Used Atlas-Copco Xas 47 Ddg for sale (9,683)

Condition: new, overall weight: 41,000 kg, empty load weight: 9,800 kg, maximum load weight: 31,200 kg, axle configuration: 3 axles, tire size: 235 / 75 r 17,5, machine/vehicle number: dc46d2e1cd272305b99fb3160, Further information Vehicle consisting of: Chassis low loader semi-trailer Welded steel construction, fifth wheel plate with interchangeable 2 kingpin and 2 kingpin positions 24 t. 2-speed support winch, single-sided operation, with straight lower section, without thrust compensation Folding rear support 2 wheel chocks with holder Aluminum side collision protection Quarter-shell mudguards in front of and behind axle unit 1st pair of wheel recesses after gooseneck recessed in the low bed of the tramline area, slanted towards the entrance. Length at bottom approx. 1600 mm, depth of wheel recesses approx. 260 mm. Note! Frame in main beam area 260 mm higher than wheel recess. 2nd pair of wheel recesses between A and B axle. Bottom length approx. 350 mm, depth approx. 260 mm. Note! Frame in main carrier area 260 mm higher than wheel recess. If wheel loaders are to be driven and the overall height is to be checked, we request a technical data sheet for the wheel loader types with exact details (if overall height is exceeded -> customer risk, approval required), (depending on the ground clearance under the machines, inserts in the wheel recesses are required by the customer). Wheel recess cover can be pulled out from the main frame, with wooden inserts. Widenings extendable to 3,000 mm (not in the rear slope and not in the wheel recesses below) (track width of the construction machinery or vehicles to be transported must not exceed the outer frame width of 2,550 mm) Storage compartment for wooden planks on gooseneck, front transverse Wooden planks 70 mm for widening to 3000 mm Low loader lashing eyes 2 pairs of ring lashing eyes, 5 tons each at the front on the gooseneck 11 pairs of lashing rings at the top and sides, each 10 tons, embedded in the outer frame 2 x on gooseneck9 x in low loader bed distributed first lashing eye 250 mm from the front and last max. 250 mm from the rear, distance between lashing eyes not greater than 1100 mm 8 pairs of stake pockets embedded in the outer frame, inside 70 x 40 mm, or instead of stake pockets 5 to. Ring lashing eyes embedded in the floor Axles + suspension SAF drum brake axles Axle/chassis laser-measured Reduction in tire wear and fuel consumption Air suspension Wheels and tires 235 / 75 R 17,5 at the manufacturer's discretion Twin steel rims, factory silver Brake system 2-line compressed air brake system Spring-applied parking brake EBS, electronic braking system with EBS socket at the front, without connecting cable Attention: The trailer may only be towed by towing vehicles that guarantee the effectiveness of the ABS! Djloi Ri Hcorawdzskl 2 swap-proof coupling heads at the front, without connecting cable with lifting & lowering valve Axle load detection via EBS-Canbus signal, for indication via display in the driver's cab, truck must be prepared accordingly, no truck installed (no calibrated scales) Vehicle - driving stability system Electrical system 24 volt, multi-chamber lights, amber LED lighting on the side 2 white position lights at the front 2 white/red rear lane departure lights 2 x 7-pin interchangeable sockets at the front, without connecting cable 1 x LED rotating beacon with holder, switched via parking light (removable light) 2 pairs of warning signs, double LED illuminated and extendable to 3,000 mm, removable with plug Floor Gooseneck with steel / checker plate covering Storage box embedded in drive-over slope to gooseneck Then with 70 mm softwood floor, in the wheel recesses underneath and in the wheel

