Used Floorpul Ruby 50 for sale (82,936)

Condition: good (used), Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams, swivel cylinders Cgsbsv Ni Nhe Ha El Uot -Manufacturer: Orsta, double-acting hydraulic cylinder stroke 630 mm -Type: B1-50/32x630/0 TGL10906 -Piston rod: Ø 32 mm -Dimensions: 805/115/H115 mm -Weight: 13.4 kg

Condition: used, Year of construction: 2007, operating hours: 3,573 h, load capacity: 1,500 kg, lifting height: 4,660 mm, free lift: 1,470 mm, mast type: triplex, power: 4 kW (5.44 HP), fork carriage width: 980 mm, ground clearance: 80 mm, front tire type: V: Solideal, H: Trelleborg, front tire size: 18x7-8, rear tire type: V: Solideal, H: Trelleborg, rear tire size: 18x7-8, total length: 2,950 mm, wheelbase: 1,200 mm, drive type: Elektro, construction width: 1,300 mm, net weight: 2,217 kg, Electric forklift Cob Ha Ejv R Hq Eol Uegt Still RX 50-15 Drive Electric Year built 2007 Lifting height (mm) 4,660 Lifting weight (kg) 1,500

Condition: used, machine/vehicle number: 06.910, input voltage: 220 V, power: 29 kW (39.43 HP), overall weight: 150 kg, total length: 800 mm, total width: 800 mm, tank capacity: 50 l, Gas sauté pan All-stainless steel construction Electric ignition Electric pan tilting Cgeb Howb Emrja El Ujt The burner rail was replaced in 2020

Condition: reconditioned (used), Year of construction: 2005, operating hours: 30,408 h, Functionality: fully functional, pressing force: 50 t, bale weight: 550 kg, filling opening width: 1,100 mm, filling opening length: 1,250 mm, bale height: 720 mm, bale width: 1,100 mm, overall weight: 16,000 kg, oil tank capacity: 600 l, year of last overhaul: 2024, Technical data baler: Manufacturer Presona AB Type LP 50 EH1 Year of construction 2005 Operating hours 30,408 hours, as of April Number of pressed bales 198,059 as of April Pressing force main press 50 tonnes Specific pressing force 63 N/cm² Theoretical throughput capacity 530 m³/hour Throughput capacity under operating conditions 260 m³/hour Dimensions of feed chute 1,250 x 1,100 mm Bale chamber volume 2.2 m³ Bale dimensions 1,100 x 720 mm, variable length Drive power 22 kW Tying 5-fold vertical, fully automatic Throughput rates with a bulk density of 30 kg/cbm 6 up to 7 tonnes/hour Bulk weight of 50 kg/cbm 7 up to 9 tonnes/hour Bulk weight of 100 kg/cbm 11 up to 14 tonnes/hour Bale density (paper/newspapers) 400 to 550 kg/m³ Hydraulic oil tank capacity 600 litres PLC control Telemecanique TSX Micro Schneider Magelis control panel Effective transport dimensions excl. baler 8,125 x 2,300 x 3,000 mm (L x W x H) Transport weight press approx. 16 tonnes Condition of the baler: The machine was partially overhauled in our workshop and general maintenance work was carried out. After completion of the overhaul work, the press was tested during operation and is available for sale at short notice. Cjb Haeu Thhro El Ujgt Scope of delivery: Only the baler will be sold. The documentation (Manual, CE-declaration, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: like new (used), Year of construction: 2020, operating hours: 5,000 h, travel distance X-axis: 500 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 400 mm, Machine details Stock-No. 1105-04021 Type of machine Machining Center - Universal Make DECKEL MAHO DMG Type CMX 50 U 5-axis Year of manufacture 2020 Type of control CNC Storage location HAGUENAU FRANCE Country of origin Germany Delivery time immediately Freight basis EX WORK Technical details x-travel 500 mm y-travel 450 mm z-travel 400 mm control HEIDENHAIN TNC 620 tool adaptor SK 40 turning speeds 12000 1/min table surface area 500 X 380 MM mm tool change unit 60 pos. total power requirement 40 KVA 63 A protection Additional information CONTROL HEIDENHAIN ITNC 620 NC round-swivelling table, coolant device,TOOLS PROBE PARTS PROBE Ceb Haot Eqxfs El Usgt COOLANT TROUGHT THE SPINDLE cabin,

