Used Aksa Apd 110Pe for sale (71)

Condition: new, Year of construction: 2023, functionality: fully functional, overall weight: 1,470 kg, fuel type: diesel, tank capacity: 230 l, color: beige, power: 27.21 kW (37.00 HP), output current: 47 A, output voltage: 400 V, output frequency: 50 Hz, type of output current: three-phase, nominal power: 17 kW (23.11 HP), nominal power (apparent): 22 kVA, continuous power: 20 kW (27.19 HP), continuous power (apparent): 20 kVA, total length: 2,800 mm, total width: 1,063 mm, total height: 1,703 mm, rotational speed (max.): 1,500 rpm, motor manufacturer: Cummins, type of cooling: water, AVS Diesel Generator DW 20 CU 15 AK14A PRP Power: 16 kW / 20 kVA ESP Power: 17.6 kW / 22 kVA Engine: Cummins 4B3.9G11 Emission Stage: - Speed: 1,500 rpm Mechanical speed governor Operating voltage: 12 V Cooling: water-cooled Generator: Stamford PI114D Codpfxewu D Une Afyogp Voltage: 400/231 V Control panel: InteliLite AMF Type: canopy set; weather-protected, sound-insulated • Emergency stop switch • Radiator with mechanical fan • Base frame design with integrated fuel tank (230 L) and forklift pockets • Voltage and frequency regulation according to ISO 8528-5 • Unit intended for stationary use only Please note that these units are not approved for mobile use in accordance with the applicable EU regulation. The units are sold as B-grade goods. B-grade means that the units may show cosmetic imperfections such as surface rust or rust on the enclosure. These defects do not affect the function or performance of the units in any way. By accepting this offer, you explicitly acknowledge the described properties of the units and their stated condition.

Condition: good (used), Manufacturer: APD Cedpfx Afocwrn Ejyogp Type: 12 SC Delivery capacity: 3600 l/s Max vacuum: 5x10-6 Torr Ideal for high vacuum

Condition: new, Year of construction: 2024, functionality: fully functional, overall weight: 565 kg, fuel type: diesel, tank capacity: 38 l, color: beige, power: 12.06 kW (16.40 HP), output current: 21 A, output voltage: 400 V, output frequency: 50 Hz, type of output current: three-phase, nominal power: 11.6 kW (15.77 HP), nominal power (apparent): 15 kVA, continuous power: 10.4 kW (14.14 HP), continuous power (apparent): 13 kVA, total length: 1,850 mm, total width: 850 mm, total height: 900 mm, rotational speed (max.): 1,500 rpm, motor manufacturer: Perkins, type of cooling: water, AKSA AP 15 Perkins PRP output: 10.4 kW / 13 kVA ESP output: 11.6 kW / 14.5 kVA Engine: Perkins 403A-15G1 Emission level: Stage 2 Speed: 1,500 rpm Mechanical governor Operating voltage: 12 V Cooling: water-cooled Generator: Stamford or equivalent Voltage: 400/231 V Voltage regulator: AS540 Control panel: DSE 6120 – emergency automatic start Battery charger: 5 ampere Type: Canopy unit; weatherproof, soundproofed Emergency stop switch Radiator with mechanical fan Base frame construction with integrated fuel tank (38 L) and vibration dampers Coolant preheating Cgsdpfx Aewu Dbuefyep Voltage and frequency regulation according to ISO 8528-5 Unit suitable for stationary use only Please note that, in accordance with the applicable EU regulation, these units are not approved for mobile use. The units are sold as B-stock. B-stock means the units may show cosmetic defects such as minor rust, or rust on the housing. These defects do not affect the functionality or performance of the units in any way. By accepting this offer, you expressly acknowledge the described characteristics and the associated condition of the units.

