Used Gesan Dp 250 for sale (21,287)

Condition: used, Functionality: fully functional, Year of construction: 2019, operating hours: 32,514 h, load capacity: 2,500 kg, fork length: 2,350 mm, drive type: Lithium-Ionen, Low lift truck Cebjvt Hdkj Hhm U Iogt Load centre of gravity: 600 Condition: Reconditioned without guarantee Technical condition: good Battery voltage: 24V Battery Ah: 210Ah Description: Prices are subject to change, ex warehouse, plus freight and VAT. No warranty/guarantee and no returns. Inspection possible by arrangement. Our general terms and conditions apply. Solid side walls, small drawbar, PIN code, 12.5 km/h, servo-assisted steering, E-bar, PC/TC holder long arm, 12V socket, tandem Vulkollan fork rollers, Vulkollan drive wheel, single Vulkollan support wheel, medium battery compartment

Condition: used, Brand : AidaModel: NC2-25, Capacity 250mm, Stroke 280mm, Stroke per min 20-35, Slide to bolster 550mm, Slide adjustment 120mm, Slide area 2100 x 700mm, Bolster area 2700 x 920mm, Motor 30 kW, Single crank Cgob Hhep Dxwrom U Ijt

Condition: used, ESAB type LTG 250 electric welder Stick electrode welder Machine No. 736-820-387 Year of construction 1997 Power 250 Amp. = 35 % ED 190 Amp. = 60 % ED 150 Amp. = 100 % ED Power adjustment: stepless - Electrode holder with 6 meter connection cable - Direct current - fan-air cooling - possibly also TIG welding possible, without hose package Mains connection 380 Volt, 50 Hz, 32 Amp. Plug space requirement L x W x H 1200 x 750 x 1050 mm weight 180 kg good condition Unit was originally designed also for TIG welding. The hose package for TIG welding is not present and the function has not been tested. The water cooling was for the hose package for TIG welding. The unit is therefore sold only as an electrode welder. Cob Hhmjd N E Rvj U Iegt

Condition: excellent (used), Year of construction: 2008, Functionality: fully functional, A used four-column automatic punching press MABU with MPC200 control in very good technical condition. Compressive force 30° before UT: 250kN Stroke rate, infinitely variable: 80-400 rpm Stroke adjustment: 7-62mm Cgjb Hhmjuh U Etj U Iot Tool holder: Diameter 40H7x90mm Clearance between the front/side uprights: 404/334mm Further tech. Data see pdf- document. Tech. Data and dimensions: Errors excepted.

Condition: excellent (used), Year of construction: 1964, Compressor 250-250 Cgob Hhjqnuk Njm U Iet Year of construction 1964 250 l boiler 250 l Suction capacity 10 bar Oil change done

Condition: good (used), ALPA RVC - 250 Rotary table surface grinder -magnet diameter 300mm -Magnetic rotary table / two-stage -Height adjustment by hand -Grinding height approx. 130mm Grinding wheel pull-off device on the side -Coolant device -Machine housing -machine feet -Conversion of the electrics - New -Two spare grinding wheels -Operating tool Dimensions: LxWxH 1.2x1x1.8 meters /Weight 850Kg Errors / input errors excepted Cgeb Hjva Dzyjhm U Ijt

Condition: used, Year of construction: 1979, pressure 250 t distance between columns 600 mm stroke - mm total power requirement 22 kW weight of the machine ca. 9 t dimensions of the machine ca. 2 x 2 x 3,2 m No. 3421 Cgsb Hhjtqp Slsm U Iet Mould press 2500 / 700 kN Single stroke 2-hand Single stroke foot switch Automatic continuous run set-up and tipping Table 500 x 500 Working range: Pressure capacity 250 tonnes Drive: ^22

Year of construction: 2002, Condition: excellent (used), GALLUS TCS 250 5 colors year 2002 Configuration : 4 offset units 1 hot-foil stamping unit Cob Hheipqynom U Ijgt 1 offset unit 5 UV dryers UVITERNO AG size maxi 270 mm size mini 166 mm Flat-bed die cutting unit FLYE camera control stripping unit All electronics and software are new from 2018 Machine in excellent condition.