Condition: like new (used), Year of construction: 1999, AMADA MODEL ITS2 50-20 50 TONS X 2000 HYDRAULIC UP STROKING 5 AXIS CNC PRESS BRAKE COMPLETE WITH OPERATEUR 1 5 AXIS CNC CONTROL Erwin Sick machine mounted electronic guards , side and rear interlocked fencing year 1999 stock no. 01917 description TYPE HYDRAULIC UPSTROKING BENDING PRESSURE 50 TONS BENDING LENGTH 2000 Cgsb Hepygydja El Ust OPEN HEIGHT 370 STROKE LENGTH 100 THROAT DEPTH 400 TABLE WIDTH 60 NO. OF AXIS 5 AXIS CONFIGURATIONS X1-X YI-Y2 RI-R2 BACKGUAGE can be demonstrated under power BROCHURE AND FURTHER INFORATION AVAILABLE UPON REQUEST

Condition: good (used), Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams, swivel cylinders -Manufacturer: Orsta, double-acting hydraulic cylinder stroke 125 mm -Type: B2-50/32x125 TGL10906 -Piston rod: Ø 32 mm / M18 Cgob Ha Esv Nh Ehsl Ust -Holes: Ø 30 mm -Dimensions: Ø 80 x 375 mm -Weight: 6.3 kg

Condition: excellent (used), Year of construction: 2019, Functionality: fully functional, Dixi 50 S vertical baler, year of manufacture 2019 Technical data Cgeb Ha Esv Niytsl Uet Manufacturer: Maschinenfabrik Bermatingen Type: Dixi 50 S Year of construction: 2019 Drive power: 7.5 kW Pressing force: 50 t Pressing time: 23 s Filling opening: 1200 x 620 mm Filling height: 1000 mm Bale size: 1200 x 800 x 830 mm Bale weight: 300-350 kg Tying: manual Transport dimensions: 1800 x 2000 x 2300 mm Weight: 2300 kg Materials: PET bottles, HDPE/LDPE/PP, hollow bodies, big bags, textiles, foil, polystyrene, fleece, glass wool, etc. The operating instructions and EC Declaration of Conformity are available in German. Remark: The machine is in very good condition. It was checked and tested by us in 28816 Stuhr. The video can be found above with the pictures, or on our website or our Youtube channel. Viewings, also under power, are possible at any time by appointment. On request, we can also carry out tests with your equipment for a fee. We are also happy to answer questions about the machine by telephone from Monday to Thursday from 08:00 to 14:00. On Friday we are there for you from 08.00 to 13.00 h. Please note: All technical data refer to the manufacturer's specifications. We accept no liability for the information provided or for any errors. The offers are non-binding, subject to prior sale and revocable at any time. Viewings are possible by arrangement. The sale is ex works, without guarantee or warranty.

Condition: good (used), Year of construction: 2003, operating hours: 44,645 h, travel distance X-axis: 2,000 mm, travel distance Y-axis: 1,150 mm, travel distance Z-axis: 585 mm, controller model: Mazatrol PC Fusion 640 M, workpiece weight (max.): 4,000 kg, table width: 1,000 mm, table length: 2,240 mm, table load: 4,000 kg, overall weight: 25,000 kg, spindle speed (max.): 6,000 rpm, operating hours of spindle: 44,645 h, distance table to spindle center: 780 mm, spindle motor power: 3,000 W, spindle nose: BT50, number of spindles: 1, number of slots in tool magazine: 60, input voltage: 400 V, Equipment: chip conveyor, documentation/manual, This MAZAK FJV-50/80 is currently still operational at our customer in Germany and can be viewed working on location if seriously interested. Csbjv Izffs Ha El Usgt The machine is available in consultation... Furthermore, the machine is in super neat condition as can be seen in the photos! Additional specifications: Workpiece weight max. 4000 k Distance between columns: 1230mm Total weight: 25000 kg Machine dimensions; 11500×4200×3750 (LxWxH)

