Used Gesan Dp 200 for sale (43,691)

Condition: used, Roll jaws, floating central jaws, pull-down jaws, machine vice jaws, clamping jaws -1 piece: pull-down jaw Bwsliktrofgrpgozol -Interior dimensions: 140/160 mm -Groove width: 8 mm -Dimensions: 200/30/H100 mm -Weight: 3.2 kg

Condition: used, thickness of jaw 200 mm weight 106 kg distance of clamping jaw max. 195/382 mm dimensions of the machine ca. 870/1230 x 200 x 170 mm Bwjliortciiektrzsl Note: without crank !

Condition: used, Hydraulic machine vise ARNO Jaw width: 200 mm Jaw height: 60 mm Clamping force: 8 ton. Clamping range: 0 to 370 mm Opening: max 373 mm Guide rail height: 140 mm -2 socket pins adjustable clamping ranges -Swivel base Dimensions L x W x H: 900 x 400 x 210 mm Bweliktrjd Amwiozel Weight: 125 kg good condition

Condition: excellent (used), Year of construction: 2004, clamping force: 2 kN, screw diameter: 65 mm, BILLION 200 T injection molding machine Reference : Hercule H1300/200 Year : 2004 Control type: DIXIT II Injection screw diameter: 65 mm 8 Mould heating zones 2 hydraulic cores Belikteu Iy D Dsrzowl 1 Pneumatic core 1 Blowgun

Condition: good (used), Good, used condition Few operating hours Motor: 11 kW Throughput up to a maximum of 200 kg / h Bjliktot Hxudsrzjwl Briquette: 150x60 mm

Condition: like new (used), Year of construction: 2017, Functionality: unexamined, total length: 890 mm, total width: 580 mm, total height: 352 mm, The MiR200 is an autonomous mobile robot (AMR) from Mobile Industrial Robots that is designed to transport loads of up to 200 kg. Bwsliktovt Elaorzol Incl. YJ LINK add-on module for circuit board magazines and charging station. Dimensions and weight: Length: 890 mm Width: 580 mm Height: 352 mm Ground clearance: 50 mm Weight (without load): 70 kg Colour: RAL 7011 Iron grey Payloads: Robot payload: 200 kg (maximum on a 5% gradient) Towing capacity: 500 kg (with MiRHook 200) Speed and performance factors: Range / maximum speed: 10 hours or 15 km Forward: 1.1 m/s (4 km/h) Backward: 0.3 m/s (1 km/h) Turning circle: 520 mm (around robot centre) Positioning accuracy: +/-50 mm to position +/-10 mm to docking mark Overcome tolerance for gaps and thresholds: 20 mm Product design lifetime: 5 Years Minimum width for corridors: 950 mm Space requirements and turning circle: Turning diameter at an obstacle/wall: Without load: 1.3 m Full load: 1.3 m (normal space requirements) Without load: 1.2 m Full load: 1.1 m (minimized space requirements) Power supply: Battery: Li-NMC, 24 V, 40 Ah External charger: Input voltage: 100-230 V AC, 50-60 Hz Output voltage: 24 V, max. 15 A Charging time: With cable: Up to 4.5 hours (0-80%: 3 hours) With charging station: Up to 3 hours (0-80%: 2 hours) Charging options: MiRCharge 24V, Cable Charger Environment: Ambient temperature range: +5 °C to +40 °C (humidity: 10-95%, not condensing) Protection class: IP20 Certifications: ESD certified, Cleanroom certified, ESD tested Noise level: 60-64 dBA (depending on floor conditions) Environment: For indoor use only Safety standards and approvals: Certifications: CE, EN1525, ANSI B56.5, ISO13849-1, EN61000-6-2 & EN61.000-6-4 Communication: WiFi: Dual band wireless (AC/G/N/B) Inputs and outputs: USB and Ethernet Bluetooth 4.0 LE: Range 10-20 m Sensors: SICK safety laser scanner: S300 (front and rear) 360° optical protection: Around the robot 3D camera: Intel RealSense™ (detection of objects in the travel path 50-1800 mm above the ground) Ultrasonic sensors: 4 pieces Attachment module: Max. height from the ground: 1800 mm Center of gravity: Less than 900 mm above the ground

