Used Gesan Dvs 150 for sale (19,855)

Condition: used, Year of construction: 2023, operating hours: 50 h, axle configuration: 4x4, fuel type: electric, Equipment: all wheel drive, Field of application: Construction Do Ia Unxou Rlmveijcg Drive: Wheel Mast: articulated arm Rental currency: EUR Please contact Jan De Lepeleer for more information

Year of construction: 2020, operating hours: 0 h, Condition: as good as new (ex-display), High-pressure cleaning device, high-pressure flushing device, high-pressure built-in flushing device on hot-dip galvanized and painted high-quality steel frame with fork-lift truck lugs suitable for installation in company vehicles. PTC Salmon similar but no Feierabend & Fock, Karo, Leistikow, Müller, Rioned, Rockstroh, Rom, Rowo,... The following models are available: Salmon 60/200 | 60l/min. at 200bar | Engine: Vanguard 35 HP 26kW Salmon 75/150 | 75l/min. at 150bar | Motor: Vanguard 35 HP 26kW Salmon 30/300 | 30l/min. at 300bar | Motor: Vanguard 35 HP 26kW Salmon 45/240 | 60l/min. at 200bar | Motor: Vanguard 35 HP 26kW DIMENSIONS / WEIGHT: Dimensions without water tank LxWxH: approx. 760x1.250x1.200 mm. Dimensions with 400l water tank LxWxH: approx. 1.220x1.250x1.200 mm Dimensions with 800l water tank LxWxH: approx. 1.670x1.250x1.200 mm Empty weight without water tank: approx. 300 kg Empty weight with 400l water tank: approx. 320 kg Empty weight with 800l water tank: approx. 350 kg HIGH PRESSURE PUMP: Manufacturer: HPP Model: CLW Flow rate: max. 60 or 75 l/min. Working pressure: max. 200 or 150 bar MOTOR: Manufacturer: Vanguard Model: 35 HP Fuel: Petrol Max power: 35 HP (26 kW) CONTROL PANEL: Start button Hour meter Dce Ia Usf Arugjnxijg Electronic fuel gauge LED indicator for oil temperature LED indicator for low lubrication oil pressure LED indicator for clogged air filter LED-indicator for speed measurement LED-indicator for generator LED indicator for spark plugs Emergency stop button ELECTRICAL CONTROL [...]

Year of construction: 2022, Condition: new, Niro-tech RX-150 single shaft paddle mixer Dcj Ia Unxshqnppeiog This RX-150 is made of stainless steel. The machine allows mixing in both directions. It is equipped with a single mixing shaft and moisture proof button control panel. Motor power 1.5 kW provides 5-48 rot. /min. The tank capacity is 150 liters, which allows filling it with 110 kg of meat. Unloading provided by tilting the drum to about 96 degrees. The mixer adapted to unloading directly to the standard buggies of 200 liters capacity. The dimensions of the machine: 1300 x 700 x 1600 (all in mm)

Condition: as good as new (ex-display), Year of construction: 2018, Functionality: fully functional, TECHNICAL FEATURES Cleaning working width mm 1000 Vacuum working width mm 1300 Area performance/hour (theoretical - practical) m²/h 6,000 - 3,600 Battery supply 36V Absorbed power W 2650 Traction feed IP code IPX3 BATTERIES Type Gel battery pack (6 pcs.) 6 V 240 Ah () Battery life h - min 5 h Battery compartment dimensions x number mm x Qty 540x295x380 X 2 BRUSHES Pad diameter x number mm - inch x Qty 508 - 20” x 2 Motor power x number W x Qty 500 x 2 Motor speed rpm 135 Head weight - specific pressure Kg - g/cm² 65;79;101 - 24;29;37 TRACTION Engine power W 900 Maximum forward speed Km/h 6 Climbing performance at full load % 2 Climbing performance when empty % 16 SUCTION Engine power W 600 Vacuum pressure (water column) mbar - mmH2O 165 - 1,700 Air flow rate l/s 32 Noise level dB(A) 67/59 (*) TANK Dco Iovnmipsa Unxisg Type Double tank Cleaning solution capacity l 150 Waste water tank capacity l 160 Weight (without/with batteries) Kg 296/584 Dimensions mm 1850x1100x1380