Condition: new, Year of construction: 2023, functionality: fully functional, overall weight: 4,500 kg, fuel type: diesel, tank capacity: 700 l, color: beige, power: 322.15 kW (438.00 HP), output current: 591 A, output voltage: 400 V, output frequency: 50 Hz, type of output current: three-phase, nominal power: 328 kW (445.96 HP), nominal power (apparent): 410 kVA, continuous power: 269 kW (365.74 HP), continuous power (apparent): 370 kVA, total length: 4,463 mm, total width: 1,606 mm, total height: 2,500 mm, rotational speed (max.): 1,500 rpm, motor manufacturer: Doosan, type of cooling: water, AVS diesel generator DW 370 DO2 15 AK14A PRP power: 296 kW / 370 kVA ESP power: 328 kW / 410 kVA Engine: Doosan P158LE-1 Emission stage: 2 Speed: 1,500 rpm Cgodpfx Aswu Ectofysp electronic speed governor Operating voltage: 24 V Cooling: water-cooled Generator: Mecc Alte ECO 40 1S/4 Voltage: 400 V Voltage regulator: DSR1 Control panel: DSE 7320 Battery charger: 5 ampere Type: Canopied unit; weatherproof, soundproofed • Emergency stop switch • Radiator with mechanical fan • Base frame construction with integrated fuel tank (700 L) and vibration dampers • Voltage and frequency regulation according to ISO 8528-5 • Unit suitable for stationary operation only Please note that these units are not approved for mobile use in accordance with current EU regulations. The units are sold as B-grade goods. B-grade means the units may have visual imperfections such as flash rust or rust on the housing. These do not affect the functionality or performance of the units in any way. By accepting this offer, you expressly acknowledge the described characteristics and corresponding condition of the units.

Condition: refurbished (used), Force pressing cylinder: 2 x 1100 kN Capactiy cars: 30 -40 p/h Cgodpfx Aohgibhofyep Bale dimensions: 3,9 x 1,9 x 0,4 m x m Loading height: 1,32 m Cycle time: 60 s Power: 22 kW Weight: 22 t Dimensions: 7,5 x 2,8 x 3,0 Manual operation Mobile unit

Condition: used, Year of construction: 1998, total length: 3,350 mm, total width: 2,180 mm, total height: 2,780 mm, Weight: 9.000 kg Price: On request - Year: 1998 - Documentation available: Yes - CE marking present: Yes Codpfxeyrpvkj Afyogp - CE certificate present: No - Serial number: 230 - Drive system: Conventional - Power [kW]: 11.0 - Press force [ton]: 160 - Max. working width [mm]: 3100 - Column gap [mm]: 2550 - Tools included: Yes - Options: Digital readout - Transport dimensions: 3350mm x 2180mm x 2780mm (l x w x h) - Transport weight [kg]: 9000kg Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: good (used), Aksar AFM-BFM Rasgulla Gulabjamun making machine Cedpfx Ajtu N Alefysgp Rasgulla Gulabjamun making machine, ball forming machine is used for cutting and rounding various types of sweets and food products like rasgulla, gulabjamun, rasmalia, chumchum, peda, chocolate, coconut laddu, sweet balls, kachori, dates balls, riceball and various types of bakery, confectionery and indian snacks, 15L hopper, 10,000 pieces per hour, 1g to 100g, variable speed, mobile, 1Ph

Year of construction: 2016, condition: ready for operation (used), - USED - 4-AXIS SYNCHRONIZED CNC PRESS BRAKE AXIS: Y1 - Y2 - X - R BENDING LENGTH: 2100 mm TONNAGE: 60 ton Cgedpfxjxn U Rqo Afyop THROAT DEPTH: 410 mm DISTANCE BETWEEN UPRIGHTS: 1700 mm UPPER BEAM TRAVEL: 275 mm CONTROL UNIT: DELEM DA58 WEIGHT: 4560 Kg OVERALL DIMENSIONS: 3250 x 1960 x 2750 mm