Condition: ready for operation (used), Functionality: fully functional, Year of construction: 2017, operating hours: 2,689 h, power: 55 kW (74.78 HP), motor manufacturer: Kohler, gearing type: hydrostat, fuel type: diesel, maximum speed: 40 km/h, first registration: 07/2017, color: red, overall weight: 4,700 kg, total height: 1,950 mm, total length: 3,870 mm, total width: 1,950 mm, Equipment: additional headlights, air conditioning, cabin, front power take-off, hydraulics, lighting, trailer coupling, Lof. Tractor Implement carrier: - Sauerburger - Grip4-75 Standard - EZ: 04.07.2017 - 2,698 operating hours - 4 cylinder Kohler diesel engine, 55kw; 2482ccm - Hydrostat, Vmax 40km/h - Trailer coupling 10.000kg - Front and rear linkage - Front linkage with sideshift - Front and rear hydraulics - Front PTO - Optional front-wheel, all-wheel steering or crab steering - Yellow light - Climate control - Joystick control - All-wheel + lock front and rear - Unladen weight: 2,985kg; permissible GG: 4,700kg - 387cm x 195cm x 195cm (lxwxh) - Municipal vehicle from 1st hand Receive all new vehicles by email - subscribe to our NEWSLETTER! Errors and typing errors possible, subject to prior sale! Dkjlrawju A S Dlsdzol

Condition: used, Functionality: fully functional, Year of construction: 2022, carrying capacity of cage: 454 kg, construction height: 2,300 mm, fuel type: electric, drive type: Elektro, load capacity: 454 kg, working height: 9,800 mm, Scissor lift Condition: New machine Dslotzg Egsrawdzekl Technical condition: New Front tires type: Bandages Rear tires type: Bandages Description: SNORKEL electric scissor lift 4726E NEW !!! Year of manufacture 2022 max. working height: 9.8 m max. platform height: 7.8 m Width: 1.19 m Platform capacity: 454 kg Own weight: 2250 kg Snorkel S4726E is a narrow 9.80 m high electric scissor lift, ideal for working in corridors and courtyards. With its numerous innovative design features, the S4726E can cope with even the most difficult conditions. STANDARD FEATURES Platform extension with double locking system Non-marking tires Cable remote control for loading Swing-out maintenance beams Double swing-out door Lowering alarm Motion alarm Load capacity, indoor use: 2 persons + tools Load capacity, outdoor use: 1 person + tools Proportional control Power cable to platform for retrofitting Operating hours counter & built-in diagnostic display Integrated battery charger Battery charge indicator Crane attachment points and forklift pockets Two attachment points for safety harness Yellow rotating light If you have any questions, please do not hesitate to contact Mr. Thomas Lehner.

Year of construction: 2009, Condition: new, Carrier chiller 19XR7070LF475 ,YEAR 2009, 290h run hours , 3100KW/1000ton cooling capacity, turbo compressor, Siemens Softstarter, R134a, high Efficient , Dslrasb Tulwowdzjkl 400V 50Hz, commissioning and service available.

Condition: ready for operation (used), Year of construction: 2015, KUKA KRC4 ESC Board 26 00226429 0 000018 01 0027026 90 + 20 00194763 0 000018 04 052978 49 Djlerlm Tforawdzekl Tested and well working. PLC Merkezi Robotics department specialised in industrial robots such as KUKA, ABB, FANUC and Yaskawa Motoman, robotic refurbishment and engineering processes. Currently, we have an inventory of 200 robots. We also provide spare part sales, refurbishment, repair and engineering services for industrial robotics. Our refurbished robots have a year of warranty.

Condition: used, Year of construction: 2017, Numerical Control Osi Plus includes: job management, tree navigation, advanced simulation, sequences, macro functions for sequences, macro functions for grooves, macro function for Editor, processing advanced statistics, warehouse function and remainder panels, management of technological parameters, logic for panels tense. QUICK OPTI software for cutting pattern optimization directly on the machine Cutting optimization software OPTIPLANNING PROFESSIONAL version Barcode Label Printer - OS-Labelling Additional key for office programming software Electrical cabinet air conditioner Cutting length mm 4400 Cutting width mm 4300 Blade projection 90 mm Manual front panel loading Lateral aligner integrated into the blade carriage Dkelrawdovc I N Tezel No. 1 fixed front bakelite table with air curtain system for unloading the panels (mm 2050 x 850) No. 3 adjustable front bakelite tables with air curtain system for unloading the panels (mm 2050 x 650) Main blade group (max. blade diam. / power) 355 mm / 11 kW Engraving group (max blade diam. / power) 200 mm / Kw 2.2 Adjustable speed of the blade carriage Pusher carriage with 9 clamps Blade carriage speed 120 m/min Twin Pusher 1.2 system with 1 additional clamp on pusher carriage (position 570 mm) to perform different patterns cutting at the same time DIGISET device for electronic adjustment of the scoring blade Air curtain machine plan