Condition: new, Year of construction: 2025, drop-through hole in table: 250 mm, table width: 900 mm, table length: 1,200 mm, stroke adjustment: 190 mm, pressing force: 250 t, ram bore: 60 mm, power: 18.5 kW (25.15 HP), punching force: 250 t, warranty duration: 24 months, Equipment: safety light barrier, STANDARD FEATURES: • STEEL CONSTRUCTION BODY • 4-SURFACE BEARING RECORD • DUCTILE IRON CONNECTING ROD AND ANGLE BEARINGS • CRANKSHAFT AND TRANSMISSION SHAFTS 4140 STEEL STEEL Cobevtyy Se Hhm U Iogt • CENTRAL SYSTEM FULLY AUTOMATIC GREASE LUBRICATION • PNEUMATIC CLUTCH AND BRAKE COMBINATION • COMPLIANT WITH CE SAFETY DIRECTIVES • DOUBLE COIL SAFETY VALVE • MANUAL ADJUSTABLE STROKE • AUTOMATIC ADJUSTABLE STROKE BETWEEN 150-300 TONS • PHOTOCELL PROTECTION CURTAIN • PLC CONTROL SYSTEM • TOUCH LCD SCREEN BETWEEN 150-300 TONS • DOUBLE-HAND PEDAL CONTROL SYSTEM • MECHANICAL INSURANCE SYSTEM • HYDRAULIC INSURANCE SYSTEM BETWEEN 200-300 TONS • EMERGENCY REVERSE MOTOR MOVEMENT • IN ACCORDANCE WITH OCCUPATIONAL SAFETY REGULATIONS • VIBRATION PREVENTIVE WEDGE • COUNTRY OF ORIGIN: TURKEY • WARRANTY PERIOD: 24 MONTHS • WE PRODUCE C TYPE ECCENTRIC PRESSES FROM 5 TONS TO 250 TONS. TECHNICAL SPECIFICATIONS: PRESSURE (TON) 250 AUTOMATIC STROKE ADJUSTMENT RANGE (MM) 20-190 NUMBER OF STROKES PER MINUTE (D/MIN-RPM) 45 RAM - REGULATION RANGE (MM) 100 RAM - TABLE DISTANCE (MM) 650 LOWER TABLE DIMENSIONS (MM) 900X1200 LOWER TABLE HOLE DIAMETER (MM) 250 RAM TABLE DIMENSIONS (MM) 450X780 RAM MOLD EYEBALL DIMENSIONS (MM) 60 MOTOR POWER (KW) 18.5 WEIGHT (KG) 12000 MACHINE DIMENSIONS (MM) (H - W - L ) • SINCE WE ARE A MANUFACTURER, TECHNICAL SPECIFICATIONS MAY CHANGE IF REQUIRED.

Condition: used, Year of construction: 1998, workpiece diameter with ratio 1:10 300 mm workpiece diameter with ratio 1:1 212 mm max. number of teeth 200 min. number of teeth 6 x-travel 300 mm X - Axis speed 0,1-5.000 mm/sec. y-travel 400 mm Y - Axis speed 0,1-5.000 mm/sec. A - axis -170 / +170 ° control Siemens Sinumerik 840 C total power requirement 38 kW weight of the machine ca. 10 t dimensions of the machine ca. 4,20 x 2,20 x 2,10 m incl. suction Cjb Hhmoul El Ts U Isgt

Condition: good (used), Metal crosscut saw TL 250 Cgeb Hhsmfr Huem U Iot With miter fence Uind mobile stand

Condition: excellent (used), Year of construction: 2002, clamping force: 800 kN, screw diameter: 30 mm, clearance between the columns: 370 mm, displacement volume: 106 cm³, injection pressure: 2,470 bar, injection weight: 97 g, ejector force: 400 N, plate width: 570 mm, overall weight: 3,180 kg, ARBURG Allrounder 80 T type 370C 800-250 in very good condition Cjb Hhouylurjm U Iegt Closing force: 80 T Year: 04 / 2002 Screw diameter: 30 mm Max. injectable volume: 106 cm3 Injectable weight: 97 gr Injection pressure: 2470 bar Platen dimensions: 570 x 570 mm Distance between columns: 370 x 370 mm Minimum mold thickness: 250 mm Machine weight: 3180 kg

