Used Floorpul Ruby 55 for sale (22,142)

Condition: as good as new (ex-display), Year of construction: 2006, Functionality: fully functional, machine/vehicle number: 0605.1283, TEMA flat vibrating screen Type OZB 90/360-55. Drive 2x Unbalance P= 2,1 kW. Screen deck width 900mm. length 3,600mm. Including: support frame (as visible in the picture). Is in good condition. Few running hours. Bslqzaoqwclqj Rxswl Has always been used as a demo/test screen. Available immediately.

Condition: used, mileage: 287,850 km, power: 132 kW (179.47 HP), fuel type: diesel, gearing type: mechanical, overall weight: 7,490 kg, first registration: 12/2013, emission class: euro5, number of seats: 3, Equipment: ABS, crane, Very well maintained MAN TGL 8.180 tipper from 1st hand with a Hiab 55 D crane with grab control (5+6 control circuit). The vehicle is from 1st hand * Hiab 55 D 2 Duo * Working height 10.2 m * Lateral outreach * 2,50 m ? 1,900 kg * 3.90 m - 1,240 kg * 5.40 m - 860 kg Bolqza Revhy N Noxjwl * 7.20 m - 640 kg * 5 + 6 control circuit * 2 clamshell buckets * Trailer coupling * Ball head AHK * German vehicle * From 1st hand * 3 seats * Diff lock * Radio CD * Roof hatch * EURO 5 * Green sticker * Payload 1,760 kg * Financing available through our partner banks, we will be happy to help you. We expressly reserve the right to prior sale, as we also offer this item on other portals. Accessories without guarantee. Subject to alterations, prior sale or errors excepted. We offer and strongly recommend a viewing and inspection to ensure that the buyer has no misconceptions about the condition and suitability of the item. Viewings and inspections are possible at any time by appointment and are expressly desired.

Condition: used, Year of construction: 2021, operating hours: 831 h, Equipment: ABS, Doosan DX 55-9C * Dead weight 5.5 t. * Transport length 5.85 m. * Transport width 1.88 m. Bwslqzsullmdea Rxel * Transport height 2.56 m. * Bucket capacity min. 0.18 m³ * Track width 400 mm. * Driver protection Kb. * Reach 6.15 m. * 2 x proportional control * Powertilt with Lehnhoff system * Air conditioning * ZLG 5500 KG * Engine 41 KW 56 HP * Blade support

Condition: used, Treif model: 08 55 Bwslodrmnmsqza Rxel stainless dicer, max product 350mm x 90mm x 90mm, variable speed

Condition: used, mileage: 574,897 km, power: 266 kW (361.66 HP), first registration: 01/2012, number of seats: 55, gearing type: automatic, emission class: euro5, color: white, brakes: retarder, Year of construction: 2012, Equipment: ABS, air conditioning, bathroom, onboard kitchen, parking heater, sleeping cabin,

Condition: good (used), Year of construction: 2002, Underframe with funnel and chain conveyor for material discharge Filter area designed as an inlet or filter chamber with externally loaded filter hoses stabilized by support baskets, pressure relief device in accordance with VDI 3673 Clean air area with purge air fan mounted on trolley, access to the clean air area through maintenance door via ladder with platform and back protection according to UVW Circuit to control the cleaning (depending on the differential pressure) and the material discharge First commissioning in 2002 including rotary valve type V7 (pressure-tight) 1 "dry" fire extinguishing system 1 transport fan (clean gas) 4 vibration dampers Bjlqohbv A Asza Rxswl 2 Flexible connections 1 circular flow line to feed two on-site containers 2 toggle switches 3 galvanized electric shut-off valves for shutting off the ring running pipe u tue fresh air intake when loading the silo 1 return air duct with 180 degree deflection and simultaneous pressure relief 1 splitter silencer 1 electric switch cabinet ES up to 140 KW 1 complete level indicator for chip bunker 1 pressure measuring device for suction 1 frequency converter type Danfoss VLT 6000 for transport system Filter system Filter area 522 m² - filter hoses 152 pieces (renewed approx. 1.5 years ago) - 1. Extraction fan D = 710 mm, motor 45 KW, volume flow 23,760 m³ / h. / 1475 rpm. at 50 Hz max. volume flow 31,000 m³ / h. / 1860 rpm. at 63 Hz - 2nd exhaust fan D = 710 mm, motor 45 KW, volume flow 23,760 m³ / h. / 1475 rpm. at 50 Hz max. volume flow 31,000 m³ / h. / 1860 rpm. at 63 Hz - 3rd chip transport fan (to the silo) D = 315 mm, motor 18.5 KW, volume flow 6,200 m³ / h. / 2935 rpm. at 50 Hz - Intake socket D = 570 mm / D = 450 mm / D = 350 mm - Chain discharge 0.55 KW - Cleaning with a purge air fan 5.5 KW - Control cabinet with control and 3x Danfoss frequency converters Filter dimensions approx. Width = 2400 mm x length = 7500 mm x height = 9750 mm (discharge 2550 mm + 2400 + 2400 + 2400 mm = 9750 mm) Dimensions fan return air housing (2x) approx. Width = 1700 mm x length = 2000 mm x height = 4900 mm Total length of the system (filter + 2x fan return air housing) approx. 18.5 m New price of the system over € 200,000,-- More photos on our website

