Used Gesan Dp 100 for sale (42,257)

Condition: used, Wood milling cutter, milling head, milling tool, wood milling cutter, profile milling cutter -Outer: Ø 180 mm Bwslsciv Tbera Dtbjl -Height: 35 mm -Radius -Socket: Ø 30 mm -Weight: 5.6 kg

Condition: used, Hydr. flat form scissor lift table FLEXLIFT FLUNDER type 1500 / 100 Bwjlrol Nbqcea Dtbsl (without hydraulic unit) Year of manufacture 1991 Nominal lifting capacity 1500 kg Lifting capacity (practically tested) 1000 kg (at approx. 350 bar) platform size 2100 x 1400 mm stroke max. 930 mm Overall height - bottom 100 mm (with mounting frame) Overall height - top 1030 mm Hydr. operating pressure 350 bar = lifting force 1000 kg Motor power of hydraulics 1,5 kW mains connection 400 Volt, 50 Hz - mechanical-hydraulic safety limit switches stop the lowering process when the safety bar is actuated - without hydraulic power unit - without electric control length of installation frame 2270 mm width of mounting frame 1580 mm height of mounting frame = height at bottom 100 mm dead weight of lifting table 500 kg good condition

Condition: used, Year of construction: 1994, Used premix BC – 10000 Lh Technical Overview: The used premix BC – 10000 Lh is configured as an industrial bottling unit created by BC in 1994, specifically the 10o model. This system is admirable given its production capacity of 10,000 L/h. It is underlined that the machine has been stored in conditions that allow its immediate operation. It can take place immediately following installation and proper assembly.  This used premix is actually located in the north of Italy. Operational and Maintenance Details of the Used premix BC – 10000 Lh: From an operational point of view, this used premix is presented disassembled. This indicates that the shipment of this machine will be fast. It is essential to note that technical manuals are available, an element that will significantly contribute to ordinary and extraordinary management and maintenance. These documents are indispensable resources to ensure the long-term operational efficiency of the system. Features of the CIP System: In terms of sanitization, the integrated CIP system is a crucial component of this used premix BC – 10000 Lh. This functionality is not an option but a necessity, given the importance of in-place cleaning in the bottling process to ensure compliance with sanitation standards. The effectiveness of this system directly influences the quality of the final product and the general efficiency of the production plant. Belovgubdera Dtbswl Overall rating of the Used premix BC – 10000 Lh: In conclusion, the premix model 100 presents itself as a machine with robust specifications and a history of reliability. However, interested operators and organizations should proceed with a thorough assessment of their operational needs and compatibility with this specific bottling machine model. Considering its capabilities, the availability of manuals, and the CIP system, it is a unit that, despite its age, retains some value in the appropriate manufacturing context.

Condition: refurbished (used), Year of construction: 2005, Functionality: fully functional, Giben Prismatic 2 SPT H.100, year 2005 after partial refurbishment - new motor and control! Cutting length 3800 mm Width of lifting table 2200 mm Number of grippers 5 Feedrate max 130 m/min Saw blade projection 100 mm Saw blade diameter max 400 mm Main motor power 11 kW Scoring saw YES Lift table YES Stop side Left Control GIBEN G-DRIVE RT Conformity marking CE mark Total connection 18 kW Floor: L 9572 x W 6645 x H 1800 Weight 7840 kg Status: dismantled Bolra Dsrx R I Hstbswl

Condition: used, Year of construction: 1980, pressing force: 100 t, bale weight: 600 kg, filling opening width: 1,100 mm, filling opening length: 1,625 mm, bale height: 1,100 mm, bale width: 1,100 mm, overall weight: 28,000 kg, power: 825 kW (1,121.69 HP), cylinder stroke: 2,300 mm, Machine has always been used as a backup for a larger machine. Machine is currently disconnected. The machine is in working condition, but could definitely use some attention. The machine leaks a little oil at some valves. Bwjlra Dtjvmqm Njbel We can offer parts, service and installation separately. The machine is currently in Greece.