Condition: used, Clamping angle, clamping aid -Bracket made of: aluminum -Clamping angle for: workpiece clamping -side stop rails -Dimensions: 1155/200/H160 mm Bwjliktrofgygaszjl -Weight: 22 kg

Condition: good (used), Internal article no.: 24080 Hydraulic machine vice Manufacturer: Hilma Jaw width: 200mm Max. clamping width: approx. 340mm Dimensions (LxWxH): 70x30x17cm Weight: approx. 120Kg Bwoliouxbwgsktrzol

Condition: refurbished (used), Year of construction: 2019, operating hours: 340 h, Functionality: fully functional, cutting length (max.): 3,400 mm, cutting width (max.): 1,400 mm, cutting width at rip fence: 1,250 mm, cutting height (max.): 155 mm, cutting height with scoring (max.): 155 mm, saw blade diameter: 450 mm, height adjustment type: electric, overall weight: 1,150 kg, extraction nozzle diameter: 120 mm, table height: 900 mm, rotational speed (min.): 3,000 rpm, rotational speed (max.): 6,000 rpm, type of input current: three-phase, pivoting range: 46 °, power: 7.5 kW (10.20 HP), Equipment: motor brake, scorer, Technical data: ===== Roller carriage length 3200mm Cutting length 3400mm Cutting height max. 155mm at 90°, 105mm at 46° Cutting width width stop 1250mm Saw blade max. Ø 450mm Table size cast iron table top 1200 x 655mm Additional table extension 750 x 655mm Table extension 1430 x 940mm Table height 900mm Main saw blade speed 3000 / 4000 / 5000 / 6000 rpm Saw blade retractable under table Ø 400 mm Saw blade swivel range from 0° - 46° Extraction nozzle Ø 120 mm / Ø 80 mm Bwjlovplu Hjiktrzjl APA saw blade quick-clamping system Electric motor height and swivel adjustment via positioning control Double ball bearing circular saw shaft ensures absolutely smooth running Digital displays for degree setting, cutting height, speed and cutting width Push button switch with electric soft start (start/stop) Safety device can be swung away to both sides Electronic, wear-free motor brake Net weight approx. 1150 kg Extensions/additional equipment: ===== WIDTH STOP ELECTRIC MOTOR ADJUSTABLE FOR CUTTING WIDTH OF 1250 MM Dimension input on the control panel above via positioning control to 0.1 mm. Stop can be folded down in the parking position to clear a table surface. Safety cut-off bar in case of danger of crushing between width stop and trolley SWIVEL DEVICE for the cross slide including built-in length stop LENGTH STOP WITH DIGITAL DISPLAY ON EACH STOP FLAP Fully assembled, adjustable to 0.1 mm (3 digital displays) with battery operation, length max. 3300 mm THREE-PHASE MOTOR FOR THE MAIN SAW WITH 7.5 KW (10 HP) instead of 5.5 kW REMOTE LOCK WITH 50 MM GRID Blocking of the upper carriage in the loading position on the far right. This allows large panels to be easily aligned on the machine. PRE-SCORING UNIT AUTO-EPS 0.55 KW (0.75 HP) Electromotor positioning for side and height adjustment via LED display and memory function; when the pre-scoring saw is switched on, the unit automatically moves to the set position values; When switched off, the unit automatically moves under the table into a side parking position, so that saw blades larger than Ø 350 mm can be used without removing the scoring saw blades ADDITIONAL CORNER TABLE 750 X 940 MM FOR CUTTING WIDTH 1250 MM as an additional table support in addition to the standard table extension

Condition: used, Clamping plate with T-slots, tensioning aid, plate field, welding table, welding table, plate boring machine -Width: 200 mm -Length: 1800 mm -Height: 45 mm Bjliktrsd N Hzlozowl -Groove width: 11 mm -Weight: 117 kg

Condition: used, Pneumatic cylinder, air cylinder, standard cylinder -Stroke: 200 mm -Piston: Ø 50 mm -Piston rod: Ø 20 mm -Dimensions: 65/65/H450 mm -Weight: 3 kg Bjliktrodkx Tnezswl

Condition: used, Gear motor, electric motor, three-phase motor Bwjlsckbg Noiktrzjl -Speed: 325/650 rpm -Power: 0.075/0.15 kW -Construction: B3 -Diameter shaft: Ø 25 mm -Protection class: IP 65 -Number: 1x motors available -Price: per piece -Dimensions: 400/230/H230 mm -Weight: 24 kg/piece