Condition: good (used), Technical data for the pallet rack traverse: Racking system: Jung Heinrich Type: Esmena Included in delivery: 01x pallet rack traverse, used material color: yellow type of truss: GNA145x55SEG5 box profile: 145 x 55 mm agraffe: 5 hooks clear width: 3.610 mm max. load per truss pair 3.500 kg, with evenly distributed load 02x safety pins, used design: compl. galvanized To secure the longitudinal beams Bwjlqeh Hi Tdjza Rxsl against unintentional lifting out General information about the article: This article is only offered for pickup. A desired transport or a shipment of this article is associated with additional costs, which can be requested separately depending on the delivery location or scope of delivery with us.

Condition: used, fuel type: diesel, motor manufacturer: Cummins 4BTA3.9-G2, Field of application: Construction Empty weight: 1.200 kg Generator capacity: 55 kVA Transport dimensions (LxWxH): 2.5x1x1.25 Please contact Sales Department for more information Bslqzst T Tkaja Rxjwl

Condition: new, overall weight: 55,000 kg, axle configuration: 3 axles, loading space length: 10,650 mm, loading space width: 3,040 mm, loading space height: 3,900 mm, Year of construction: 2022, Equipment: ABS, Technical data for EBERT TLS 43 ATV special low loader: * Permissible fifth wheel load: 19,000 kg * Permissible axle load: 36,000 kg * Permissible total weight: 55,000 kg * Empty weight according to DIN approx.: 15,500 kg * Low bed length i.L.: approx. 6,650 mm + 4,000 mm * Axle table length: 3,550 mm * External width: 2,550 mm * Loading edge/low bed: approx. 200 mm - 350 mm * Sliding table length: 500 mm * Widening/low bed to: 3050 mm * Low bed/telescopic by: 4,000 mm * B-dimension: 13,300 mm * Entire vehicle flame-spray galvanized, with epoxy resin primer and 2K paint * Extra-wide signage at the front and rear with red/white signs Wheels: 13 x Michelin 245 / 70 R 17.5 X MULTI T VB 143J/146F  Steering: TRIDEC DLS with Tritronic  Axles: 12,000 kg ? DLS independent wheel suspension, hydraulically steered and hydraulically sprung     Front loft bed: * Side walls 600 mm high * Corners on the loft bed angled at the front * Doors in the left and right corners accessible from the outside * Lockable storage box with lid behind the front wall, height 600 mm, width 2,480 mm, depth 7,500 mm * Spare wheel on the loft bed, behind the partition on the right * Stairs on the right-hand side to get from the low bed to the front loft bed * Hydraulic coupling for uncoupling on the left-hand side 6-way Multi-Faster coupling * 6 lashing positions 3,000 kg version outside on the loft bed (drop lashing eyes) * 2 lashing positions 5,000 kg version at the top of the longitudinal strands (to the rear)  Low bed: * Climbing aids on the boom ? Extension * Outer frame t=8 mm * Low bed can be telescoped by 4,000 mm and locked every 500 mm Bolqza Rsh Tvm Ioxjwl * With sliding table, lockable every 250 mm * 28 lashing positions 10,000 kg, outside version in the outer frame * 24 plug-in tubes 90 x 90, evenly distributed to widen the low bed to 3,050 mm * 50 mm hardwood planks are placed between the extension tubes, 10 mm overhang  High bed at the rear: * High bed slanted towards the front and perforated, for retrofitting ramp support profiles, using adapters, galvanized version * Ramp support profiles at the rear (Altec) ? C - rails * 8 lashing positions 10,000 kg version on the outside of the raised bed * 6 lashing positions 5,000 kg version in the excavator trough * 10 lashing positions 5,000 kg version for extra width in the outer frame * Excavator trough closure at the front and rear with a wooden base plate (plug-in)  Electrics: * Use NATO coil, power comes from the towing vehicle * Rotating beacon in the middle of the rear * Side lights in LED version * Standard rear light for vertical mounting (LC5) * Work lights on the raised bed, to illuminate the low bed * Extra width signs at the front and rear for controlling uncoupling, sensor for safety and pressure switch for the suspension Air: * Aluminum air tank 80 l * TEBS modulator * Locking pull-out left and right (valve on the side in the raised bed at the back) * Double release valve  Hydraulics: Hydraulic system on the High bed for steering, suspension and detachable gooseneck   Accessories: * 2x 4 wooden planks as support for widening the low bed and intermediate table * 2 safety wedges for uncoupling * 4 wheel chocks We can make you a leasing or financing offer on request., Mr. Ebert (Tel. will be happy to assist you., You can find further information on our homepage., Subject to errors and prior sale!

