Used Atlas-Copco Qas 24 for sale (27,157)

Year of construction: 2018, Condition: excellent (used), ATLAS COPCO GX 2 screw compressor on a 250 l pressure tank 2.2 kw engine Capacity 0.25 m3/min Cgjln Twqep Ebv Iebst Pressure 10 bar Mileage 5519 hours THE COMPRESSOR IS FULLY FUNCTIONAL

Condition: new, volume flow: 1,994 m³/h, noise level: 67 dB, type of cooling: air, pressure: 10 bar, type of input current: three-phase, tank capacity: 500 l, Equipment: documentation/manual, Atlas Copco G15FF screw compressor, brand NEW! Specification: Coln Teq E Iraowqbsgt • capacity at 7.5 bar 1994 l/min • capacity at 10 bar 1740 l/min • main engine power 15.0 kW • 500 l tank • maximum operating pressure 10.0 atm • built-in refrigerant dryer • electronic setting of compressor operating parameters • soundproof cabin (only 67 dB) Additional information: • the photos shown show the actual condition of the item for sale • possibility of switching on and checking the device on site. • meets CE standards • operating instructions in Polish and a complete set of documents for UDT • possibility of obtaining a manufacturer's warranty • available immediately or within 7 working days

Condition: excellent (used), Year of construction: 2000, machine/vehicle number: AII 471146, GA 75 screw compressor Maximum operating pressure: 10 bar Cgolot Du Sysn Twqbjt Compressed air production: 192 l/s Power: 75kW Speed: 3000 r/min Weight: 1550kg

Condition: good (used), Functionality: fully functional, power: 87 kW (118.29 HP), fuel type: diesel, fuel tank capacity: 80 l, overall weight: 8,350 kg, Year of construction: 2011, operating hours: 6,000 h, machine/vehicle number: CRG108371810-1, Equipment: crane, gripper hydraulics, hydraulics, rubber tracks, Atlas Copco drilling rig MUSTANG 4 - F1 Composed by: DRILL MAST BMI 3.9 HD - New roller type incl. chain feed, hyd. feed motor with gear reducer and neg. brake, Force on the Feed beam 85 kN Feed and retract force on Rotation Head 47 kN Feed length ..... 3900 mm Total length..... 5650 mm Feed rate speed..... 26m/min HOSE REEL. FOR FEED BEAM 3.9 and 3,9HD for guiding hyd. hoses to power head. OFF-HOLE SHIFT, hyd. operated, allows rotation head to move laterally 270 mm SERVICE CONTROL PANEL with valves laterally mounted DRILLING CONTROLS mounted on flexible arm SILENCED POWER UNIT with 2 hydraulic pumps A10V+A10V, Engine Deutz D 914 L06 2V step III, air cooled diesel engine rated 86,5 kW, 2300 rpm, 24V El. and safety system, oil tank 180l, filling pump, filter unit , fuel tank 80l and piping. Electrical oil cooler incorporated. MAST ATTACHMENT with hydraulic elevating device (double cylinder) and clamp for drill mast. ATTACHMENT for FEED HD type with 500 mm feed advance cylinder CRAWLER, U-F25-1-67 (7 rollers) hydraulically driven, with Rubber pads, Ground clearence 310mm Track width: 300 mm Cgeln Twsuwfnaeqbot Track length: 2570 mm Crawler width: 1950 mm / Rig width 1950 mm Weight: 1050 kg crawler / 6300 kg rig Max inclination: 30° Max speed: 2,2 km/h Max totally traction force: 66,1 kN HYDRAULIC JACKS Set of four. stroke 4x 450 mm in rear and front elephant foots incl. EMERGENCY STOP DEVICE Always included in basic unit. ASSEMBLY KIT ROT.HEAD DHR48H56-68 Note: rotary head is not incl. in kit ROTARY HEAD DHR48H68-3 Rotation motors 2xOMSS250 Gear ratio : 4,31 :1 , Including floating sub 2 3/8 API Reg box SELECTOR VALVE KIT serial/parallell mode ROT. HEAD DHR48H68 given Serial mode rot.: 0-80 RPM - Torque 2850Nm Serial mode rot.: 0-40 RPM - Torque 5700Nm Figures at 90 l/min and 175 Bar HYD. ROD HOLDER AND BREAKER Incl. plate jaws. Free opening 250 mm. (Extend feed 360mm) Gripping force 88,25 kN (19,730 lbf.) at 180bar Breaking torque 23,8 kNm (5,400 lbf.) at 180 bar HYD OPERATED DIVERTER HEAD DHR48, basic kit including cutting collector head, attachment and two hyd cylinder Guides and seals for ODEX strings not included, To be specified and ordered separately GASKET DIVERTER HEAD tube 89mm GUIDE KIT Diverter head for casings 178mm 7 , MAIN HOIST with short crown block Hydraulically driven hoist HP6/E FH, with disc brake.Hydraulic shut-off device for minimum rope capacity. Steel wire 10mm, L=30m. Lifting hook. Short crown block Lebam type, to handle tubes in drill center. Max. pull capacity 1st layer :10,0 kN Max. lifting speed 1st layer :38m/min HOLD BACK DEVICE new type DTH HAMMER FOG LUBRICATOR LUBROSTAR type incl. high pressure air hose to swivel. Max. 30 bar operating pressure. Lubrication oil tank holds 10 litres. FOAM-WATER PUMP max flow 30 l/min Max delivery pressure 25 bar. RIG CLEANING DEVICE spray gun kit to be used in conjunction with foam water pump SWIVEL 4.5-SI for mud drill activities BELLIN PUMP type NG1200- L2PC max flow 660l/min at max 25 bar - rotor and stator fault WANGEN mud pump with helical rotor, 470 L/min, 25 bar - rotor and stator fault TILTABLE PIPE RACK 40PCS x 76mm x 3 tubes 7 BAR AIR OUTLET for grinder HYDRAULIC OUTLET FOR WELDER HYDRAULIC WELDING UNIT HWG 200-30 defective ROUND JAWS SET FOR CASING OD 178 mm HOLD BACK PRESSURE SYSTEM drill pipe and accessories are sold separately