Condition: excellent (used), Year of construction: 2023, operating hours: 1,851 h, Functionality: fully functional, pressing force: 70 t, bale weight: 500 kg, filling opening width: 1,100 mm, filling opening length: 1,400 mm, bale height: 750 mm, bale width: 1,100 mm, overall weight: 17,000 kg, oil tank capacity: 70 l, Technical data baler: Manufacturer Avermann Maschinenfabrik GmbH & Co. KG, Germany Type AVOS 1410 BS-22/50 Year of construction 2023 Pump operation hours 1,851 hours, as of July 24 Press power main press 70 t (a 70 tonne hydraulic cylinder is installed, special equipment) Specific press force 90,9 N/cm² (a 70 tonne hydraulic cylinder is installed, special equipment) Feed channel 1,400 x 1,000 mm Theoretic cycle time 13 sec Theoretic throughput capacity 266 m³/h Bale size 1,100 x 750 (w x h), the length is variable Drive power 22 kW Connected load 65 kW Tying system 4-fold, vertical, fully automatic Throughput capacity at a bulk weight of 30 kg/cbm approx. 5,5 t/h bulk weight of 50 kg/cbm approx. 7,5 t/h bulk weight of 100 kg/cbm approx. 9,7 t/h Bale weight with a bale length of approx. 1.2 m up to 500 kg, depends on material SPS controller Siemens S7-1500 Operating panel Schneider Harmony Baler dimensions built up 8,610 x 2,400 x 3,835 mm (l x w x h) Transport weight baler approx. 17 t Special equipment: Cgsb Hsu Thbxja El Uot Wear-resistant floor made of HARDOX steel Larger main hydraulic cylinder with 70 tonnes of pressing force Special press ram for pressing loose bulk materials with small grain sizes OptiCut XS system for lower cutting forces and higher throughput rates Special pressing piston for pressing "difficult" materials Technical data for the conveyor belt: Manufacturer Avermann Maschinenfabrik GmbH & Co. KG, Deutschland Type KGF GB 1500 Year of construction 2023 Drive power 4.0 kW Belt speed approx. 0.3 m/second Length feeding conveyor 2,679 mm Length elevating conveyor 6,866 mm Length goose neck 1,272 mm Grade 35° Effecting width 1,400 mm Side wall height 800 mm Carrier height 50 mm Carrier distance 750 mm Belt quality EP 400/3, 3:1 (DIN quality N) Overall height 4,515 mm Overall transport dimensions11,148 x 2,502 mm (l x w) Technical data on the non-contact personal protection system: Manufacturer BOREMA Umwelttechnik AG, Switzerland Type APSS iBOR 22 Year of construction 2023 Condition of the press system: The entire system is in very good condition due to the short operating time of only 1,851 pump hours and the processing of only paper, cardboard and film. Scope of delivery: Avermann baler, type AVOS 1410 BS-22/50, incl. wire drawing stations and bale chute Avermann conveyor belt, type KGF GB 1500 BOREMA personal protection system, type APSS iBOR 22 Comments: The documentation (Manual, CE-declaration, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Year of construction: 2000, Condition: good (used), Machine-Details Stock-No. 1105-03848 Type of machine Machining Center - Vertical Make DMG DECKEL MAHO GILDEMEISTER Type DMU50 evolution Cgsb Ha Elok N Ddqs Uot Year of manufacture 2000 Type of control CNC Storage location ab Standort Country of origin Germany Delivery time nach Absprache Freight basis ab Standort,frei verladen Technical details x-travel 500 mm y-travel 380 mm z-travel 380 mm turning speeds 20 - 18 000 U/min spindle taper ISO SK 40 DIN 69871 control Heidenhain MILL PLUS rapid travel x/y/z 30 000 mm/min surface area 500 x 380 mm number of T-slots 7 Stück max. tool length from spindle nose 280 mm weight of the machine ca. 6 t total power requirement 36 kVA Additional information 3 axis B-axis, C-axis control Heidenhain MILL PLUS magazine places: 32, space requirements with swarf conveyor: about L:3,0:W:2,53xH:3,15m Machine still is placed at the customer and can be viewed under working