Condition: new, overall weight: 41,000 kg, empty load weight: 8,900 kg, maximum load weight: 32,100 kg, axle configuration: 3 axles, tire size: 235 / 75 r 17,5, machine/vehicle number: 2428b2018baf171e60fef6740, Further information Chassis low loader semi-trailer Welded steel construction, fifth wheel plate with interchangeable 2 kingpin and 2 kingpin positions, 24 t. 2-speed support winch, single-sided operation, with straight lower section, without thrust compensation Folding rear support 2 wheel chocks with holder Aluminum side collision protection Rear spray flaps across the entire width Mudguards in front of 1st axle and rear of each axle with anti-spray, according to EC Widenings extendable to 3,000 mm (not in rear slope) (track width of the construction machinery or vehicles to be transported must not exceed the outer frame width of 2,550 mm) Storage compartment for wooden planks in the middle of the cargo bed Wooden planks 70 mm for widening to 3000 mm Low loader lashing eyes 2 pairs of ring lashing eyes, 5 tons each at the front on gooseneck 11 pairs of lashing mushrooms at the top and sides of the outer frame, 10 tons each 2 x on gooseneck 9 x distributed in the low loading area First lashing eye 250 mm from the front and last max. 250 mm from the rear, distance between lashing eyes not greater than 1100 mm 8 pairs of stake pockets embedded in the outer frame, inside 70 x 40 mm, (can be converted to 5 to. ring lashing eyes, not included in the scope of delivery) Axles + suspension SAF drum brake axles Axle/chassis laser-measured Reduction in tire wear and fuel consumption Air suspension Wheels and tires 235 / 75 R 17.5 brand of the manufacturer's choice Twin steel rims, factory silver Brake system 2-line compressed air brake system Colored line routing for easy servicing. Spring-applied parking brake EBS, electronic braking system with EBS socket at the front, without connecting cable Attention: The trailer may only be towed by towing vehicles that guarantee the effectiveness of the ABS! 2 swap-proof coupling heads at the front, without connecting cable with lifting & lowering valve Axle load detection via EBS-Canbus signal, for indication via display in the driver's cab, truck must be prepared accordingly, no truck installed (no calibrated scales) Vehicle - driving stability system Electrical system 24 volt, multi-chamber lights, amber LED lighting on the side 2 white position lights at the front 2 white/red rear lane departure lights 2 x 7-pin interchangeable sockets at the front, without connecting cable 1 LED rotating beacon with holder, switched via parking light (light can be removed) 2 pairs of warning signs, double LED illuminated and extendable to 3,000 mm Floor Gooseneck with sheet steel covering Storage box recessed in drive-over slope to gooseneck Then with 70 mm softwood floor, steel/ checker plate covering in the wheel housing area Rear slope with 70 mm softwood floor Deep loading area incl. rear slope 9 200 mm Dkelrawsi Ri E Rodzjl Drive-on ramps Steel ramps 2,800 mm long, 750 mm wide, can be moved sideways Covered with wood Hydraulic via tractor power take-off with throttle, actuation on the left side in FR Hydraulic connection with SVK socket NW 10/3, without connecting hoses Operating instructions With 10,000 kg axle load, a special permit is required, only indivisible load possible!!! Special permit required if total train weight exceeds 40 tons! The specified total weight is technically possible; depending on the load, the total weight may not be achieved while complying with the permissible axle/support and fifth-wheel loads. (Poor driving and trailing behavior possible due to incorrect load distribution) When applying for a special pe

Condition: good (used), Year of construction: 1986, RANC 547 P, machine no.: 476, table fixed, table width 2200 mm, table length 4950 mm, without tool changer, angle drilling gear, 6 direct milling drives, very powerful motors Delraepn Tt Rewdzokl