Condition: used, Functionality: fully functional, Manufacturer: Atlas Copco Cjlnouh N S Io Twqbsgt Type: ZT132VSD-FF Power: 132kW/50Hz Max. pressure: 8.6 bar Air delivery: 19.5 m³/min Operating hours: 71 979 h Dimensions: 4040mm L x 1650 W x 2000 H Net weight: 3700 kg

Condition: used, Atlas Copco GA 410 Cgolnorw H Das Twqbet

Year of construction: 1995, Condition: used, machine/vehicle number: AII 318838, SECOND-HAND SCREW COMPRESSOR ATLAS COPCO GA37 KW 7,5 13 BAR - CE RULES - SN AII 318838 Csljr Ilrlsn Twqbjgt - Year 1995

Condition: new, Atlas Copco G7FF 500 lt screw compressor NEW Specification: • condition - new • manufacturer - Atlas Copco • capacity - 984 l/min Coln Twehkttpoqbjgt • main engine power - 7.5 kW • tank - 500 l • maximum operating pressure - 10.0 atm • built-in refrigerant dryer • electronic setting of compressor operating parameters • soundproof cabin (only 67 dB) • meets CE standards • user manual in Polish • weight - 227 kg Additional information: • possibility of obtaining a manufacturer's warranty after start-up by an authorized Atlas Copco service • available within 7 working days

Condition: good (used), Good working condition. Please check out our other listings as well. Cgjln Twqeqpfnbjbjt

Condition: used, ATLAS COPCO Cgeln Tweuruf Njqbot TYPE: ZR90 SCREW COMPRESSOR

Year of construction: 2021, Condition: like new (used), Air compressor which is used very little because of the lack of work. The reason for it to be sold is the closing of the factory. Cjln Twonl Dvdoqbsgt

Year of construction: 2020, Condition: new, Field of application: Construction Attachment suited for: Loaders Selling price: € 100, US$ 105,9 Galen Group is very experienced in delivering custom solutions to the underground mining industry. No matter the need, Galen’s experienced design, engineering and manufacturing teams deliver the solution that is right for you. More heavily guarded underground mining buckets designed for corrosive mining materials. For the entire underground loader line, Galen Ground Engaging Tools system now offers bolt on half arrow ground engaging tools (GET) for bucket edges. The system is designed for high abrasion applications where weld-on GET experience high wear rates. With the retention system, the bolt-on GET offer more wear material than standard weld-on GET, and the bolt-on design enables quick removal and replacement. Despite additional wear material, the low-profile front edge eases pile penetration and promotes fast bucket loading. Coln Twjn Tm A Tjqbegt