Condition: new, Year of construction: 2025, MG20B is suitable for bending your steel into the desired shape. Product information: Cjdpfom Sgx Dox Afyjgp - Voltage: 380 V (optional with 220 V available) - Motor Power: 1,5 kW - Dimensions Machine: 60cm x 45cm x 32cm - Dimensions Machine frame: 57cm x 44cm x 60cm - Ideal for your construction company or also for your construction sites - Easy to carry - In addition to the individual bending process, a bending sequence can also be programmed - Stirrup head for different reinforcing steel Ø are included in the accessories (incl. accessories, see pictures) - Possible in automatic or manual mode - Bending capacities depending on steel strength according to table (see pictures) - Optional available with digital control panel - Net weight: 95 kg Shipping: Europe-wide (self-collection also possible) If you have any questions, please do not hesitate to contact us!

Year of construction: 2026, condition: new, MATRIX55S is suitable for cutting your rebar to the desired length (optional available with Synclone45S, Doublebender). Product information: - Hydraulic Motor: 7,5 kW - Synclone45S is optionally available for double bending - 360° swiveling digital control panel - Barcode system optional available Codpfom Tqazex Afyjgp - Total weight: 5200 kg Shipping: Europe-wide (self-collection also possible) If you have any questions, please do not hesitate to contact us!

Condition: new, Year of construction: 2026, SLS12 is suitable for Bending & Cutting your rebar from the coils to the desired shape. High productivity and fast solution for projects. Product information: Codpjm Tm H Aofx Afysgp - Single Wire: 6-12 mm - Double Wire: 6-10 mm - Driving Motor Power: 11 kW Servo - Driving Speed: 120 m/min - Bending Motor Power: 4 kW Servo - Bending Speed: 1200°/sec. - Voltage: 400 V 50 Hz / optional 60 Hz - HMI 15" Display - Coiler: 3 to. (optional 5 to.) - Dimension Machine: 5000mm x 1710mm x 2340mm - Dimension Coiler: 2150mm x 2120mm x 2300mm - Net weight Machine: 3000 kg - Net weight Coiler: 1000 kg Shipping: Europe-wide (self-collection also possible) If you have any questions, please do not hesitate to contact us!

Condition: ready for operation (used), Year of construction: 2021, travel distance X-axis: 3,700 mm, travel distance Y-axis: 2,100 mm, travel distance Z-axis: 200 mm, number of axes: 3, spindle motor power: 9,000 W, This 3-axis Omaksan Mastercraft 2137 was manufactured in 2021. It features a robust aluminum processing table, a 9 kW IOX spindle, and a 12-fold linear traveling tool changer. The machine includes a Beckhoff control system and drive motors, enhancing its precision and efficiency in wood machining. If you are looking to get high-quality milling capabilities, consider the Omaksan Mastercraft 217 machine we have for sale. Contact us for more information about this machine. Additional equipment • Software: Pegasus CAD software with Office license Machine Benefits Technical Machine Benefits • Control system: beckhoff • Table: aluminum processing table • Stop rail: aluminum stop rail in x and y direction • Tool changer: 12-fold linear traveling tool changer • Drilling spindles: 9 vertical drilling spindles, scm gearbox Codpfxjx U T Tmj Afyjgp • Vacuum pump: 2 x 250m³ becker vacuum pump Extra Information Machine still under power

Condition: used, This listing is for the Akta crossflow filtration system The unit is in full working condition and is ready for immediate use An ÄKTA Crossflow filtration system is a type of tangential flow filtration (TFF) system developed by Cytiva (formerly GE Healthcare). It's used primarily in bioprocessing and biotechnology applications to concentrate, diafilter, or clarify biological samples such as proteins, viruses, plasmids, and other biomolecule Core Functions: Concentration – Reducing the volume of a sample while retaining the target biomolecule. Diafiltration (Buffer Exchange) – Removing salts or changing the buffer environment by continuously adding a new buffer while removing permeate. Clarification – Removing particulates or cells from process fluids Key Components: Pump Modules: Typically peristaltic pumps that manage flow rates precisely. Filtration Cassettes: Hollow fiber or flat sheet membranes for ultrafiltration or microfiltration. Pressure Sensors: To monitor and control transmembrane pressure (TMP). Conductivity/pH/UV Detectors: For in-line monitoring of the filtrate and retentate. Cgsdpjxhf A Rjfx Afyop Benefits: Automation reduces operator error and variability. Scalable design for seamless transition from lab to production. Precise control of filtration parameters (flow rate, pressure, volume). CIP (Clean-In-Place) capabilities for easy maintenance and compliance with GMP. Common Applications: Protein concentration and buffer exchange Viral vector purification Plasmid DNA purification Cell harvest and clarification