Condition: new, power: 30 kW (40.79 HP), fuel type: diesel, fuel consumption per hour: 3.5 l/h, fuel tank capacity: 30 l, overall weight: 5,200 kg, Year of construction: 2024, operating hours: 1 h, machine/vehicle number: 0009, Equipment: hydraulics, rubber tracks, Molecrusher 4733 Jaw Crusher We offer at introductory prices the new Molecrusher 4733 single-spindle jaw crusher. Crushing unit RESTA input 470x330mm Dslrawdsuntlajzskl output up to 30t/hr according to the set slot. Automatically controlled feeding conveyor (can be switched to manual) Unique de-greasing system using disc separator with separate discharge conveyor. Container frame DIN 30722, adjustable hook height 1000/1570mm for easy transport Weight 5.25t Powered by a separate 35kW diesel generator ( or mains socket 63A ) Unique opportunity to use construction waste directly on site.

Condition: used, load capacity: 1,000 kg, Cardboard clamp Dkslrst S Npieawdzol ISO class: ISO class 2 = 1,000 - 2,500 kg Technical condition: good Description: ISO 2A (41 cm) Capacity 1000 kg Opening range 480-1630 mm Clamp length 1000 mm Clamp height 1000 mm Width 950 mm ID OS1102

Condition: ready for operation (used), Functionality: fully functional, mileage: 789,527 km, power: 345 kW (469.07 HP), fuel type: diesel, color: white, axle configuration: 4x2, tire size: 315/60 22.5 - 295/60 22.5, fuel: diesel, brakes: engine braking, gearing type: automatic, emission class: euro6, suspension: air/air, Year of construction: 2014, Equipment: ABS, air conditioning, airbag, differential lock, onboard computer, sleeping cabin, spoiler, tractor FULL PNEUMATIC penumatic 315 /60 LOWERED Dslrawdouu Sl Sezjkl

Condition: excellent (used), Rear wall grating for shelf rack Schäfer R3000 Approx. 100 pcs. Used, very good condition, see pictures Delraeiix D Ejwdzskl dimensions: 126 x 147 cm Mesh size: 5 x 5 cm Negotiation price: € 25,-- net per pc. ex stock Numerous gratings with different mesh sizes and bearing bars available! Goods are in stock. Transport and assembly possible on request. Inspection possible at any time by arrangement. More info on request. Constantly over 5000 running meters of pallet racks from numerous manufacturers in stock. (Changes and errors in the technical data, specifications and prices and prices as well as prior sale reserved! See our terms and conditions, all prices excl. VAT ex stock) Purchase / Sale We are constantly looking for, or offer numerous items from various areas broom-clean business clearances company liquidations Fast- flexible - ready to hit! We also clear and dispose for liquidators. Write us with some keywords, we will contact you immediately. To get to our site, please click on our logo!

