Used Gesan Dp 100 for sale (42,211)

Condition: new, table diameter 2000 mm table load 10000 Kg Fpoln Hhdofv Ay Io Reg swivelling range 0 - 130 Grad turning speeds 0,02 - 0,2 U/min height adjustment 1450 - 2200 mm max. torque on the faceplate 20000 Nm engine output 1,5 / 2,0 kW welding current 1000 Ampere - Manual height adjustment. - Self-locking gearbox, therefore hardly any pre and after-run at eccentric Load. - Electronic components from Schneider, Siemens and Delta. - Frequency-controlled, stepless speed of the turntable. - High stability due to the robust construction. - CE certificate. The D-HBE series comes as a standard version with a cable remote control and a footswitch.

Condition: used, cfm A17/100 compressed air vacuum cleaner / liquid vacuum cleaner Ex protected! Fpolnstzxrxs Hhd Rjg See photo for further details and scope of delivery. For technical data, see type plate. Item condition: used, untested condition: used, untested Without OVP Without original packaging Example photos sample pictures A viewing in Wettringen is possible! For further questions you can contact us by email. The sale takes place exclusively to commercial interested parties for commercial purposes and under exclusion of any warranty for material defects and defects of title! With your purchase you confirm that you are working commercially or as a freelancer. Otherwise you violate our terms and conditions!

Condition: ready for operation (used), Haffner SL 100 Clamping and lifting the door pneumatically Fpjln Houzdn Tshd Rjg Door lock cutter Handle hole drill Face plate cutter

Condition: as good as new (ex-display), Year of construction: 2018, Functionality: fully functional, TECHNICAL FEATURES Cleaning working width mm 1000 Vacuum working width mm 1300 Area performance/hour (theoretical - practical) m²/h 6,000 - 3,600 Battery supply 36V Absorbed power W 2650 Traction feed IP code IPX3 BATTERIES Type Gel battery pack (6 pcs.) 6 V 240 Ah () Battery life h - min 5 h Battery compartment dimensions x number mm x Qty 540x295x380 X 2 Foln Hovnmipehd Repg BRUSHES Pad diameter x number mm - inch x Qty 508 - 20” x 2 Motor power x number W x Qty 500 x 2 Motor speed rpm 135 Head weight - specific pressure Kg - g/cm² 65;79;101 - 24;29;37 TRACTION Engine power W 900 Maximum forward speed Km/h 6 Climbing performance at full load % 2 Climbing performance when empty % 16 SUCTION Engine power W 600 Vacuum pressure (water column) mbar - mmH2O 165 - 1,700 Air flow rate l/s 32 Noise level dB(A) 67/59 (*) TANK Type Double tank Cleaning solution capacity l 150 Waste water tank capacity l 160 Weight (without/with batteries) Kg 296/584 Dimensions mm 1850x1100x1380

Condition: ready for operation (used), Year of construction: 2001, Functionality: fully functional, machine/vehicle number: 013352, travel distance X-axis: 2,500 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 750 mm, table width: 1,000 mm, table length: 3,220 mm, table load: 3,000 kg, spindle speed (max.): 5,000 rpm, number of slots in tool magazine: 30, TECHNICAL DETAILS x-path: 2,500 mm y-path: 1,000 mm z-path: 750 mm Fjln Hhevdagyjd Ropg Table surface: 3,220 x 1,000 mm Workpiece weight: approx. 3,000 kg CNC control: HEIDENHAIN TNC 426 Spindle holder ISO: 50 Milling spindle speeds: 20 - 5,000 rpm Tool changer: 30-fold Feed speed: 1 - 30,000 mm/min Rapid traverse: 30 m/min MACHINE DETAILS Total power requirement: 40 kW Space requirement: approx. 6.9 x 4.1 x 3.7 m Machine weight: approx. 21 t EQUIPMENT - RENISHAW measuring probe - Coolant unit with IKZ and chip conveyor - Various tool holders