Condition: used, Year of construction: 1983, wheel diameter 300 mm total power requirement 2,2 kW Cgebetqpy Ns Hhm U Ist weight of the machine ca. 250 t dimensions of the machine ca. 1,2 x 0,6 x 1,5 m Polishing Machine Drive: 2.2

Year of construction: 2023, operating hours: 1 h, Condition: as good as new (ex-display), The CD100 series of water and water jet machines range from 250 to 2050 bar with pump flows from 21 to 167 l / min. The pump is driven by a water-cooled 4-cylinder turbo SISU diesel engine. The frame surrounding all frames is made of hot-dip galvanized steel for long life and corrosion resistance. It is primed and painted. The footprint of the machine is 2100 x 950 mm. The frames are fitted with rubber feet under all four corners and the machine has forklift pockets and suspension eyes at all four corners. The machines have galvanized roof panels with side railings for protection and storage of, for example, high pressure hoses. Similar but not Dynajet, Falch, Hammelmann, Kamat, Kärcher, Oertzen, Uraca, Woma, etc. Available models: ----- Model Pressure Flow rate Cgeb Hhmehgbgqo U Ist CD100-250 250 bar 167 Lpm CD100-300 300 bar 135 Lpm CD100-500 500 bar 80 Lpm CD100-1000 1000 bar 42 Lpm CD100-1400 1400 bar 30 Lpm CD100-2050 2050 bar 21 Lpm General specifications: ----- Max. Pump speed: 750 rpm Drive engine: 4 Cyl. Sisu Turbo Diesel water cooled Drive motor power: 74.6 kW Drive motor speed: 1800 rpm Tank capacity: 140 L Max. Fuel consumption: 16.0 L/h Loudness (1m): 84 dBa Dimensions and weight: 2250mm x 950mm x 1300 mm (2000 kg) Standard accessories included.

Condition: new, Functionality: fully functional, machine/vehicle number: S-CL-250-FN-EC, input voltage: 230 V, overall weight: 35 kg, total width: 430 mm, total length: 340 mm, total height: 600 mm, volume flow: 250 m³/h, Equipment: type plate available, ISI S-CLEANER Mechanical air filter device (soldering smoke) for up to 2 workstations Type: 250 FN Version: Mobile Control: without Horizontal, mobile mechanical air cleaner with EC radial fan for separating soldering smoke. Cgsbsvrylfe Hhm U Ijt TECHNICAL DESCRIPTION: Air volume: - 240 m³/h (volume flow) - 170 m³/h (effective air output) (depending on the filter configuration without collection elements) Intake nozzle: 2 x NW 50 mm (rear) Filter configuration: - Pre-filter G4 - HEPA filter H13 - Activated carbon cassette (2.5 kg, refillable) Color: RAL 7035 light gray (optional: special color) Voltage: 230 V Frequency: 50 Hz Protection class: IP54 Fan technology: energy-saving EC technology Air output: not adjustable Dimensions: length 340 mm / width 430 mm / height 600 mm Weight: 35 kg

Condition: used, Year of construction: 1986, Technical details: turning diameter over bed: 530 mm turning diameter over slide rest: 320 mm Cgjb Hhmoqgi Rrj U Ist turning length: 2000 mm center height over bed: 275 mm speeds: 18 - 1600 U/min spindle bore: 60 mm bed width: 430 mm engine output: 17 kW weight: 2700 kg spindle taper: 7 dimensions of the machine ca.: 5,5 x 1,40 x 1,75 m - 3-chaw chuck Röhm D = 350 mm - tool holder system - approx. 10 pcs. tool holder - workpiece wheigt between centers 500 kg - many accessories in 2 pcs. tool cabinets *

