mm Fgolinnjc N Rlkeblob Rollers-Ø: 50 mm Support height adjustable: 1000 - 1200 mm Weight: 20 kg

Condition: as good as new (ex-display), PRICE ON REQUEST! - as good as new - completely measured - gear backlash axle 4 - 0,01 WM Fgjlinnjg A Iucebleb axis 5 - 0,015 WM axle 6 - 0,01 WM - Central hand readjusted - Endurance test 8 hours at 100 % load - Delivery in a special box (insured shipping) - Central hand in exchange (without exchange on request) - Gearbox overhaul of axles 1-6 - 12 months warranty 18 months possible for extra charge IMMEDIATELY more than 100 central hands in stock, different models. Just ask! Also an express overhaul of your KUKA central hand possible - from delivery 48 - 72 hours. In addition, we also offer the repair of ABB wrists.

Year of construction: 1993, Condition: used, machine/vehicle number: 0356-12T-037-345, Cooling air volume: 250 m³/h Heat output: 965 W Compressed air inlet temperature: + 35°. Compressed air outlet temperature: + 27°. Volume flow: 75 m³/h Operating pressure: 7 bar max. operating overpressure: 15 bar Compressed air connection: R 3/4 Condensate separator, capacity: 0.5 l condensate quantity at nominal load: 316 g/h electrical connection: 220 V weight: 105 kg Space requirement: 870 x 560 x 620 mm Fgslinednzp Ienblsb

Condition: ready for operation (used), Primary voltage: 3 x 400 V Primary current: 10.1 A Fgjlinsd Atrdjnbleb Secondary voltage: 3 x 113 V Secondary current: 36 A Secondary voltage: 220 V Secondary current: 0.91 A Duty cycle: 100% Primary voltage: 7000 VA Frequency: 50/60 Hz Space requirement: 330 x 160 x 190 mm Weight: 51 kg

Year of construction: 1991, Condition: used, machine/vehicle number: K2940, pression: 150 t working width: 4300 mm clear support width: 3600 mm Folio Dnf Usnnblsgb support throat: 300 mm max. assembly height: ca. 500/700 mm working speed: auf-/abwaerts 41 - 65/10 mm/sec rear stop: 1000 mm electrical connection: 400 V, ca. 15 kVA kW weight: 14 t space needed: 4600 x 1950 x 3100 mm