Year of construction: 2016, condition: good (used), functionality: fully functional, The KS AluKap Duo is a machine designed for the production of aluminium profiles for roller shutters with interlocked curtain slats. It automatically cuts the profiles to the required length, assembles them into a curtain, and secures them. A key function of this machine is its capability to perform several operations simultaneously: cutting profiles to size, joining them to form the roller shutter curtain, and locking (interlocking) to prevent shifting after installation. Electrical connection: 3.5 kW, 400 V, 50 Hz. Shutter width: min. 500 mm – max. 3,500 mm. Label printing (optional): 36 x 89 mm. Machine transport is the buyer’s responsibility. We offer assistance with loading. Cgodpfxew Dm Hrj Afysp

Year of construction: 2023, operating hours: 0 h, condition: new, MT700K (optional MT600K) is suitable for compacting the ground. Product information: - Motor: Honda GX270 | GX200 - Power: 9 hp (Benzin) | 6,5 hp (Benzin) - Cubic Capacity: 270 cm³ | 196 cm³ - Dimension Plate: 700mm x 500mm | 600mm x 400mm - Length (Open Arm): 1570 mm | 1460 mm - Length (Closed Arm): 990 mm | 860 mm - Width: 500 mm | 420 mm - Height (Open Arm): 950 mm | 850 mm - Height (Closed Arm): 850 mm | 790 mm - Gradeability: 30% Cgodpfx Afsm Tipweyep - Centrifugal Force: 30 kN | 20 kN - Vibration Frequency: 90 Hz | 73 Hz - Fuel Consumption: 2,5 l/h | 1,7 l/h - Fuel Capacity: 6 l | 3,6 l - Oil Capacity: 1,1 l | 0,6 l - Net weight: 130 kg | 103 kg Shipping: Europe-wide (self-collection also possible) If you have any questions, please do not hesitate to contact us!

Year of construction: 2023, operating hours: 0 h, condition: new, H- & M-Series is suitable for cutting your rebar to the desired length. H-Series (hydraulic): H26, H38S, H45S, H55, SH60 M-Series (mechanical): M36, M45, M55 Product information: - Voltage: 380 V (16 A) - Motor Power: 2,2 kW - 7,5 kW - Adjustable blade stopper - Silent, safe and environment friendly - Less maintenance - Long product life - Ideal for your construction company or also for your construction sites Cgodpfx Afjm Shxijyep - Cutting capacities depending on steel strength according to table (see pictures) - Included in accessories: 1x additional blade, 1x allen key - Hydraulic Oil Tank Capacity: 12,5 lt. - 35 lt. (HLP32) | SH60: 163 lt. - Net weight: 120 kg - 960 kg Mechanical: - 0,8 sec. cutting time - High cutting performance - Foot pedal and arm control Shipping: Europe-wide (self-collection also possible) If you have any questions, please do not hesitate to contact us!

Year of construction: 2023, operating hours: 0 h, condition: new, HB12X6 (optional 12X3) is suitable for bending your reinforcing steel mesh into the desired shape. Product information: - Motor Power: 7,5 kW (5,5 kW) - Voltage: 380 V - Length: 6400 mm (3400 mm) - Width: 1000 mm - Height: 1090 mm - Hydraulic Oil Tank Capacity: 36 l - 6 m (3 m optional) - 3 stops - Bending angles: 45°-90°-135° Cgodpsm Tmddsfx Afyjp - Net weight: 1250 kg (710 kg) Shipping: Europe-wide (self-collection also possible) If you have any questions, please do not hesitate to contact us!