Condition: excellent (used), Year of construction: 2005, operating hours: 37,065 h, Functionality: fully functional, machine/vehicle number: 11520000043, TECHNICAL DETAILS X-axis: 1,000 mm Y-axis: 1,000 mm Z-axis: 1,000 mm B-axis: 0.001° Speed range: 8,000 rpm Control system: Siemens 840D powerline + Shopmill Gear stages: 2 Tool holder: HSK 100 Tool positions: 270 / 360 Number of pallets: 2 Pallet size: 800 x 800 mm MACHINE DETAILS Foln Hhdotrxl Dj Repg Dimensions: approx. 4.4 x 3.2 x 3.3 m Weight: approx. 18 tons Operating hours: 37,065 h Switch-on time: 99,223 h EQUIPMENT - Electronic handwheel - Operating mode: 4 - Oil mist extraction - Internal cooling (IKZ): 40 bar - Paper band filter - Measuring probe: Renishaw OMP 60 - Chip flushing gun

Condition: new, 8 St. range L-W-H 720 x 580 x 1000 mm weight 128 kg 100Kg je Lade Stable tool cabinet with 8 drawers, lockable. 2 x 75, 4 x 100, 1 x 150 and 1 x 200mm Internal dimensions: 620x450 mm. Maximum load per drawer 100kg!!! Furnishings: 32x boxes 75 x75 mm. Fpoln Hhsu Imptjd Reg 16x boxes 75 x 150 mm. 8x boxes 150 x 150 mm. 12x dividers long 32x short dividers 1x stacking tray

Condition: used, Year of construction: 1993, operating hours: 95,192 h, Mannesmann Demag RA-100 compressor further details and scope of delivery see photo. Technical data see type plate. Item condition: used, untested condition: used, untested Without OVP Without original packaging Example photos sample pictures A viewing in Wettringen is possible! For further questions you can contact us by email. The sale takes place exclusively to commercial interested parties for commercial purposes and under exclusion of any warranty for material defects and defects of title! Feln Hhdstzxpwe Ropg With your purchase you confirm that you are working commercially or as a freelancer. Otherwise you violate our terms and conditions!

Condition: not inspected (used), Operational condition! Semi-Automatic Stencil Printer DIMA HS-100  This device is known for its high precision and versatility, thanks to its robust construction and motor-driven printing head, which moves on linear bearings. All printer settings can be precisely adjusted using an intuitive Windows-based interface, allowing for perfect configuration for every type of printed circuit board. The self-learning feature ensures quick and easy determination of the correct board position, simplifying operations and speeding up the production process. Fpolnsvptrye Hhd Reg Ask for additional information!

Condition: good (used), This is a continuously operating machine for the granulation of wet or moistened materials. The machine has an output of between 100 and 500 kg per hour, depending on the product Fpoln Heu T Ev Hshd Rjg Additional rollers with alternative bore diameters can be obtained from the manufacturers. Manufacturer: Alexanderwerk Floor Space: 120 x 100 x 180 cm Downloads

Condition: used, Functionality: fully functional, Year of construction: 2013, operating hours: 3,331 h, load capacity: 1,000 kg, lifting height: 2,700 mm, fuel type: electric, mast type: duplex, construction height: 1,850 mm, fork length: 1,150 mm, drive type: Elektro, High lift truck Load centre of gravity: 600 Mast type: Duplex Condition: Ready for use and fully functional Technical condition: good Front tyres type: Polyurethane Fsljvucwisn Hhd Rjpg Rear tyres type: Polyurethane Battery voltage: 24V Description: Foldable driver platform, integrated charger

Condition: used, Year of construction: 1970, pressure 100 t dimensions of the machine ca. 2 x 1,5 x 2 m strokes per minute 80 total power requirement 3 kW Fpoln Hhdsu Aw Tfo Rjg weight of the machine ca. 3 t

Condition: new, 8 St. range L-W-H 880 x 580 x 1000 mm weight 156 kg 100Kg je Lade Stable tool cabinet with 8 drawers, lockable. 2 x 75, 4 x 100, 1 x 150 and 1 x 200mm Internal dimensions: 770x450 mm. Maximum load per drawer 100kg!!! Furnishings: 32x boxes 75 x75 mm. 16x boxes 75 x 150 mm. 8x boxes 150 x 150 mm. 12x dividers long 32x short dividers Foln Hju Imf Iohd Rspg 1x stacking tray