Condition: as good as new (ex-display), Year of construction: 2024, Functionality: fully functional, repeat accuracy: 0.02 mm, travel distance Z-axis: 200 mm, positioning accuracy: 0.07 mm, type of input current: three-phase, input voltage: 380 V, table length: 3,000 mm, table width: 2,000 mm, warranty duration: 12 months, travel speed (max.): 10,000 mm/min, Equipment: safety light barrier, The Mach 150 waterjet system is a powerful and cost-effective system for precise 2D cutting applications. Equipped with advanced waterjet technology and robust components, this ready-to-use waterjet solution offers excellent performance. The machine features high-quality motors, drives and software that are also used in Flow's top products. Ds Isvnfc Isa Unxijcg The Mach 150 is both cost-effective and reliable. With our excellent service and maintenance offer, you can rely on the sustainability and efficiency of the Mach 150. You are investing in Flow's reliability and many years of experience. The following features characterize the system: ◼ Inclined bridge for full access to the work area and user-friendliness ◼ Proven machine controls with sensors and system health diagnostics ◼ Powerful PC for industrial use ◼ Various configurations for all industry requirements ◼ Powerful, industry-leading software ◼ A complete, ready-to-use system ensures that your production can start immediately.

Condition: new, stroke lenght (max.): max. 400table height: Fußboden bis Tischplatte Oberkante 850daylight: 600speed: Vorlauf 120 mm , Druck 13 - 4 mm, Rücklauf 170/mm/formance of pump: 65 Lt./min (REXROTH - Axialkolbenpumpe)motor: 15 kw - 1500d / minmessurements (LxWxH): 2.100 x 2.400 x 4.300weight approx.: 11.000 Capacity: 1500kN. (150 ton - at 245 BAR) Operating selection: Via key switch Manual / set-up via two-hand operation without light sensor fuse on front side (rear side always active) Dcj Ia Unjmpfwdjxisg Automatic via two-hand operation at full speed (with active light sensor fuse) Main cylinder: Ø 270mm. Auxiliary cylinder: 2 pcs. Ø 70 x 50mm. Motor: 15kw. - 1500d/min. (IE-3) Pump: 45cc. - 65Lt./min.   REXROTH - axial piston pump Speed: flow 120mm. - Pressure: 13 - 4mm. - Return 170mm./sec. Clearance: 1300mm. Table top: 1200 x 800 x 90mm. - with T - grooves ram plate: 1200 x 800 x 600mm. - with T - grooves & ribbing Installation height: 600mm. (max. distance between table & ram plate) Stroke length: max. 400mm. Table height: 850mm. (Floor to table top upper edge) ----- Hydraulics: (Hydraulic accessories on top of the press) Kontrol Block & Valves (REXROTH Proportional Valves) Prefill valve (NG.125) 8 way guide Hydraulic ram safety device Mechanical ram safety device for TDC position Pressure adjustment via PLC. Speed adjustment via PLC. Pressure stop valve for 600 sec. Air cooler Automatic lubrication for guides Auxiliary motor Auxiliary pump Control system: Main control box (mounted on the side of the press frame) Pivoting control panel SIEMENS S7 - 1200   KTP. 9 SIEMENS screen (language selection DE.- ENG.) Safety PLC. (SICK) Light sensor for front & back of work area (SICK 750 + 150mm.) Soft starter Two hand operation (Movable) SECOMEA Ethernet connection Ruler for setting the stroke length (450mm. - NOVOTECHNIK 16BIT) Workspace lighting (2-fold IP-66)   8 free ON & OFF outputs on the PLC. for external connections ----- Protective railing around the hydraulics Lateral ladder ----- Documentation: Operating manual DEUTSCH(1 fold paper & 1 fold USB.) Hydraulics & control diagrams Parts lists CE. Certificate Standard :EN.16092/1/3 ----- Total dimensions: approx. 2400 x 2100 x 4100mm Total weight: approx. 11.000kg. Painting: frame RAL 7035 light grey, railing & hydraulics RAL 7016 anthracite grey. -----