Year of construction: 2023, operating hours: 0 h, condition: new, RL2000 is suitable for compacting the soils such as asphalt. Product information: - Engine: Hatz - Power: 7,5 kW - Cubic Capacity: 349 cm³ - Fuel Consumption: 2,5 l/h - Battery: 12 V - Fuel Capacity: 4,3 l - Oil Capacity: 12 l - Drum Diameter: 400 mm - Drum Width: 600 mm - Length (Open Arm): 2400 mm - Length (Closed Arm): 1300 mm - Width: 710 mm - Height (Open Arm): 1010 mm - Height (Closed Arm): 1250 mm - Water Tank: 25 l - Hydraulic Oil Tank Capacity: 50 l - Vibration Frequency: 60 Hz - Centrifugal Force: 20 kN Cgsdsm Tk Sbjpfx Afyop - Static Linear Load: 5,6 kg/cm - Compaction Area: 2700 m²/h - Speed: 4,5 km/h - Gradeability: 40% - Net weight: 572 kg Shipping: Europe-wide (self-collection also possible) If you have any questions, please do not hesitate to contact us!

Condition: new, Year of construction: 2023, B-Series is suitable for bending your steel into the desired shape. B-Series: B26, B36, B45X1, B50 BS-Series (Double Bending): BS36, BS45, BS50, BS60 (MG65 PRO) Product information: - Voltage: 380 V (16 A) - Motor Power: 2,2 kW - 6 kW - Ideal for your construction company or also for your construction sites - Left & Right Bending possible (in the BS-Models) - In addition to the individual bending process, a bending sequence can also be programmed - Head for different reinforcing steel Ø are included in the accessories (incl. accessories) - Possible in automatic or manual mode - Bending capacities depending on steel strength according to table (see pictures) - Optional available with digital control panel - Net weight: 215 kg - 850 kg Shipping: Europe-wide (self-collection also possible) Cedpsm Shffofx Afyogp If you have any questions, please do not hesitate to contact us!

Year of construction: 2023, operating hours: 0 h, condition: new, MT900P is suitable for smoothing the concrete. Product information: - Motor: Honda GX200 - Power: 6,5 hp (Benzin) - Cubic Capacity: 196 cm³ - Power Diameter: 900 mm Cedpfx Ajm Tin Ijfysgp - Blade Diameter: 950 mm - Blade Qty: 4 - Blade Pitch Angle: 0-20° - Plate Weight: 16 kg - Length (Open Arm): 1910 mm - Length (Closed Arm): 1020 mm - Width: 950 mm - Height (Open Arm): 1100 mm - Height (Closed Arm): 930 mm - Fuel Consumption: 1,7 l/h - Fuel Capacity: 3,6 l - Oil Capacity: 0,6 L - Net weight: 100 kg Shipping: Europe-wide (self-collection also possible) If you have any questions, please do not hesitate to contact us!

Year of construction: 2023, operating hours: 0 h, condition: new, BCZ600 is suitable for sawing your stones/concrete. Product information: - Voltage: 380 V (16 A) - Engine Power: 3 kW - Engine Rotation: 1500 rpm - Frequency: 50 Hz - Table Size: 480mm x 380mm - Working height: Ergonomic height of 88 cm - Dimensions Machine: 1510mm x 750mm x 1530mm - Saw Diameter: 600 mm - Saw Thickness: 4,4 mm - Net weight: 186 kg Cjdpfxoncffve Afysgp Shipping: Europe-wide (self-collection also possible) If you have any questions, please do not hesitate to contact us!