Year of construction: 1997, Condition: excellent (used), main engine 11 kW disc diameter max. 500mm cutting height max. 160mm Cgebsi Dbvmj Ha El Uet cutting width 5 - 160 mm ruler with guide rollers feed speed adjustable on a gear motor machine dimensions (length/width/height) 170 x 130 x 130 cm weight ~ 500 kg

Condition: good (used), Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams, swivel cylinders, lifting power jacks -Manufacturer: Bosch, double-acting hydraulic cylinder, stroke 200 mm -Type: HY/CUM 50/200 B1 -Piston rod: Ø 25 mm -Holes: Ø 20 mm / Distance: retracted 455 mm Cgobev I S Svs Ha El Uet -Dimensions: 495/70/H110 mm -Weight: 6.9 kg

Condition: excellent (used), Year of construction: 2019, Functionality: fully functional, Vertical baler Dixi 50 S, year of manufacture 2019, very good condition technical data Manufacturer: Maschinenfabrik Bermatingen Type: Dixi 50 S Year of construction: 2019 Drive power: 7.5 kW Pressing force: 50 t Pressing time: 23 s Filling opening: 1200 x 620 mm Filling height: 1000 mm Bale size: 1200 x 800 x 830 mm Bale weight: 300-350 kg Tying: manual Transport dimensions: 1800 x 2000 x 2300 mm Weight: 2300 kg Materials: PET bottles, HDPE/LDPE/PP, hollow bodies, big bags, textiles, foil, polystyrene, fleece, glass wool, etc. The operating instructions and EC Declaration of Conformity are available in German. Remark: The machine is in very good condition. It was checked and tested by us in 28816 Stuhr. The video can be found above with the pictures, or on our website or our Youtube channel. Viewings, also under power, are possible at any time by appointment. On request, we can also carry out tests with your equipment for a fee. Cgsb Hev Nixpsa El Ust We are also happy to answer questions about the machine by telephone from Monday to Thursday from 08:00 to 14:00. On Friday we are there for you from 08.00 to 13.00 h. Please note: All technical data refer to the manufacturer's specifications. We accept no liability for the information provided or for any errors. The offers are non-binding, subject to prior sale and revocable at any time. Viewings are possible by arrangement. The sale is ex works, without guarantee or warranty.