Condition: good (used), Year of construction: 2019, Functionality: fully functional, Machine type: Amada - Schubert High Performance Saw used Make: AMADA - Schubert Type: CMB-100 CNC / TRB-SAV Year of construction: 2019 with thin blade technology in standard version, fully automatic Cutting range: 25-101 mm Blade feed: 0-30 mm/sec Saw blade: 360 x 40 x 2.5 Cutting speed: 56-210 min Weight: 2800 kg further technical details on request Heavy duty feeding system for automatic separation of round and square material from 30 - 100 (140) mm and up to 8 m in length Brief description: Our feeding systems are particularly low-maintenance and robust. They are mainly used in heavy-duty areas and forging operations. Fpjln Hhdsuv Hlke Reg 1 piece SAV 140/8 V-conveyor in standard design for processing bars up to 8 m in length. Make: Schubert General: Dimensions (L/W/H): 6500 mm/ 1500 mm/ 1500 mm Support weight: approx. 5 tons Transfer height: variable Number of supports: 4 pieces at a distance of approx. 1600 mm Drive: 2.2 kW geared motor with brake + friction clutch

Condition: new, Year of construction: 2022, Functionality: fully functional, Technical data = see data sheet PDF. Fslnoup Dzno Hhd Rjpg

Condition: new, Year of construction: 2023, saw blade diameter: 360 mm, High-performance Everising fully automatic circular saw (NEW) incl. magazine. For the use of thin-cutting circular saw blades (carbide / cermet) Basic data: Fpelnoq Ul Izj Hhd Rjg - Application range: 15-100mm round (rectangle 15-80mm) - Drive: 11 kW - Blade dimensions: 360 x 2.6 x 2.25 - Saw blade speed: 40 - 160 rpm - Weight: 4 tons - Dimension: 2900 x 7038mm (incl. magazine) Features: - Automatic loading magazine 6 meters (for round material 6 meters) - Emulsion cooling option - Siemens control system - Electromagnetic brake system - Direct-driven saw spindle for very high cutting performance - Ball screw spindle incl. servomotors for precise feed - Heavy-duty design - Minimum quantity lubrication - Inverter-controlled stepless cutting speed - Fully encapsulated, low-noise - Automatic cut and remnant sorting - etc. Other models available: P-50 ILA: Cutting range 8-50mm P-75 ILA: Cutting range 10-75mm P-100 ILA: Cutting range 15-100mm P-150 ILA: Cutting range 70-150mm P-160 ILA: Cutting range 70-160mm P-180 ILA: Cutting range 70-180mm P-230 ILA: Cutting range 70-230mm

Condition: used, Functionality: fully functional, Year of construction: 2013, operating hours: 3,717 h, load capacity: 1,000 kg, lifting height: 2,700 mm, fuel type: electric, mast type: duplex, construction height: 1,850 mm, fork length: 1,150 mm, drive type: Elektro, High lift truck Load centre of gravity: 600 Mast type: Duplex Condition: Ready for use and fully functional Technical condition: good Front tyres type: Polyurethane Rear tyres type: Polyurethane Battery voltage: 24V Fpjlevucwcjn Hhd Reg Description: Foldable driver platform, integrated charger

Year of construction: 2022, Condition: new, Cam controller Balluff BNS 819-D08-D12-100-10 with control cams Fjln Hon Dxtxshd Rjpg Cam switch mechanism Balluff BNS 819-D08-D12-100-10 with cam bearing 107 Bearing 107

Condition: new, feed pressure 8 bar Effective free air delivery 250/350 L/min Receiver capacity 100l / 10bar l / bar Fpjln Hhdou Imd Ds Rjg weight of the machine ca. 67 kg. Number of cylinders 2 Stk. motor 230V / 2,2KW V / KW range L-W-H 940 x 430 x 950 mm

Condition: excellent (used), Functionality: fully functional, power: 11 kW (14.96 HP), Steel bar shears make Schubert, type STS 100 Used, very good condition Technical data: Shearing force/diameter (max.): 1000 kN/52 mm Drive power: 11 kW Fpeln Hjtukqqshd Reg Equipment/special features: bar magazine, 6 m, length stop 650 mm, safety device