Condition: excellent (used), MIKRON WF 3 DP universal milling machine TECHNICAL DATA Angular table clamping surface: 450 x 800 mm number of T-slots: 9 T-slot distance: 45 mm Weight: 144 kg Machine dimensions: 1475 x 1770 x 2000 mm Weight: 1800 kg Connected load: 8,7 kW Milling spindle drive spindle speed: 21 steps speed range: 25 - 2500 /min step jump: 1,258 power of spindle motor: 3,3 / 4,0 kW tool holder: ISO 40 / M16 quill movement, vertical: 110 mm Feed drive Feed rates in all 3 axes: Infinitely variable Cjbelnfggo Hhm U Isgt Feed range: 1 - 2000 mm/min Rapid traverse in all feed directions: 3000 mm/min Torque at motor longitudinal + transversal: 4 Nm Vertical: 8 Nm Displacement travel Longitudinal movement of the clamping table (X axis): Automatic: 400 mm Transverse movement of the clamping table (Y axis): Automatic: 400 mm Vertical movement of the clamping table (Z axis): Automatic: 385 mm For the correctness, completeness and topicality of the data we do not take over guarantee

Condition: used, Year of construction: 2004, turning diameter 250 mm turning length 100 mm control SIEMENS 840 D total power requirement 35 kW weight of the machine ca. 7500 kg dimensions of the machine ca. m E M A G (Germany) Vertical CNC Controlled Hard Turning and Grinding machine with tool turret and workpiece handling System Model VSC 250 DS Year 2004 # M7 28.69324 _____ Turning Ø, max. 250 mm Turning length internal / external 100 mm Workpiece length min./max. 29 – 100 mm 6-positon tool turret Ø / swing-Ø 480/790 mm Workpiece spindle Slide travel, X / Z / stroke 680 / 400 / 200 mm Feed rate / Quick feed X/Z 45/30 m/min. Feed force X/Z 5,5/11 kN Spindle speed 4.300 / 6.000 rpm Spindle drive 28 kW Total electrical load, approx. 35 kW - 400 V - 50 Hz Weight, approx. 7,500 kg Accessories / Special Features: * CNC – Continuous Path Control SIEMENS Model 840 D, with colour monitor, graphics, menu-supervised dialogue programming, and all the usual options, cycles and subprograms, etc. * Hexagon Tool turret head with 6 tool positions (Ø 40 mm) without motorized tools posts, two positions T 3 u. T 6 equipped with grinding spindles with 42.000 rpm and with 18.000 rpm, using CBN discs resp. regular grinding tools * Workpiece handling device with WP transportation frames and circulation system and pick-up and unloading of finished parts directly through the Cob Hhm Uot Hxa Tj Iogt motor spindle which is equipped with a hydraulic 3 jaws chuck make SMW Autobloc with membrane clamping and clamping control system. * MARPOSS MIDA Measuring Probe for measuring blank parts a. the finished parts * NORGREN air measuring system, hydraulic weight compensation of spindle, * Main elements of machine are temperature stabilized by a coolant system made by HYFRA * Recooler for the grinding coolant sitting on a large Coolant device consisting of SEITZ Paper Band filter and a mobile Chipconveyor, Magnetic separator, Centrallubrication, etc. Vertical CNC lathes offer a thermo-resistant construction (chips do not fall onto the machine bed),fast workpiece change times (pick-up system through the main spindle) and a ridged tool arrangement,which also allows unrelated machining work, like hard turning or grinding process on the same machine. Condition : Good. Machine can soon be inspected under power. Delivery : Ex stock, as inspected. Payment : Net, after conclusion of contract.