Condition: new, Year of construction: 2023, operating hours: 27 h, load capacity: 4,990 kg, lifting height: 6,060 mm, free lift: 1,920 mm, mast type: triplex, power: 22 kW (29.91 HP), fork carriage width: 1,300 mm, ground clearance: 90 mm, front tire type: V= Continental, H= Trelleborg, front tire size: 355/50-15, rear tire type: V= Continental, H= Trelleborg, rear tire size: 21x8-9, total length: 4,550 mm, wheelbase: 2,030 mm, drive type: Elektro, construction width: 1,400 mm, net weight: 5,714 kg, - Bedienung Sitzgerät - Lastabstand mm 525 mm - Achslast mit Last vorn/hinten kg 11475/1283 - Achslast ohne Last vorn/hinten kg 3814/3954 - Bereifung Superelastik - Spurweite vorn/hinten mm 1104/932 - Neigung Hubgerüst vorwärts/rückwärts α/β ° 7/5 - Sitzhöhe bezogen auf SIP (niedrige Variante) mm 1342 - Arbeitsgangbreite bei Palette 1000 x 1200 quer mm 4370 - Arbeitsgangbreite bei Palette 800 x 1200 längs mm 4570 - Wenderadius 2645 mm - Kleinster Drehpunktabstand 729 mm - Fahrgeschwindigkeit mit Last km/h 20 - Fahrgeschwindigkeit ohne Last km/h 20 - Hubgeschwindigkeit (Plus*//Standard-Performance) mit Last 0,39/0,31 - Hubgeschwindigkeit ohne Last m/s 0,45 Cjbevfgypj Ha El Usgt - Senkgeschwindigkeit mit Last m/s 0,5 - Senkgeschwindigkeit ohne Last m/s 0,5 - Zugkraft mit Last N 6750 - Zugkraft ohne Last N 7430 - Max. Zugkraft (Plus//Standard-Performance) mit Last N 22590/19000 - Max. Zugkraft (Plus//Standard-Performance) ohne Last N 22560/19090 - Steigfähigkeit mit Last % 8,9 - Steigfähigkeit ohne Last % 15,5 - Max. Steigfähigkeit (Plus//Standard-Performance) mit Last % 20,4/13,8 - Max. Steigfähigkeit (Plus//Standard-Performance) ohne Last % 27,5/27,5 - Beschleunigungszeit 15 m (Plus//Standard-Performance) mit Last s 6,3/7,4 - Beschleunigungszeit 15 m (Plus//Standard-Performance) ohne Last s 5,7/6,2 - Betriebsbremse Hydraulisch betätigte Lamellenbremse - Batteriespannung V 80 - Umschlagleistung (Plus//Standard-Performance) t/h 324/315 - Arbeitsdruck für Anbaugeräte bar 250 - Ölstrom für Anbaugeräte l 50 - Schalldruckpegel (Fahrerplatz) dB(A) 66 - Humanschwingung: Beschleunigung nach EN 13059 m/s2 0,42 - Anhängerkupplung, Art Bolzen

Condition: used, Year of construction: 2008, Delivery Heidelberg-Stahlfolder TSH-50 Csb Hjulh Svea El Usgt Year: 2008 - Vertical stack delivery with pressing - SPA Twin Lateral Pack Output

Condition: used, Year of construction: 2007, operating hours: 18,600 h, Liebherr LTM 1090 - 4.1 8x8 / 90 tons Accident-FREE PERFECT CONDITION! ? YEAR OF PRODUCTION: 2007 ? MILAGE: 50 500 km ? WORKING HOURS: 18 600 MAX HEIGHT: 50 m (please check pictures of diagrams with all details) TOTAL WEIGHT: 48 000 kg OPERATIONAL MASS: 90 000 kg TEL: * KUBA - POLSKI, ENGLISH, DEUTSCH, ITALIANO Cebewcvnie Ha El Uogt * SEBASTIAN - POLSKI, DEUTSCH, ITALIANO, ????? * LASZLO - MAGYAR * COSTEL - ROMÂN? (Romana facem toate formalitatile pt export inclusiv nr)

Condition: used, Solid drill - SK 50 tool holders with coolant ring , four drilling tools = 1 x approx. 50 mm ..... .....L approx. 200 mm 1 x KOMET KUB 2 / 2 / 58 approx. 60 mm .....L approx. 170 mm Cgsb Ha Eev Rlucsl Uot 1 x approx. 70 mm.....L approx. 170 mm 1 x approx. 75 mm.....L approx. 210 mm

Condition: good (used), Fan head, chamber ventilator, dorade ventilator, mushroom ventilator, ship ventilator, deck ventilator, ventilation, mushroom hood for ventilation, ventilation duct, ventilation flap, ventilation system, extraction system, ventilation ducts and fittings, multi-leaf damper, non-return damper, lamellar ventilator, mushroom hood -Manufacturer: WMW, fan head type MTK DN 50 GL 37081-86 HH Cob Ha Eeirax Ael Ujgt -Flange: DIN 2576 ND10-NW50/60 -Bolt circle Ø 126 x 18 mm -Number: 6x hood available -Price per piece -Total dimensions: 230/165/H225 mm -Weight: 6.5 kg/pc.