Condition: used, Year of construction: 1983, bore capacity in steel (diameter) 60 mm arm length 2000 mm workpiece height max. 1790 mm bore capacity in cast iron 70 mm spindle turning speed range 28 - 1250 U/min spindle taper MT 9 spindle stroke 330 mm feed range - spindle 0,1 - 1,12 mm/U horiz. adjustment of drilling head 1540 mm Belqza Rstv Immexswl base plate 1840 x 1000 mm spindle drive 7,5 kW stroke drive 3 kW voltage 500 V / 50 Hz total power requirement 11,2 kW weight of the machine ca. 5,5 t dimensions of the machine ca. 3,3 x 1,1 x 3,1 m electr./hydraulic column clamping, cube table 500 x 600 x 500 mm, coolant device

Condition: as good as new (ex-display), Codition : Unused, year 2019 Brand : Rotodyne Asselbergs Type : CV-1120/900-D16 Weight : 1450 kilograms Bwelqza Rovxlw Toxol All employees speak Dutch, German and English Prices are exclusive of VAT Shipping is possible (surcharge) (Changes and errors in the technical data, information and Prices and prior sale reserved

Condition: good (used), Year of construction: 1974, Eccentric press, single-column press, punching machine, single-column eccentric press, eccentric press, single-column press -Manufacturer: Kaiser, punching machine with pliers feed type PO 40 F -Plier feed max. width: 175 mm -Pressure capacity: 55 tons Belqoilq H Ujza Rxowl -Stroke: adjustable 9 to 60 mm -Stroke number: 70-350 strokes/min -Table size: 590 x 410 mm -Table recess: 290 x 150 mm - Throat: 220 mm -Punch holder: Ø 38 mm -Insert height 335 mm -Dimensions: 1905/1540/H2940 mm -Weight: 3720 kg

Condition: used, Technical data for the connection plate: Manufacturer: META Type: META CLIP The scope of delivery includes: 01x connection plate, used Design: single Material color: sendzimir galvanized Bwelqzsrntl Uoa Rxel Total height: approx. 75 mm Total width: approx. 55 mm Material thickness: approx. 1.5 mm Weight per unit approx. 0.060 kg Currently available in stock: approx. 300 pcs. Your contact person in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch General information about the item: This item is only offered for collection. Any additional transport or shipment of this item is subject to additional costs, which can be requested from us separately depending on the place of delivery or scope of delivery.