Condition: excellent (used), Year of construction: 2017, operating hours: 19,088 h, Krauss Maffei 250-1400CX with robot and gas boost (224) Description General information Product Code: 224 Availability: In Stock Year of production: 2017 Brand: KRAUSS MAFFEI Technical data Csb Houy Rpnehm U Isgt Shot Weight: 618 g Clamping Force: 2,500 kN Screw dia: 60 mm Injection pressure: 2005 bar Injection speed: 848 ccm/s Tie bar distance: 630x630 mm Platen size: 1135x1180 mm Mould height min.: 330 mm Type of controls: MC6 Language: German Power: 77,5 kW Workinghours: 19.088 h Weight: 19.300 kg Dimensions: 6,5x2,3x2,3 m Hopper: No Core pull: Yes Euromap: Yes Air valve: Yes Heating channels: Yes Gas bottle: Yes

Condition: good (used), Year of construction: 2005, Technical data: max. machining diameter: 380mm max. swing diameter over slide: 675mm max. distance between the spindles: 541mm max. bar capacity: 77mm Traverse path X - Y - Z axis: 230 / 100 / 575mm rapid traverse X - Y - Z axis: 30 / 21 / 33mm Main spindle Speed: 4.000min-1 Motor (100% / 30 min.): 22 / 26kW Spindle bore: 88mm Counter spindle Speed: 6.000min-1 Motor (25% ED) 7.5 kW Travel: 585mm Tool turret with driven tools Number of positions: 12 Max. Speed: 4.500min-1 Motor: 5.5kW Tool shank height: 25mm Tool shank diameter: 40mm Machine weight: 5.400kg Footprint L x W x H: 285 x 187 x 187cm Accessories: Loading and unloading robot Mitsubishi RV-12SL-S12 Cgjboufkh Ee Hhm U Iot Interface for bar loading magazine Automatic parts catcher Automatic door High pressure cooling 5 bar Chip conveyor

Year of construction: 2020, Condition: used, Year of manufacture: 2020 Field of application: Agriculture Make of bodywork: Pennaccnio Pompe 250 - 500 General condition: good Cob Hhm Ujvmiu Eo Iogt Technical condition: good Throughput capacity: 500 m3/h Max dirt passage: 250 mm Max. head: 500 MWK

Condition: reconditioned (used), Year of construction: 2013, Functionality: fully functional, machine/vehicle number: 9972309879, power: 7.5 kW (10.20 HP), rotational speed (max.): 1,450 rpm, Completely refurbished pumps from the manufacturer KSB: Type: ETACHROM BCF 80-250/754 Power: 7.5 KW and 5.5 KW Upgrade: Individual parts painted for improved corrosion protection, use of e-SIC GLRDs from the manufacturer Eagle Burgmann; replacement of all fastening screws with stainless steel screws; motor housing sealing with shaft seals; 2 pieces of each are currently available. Csb Hheuntwiem U Iogt All pumps have already been completely refurbished and are ready for shipping

Condition: used, Year of construction: 1996, core drilling diameter max. 25 mm bore depth 1000 mm swing diameter mm total power requirement 25 kW weight of the machine ca. 12,5 t dimensions of the machine ca. m T B T (Germany) CNC-Controlled Horizontal Deep Hole Drilling " Centre " Model BWP 250 Year 1996, but reconditioned mechanically and electrically in 2006 _____ Working range: X Axis, machine column cross 2,000 mm Cgjb Hhm Ust Hw Ayj Ijt Z Axis, drilling slide horizontal 1,200 mm Drilling depth 1.000 mm Y Axis, drilling slide vertical 1,100 mm Table clamping area 1,200 x 2,000 mm Drilling capacity in solid material, approx. 4 - 25 mm Tool holder taper HSK 50 Spindle speeds 1.260 - 15,000 rpm Feed rates / quickfeed, XYZ, infinitely variable 100 - 10,000/15.000 mm/min. Force rate of feed motors 27 Nm / 1.000 daN Spindle drive steplessly adjustable 7 kW Total electrical load, approx. 30 kW - 400 V - 50 Hz Weight, approx. 10,000 kg Accessories / Special Features: " Ideal machine for the complete processing of large workpieces like tool a. dies (cooling holes) mould- and dieplates, hydraulicparts etc. by means of deep hole drilling up to 25 x 1.000 mm, face milling up to Ø 60 mm, spiral twist drilling, counterboring and threading up to M 24 x 3 mm. " SIEMENS Continuous Path Control in 4 axes Model 840 D, with process monitoring for coolant pressure, operation data control function, toollife, feed force,Error diagnostics and easy dialogueprogramming directly on the panel, etc. " High Frequency Spindle Make GAMFIOR with stepless speeds " Hydraulically movable drill bush carrier, swivels 90° for holding gun drills (ELB) or picking up regular tools from the tool changer like twist drills, milling tools, taps, etc. " With automatic tool changer made by MIKSCH, Model CTM 40, using a 12-position tool changer, which is mounted on the r.h.side of machine housing, in fixed position, only moving forward and backward for tool changing operation. " Built-on indexing table as B-Axis made by FIBRO Model RTN 400 = 420 x 420 mm, " Extra Rotary Table made by FIBRO with Ø 1.000mm, for indexing 3-144 positions " Built-in coolant device with chip conveyor and various filters. " 2 steady rests. " Completely covered working area with access at the front and at the side. Condition : Very good condition. This is a rare and valuable machine. Under Power Delivery : immediately ex our Stock Payment : Net, after conclusion of contract.