Condition: new, Year of construction: 2025, total height: 4,000 mm, total width: 1,415 mm, total length: 1,415 mm, pressing force: 300 t, table width: 1,000 mm, table length: 1,000 mm, table height above floor: 1,300 mm, overall weight: 18,000 kg, retraction force: 100 t, operating pressure: 250 bar, STANDARD FEATURES - Steel construction body and parts with stress / welding tension relieved by vibration method - 8-surface slide / bearing for high precision and long-lasting use - PLC control and touch panel - Argon application for fixing elements and steel drawn pipes - EN ISO 15614-1/2017 welding application certificate accredited by TÜRK-AK and approved by WPQR and WPS. (Welding applications are supervised by "welding coordination engineers" certified according to EN ISO 14731) - Parallelism and perpendicularity tolerances are applied according to ISO AND DIN Norms. (≤ 120 microns/meter) - PARKER / REXROTH hydraulic unit - SIEMENS / SCHNEIDER electrical consumables - Automatic central lubrication system - Two-hand control - Cooling system TECHNICAL SPECIFICATIONS MODEL CHKSP 300/100 PRESSURE (TON) 300/100 Bslra Dtevm U Uqsbswl STROKE (MM) 800 POT CYLINDER STROKE (MM) 250 TABLE - RAM DISTANCE (MM) 900 TABLE SIZE (MM) 1000X1000 RAM SIZE (MM) 1000X1000 PRESS DEPTH (MM) 1415 PRESS WIDTH (MM) 1415 TABLE DIMENSION FROM FLOOR (MM) 1300 PRESS HEIGHT (MM) 4000 MAIN CYLINDER DIAMETER (MM) 390 POT CYLINDER DIAMETER (MM) 230 ENGINE POWER (KW) 30 PRESS WEIGHT (KG) 18000 COUNTRY OF ORIGIN: TURKEY WARRANTY PERIOD: 24 MONTHS DELIVERY PERIOD: 4 (FOUR) MONTHS DEPENDING ON ORDER PRODUCTION FROM 40 TONS TO 300 TONS IS AVAILABLE.

Condition: used, Gear motor, electric motor, electric gear motor -Speed: 3.55 rpm -Power: 0.55 kW -Diameter shaft: Ø 50 mm -Construction: B5 Protection class: IP 54/55 -Number: 3x motors available -Price: per piece -Dimensions: 630/300/H270 mm -Weight: 62 kg Bslecmkbcsra Dtbewl

Condition: used, Punching tool with Linar built-in punching brackets ABS-SCHWABE type 100/160 11 pcs. punching brackets, punching unit for press brake Year of manufacture approx. 1990 throat depth: 160 mm Punching capacity: 0.3 to 5 mm material thickness Hole diameter: 2 to 7 mm Installation height: 203 mm (only the punching bracket individually with punching tool) Bjlra Dtjdz Sp Hebjwl A ø 5 mm round punching tool is installed Punching bracket spacing: 195 mm - the tool unit was mounted on a hydraulic press brake Punching frame base plate dimensions L x W x H: 2500 x 345 x 37.5 mm Punching frame pressure plate dimensions L x W x H: 2500 x 173 x 20 mm Overall dimensionsL x W x H: 2500 x 345 x 300 Weight: 400 kg good condition

Condition: new, 8 St. range L-W-H 720 x 580 x 1000 mm weight 128 kg 100Kg je Lade Bwolra Deu Impmetbel Stable tool cabinet with 8 drawers, lockable. 2 x 75, 4 x 100, 1 x 150 and 1 x 200mm Internal dimensions: 620x450 mm. Maximum load per drawer 100kg!!! Furnishings: 32x boxes 75 x75 mm. 16x boxes 75 x 150 mm. 8x boxes 150 x 150 mm. 12x dividers long 32x short dividers 1x stacking tray

Condition: new, Year of construction: 2024, 2 in 1 = shear + press brake in one machine with control CYBELEC CybTouch 15'' shear capacity 3200 mm x 6 mm, throat 200 mm; press brake capacity 3040 mm, capacity 100 to; working hight 640 / 1240 mm, control CYBELEC CybTouch 15'', mot. back gauge 700 mm, shadow line, motor 7,5 KW Bwelra Dtjd Huukobjl dimensions 3700x1900x2400 mm, ca. 9000 kgs same machine with capacity L = 2200 mm or L = 1400 mm

Year of construction: 2016, Condition: new, Gas-fired recirculation chamber furnace max. temperature: 300°C external dimensions ( d x w x h): 2500 x 5300 x 8300 mm internal dimensions ( d x w x h): 1500 x 3800 x 3000 mm Bwjlra Decmr D Hetbjl control zones: 2 burners power: 4 x 90 kW fans power: 2 x 4 kW

Condition: used, Year of construction: 1992, Functionality: fully functional, installation height: 700 mm, pressing force: 250 t, table width: 1,250 mm, table length: 1,150 mm, ram stroke: 400 mm, die cushion stroke: 150 mm, Hydraulic double column press DUNKES HDS 250/10 Year of construction 1992 Technical data: Pressing force at 260 bar: 250 tons Rapid lowering speed: 365 mm/s Table clamping area approx.: 1150 x 1250 mm Ram clamping area approx.: 1150 x 1250 mm Die cushion area approx.: 800 x 1000 mm Die cushion pressing force (200 bar): 100t Die cushion stroke: 150mm Power requirement: 45 kw Belra Dtjup Si Hsbjwl Installation height: 700 mm ram stroke: 400 mm Conversion of the control system to SIEMENS (in 2005) Machine height approx. 5,400 mm TP language currently Polish

Condition: used, Pneumatic cylinders, air cylinders, standard cylinders, clamping cylinders Bslsd Stixera Dtbowl -DSG type: 1600/100/600 -Piston: Ø 100 mm -Piston rod: Ø 32 mm -Stroke: 587 mm -Number: 2x cylinders available -Price: per piece -Dimensions: 115/115/880 mm -Weight: 13.6 kg