Condition: new, overall weight: 41,000 kg, empty load weight: 11,800 kg, maximum load weight: 29,200 kg, axle configuration: 3 axles, tire size: 235 / 75 r 17,5, machine/vehicle number: 364a8214fd0c4afa2b936c7db, Further information Chassis low loader semi-trailer Welded steel construction, fifth wheel plate with interchangeable 2 kingpin and 2 kingpin positions (not in conjunction with forced steering) 24 t. 2-speed support winch, single-side operation, with semicircular lower section and straight connecting plate, with thrust compensation Folding rear support Dkjlrsi Ri E Usawdzjl Wheel chocks with holder Aluminum side collision protection Spray flaps in front of 1st axle and rear of each axle with anti-spray, according to EC Stainless steel storage box, w=600/h=400/t=500 mm, with polished door, lockable Lifting table to gooseneck, approx. 3000 mm long, can be raised hydraulically to pass over the gooseneck, with mechanical lock when raised. Operation with radio remote control Electric cable winch, 24 volt, tractive force 8165 kg, mounted in the middle at the very front of the loading area, standing on the gooseneck, in stainless steel box with door (if technically possible, exact testing still required), operation with radio remote control, cable length 35 m x approx. 10 mm, with roller cable window and removable guide rollers on gooseneck and rear inclination. Low loader lashing eyes Gooseneck:5 pairs of lashing eyes recessed in the outer frame, each with 5 to.2 pairs of lashing eyes in the middle, each with 5 to.1 pair of lashing mushrooms on the top and outside of the outer frame recessed in the neck slope, each with 10 tisch:4 pairs of lashing eyes recessed in the outer frame, each with 5 to.4 pairs of lashing eyes in the middle, each with 5 to. Pair of lashing eyes in the middle, each 5 to.1 pair of lashing mushrooms at the top and outside of the outer frame, each 10 fbett:4 pairs of lashing eyes in the outer frame, each 5 to.5 pairs of lashing eyes in the middle, each 5 to.4 pairs of lashing mushrooms at the top and outside of the outer frame, each 10 to. Axles + suspension SAF drum brake axles Axle/chassis laser-measured Reduction of tire wear and fuel consumption Last axle self-steering, with automatic reversing lock via reversing light, and additional locking function on the vehicle via hand button. Air suspension with lift & lower valve, with hold function for lowering + auto-reset function Wheels and tires 235 / 75 R 17,5 according to manufacturer's choice Twin steel rims, factory silver Brake system 2-line compressed air brake system Spring-applied parking brake Vehicle stability system Axle load detection via EBS-Canbus signal, for indication via display in driver's cab, truck must be prepared accordingly, no truck installation (no calibrated scales) 2 swap-proof coupling heads at the front, without connecting cable EBS, electronic brake system with EBS socket at the front, without connecting cable Attention: The trailer may only be towed by towing vehicles that guarantee the effectiveness of the ABS! Electrical system 24 volt, multi-chamber lights, amber LED lighting at the side 2 white position lights at the front 2 white/red lane departure lights at the rear Lights completely in LED design (note! with certain towing vehicles, misdiagnosis may occur, although the function is given) 2 x 7-pin and 1 x 15-pin interchangeable sockets at the front, without connecting cable Additional LED work light(s) at the rear, switched via reversing light LED rotating beacon with holder, switched via parking light (light can be removed) Pair of warning signs, double LED illuminated and extendable to 3,000 mm, removable with plug Floor Gooseneck covered with Mega Gri

Condition: excellent (used), Year of construction: 2001, spindle speed (max.): 12,000 rpm, Copy router Power (kW) 1.5 Voltage (V) 400 Operating pressure (bar) 7 Milling motor speed (min-1) 12,000 Max. Workpiece cross-section W x H (mm) 200 x 100 Milling area L x W (mm) 315 x 130 Immersion depth (mm) 200 Dslstqytiorawdzskl Machine dimensions L x D x H (mm) KF 347 = 1,260 x 820 x 1,650 Weight (kg) approx. 350

Condition: excellent (used), Functionality: fully functional, machine/vehicle number: 1171302502, input voltage: 400 V, Inverter, frequency converter ABB ACS880-01-169A-3+E200+K475. Delevakd Ijrawdzjkl Disassembled from a working production line. Tested in our service center. If you need more photos or videos of operation, please contact us. 12 pieces available, price per piece.

Condition: refurbished (used), Fortuna UAF470 surface splitting machine Main features: - working area 470mm - feeding of material up roller - down roller - automatic knife positioning - stepless adjustment of the material feeding speed - automatic and manual material reversing - dust collector and waste basket The machine is in perfect technical condition after a general overhaul Fortuna UAF470 surface splitting machine - leather splitting machine Main features: - working area 470mm - material feeding roller top - roller bottom - automatic knife positioning - smooth regulation of material feeding speed - automatic and manual material retraction - dust absorber and waste basket Machine in perfect technical condition after general renovation Fortuna UAF470 Oberflächenspaltmaschine - Lederspaltmaschine Hauptmerkmale: - Arbeitsbereich 470 mm - Materialzuführung - Aufwärtswalze - Abwärtswalze - Automatische Messerpositionierung - stufenlose Regulierung der Materialvorschubgeschwindigkeit - Automatische und manuelle Materialumkehr Djlrasvaxpfowdzjkl - Staubabsorber und Abfallbehälter Die Maschine befindet sich nach der Generalüberholung in einem technisch einwandfreien Zustand

Condition: as good as new (ex-display), Year of construction: 2013, KUKA Arm KR 210 I Serie 2000 ZH210 I Art. Nr. 00-106-447 (00106447) Djlraefu Ig Newdzekl # Calibrating the in-line wrist´s kinematic configuration. # Accuracy and performance testing according to ISO 9283 standard. ( more models on request ). (all in stock).