Condition: used, Year of construction: 2016, operating hours: 2,680 h, fuel type: electric, Field of application: Construction Empty weight: 6.700 kg Mast: articulated arm Working height: 1.500 cm Max. horizontal reach: 760 m Ds Ia Uouz N N Aenxiecg Rental currency: EUR Please contact Jan De Lepeleer for more information

Year of construction: 1999, Condition: excellent (used), injection molding machine krauss-maffai 150-700 c1 year 1999 Screw diameter 55 mm In top condition, still in operation Do Iaoh S Dncs Unxiscg

Condition: new, Year of construction: 2024, pressing force: 150 t, bending length: 3,100 mm, Hydraulic press brake TPM8 150 tons press force 3100 mm edge length Efficient servo motor The servo motor reduces energy consumption by around 40% compared to an AC motor. New machine generation 20% more efficient. Significantly reduced oil temperatures improve performance and extend the service life of the hydraulic system. Intuitive TJS control system Windows 10 Enterprise with 19″ LCD touchscreen, 1280 x 1024 resolution and multi-touch support. Digital/2D graphic contour programming technology with 3D view, automatic preparation of the bending process and bending simulation. Supports CAD file import (DXF), 3D file import (IGS), flexible automatic calculation of bending operations and collision detection for workpiece, tools and machine body. Integrated hydraulic system The electro-hydraulic system controls two cylinders for high, synchronized accuracy during bending and repositioning. Dj Iaevahr Ae Unxiocg The integrated hydraulic control system minimizes oil consumption and improves machine stability. Hydraulic crowning The hydraulic automatic crowning system ensures a uniform and precise bending result, even for very long workpieces. The control system automatically regulates the necessary compensation to ensure precise and comfortable operation. Flexible back gauge system High speed and high positioning accuracy. The multifunctional backgauge system ranges from a standard single-axis configuration to a 4-axis configuration.

Condition: used, Kuka KR 150 Robot ZH 150/180 L 00-106-446 Industrial robot Ds Ia Uovgwbtonxijcg

Condition: used, Year of construction: 2017, fuel type: electric, color: red, General information Field of application: Construction Weights Empty weight: 6.700 kg Functional Mast: articulated arm Lifting capacity: 200 kg Working height: 1.500 cm Dcs Ia Uet Svw Honxiog Condition General condition: good Technical condition: good Visual appearance: good Other information EPA Marked: yes Front tyres / undercarriage remaining: 75 Rear tyres remaining : 75 Max. horizontal reach: 760 m Transport dimensions (LxWxH): 6.05 x 1.5 x 1.97 Additional information Please contact Sales Department Collé Sittard for more information

Condition: new, die cushion press capacity: 30die cushion returning speed: 52die cushion stroke: 200daylight: 750pressure: 150stroke: 500 Dj Ia Unxjd Ab Iljijcg

Condition: new, width of the strips 150 mm band length 1220 mm dimensions of grinding wheel 225 mm work table: 150 x 400 mm Table tiltable up to 90 Grad table surface area 150 x 130 mm connected load frequency 230 V total power requirement 0,75 kW weight of the machine ca. 35 Kg Ds Isfhk T Hja Unxiocg dimensions of the machine ca. 650 x 360 x 400 mm

Condition: used, Year of construction: 1996, Kaeser noise protection hood built in 1996 for an EPC 630-150 From stock sale Dj Ia Uovkf Dksnxiocg We are on vacation until 06.01. Your request will be processed afterwards. Warranty and returns are excluded from this advertisement.