Condition: excellent (used), Year of construction: 2020, Functionality: fully functional, Vertical baler Dixi 50 S, year of manufacture 2020, very good condition Technical specifications Manufacturer: Maschinenfabrik Bermatingen Cgebov Niw Se Ha El Uot Type: Dixi 50 S PET Year of construction: 2020 Drive power: 7.5 kW Pressing force: 50 t Pressing time: 23 s Filling opening: 1200 x 620 mm Filling height: 1000 mm Bale size: 1200 x 800 x 830 mm Bale weight: 300-350 kg Tying: manual Transport dimensions: 1800 x 2000 x 2300 mm Weight: 2300 kg Materials: PET bottles, HDPE/LDPE/PP, hollow bodies, big bags, textiles, foil, polystyrene, fleece, glass wool, etc. The operating instructions and EC Declaration of Conformity are available in German. Remark: The machine is in very good, as-new condition. The seals on the 2 cylinders for the retaining clamps have been replaced. It was checked and tested by us in 28816 Stuhr. The video can be found above with the pictures, or on our website or our Youtube channel. Viewings, also under power, are possible at any time by appointment. On request, we can also carry out tests with your equipment for a fee. We are also happy to answer questions about the machine by telephone from Monday to Thursday from 08:00 to 14:00. On Friday we are there for you from 08.00 to 13.00 h. Please note: All technical data refer to the manufacturer's specifications. We accept no liability for the information provided or for any errors. The offers are non-binding, subject to prior sale and revocable at any time. Viewings are possible by arrangement. The sale is ex works, without guarantee or warranty.

Condition: new, Aircraft AIRSTAR 503/50 SAR piston compressor Mobile piston compressors with belt drive. High-quality equipment and attached hose reel. TECHNICAL DATA Dimensions and weights Length (product) approx. 860mm Width/depth (product) approx. 500mm Height (product) approx. 880mm Weight (net) approx. 68.2kg Electrical data Supply voltage 400V Mains frequency 50Hz Output power 3kW Csb Hast Ifgij El Ujgt Input power 3.67kW Noise emission Sound power level Lw94dB(A) Explanation Sound power level Sound power level according to DIN EN ISO 3744 (Directive 2000/14/EC) Compressor Compressor system HOS Suction capacity approx. 510l/min Filling capacity approx. 400l/min Explanation Filling capacity at 6 bar working pressure Number of cylinders 2 Number of compression stages1 Compressor speed 1310min¯¹ Compressed air tank Maximum pressure 10bar Tank capacity 50l SCOPE OF DELIVERY Hose reel SAR 8/10 RP Hose length 10 m Hose inner diameter 8 mm EQUIPMENT Pressure control Quality filter pressure regulator Automatic pressure switch CONDOR Drive transmission V-belt Compressed air line material Flexible Armored hose line with heat protection Compressed air preparation Filter pressure regulator Compressed air tapping A composite safety coupling Condensate drain Condensate drain valve Compressed air tank Powder-coated with ten-year guarantee against rusting through ZÜS tested Inspection before commissioning also possible by a qualified person Container base Two wheels with PU foam tires, two swivel castors with parking brake

Condition: used, Year of construction: 2008, Delivery Cgob Ha Eeiyrfgol Ujt Heidelberg-Stahlfolder TSH-50 Year: 2008 - Vertical stack delivery with pressing - SPA Twin Lateral Pack Output

Condition: excellent (used), Year of construction: 2015, Functionality: fully functional, Baler Paal Pacomat II-50 C, built in 2015 Technical data: Manufacturer Paal Type Pacomat II-50 C Cgeb Ha Elov Nh N Ts Uot Year of manufacture 2015 Pressing force 50 t Drive power 45 kW Filling opening 1200 x 620 mm Bale dimensions 700 x 1000 mm, length variable 4-fold automatic binding Throughput at 35 kg/m³ approx. 6.7 t/h 60 kg/m³ approx. 10.6 t/h Bale weight up to 500 kg Transport dimensions approx. 7300 x 2000 x 2500 mm (LxWxH) Machine weight approx. 8500 t Materials: paper, cardboard, film The press is in good condition and was only used for waste paper / punching residues. It was checked and tested by us in 28816 Stuhr. You can find the video above with the pictures, or on our website or our YouTube channel. The complete documentation including the CE declaration, electrical circuit diagram and hydraulic diagram is available in German. Please note: All technical data refers to information provided by the manufacturer. We accept no liability for the information provided or any errors. The offer is subject to change, subject to prior sale and revocable at any time. Viewings are possible by arrangement. The sale against advance payment takes place ex works, without warranty or guarantee.