Condition: new, Atlas Copco G5FF 500 lt screw compressor NEW with refrigerant dryer Celn Tsg Tzvxjwqbogt Specification: • condition - New • manufacturer - Atlas Copco • capacity - 790 l/min • main engine power - 5.5 kW • tank - 500 l • maximum working pressure - 10.0 atm • built-in refrigerant dryer • electronic setting of compressor operating parameters • soundproof cabin (only 65 dB) • meets CE standards • weight - 221 kg Additional information: • possibility of obtaining a manufacturer's warranty after start-up by an authorized Atlas Copco service • user manual in Polish • available within 7-10 working days

Condition: new, Year of construction: 2023, overall weight: 340 kg, Atlas Copco G11FF screw compressor Specifications: - condition - New - manufacturer - Atlas Copco - capacity - 1440 l/min - main engine power - 11,0 kW - tank - 500 l - maximum operating pressure - 10.00 atm - built-in refrigeration dryer - electronic setting of compressor operating parameters - soundproofed cabin (only 67 dB) - meets CE standards Cgjljh Unupon Twqbet - weight - 340 kg Additional information: - possibility to obtain a manufacturer's warranty after commissioning by an authorized Atlas Copco service center - instruction manual in Polish and a set of documents for the Office of Technical Inspection - available immediately or within 7 working days

Condition: good (used), Year of construction: 2018, Compressed air tank, pressure vessel, pressure tank, compressed air vessel, pressure vessel, compressor tank, compressed air tank -Manufacturer: Atlas Copco Lohenner, vertical compressed air tank, galvanized -Contents: 1000 L -Operating pressure: 11 bar -Accessories: including attachments see photos -Dimensions: 1110/930/H2480 mm Cgoln Twju T Tqlsqbjt -without documentation -Weight: 253 kg

Condition: excellent (used), Year of construction: 2013, operating hours: 1,165 h, ATLAS COPCO COMPRESSOR XAS87 5,00m3 13r !!! Compressor DIESEL ATLAS COPCO XAS87 machine after service Technical data: capacity 5.00 m3/min; working pressure 7 Bar; year of production 2013; engine; KUBOTA mileage 1165h!!! compressor fully operational,ready to work,we give warranty net price: 39800 zł Coletu E Eyen Twqbegt gross price: 48954 zł Below is a link to the video , showing the work of the machine

Condition: good (used), fuel type: diesel, operating hours: 8,500 h, We have a used Atlas Copco compressor in good condition for sale. The Deutz engine can also be purchased separately. Technical specifications: Manufacturer: Atlas Copco Model: YAS146 Cgeln Tjv R Ecyswqbst Engine: Deutz 4-cylinder turbo diesel Type No.: BF4M1012 E Power: 60 kW at 2200 rpm Operating hours: approx. 8500 h Location: 24229 Dänischenhagen Delivery is available for an additional charge.

Condition: excellent (used), Year of construction: 2013, operating hours: 20,900 h, Functionality: fully functional, overall weight: 4,500 kg, power: 45 kW (61.18 HP), fuel tank capacity: 2,000 l, operating pressure: 10 bar, type of cooling: air, Complete compressor room Atlas Copco GA75VSD, built in 2013, 46,100 hours - 75 kW - Max. 10 bar Dimensions: L225 x W110 x H195 cm Atlas Copco GA45+, built in 2007, 21,000 hours - 45 kW - Max. 10 bar Dimensions: L205 x W100 x H180 cm Cgslsv Snn Ion Twqbjt Atlas Copco FD245, built in 2013, refrigeration dryer Dimensions: W120 x D110 x H100 cm Dimensions: 2000L tank, built in 2016, height 2.85 m Incl. oil-water separator System is currently still in operation; operating hours may vary. System is fully functional and regularly maintained. Maintenance kits and oils are included. Very good condition, see pictures. A forklift is available for loading. Pickup by appointment only in 75053 Gondelsheim. Shipping via freight forwarder is possible; please include your postal code in your inquiry.