Condition: new, Year of construction: 2025, NEW MACHINE Dj Ia Uerwx H Senxijcg please ask for daily updated price! We will make you an individual offer!

Condition: used, Kuka robot KR 150 L130 KR C2 industrial robot KR150L130 Robot Without cable Without panel Dcs Iasvgwavj Unxiog

Year of construction: 1980, operating hours: 30,000 h, Condition: refurbished (used), Functionality: fully functional, machine/vehicle number: 04430, Fully automatic machine with - Automatic feed and removal handling - Control of steam and cooling water supply - Cold water pump to increase the cooling capacity - Set of new tools (designed for the production of 180g 12" records) - Plasticizing unit with suction for vinyl granulate De Ia Unxjuauvveijcg

Condition: new, More technical data on request Dcs Ia Unod Ab Igexieg ht curtain manual and automatic working manual stroke adjustment by camshaft switch maintenance free self lubricating 4-fold ram guiding polster plate with T-slots according to CE rules press force:150 tohydraulic pressure:254 bartable:1200 x 750 mmram dimension:950 x 650 mmhole in table:120 mmstroke:300 mmdistance ram-table:550 mmrapid speed:100 mm/sworking speed:5,5 mm/sreturn speed:165 mmmotor:11 kWlength:2.225 mmwidth:1.600 mmheigth:3.650 mmweight:8.200 kg

Condition: new, range L-W-H 1700 x 485 x 950 mm weight 116 kg 6 St. weight kg weight max. in kg kg Internal dimensions of the top drawer 1390 x 360 x 60 mm. Internal dimensions of the right second la 910 x 380 x 90 cm. Internal dimensions of the left 2nd, 3rd and 4th la 440 x 380 x 90 mm. Internal dimensions of the left fifth la 440 x 380 x 210 mm. Internal dimensions of the shelf behind the doors 940 x 450 x 390 mm. Wheel dimensions 150 x 40 mm. The thickness of the solid wood panel 40 mm. Packaging dimensions 153 x 49 x 96 cm. Weight 116kg. Dcs Iou Imfuea Unxiog

Condition: new, Year of construction: 2025, NEW MACHINE Dce Ia Usrwx Itonxisg please ask for daily updated price! We will make you an individual offer!

Condition: used, Kuka robot KR 150 KR C2 Dcs Isvgwapsa Unxieg Industrial robot KR150 Robot Without cable Without panel

Condition: new, pressure: 150Tappet adjustment: (automatische Verstellung) 40stroke lenght (max.): 10-125total power requirements: 15weight approx.: 9500messurements (LxWxH): 1800 x 1500 x 2600Stroke/min: 50-90 Dj Ia Unxetqwtdsiecg

Condition: new, width of the strips 150 mm band length 2000 mm band speed 33 m/sec Dcs Ioupxl Iea Unxisg total power requirement 4 kW weight of the machine ca. 100 t dimensions of the machine ca. 1,2 x 0,5 x 0,85 m Belt sander with - Contact disc: 600 x 150 mm

Condition: new, pressure 1,5 kN stroke 40 mm throat 70 mm Working height from to 75 - 170 mm table surface area 115 x 70 mm Ds Ia Unefv Av Doxiocg weight of the machine ca. 11 Kg dimensions 115 x 175 x 290 mm Hand presses with rack HZ 150 The power is transmitted via a rack and pinion construction. she finds their use where during the working process a constant pressure is needed. Precisely manufactured, spindle hardened and ground, unlimited service life Long spindle guide, optimal pressure performance, T-slot according to DIN 650 milled in the middle, sliding blocks fit exactly.

Condition: new, width of the strips 150 mm band length 2000 mm band speed 30 - 34 m/sec total power requirement 4 kW weight of the machine ca. 100 Kg dimensions of the machine ca. 1,2 x 0,5 x 0,85 m De Iajirwwpo Unxiecg