Condition: ready for operation (used), Year of construction: 2007, operating hours: 38,929 h, Functionality: fully functional, clamping force: 1,500 kN, screw diameter: 40 mm, clearance between the columns: 470 mm, injection weight: 184 g, ejector stroke: 175 mm, TECHNICAL DETAILS Clamping force: 150 t Clamping force / increased force: max. 35 / 350 kN Opening stroke: 500 mm Mold height: 250 mm Daylight of the clamping platen: 750 mm Distance between the columns: 470 x 470 mm Mold mounting platens (W x H): 650 x 650 mm Weight of the movable mold half: max. 800 kg Ejector force: max. 40 kN Ejector stroke: 175 mm Injection unit Screw diameter: 40 mm Effective screw length (L/D): 20 Screw stroke: max. 160 mm Injection volume: 201 cm³ Weight of the shot: 184 g Material throughput PS: max. 29 kg/h Dkjlraweunlckjdzol Material throughput PA6.6: max. 15 kg/h Injection pressure: max. 2,000 bar Injection flow: max. 168 cm³/s Counter and back pressure positive/negative: max. 350 / 160 bar Screw peripheral speed: max. 53 m/min Screw torque: max. 700 Nm Nozzle contact force: max. 70 kN Stroke of the nozzle retraction movement: max. 300 mm Installed cylinder heating power: 4 x 2,200 W Installed nozzle heating power: 600 W Material hopper capacity: 50 l MACHINE DETAILS Operating hours: 38,929 h Dimensions (L x W x H): 4,900 x 1,750 x 2,100 mm Weight: 4,590 kg EQUIPMENT - Core pullers: 1x - Compressed air blower: 1x

Condition: good (used), Bitzer compressor unit Type: HSK 7471-90 (x3) Volume: 250 m3 / h (x3) Cooling capacity: 435 kW at -10 ° C / 40 ° C, 280 kW at -20 ° C / 40 ° C Refrigerant: R404A Dkjleg Rcfvjrawdzjl Dimensions: 3600 x 1350 x 2600 mm Pieces in stock: 1 Stock number: Z9 Condition: Used We have many other refrigeration devices. Chillers, compressors, coolers, condensers, chillers, cold rooms, refrigeration and gastronomic furniture as well as machines and devices for restaurants and meat processing. See our other auctions or call us, not everything is machineseeker.

Condition: new, Max cutting height: 280 mm Dkelraoh H Dniewdzjl Max cutting width: 470 mm Wheel diameter: 470 mm Max belt width: 38 mm Min tape width: 6 mm Tape length: 3605 mm Working table dimensions: 490x630 mm Work table tilt: Extraction port diameter: 100 mm Engine power: 3.5 Kw Voltage: 400V The machine is available immediately! Machine dimensions: Length: 900 mm Width: 650 mm Height: 1900 mm

Condition: used, Functionality: fully functional, Scheugenpflug A310 K4750-X11 Material Preparation and Feeding unit. The all-round system A310 simultaneously prepares the dispensing material while loading it from the barrel. Temperature control also helps to optimise the viscosity of the dispensing medium. The applied vacuum evacuates air trapped in the material already during preparation. Degassed material is required for a bubble-free dispensing process. Circulating the dispensing material continuously prevents sedimentation of the contained filler materials and keeps the properties of the dispensing material components at a constant level. The stirring intensity is adjusted to the dispensing material being prepared. Used for l Materials: • One and two component • Liquid to medium viscous • Non-abrasive to highly abrasive • Non-filled to highly filled Technical Data: • W x H x D (1C-60 l) 700 x 1950 x 1000 mm W x H x D (2C-60/60 l) 700 x 1950 x 1400 mm • Weight: 240 kg (1C-60 l) 400 kg (2C-60/60 l) • Feeding volume: 250 ml/stroke • Power supply: 3~ 400 V, 50/60 Hz, CEE 16 A • Ejector evacuation power: 12 l/min (at 6 bar) • Vacuum pump evac. power: 242 - 283 l/min • Heating capacity: up to 80°C • Peripheral speed of agitation blade: 39 rpm • Tank heater power: (230 V) approx. 1000 W Good working condition. Please check out our other listings as well. Dkslretp Df Hoawdzsl