Condition: excellent (used), Year of construction: 2021, MC 1100 multi-blade saw from 2021, practically unused, purchased as a backup. It can cut 2200 x 2800 mm panels twice in a row without losses. The machine features 4 motors, 3 idle pressure rollers, and a saw spindle for blades with a diameter of Ø200-Ø250 mm. It boasts a robust, compact design. The main control panel at the front is equipped with a smooth feed speed regulator, allowing precise adjustment to any material for optimal finishing quality. Pawls and top rollers minimize kickback risk, ensuring maximum operator safety. The one-sided open frame provides unlimited capability for cutting extra-wide, oversized elements without the need for additional devices. Includes 3 automatic transport rollers and rubber rollers between saw blades to reduce vibration of MDF panels and wood during processing. TECHNICAL DATA: Cutting width: 1100 mm Maximum cutting height: 50 mm Minimum panel length: 650 mm Feed speed: 5-20 mt/min Feed motor: 0.75 kW, 1410 RPM Maximum power consumption: 22 kW, 380V Power: 30 HP Maximum blade diameter: 250 mm Saw shaft diameter: 70 mm Cgodpfswyqvvjx Afyep Saw speed: 3500 RPM Maximum number of saw blades: 15 Working height: 900 mm Noise level: 80 dB Pressure: 8 Bar Dimensions (W/L/H): 1640x1495x1400 mm Weight: 1590 kg Infeed and outfeed table: Yes

Condition: new, Year of construction: 2024, functionality: fully functional, machine/vehicle number: GM-1400H, total width: 3,000 mm, total length: 5,000 mm, total height: 3,250 mm, type of input current: three-phase, energy consumption: 60 kWh, input current: 80 A, workpiece weight (max.): 2,720 kg, power: 48 kW (65.26 HP), workpiece height (max.): 950 mm, warranty duration: 1 months, working range: 319 mm, number of chambers: 3, Equipment: adjustable chassis, Conveyors are produced in such a way that they will not scratch the glass and leave no stains. The machine is made of steel and aluminum materials. Thanks to specially designed water sprays and brushes, the glasses comes out completely free from oils, stains and dust and cleaned. Angles of water nozzles will be adjustable. Conveyor rollers are produced of Ø 55 mm vulcanized rubber . Induction hardened gears are used in transmission gears. There will be 3 Washing Cabins, pre-washing, washing and rinsing washing system. In the pre-washing section, the upper and lower surfaces of the glass are washed with high-pressure spray nozzles. In the same cabin ,will be compressed air to the upper surface of the glass with air knife and the water will be completely cleansed. Thanks to this process, the glasses will go into the wash without entering the brush washing compartment, free from their dirt. There are 6 Brushes (Ø 120 mm.) in the Washing Machine and they will be able to wash laminated glasses. 2 of the brushes will be in the inlet (pre-wash) and 4 in the outlet (rinse-wash). there are brushes in total, 2 piece of them at the entrance and 4 pieces at the exit. 2 of the brushes will be suitable for laminated glass washing. the other 4 brushes will be for normal standard use. Features of brushes to wash laminated glass is ; Bristle material will be 6.6 P.A. The bristle diameter will be 0.15mm. The bristle length will be between 30-35 mm. Brush shaft will be produced of ASI 304L quality stainless material. During washing, the brush suitable for the laminated coated glass, whose properties are given above, will come into contact with the surface of the glass. To the other part of the glass will come into contact standard glass washing brush. The washing and air drying section will have an elevator system with a 350 mm opening and closing structure for maintenance and cleaning. Thanks to the elevator, the glass thickness (3-19 mm) can be adjusted easily. The speed of the conveyors will be adjustable between 0 m/min and 5 m/min. There will be a sound insulation cabinet in the drying fan. 1 piece of G4 filter and 1 piece of F7 filter will be at the air inlet of the drying fan . The filters will be of standard size and can be changed and will be 592*592*20 mm square type. 23. Thanks to the powerful air knives, the glasses will come to the exit conveyor dry. Csdor Ak Exjpfx Afyegp The height of the air knives will be adjustable. All pipes and hoses in the machine will be in a matte color to prevent algae formation in daylight. 26. Digital displays and many electronic equipment will be Delta or Schneider brand. There will be a stop sensor at the exit of the conveyor to prevent the glass coming from the machine from falling to the ground. There will be lighting system in the washing exit area for quality control from the bottoms and top of the conveyor towards the glasses. These lightnings will have the ability to be switched on and off separately. There are 3 separate water tanks in the machine. There will be an overflow water line that will prevent the water in the water tanks from overflowing.