Condition: used, Gear motor, electric motor -Speed: 50 rpm -Power: 0.55 kW -Construction: B3 -Diameter shaft: Ø 25 mm -Protection class: IP 65 Bjliktrsckd Eqozowl -Number: 1x motors available -Price: per piece -Dimensions: -Weight: 26 kg

Condition: used, Marking prism, test prism, prism, angle prism, clamping angle, clamping prism, clamping cube -for: scribing plate, clamping plate -Number: 1x prism -Price: complete -Dimensions: 200/171/H92 mm -Weight: 12 kg Belikob Uhqtotrzswl

Condition: used, Gear motor, electric motor, electric gear motor -Speed: 19 rpm -Power: 0.18 kW -Construction: B3 -Diameter shaft: 30 mm -Protection class: IP 54 -Price: per piece Bjliktrjcmtnxszowl -Number: 2x available -Dimensions: 530/250/H220 mm -Weight: 31 kg

Condition: used, Converter for bottle vibrators, vibrating bottles, internal vibrators -Frequency converter -Number of vibrators: 1 -Cable length: about 6 m Bwjliktsb A Sxdjrzsl -Weight: 105 kg

Condition: used, Gear motor, electric motor -Speed: 68 rpm -Power: 0.55 kW Bwjlec R R Aujiktrzel -Construction: B5 angle -Diameter shaft: Ø 25 mm -Protection class: IP 54 -Number: 1x motors available -Price: per piece -Dimensions: 400/180/H200 mm -Weight: 21 kg

Condition: used, Roll Jaws, Floating Center Jaws, Pull-Down Jaws, Machine Vise Jaws -Steel jaw: 200 mm Bweliksfgwv Tjtrzjl -Hole spacing: 140 mm/Ø 11 mm -Dimensions: 200/18/H65 mm -Weight: 1.8 kg

Condition: used, Gear motor, electric motor, electric gear motor Bweliockbg Tsktrzel -Speed: 19 rpm -Power: 0.18 kW -Construction: B3 -Diameter shaft: 30 mm -Protection class: IP 54 -Dimensions: 640/250/H220 mm -Weight: 38 kg

Condition: used, Gear motor, electric motor, electric gear motor -Speed: 325/650 rpm -Power: 0.075/0.15 kW -Construction: B3 -Diameter shaft: 25 mm -Protection class: IP 65 Bjlikteckp S Eerzowl -Price: per piece -Number: 2x available -Dimensions: 410/210/H230 mm -Weight: 25 kg

Condition: used, Gear motor, electric motor -Speed: 40.5 rpm -Power: 0.55 kW -Construction: B5 -Diameter shaft: Ø 25 mm -Protection class: IP 65 -Dimensions: 445/230/H210 mm -Weight: 26 kg Beliec U Rigsktrzjwl

Condition: used, Clamping plate with T-slots, tensioning aid, plate field, welding table, welding table, plate boring machine -Width: 200 mm -Length: 1500 mm -Height: 40 mm -Groove width: 14 mm Bwslikjd N Hznjtrzjl -Weight: 80 kg

Condition: used, Gear motor, electric motor -Speed: 19.5/78 rpm -Power: 0.37/0.75 kW -Construction: B3 Bwjliksctg Rqotrzjl -Brake -Diameter shaft: Ø 20 mm -Protection class: IP 54 -Number: 2x motors available -Price: per piece -Dimensions: 400/210/H200 mm -Weight: 22 kg

Condition: used, Gear motor, electric motor, three-phase motor, electric gear motor -Speed: 19.5/78 rpm -Power: 0.07/0.3 kW Bsljcg N S Hjiktrzowl -Construction: B3 -Diameter shaft: Ø 20 mm -Protection class: IP 54 -Number: 3x motors available -Price: per piece -Dimensions: 455/210/H205 mm -Weight: 22 kg/piece

Condition: used, Wood milling cutter, milling head, milling tool, wood milling cutter, profile milling cutter -Outer: Ø 180 mm -Height: 35 mm -Radius: 25 mm Boljciv S Nsiktrzewl -Socket: Ø 30 mm -Weight: 5.8 kg