Condition: used, Functionality: fully functional, machine/vehicle number: 54710003, Adast Dominant 547 No.:54710003 4 colours Dkjlrjunrq Uoawdzsl alcohol counter powder B/3 ink-flow

Condition: as good as new (ex-display), Year of construction: 2013, KUKA Arm KR 210/240 Serie 2000 ZH210/240 Art. Nr. 00-106-447 (00106447) # Calibrating the in-line wrist´s kinematic configuration. Dolrofu Iwfoawdzskl # Accuracy and performance testing according to ISO 9283 standard. ( more models on request ). (all in stock).

Condition: new, color: white, axle configuration: 6x4, wheelbase: 4,500 mm, gearing type: mechanical, emission class: euro3, Equipment: air conditioning, cruise control, trailer coupling, = Additional options and accessories = - Immobiliser - Sun visor - Tachograph = Remarks = Model description: IVECO T-WAY Chassis 6×4 AD380T47H WHEELBASE 4500 MY24 Chassis Cab Code Diesel Type: AD380T47H - SG64 GVW: 41 Ton Rear Axle: HR-TP Brake Type: Disc Brakes (Front/Rear) Tyres: 20013 - Pneumatic 325/95R24 Drive Hand: LH Drive year of manufacture: 2024 engine power: Cursor 13-470 CV Rear Overhang 1990mm FMS Data Interface Rear Multi Leaf spring 13 leaps Front Reinforced parabolic suspension Load 9000-32000 Rear Axle Ratio 4.67 Drive Tire 325/95R24 Electronic Brake System + Brake Assist System Safety Hor. Filter Cartridge Horizontal Air Filter 630cc air compressor Standard air tank plating Steel Air tanks 90A alternator Air processing unit free discharge Horizontal battery positioned on side frame Standar Grey Plastic Part Mechanical Cab Suspension At low roof cab Roof in standard color Standard reverse STD temp climate Fabric air susp driver seat Lower Exhaust Pipe Engine Speed 1900 RPM Steel front bumper Front Anti Roll Bar Rear Anti Roll Bar Logistic Mode Off Bulb Rear Light Mechanical Battery Switch Fabric sta 2 way Adj pass PTO pre-equipment Expansion Module Engine Plate Radiator Guard Provision Radio and CB Cross member D 120 KN Revere Monotone Buzzer Steel Wheels Grey IC44 Chassis Standard Equipment MPH/KPH Speedometer Soft Touch Steering wheel Pre Heater Tyre Inflation Hose VIN Code check digit Warning Triangle Radice VIN WJM STD setting c11/c13 1 bunk without protection net Pre filter high performance transparent 290L Aluminum fuel tank ZF 16S 2520 TO GBOX Standard H Lamps Electronic Horn Plates in ECC Language Jacking Equipment = More information = Djlraweuu Nx Nedzjkl Transmission: 16 gears, Manual gearbox

Condition: ready for operation (used), Bitzer refrigerant compressors unit Type: HSK7471-90-40P (x3) Volume: 250 m3/h (x3) Cooling capacity for R404A: 531 kW at -5°C/40°C, 435 kW at -10°C/40°C, 280 kW at -20°C/40°C Dimensions: 4500 x 1200 x 2300 mm Dkjlrawdepgy Ixezjl Condenser Thermofin Type: X-TCH 100.1-26-B-N(D5) Cooling capacity: 1103 / 997 KW Air flow: 354 000 / 281 000 m3/h Number of fans: 12 x 1000 mm Dimensions: 11 800 x 2300 x 1600 mm Volume: 276 L Weight: 2 400 kg Control panel Dimensions: 2400 x 600 x 2000 mm We have a lot of refrigeration equipment. Chillers, compressors, coolers, condensers, chillers, cold rooms, refrigeration and gastronomic furniture as well as machines and devices for restaurants and meat processing. See our other auctions or call us, not everything is machineseeker.