Condition: excellent (used), Year of construction: 2004, operating hours: 114,000 h, overall weight: 4,400 kg, power: 250 kW (339.91 HP), volume flow: 2.802 m³/h, operating pressure: 10 bar, Regularly serviced, in excellent condition. Atlas Copco ZR250 Screw compressor, 10bar 46m3/min Oil-free, water-cooled. MD600 with adsorption dryer Compressor: Manufacturer: Atlas Copco Type: ZR 250 year of manufacture. 2004 loaded operating hours 114,000 Max. operating pressure: 10bar single-stage drive Cooling water consumption 3.7 liters/s Air delivery: 43.6m3/min Water cooled Oil free Power: 250 kW Mains voltage: 400v 50Hz 445A Last service: September 2023 Adsorption dryer, water-cooled Cgslerp D Uxjn Twqbst Manufacturer: Atlas Copco Type: MD 600 W Year of construction: 2004 Max. operating pressure: 10.5 bar Empty volume: 350 liters machine dimensions: length: 3000mm width: 1600mm height: 2000mm weight: 4400 kg

Condition: excellent (used), Manufacturer: SCA / ATLAS COPCO Year of construction: 2020 Colnot Tyipo Twqbsgt Dosing unit: SCA ADKE-2K-6000-H Pumpe: PPK57-0571P15-0800-SMC-KP5 Control unit: 90904.020441 Location: Dresden We have other SCA solutions on offer. Please do not hesitate to contact us.

Condition: excellent (used), Year of construction: 2003, Functionality: fully functional, overall weight: 575 kg, power: 18 kW (24.47 HP), operating pressure: 13 bar, pressure (max.): 18 bar, type of cooling: air, Equipment: documentation/manual, type plate available, ATLAS COPCO COMPRESSOR Cgeln Terry D Hewqbjt TYPE: G18 VSD FF year of construction: 2003

Condition: new, Year of construction: 2021, For sale are several new coolers from Mesabi suitable for various Wirtgen asphalt milling machines and in Atlas Copco ( Wagner MT 433 & MT5020 ). There are different sizes and models available. Year of construction : 2019 , 2020 , 2021 Price on request Csln Tsudkrzjwqbogt Location : 24229 Dänischenhagen

Condition: good (used), Year of construction: 1998, operating hours: 10,300 h, overall weight: 475 kg, fuel type: electric, volume flow: 186 m³/h, operating pressure: 10 bar, pressure (max.): 10 bar, 22kw 3.1m3/min ATLAS COPCO GA22 screw compressor Continuously serviced and maintained 22kw screw compressor for sale. Manufacturer: Atlas Copco GA22 SP operating hours: 10350 Year of manufacture: 1999 Capacity: 3.1 M3/minute, Cjln Twqstxpd Iobegt pressure: 10 bar Power 22kw main engine speed: 3,000/min Net weight: 405 Kg Dimensions: mm (LxWxH) Noise level: 66 dB service booklet, circuit diagram.

Condition: new, Year of construction: 2024, Field of application: Construction Empty weight: 280 kg General condition: very good Technical condition: very good Visual appearance: very good Cgsln Tovpgywowqbet Reference number: 1 Delivery terms: FOB Please contact Ö. Inalkac for more information New Blunt Tool/ Chisel? Stampfmeißel for HB3000 and HB3100

Condition: excellent (used), Year of construction: 2017, General information Field of application: Construction Reference number: 1 Weights Empty weight: 1.000 kg Celn Tsuc Ul Aswqbogt Maintenance, history and condition Number of owners: 1 Technical condition: very good Visual appearance: very good Other information Fits to following machines: 15 t - 26 t EPA Marked: yes Reconditioned: Yes Delivery terms: EXW Working pressure: 160-180 bar Required hydraulic flow: 140 l/min Strike count: 340-680 Latest inspection: 2 Production country: DE Additional information Please contact Ö. Inalkac for more information We offer you Rebuild/overhauled/ überholt Atlas Copco/ Epiroc MB1200DP from 2017. This model has New seal kit, retainer pins, bushes, stop pin, shock absorber, hoses, decals and new painted. MB1650, MB1500, MB1200, MB1000, MB1500