Year of construction: 2023, Condition: new, machine/vehicle number: 28086221201 (AABM0013), MASTERWOOD CNC machining center type PROJECT TF 100 2.0 "PARTNERSHIP EDITION" - MAST0337 Technical data: Axes: X axis: Max. Workpiece length: unlimited Min. workpiece length: 250mm Traversing speed: 0-25 m/min. Y-axis: Max. Workpiece width: 1.000mm for all aggregates Min. workpiece width: 85mm Traverse speed: 0-50 m/min. Z-axis: Max. Workpiece thickness: 60mm Min. workpiece thickness: 10mm Traverse speed: 0-20 m/min. Aggregates: 16 drilling head: vertical spindles in X-direction: 5 pcs. vertical spindles in Y-direction: 5 pieces horizontal double drilling spindle in X-direction: 2+2 pieces horizontal double drilling spindle in Y-direction: 1+1 pieces distance drilling spindles: 32mm speed of drilling spindles: 4.000 rpm. motor: 1,7 kW grooving saw: in X-direction Speed of rotation: 4.000 rpm. Max. saw blade diameter: 125mm Motor: 1,7 kW (the grooving saw is integrated in the drill head) Control system: Personal computer Fjlnoiukvks Hhd Rjpg Operating system: Windows 10 Pro - 64 bit Processor: Intel Hard disk with at least 300 GB of storage space CD-ROM drive Color monitor Video card integrated 2 Ethernet cards Program: MASTERWORK MACHINE VERSION Other data: Required air pressure: 8 bar Air consumption: max. 750 l/min Extraction: Volume: 2,000 m³/h Air speed: 25 - 30 m/sec. Suction nozzle: 1 x 150mm Other equipment features: - Air tables at the working area - Roller table at infeed and outfeed - Sensor for plate measurement - Ball screw and linear guides - Rack and pinion drive - Import of DXF files (operating instructions, switching and pneumatic diagrams are in digital form) "PARTNERSHIP EDITION" consisting of: Milling unit, incl. MASTERWORK software extension Speed: 1.000 to 18.000 rpm. Motor: 4,5 kW with ISO 30 intake Incl. integrated suction control (During drilling only the only the drill head is extracted, for milling only the milling unit is extracted) 6-fold tool changer 3 pieces ISO 30 collet chuck incl. collet chuck Tool equipment, consisting of: HW dowel drill: 5 pieces 5mm - GL 70mm - blind hole drill. 1 piece 5mm - GL 70mm - through hole drill bit 4 pieces 8mm - GL 57,5mm - blind hole drills 2 pieces 10mm - GL 57,5mm - blind hole drills 1 piece 10mm - GL 70mm - blind hole drill bit 1 piece 8mm - GL 70mm - blind hole drill bit 1 piece 15mm - GL 70mm - blind hole drill bit 1 piece 35mm - GL 70mm - blind hole drill bit 1 HW grooving saw blade d=125mm, bore=20mm, width: 4,0mm, Z=35 WSA 1 DIA cutter, right - GL=103mm, NL=43mm, D=18mm, shank: 20x50mm, Z 1+1 1 DIA cutter, left - GL=103mm, NL=43mm, D=18mm, shank: 20x50mm, Z 1+1 1 VHW-WP finishing cutter, right, D=10mm Foldable roller conveyor in the infeed Foldable roller conveyor in the outfeed Automatic central lubrication plus options: Complete package for CLAMEX connectors € 3.500,00, complete door package € 3.500,00, software package PaletteCAD start + CAM connection € 3.000,00, freight, installation, instruction € 3.000,00, immediately available from location Seevetal, subject to prior sale.

Condition: new, width of the strips 100 mm Feln Hsupxm Eehd Rjpg band length 1220 mm band speed 1140 m/min. 0,62 x 0,4 x 0,35 cm total power requirement 1,5 kW weight of the machine ca. 0,04 t dimensions 0,97 x 0,67 x 0,37 m This machine can also be mounted without a base. Therefore it is suitable as a table belt sander. Base is included. Connection voltage 230 volts.

Condition: new, table diameter 350 mm table load 100 / 50 Kg swivelling range 0 - 90 Grad tilt adjustment: manually/mechanicall manuell turning speeds 0,5 - 5,0 U/min spindle bore 30 mm Torque 150 Nm welding current 500 Ampere connected load frequency 230 Volt Welding turntable with hollow shaft 100kg capacity With through hole rotation and tilt axis Felog Rk Dlsn Hhd Rjpg Infinitely variable speed Compact model Incl. foot pedal

Condition: new, 100 x 5 mm square edge steel 16 x16 mm round bar steel 18 mm Fpsln Hheht R Hqjd Rog L-beam 100 x 8 mm dimensions 400 x 290 x 280 mm weight 35 Kg

Condition: new, 100 x 5 mm Folefv H E Ten Hhd Repg square edge steel 16 x16 mm round bar steel 18 mm L-beam 100 x 8 mm dimensions 0,9 x 0,25 x 0,3 m weight 0,025 t