Condition: good (used), functionality: fully functional, mileage: 67,003 km, power: 106 kW (144.12 HP), fuel type: diesel, gearing type: mechanical, overall weight: 2,790 kg, empty load weight: 1,840 kg, maximum load weight: 950 kg, first registration: 05/2024, next inspection (TÜV): 02/2028, loading space length: 2,800 mm, loading space width: 1,260 mm, loading space height: 1,300 mm, emission class: euro6, color: white, number of seats: 3, number of previous owners: 1, Equipment: ABS, air conditioning, airbag, all-season tires, car registration, central locking, cruise control, electronic stability program (ESP), immobilizer system, onboard computer, power assisted steering, second-hand vehicle warranty, sliding door, soot filter, truck registration, Special equipment: Driving Assistance Package: Drive Assist, wooden floor in the loading area and side paneling in standard version Additional features: Cgjdpfjymzbbex Afysp Driver and passenger airbags, audio controls on the steering wheel, multimedia audio system, electrically adjustable and heated exterior mirrors, flooring: luggage/load area floor (rubber), onboard computer, brake assist, DAB tuner (digital radio reception), front double bench seat with storage compartment, automatic headlights activation, driver assistance system: automatic light control including high beam assist, driver assistance system: autonomous emergency braking assist, driver assistance system: hill start assist (HSA), driver assistance system: high beam assist, driver assistance system: fatigue detection sensor, driver assistance system: emergency braking assist, driver assistance system: safety system with automatic emergency call (ERA GLONASS / eCall), driver assistance system: lane departure warning, driver assistance system: traffic sign recognition, vehicle keys (2), both folding, electric front windows with pinch protection, rear wing doors without glazing, bodywork: panel van, body variant: vehicle length L3, solid bulkhead, lumbar support for front left seat, adjustable steering column (steering wheel), headlight range control, model update, engine 2.0 L - 106 kW diesel, rear park assist system, wheelbase 3275 mm, tire repair kit, tire pressure monitoring system, low emission according to Euro 6e standard, interval wiper system, halogen headlights, sliding door on the right, SCR system (AdBlue technology), visibility package, manually adjustable front right seat, seat upholstery: fabric, steel rims 7x16, start/stop system, 12V socket in luggage/load area, 12V socket in center console, lashing rings in load area, seat belt warning system, passenger side, seat belt warning system, driver side

Condition: used, mileage: 238,000 km, power: 75 kW (101.97 HP), first registration: 08/2015, overall weight: 2,174 kg, fuel type: diesel, color: black, gearing type: automatic, emission class: euro5, loading space width: 1,170 mm, loading space length: 1,670 mm, loading space height: 1,200 mm, Year of construction: 2015, number of seats: 2, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), soot filter, * Differential taxation according to § 25a German VAT Act * DSG automatic transmission * 2 seats * Sliding door left & right * Portal doors * Air conditioning * Radio with 7-inch display * PDC (Park Distance Control) front & rear * Heated seats (driver & passenger) * Unladen weight: 1,429 kg * LxWxH: 1,670 x 1,170 x 1,200 mm * German government vehicle WhatsApp: Codpfsx Sa Skex Afyjgp Errors and prior sale excepted! Sale occurs under exclusion of any warranties!! - We speak Russian - We speak English - We speak Polish - ????? ???? - We speak Spanish