Condition: used, Year of construction: 1983, workpiece diameter 250 mm centre distance 0 mm honing length max. mm max. module 5 Gear Ø, min./max. 10 / 250 mm Module range 1 - 5 Length of teeth / max. table stroke 500 mm Height of centres of tailstocks 220 mm Max. weight of workpiece 50 / 100 kg Honing head swivelling +/- 35 ° Speeds of honing tool 20 - 500 rpm Size of honing tool, Ø x width 300 x 40 mm Workpiece speeds 500 - 3,000 rpm Total adjustment of cross slide 270 mm Rapid traverse of cross slide 50 mm Infeed travel of cross slide, mechanical 1 - 8 mm/Ø Roughing / finishing infeed 1 - 29 / 0.2 - 2.8 mm/sec Table speeds, hydraulic 0 - 6 m/min Total electrical load 5.5 kW - 380 V - 50 Hz Weight 3,200 kg Accessories / Special Features * Working parameters can be preset using counters and control units. Automatic working process with workpiece counter. * All roughing and finishing infeeds can be adjusted by a decade switch; as well as by table reverse times and fast infeeds with preset times (1sec = Ø 0.04 mm), set on a potentiometer. Ampere display, etc. * Convex honing and conical honing are possible via templates. Asymmetric honing is also possible if the workpiece is prepared appropriately (i.e. pre-shaped). * Separate honing oil unit with magnetic separator and fine filter. * Mechanical tailstocks for manual loading. * Oil mist separator. * Sliding doors with foot switch. * Separate hydraulic unit. Condition : Good. Machine can be inspected under power. Delivery : Ex stock, as inspected. Cgsb Het Hwzpshm U Iot Payment : Net, after conclusion of contract. We have a large selection of gear machines available. Please let us know your requirements.

Condition: used, Year of construction: 1965, honing diameter 80 mm stroke 280 mm throat 300 mm total power requirement 6 kW weight of the machine ca. 2,6 t Honing Ø 10 - 100 mm Max. honing depth, approx. 250 mm Max. spindle stroke 260 mm Distance between spindle and column 300 mm Mounting height 1,000 mm Table size 350 x 500 mm Height of table above floor 500 mm Spindle speeds in 2 steps, infinitely variable, approx. 85 - 300 rpm 170 - 600 rpm Stroke speed, infinitely variable, hydraulic 0 - 23 m/min Spindle drive 2 kW Total electrical load 6 kW - 380 V - 50 Hz Weight 2,600 kg Accessories / Special Features Cgjb Hhst Hwupsm U Ijt * Built-on 2-station tilting table which accommodates 2 workpieces. Mechanical workpiece clamping, using a manual lever. * Hydraulic infeed of the tool. * Switch-off via timer. * Air measuring device (probably). * Honing oil unit. * Various splash shields, etc. Condition : Good. Machine can be inspected under power. Delivery : Ex stock, as inspected. Payment : Net, after conclusion of contract. Thank you for your interest. We have a selection of honing machines available. Please let us know what you need.