Condition: good (used), Year of construction: 2004, operating hours: 76,000 h, Functionality: fully functional, clamping force: 4,200 kN, screw diameter: 70 mm, clearance between the columns: 800 mm, displacement volume: 1,047 cm³, injection pressure: 1.778 bar, Equipment: documentation/manual, injection moulding machine KRAUSS MAFFEI KM 420-1900/55 CZ warehouse no.: 503534 manufacturer: KRAUSS MAFFEI type: KM 420-1900 55 CZ controller: MC 4 year of construction: 2004 operation hours: 76000 h technical data clamping unit clamping force: 4200 kN distance between tie-bars h x v: 800 x 800 mm size of mould plates h x v: 1270 x 1200 mm min. mould height: 380 mm max. open daylight: 1400 mm opening stroke: 1020 mm ejector stroke: 250 mm ejector force: 95 kN centering diameter of moving platen: 200 mm centering diameter of fixed platen: 200 mm weight of mould: 6700 kg technical data injection unit screw diameter: 70 mm swept volume: 1047 ccm injection pressure: 1778 bar screw length: 20 l/d screw speed: 527 min plasticising rate: 95 g/s PS injection rate into the open: 953 g/s PS Belqzevirx Eea Rxewl number of heating zones: 6 technical data 2. injection unit 55 with ø 22 Injection pressure: 1674 bar Volume: 30cm³ Distance between sprayer 1 and 2: 300 mm (piggyback ) measures & weight measures of machine l x w x h: 9.83m x 2.33m x 2.48m total weight: 23090KG equipment included screen text german core pulling hydraulically 6x Machine without Handling machine without material hopper Anti vibration mounts mould heating 16x Injection moulding machine for two components

Condition: ready for operation (used), X-travel: 500mm, y-travel: 250mm, z-travel: 145mm, table dimensions: 885x320mm, max. load: 250kg, rotational speed: 50-10,000/min, controls: HEIDENHAIN TNC 407, weight: 2.4t, operational hours counter: ca. 39,900h. Bwslqzohcxfpoa Rxjl

Condition: new, Year of construction: 2023, mandrel bending machine ZB 55 H - mandrel length 2000 mm - pipe bender for tubes and profiles up to 54 mm Bwolqzsd H Rhisa Rxjl - solid construction for heavy using standard equipment: - modern electromecanic movement - SPS control unit - up to 1000 different programs - electronic measurement of length and angle - manual stop system - hydraulic tube clamping - adjustable hydraulic pressure - three jaw chuck - total power 5,2 KW - bending speed 28 degrees per second - min. bending radius 50 mm, max. bending radius 150 mm - minimum tube diameter 15 mm - 400 Volt 50 Hz 3 ph. - weight 900 kg HS-Code: 8462 2998

Year of construction: 1991, Condition: used, machine/vehicle number: 9198590, Technical data: -Drilling capacity 60 mm -Throat depth 1600 mm -Spindle mount Mt 5 -Spindle hub 390 mm -Spindle speeds, 20 levels 20-2000 RPM -Right rotation -Feed, 12 steps 0.056 2.5 mm/U - drive 400 V / 12.8 kW -Clamp the boom and electromechanical drill unit -Was wrought bed - boring Quill - min approx. 900 mm -max 1600 mm -usable machine bed with 4 T-slots 950 x 1700 mm Bwjlqjdhkhtoza Rxel -Coolant system -Cube table - space requirement approx. B 2600 x H 3000 x T 1000 mm - weight approx. 4500 kg

Condition: good (used), linear drive, linear gear, lifting gear, spindle drive, linear axis, toothed belt axis Bwolqzasud Urro Rxol -Manufacturer: Festo, linear drive type DGE-25-1500-ZR-LK-RH-KF-GK -Stroke length: 1500 mm -Servo motor: Festo type EMMS-AS-55-M-LS-TM -Planetary gear: Neugart PLE 80 -Quantity: 5 pieces available -Price: per piece -Dimensions: 1880/70/H340 mm -Weight: 12.7 kg/piece