Condition: good (used), Year of construction: 2009, Functionality: fully functional, Presona LP 50 VH1 baler, built in 2009, 50 t capacity, including perforator Technical specifications: Manufacturer: Presona Sweden Type: LP 50 VH1 Year of manufacture: 2009 Press capacity: 50 t Drive: 22 kW Throughput at a bulk density of 30 kg/m³: 6-7 t/h 50 kg/m³: 7-9 t/h 100 kg/m³: 11-14 t/h Filling opening: 1500 x 1100 mm Bale size: 1100 x 720 mm Volume weight: approx. 400-550 kg/m³ Csb Haov Nhz Nj El Uegt Baling: 5-fold Transport dimensions: approx. 8800 x 2200 x 2400 mm (LxWxH) Weight: approx. 18,000 kg Materials: Paper, cardboard, film, PET Accessories: Perforator The operating instructions and EC Declaration of Conformity are available in English. Note: The machine is in good condition. It was inspected and tested by us in 28816 Stuhr, Germany. The video can be found above in the pictures, or on our website or YouTube channel. The press has been overhauled. The following work was performed: Base replaced with Hardox plates Plastic slide rails replaced Press carriage rollers replaced Inspections, including live inspections, are possible at any time by appointment. Upon request, we can also conduct tests with your material for a fee. We are happy to answer any questions you may have about the machine by phone from Monday to Thursday from 8:00 a.m. to 2:00 p.m. On Fridays, we are available from 8:00 a.m. to 1:00 p.m. Please note: All technical data refers to the manufacturer's specifications. We assume no liability for the information provided or for any errors. This offer is subject to change without notice, prior sale, and cancellation at any time. Viewings are possible by appointment. Sales are subject to advance payment and are ex works, without warranty or guarantee.

Condition: good (used), Year of construction: 2015, operating hours: 1,932 h, Functionality: fully functional, Presto CC 50 M baler, semi-automatic, year of manufacture 2015, pressing force 50 t, with lift-tilt device Technical specifications: Manufacturer: Presto Type: CC 50 M Year of construction: 2015 Operating hours: 1932 Pressing force: 50 t Cycle time: 52 s Drive power: 7.5 kW Filling opening: 1030 x 1100 mm Filling volume: 0.85 m³ Tying: 3-fold, wire, manual Throughput capacity with bulk density of 35 kg/m³ - 1.3 t 60 kg/m³ - 1.7 t 100 kg/m³ - 2.2 t Bale dimensions: 750 x 1100 mm Bale weight: 300 kg Dimensions: 4705 x 1680 x 2540 mm (LxWxH) Machine weight: approx. 4000 kg Materials: paper, cardboard, film The operating instructions are available in German. Cjb Haov Nhv Tj El Ujgt Remark: The machine is in good condition. It was checked and tested by us in 28816 Stuhr. You can find the video above with the pictures, or on our website or our Youtube channel. Viewings, also under power, are possible at any time by appointment. On request, we can also carry out tests with your equipment for a fee. We are also happy to answer questions about the machine by telephone from Monday to Thursday from 08:00 to 14:00. On Friday we are there for you from 08.00 to 13.00. Please note: All technical data refer to the manufacturer's specifications. We accept no liability for the information provided or for any errors. The offer is non-binding, subject to prior sale and revocable at any time. Viewings are possible by arrangement. The sale against prepayment is ex works, without warranty and guarantee.