Condition: as good as new (ex-display), Year of construction: 2024, Functionality: fully functional, machine/vehicle number: DHD/250/100, die cushion stroke: 200 mm, total height: 4,500 mm, table width: 1,200 mm, table length: 1,000 mm, installation height: 900 mm, pressing force: 250 t, total length: 2,000 mm, total width: 2,700 mm, ram stroke: 600 mm, control cabinet height: 1,800 mm, control cabinet length: 800 mm, control cabinet width: 500 mm, die cushion force: 100 t, operating speed: 170 mm/s, reverse speed: 250 mm/s, input voltage: 400 V, pressure: 235 bar, electrical fuse: 63 A, ram plate width: 1,200 mm, ram plate length: 1,000 mm, Euroblech 2024 trade fair machine - Hamburg location. Bolrottriaea Dtbewl

Year of construction: 1984, Condition: used, pressure 100 t throat 345 mm stroke 20-100 mm no. of strokes 60 Hub/min ram - range of adjustment 85 mm table surface area 980x650 mm ram surface 600x440 mm hole in the table Ø 200 mm table height 820 mm Bjlraoqwpv Se Dtbjwl tool hole in ram ¤7 65 mm weight of the machine ca. 7 t dimensions of the machine ca. 2000x2000x2900 mm

Year of construction: 2015, Condition: excellent (used), Manufacturer: S+S Separation and Sorting Technology GmbH Type: Unicon-D 2000/400/450/100 Year: 2015 Electrical data: Bwslra Dolatz Dotbol - 230 V - 0,7A - 50 Hz - IP 65 Inclusion dimensions: 2060 x 650 x 1260 mm Belt width: 390 mm Belt length: 2000 mm

Year of construction: 2001, Condition: used, SECOND-HAND HOT PRESS ORMA MOD. NPC-6/100 - New PLC with TOUCH SCREEN - platens dimensions 2500X1300 mm - additional plate - N. 6 cylinders - CE rules - year 2001 Belra Doimwbdetbswl - kw 2.2 - complete with manual and ce certificate

Condition: used, Year of construction: 1992, machine/vehicle number: 920544, current capacity:100 kVA throat:280 mm capacity at 50%:100 kVA pressure:1,1 t stroke:100 mm table-size:180 x 170 mm control:MPS-29-K-S-R total power requirement:279 kW weight of the machine ca.:1,3 t dimensions of the machine ca.:1,4 x 1,15 x 2,1 m Bjljcxxwnsra Dtbowl spot-welding machine with Nimak micro-processor MPS-32-K control, water-cooled, opto-electronic safety curtain, emergency cut-off

Condition: used, Pneumatic cylinder, standard cylinder, air cylinder, pneumatic stamp, air stamp -Stroke: 100 mm -Piston: Ø 32 mm Bwjlra Dtedkx S Sjbjl -Piston rod: Ø 12 mm -Total length: 290 mm -Total length extended: 390 mm -Dimensions: 48/48/H290 mm -Weight: 0.9 kg

Year of construction: 2015, Condition: excellent (used), Manufacturer: S+S Separation and Sorting Technology GmbH Type: Unicon-D 2000/400/450/100 Year: 2015 Electrical data: Bwjlra Dek Eakvstbsl -230 V -0,7 A -50 Hz -IP 65

Condition: used, Clamping plate, milling support, plate field, welding table, welding table, plate boring mill, clamping angle, clamping cube, clamping devices, clamping supports, clamping tool, clamping box, clamping tower -Clamping block: for workpiece clamping or placing material under it -Width: 100 mm -Length: 800/1000 mm -Height: 825 mm -Thread: M24 -with stand: 200 mm wide Belra Dtjcn Rd Eobswl -Number: 4x milling support available -Price: complete -Weight: 2566 kg

Condition: used, Gear motor, electric motor -Speed: 3.55 rpm -Power: 0.25 kW Bjlrajcmkbbj Dtbjwl -Construction: B5 -Diameter shaft: Ø 40 mm -Protection class: IP 54/55 -Number: 1x motors available -Price: per piece -Dimensions: 550/250/H280 mm -Weight: 40 kg

Condition: used, Pneumatic cylinder, standard cylinder, air cylinder, pneumatic stamp, air stamp, -Stroke: 100 mm -Piston: Ø 50 mm -Piston rod: Ø 18 mm -Total length: 340 mm -Total length extended: 440 mm Bwelra Dtedkx Tcobsl -Dimensions: 66/66/H340 mm -Weight: 2.1 kg

Condition: used, Wood milling cutter, milling head, milling tool, wood milling cutter, profile milling cutter Bwjlraociv S Ns Dtbol -Outer: Ø 180 mm -Height: 35 mm -Radius: 25 mm -Socket: Ø 30 mm -Weight: 5.8 kg

Condition: used, Print roller, printer roller, spindle, anvil roller, pressure roller -Print roller: unfortunately no type designation Bjlogprkusra Dtbewl -Technical dimensions: see photos -Dimensions: 295/100/H100 mm -Weight: 5.7 kg