Condition: good (used), Your contact persons in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch Mr.: Simon Blank Included in delivery are: 01x railing post, II. choice Material color: Ral 7001 silver gray Manufacturer: SSI Schäfer Total height: approx. 1.030mm Profile: 55 x 30 x 2,0 mm (D x W x S) Base plate: 120 x 80 x 15 (W x D x H) Bwelqza Rehm Ey Hsxol Diameter round tube opening: approx. 35 mm Distance center-center-hole: approx. 315 mm Weight pcs: approx. 3,37 Kg Notes: - The railing post is open when viewed from above. If desired, you can get matching plastic caps. - The heights of the round tube openings are: 345, 660 and 975 mm ( Measured from the lower edge of the base plate to the lower edge of the round tube opening ) - suitable for round tubes with a diameter of 34-35 mm - For mounting we recommend 4 screws M8 (8.8er) - Slip-through opening must not be larger than 900 mm. - If the railing posts are drilled through a beam ( CS, C or IPE ), then no counter plate is necessary General information about the article: This item is offered for pickup only. Any transport or shipment of this item desired beyond this is associated with additional costs, which can be requested separately from us depending on the delivery location or scope of delivery. Our services at a glance: (prices on request) Assembly, erection our general assembly conditions are to be considered Rack inspection Rack inspection according to DIN EN 15635 executed according to

Condition: used, Year of construction: 2019, operating hours: 35 h, power: 37 kW (50.31 HP), Equipment: cabin, As good as new small tractor for sale. Snow blade can be purchased separately. Machine has never had salt used. Bjlqza Rovxyxfoxjwl

Condition: good (used), Offer 23477 Hydr. flat profile and bar steel shears and hole punch Technical data: - Flat steel shears cut up to 350 x 12 mm Bwslqzajra Avdo Rxsl - Steel section shears - cuts L-steel 90° up to 100 x 10 mm - Steel bar shears - cuts round steel up to 32 mm - Notching device - Rectangular notcher 50 x 90 mm - Hole punch - punching force 550 KN - with stop table - throat depth 220 mm - punches holes in steel up to 32 Ø in 12 mm - Coordinate table - manual stop - E. foot switch - Drive 400 V / 2.2 kW - Space requirement approx. W 900 x H 1750 x D 1700 mm - Weight approx. 1200 kg

Year of construction: 2012, Condition: good (used), Generator, emergency power generator, generator, aggregate, power generator, power generator, emergency power generator, generator set -Manufacturer: SAB, generator set type D-4107 F -previous use: ship -Power: 44/55 kW/kVA 50 Hz -Engine: Deutz type BF 4M 2012 60 kW -Generator: Marelli type MJB 200 MA 4 -Remark: without control, without cooling Bwslqza Reh I Ez Djxjl -Individual components: see photos -Dimensions: 1630/710/H1060 mm -Total weight: 840 kg

Condition: used, Double end tenoner, edge processing machine, scoring motor, chipper motor, electric motor, spindle motor, milling motor Bwolqzajb A Nm Ue Rxsl -1x motor: 0.3 kW 18000 rpm at 300 Hz -Voltage: 165 V -Recording diameter: 16 mm -Number: 12x motors available -Price: per piece -Weight: 3 kg/piece

Year of construction: 1995, Condition: used, strapping machine, packaging machine, strapping machine, skinpack machine, wrapping machine, winding machine, drive unit for stretch wrapping machine -Manufacturer: Waldys, drive unit for stretch wrapping machine model 55 Bwolqza Rju Huuboxsl -Motor: 4 kW / 80 - 16 rpm -Individual components: see photos -Dimensions: 640/570/H680 mm -Weight: 120 kg

Condition: used, Basic - feed-in unit, feed-in module, converter, frequency converter, frequency converter, drive converter, controller, variable speed drive -Manufacturer: Baumüller, servo power unit BUS624-38/55-54-0-000 -Built-in control device: Controller BUS 6E -Type: BUS6-E-SM-0012-A011-0000 Bwjlqjh R D Rpoza Rxel -Number: 3x devices available -Price: per piece -Dimensions: 300/165/H380 mm -Weight: 11.9 kg/piece