Used Valtra/Valmet 8450 Hi-Tech for sale (144,317)

Condition: good (used), Year of construction: 2011, Hioki 3154 Digital M Hitester Manufacturer: Hioki Japan Type: 3154 Digital M Hitester Year of manufacture: 2011 For further technical data, please refer to the type plate in the attached photos. Otherwise, please note the following information and call us if necessary. Thank you very much. - Condition: please see photos, the item was stocked as a spare part, comes from the spare parts warehouse or was dismantled from an existing system. - Further information: Please note that the item may have already been used. Some scratches, stains, discolorations or cable harnesses may therefore still be present. - The item is offered as used, without any guarantee or warranty. - Some of our items have been dismantled from functioning production systems or are unused stock items, - Items have been in storage for several years and are expressly offered as "used goods", even if they have hardly been used or have only been kept in stock as spare parts. - Deviations from technical data and errors in the description of the item may occur and are reserved. - Condition/packaging as shown in the photos or according to individual agreement. - For further questions or request for more photos please contact us. - For shipping abroad, please inquire, as shipping costs vary. Dsln Ugujvahxcj Nskl - For technical or other queries please contact us at any time. - Appointments for viewing or collection are of course possible by arrangement. Please contact us if you have any questions or would like to arrange a viewing. Thank you for your interest.

Condition: used, Year of construction: 2003, Crushes bottles by pressing them. - high crushing capacity - high volume reduction - accident-proof (splinter-proof) - low noise [85/87 dB(Ai)] - low wear rate - compact design (minimum space requirement) Dslsvcqhxjn Ugu Nskl Crushing capacity: 6000 b/h Current: 6,5 A Voltage: 380 V Frequency: 50 Hz Length: 15220 mm Width: 1300 mm Height: 22600 mm Weight: 700 kg Base construction: On dome feet Features: Fragment tub, noise protection box, slot for manual disposal of single bottles

Condition: good (used), Code: 0193 Brand: CASATI MACCHINE Model: BIG 3200 - CE Standard Hydraulic two knives veneer pack guillotine shear - CE Standard Description: Sturdy steel made structure, cast iron knife beam. Self-lubrificating prismatic slide-ways The machine allows, with a single operation, to cut the veneer pack on both sides to be trimmed - The simultaneous trimming on two sides of the veneer pack is carried out thanks to the movement at the same time, of two knives, one fitted on a fixed structure and the other one on a moving part - The machine is equipped with an adjustable rear shoulder, as well as with a pressor to clamp the veneer pack during cutting operations. Possibility of working as a single guillotine shear Useful cutting length (as double guillotine shear) mm 3200 Useful cutting length (as single guillotine shear) mm 3550 Pressore stroke mm 100 Pressor width mm 550 Min width to be cut mm 18 Max width to be cut mm 530 Scrap adjustment field mm 0/50 Photoelectric cells Electronic programmer allowing to program the number of cuts to be effectuated and the relevant width Perimeter protections Total power installed Kw 13, 9 Operating pressure bar 6/7 Overall dimensions mm 5200 x 1700 x 1800 h Weight kg 9000 Delnjqzky Es Ugu Nokl

Condition: used, Year of construction: 2003, x-travel 1000 mm y-travel 800 mm Dksln Uswhqtkegu Nol z-travel 800 mm control SIN840D speeds 10 - 10.000 U/min feed range 1 - 36000 mm/min B - axis 360 x 1 ° repeating accuracy + / - 3 " surface area 2 x 500 x 630 mm tool diameter 100 mm workpiece length 650 mm workpiece weight max. 40 kg tool taper DIN 69871 SK 50 workpiece weight 800 kg tool magacine with 100 Plätzen wotkpiece diameter with 2 vacant positions 325 mm Chip to chip time ca. 8,00 sec. change time of pallets ca. 12,00 sec total power requirement 65,00 kW weight of the machine ca. 20,00 t dimensions of the machine ca. 7,80 x 3,50 x H3,40 m Horizontal machining center with SIEMENS SIN840D control. NC-rotary table; chip conveyor; coolant-unit; coolant through the spindle Magazine with 2 cassette à 50 pockets.

Condition: good (used), Year of construction: 2018, operating hours: 1,777 h, fuel type: hybrid, color: red, General information Field of application: Construction Weights Empty weight: 4.365 kg Functional Mast: articulated arm Lifting capacity: 230 kg Working height: 2.600 cm Condition Technical condition: good Visual appearance: good Dsln Uowgc Scogu Njkl Other information Delivery terms: EXW Max. horizontal reach: 1400 m Transport dimensions (LxWxH): 4x0,99x2 Production country: IT Additional information Please contact Vink Machinery for more information Hinowa Lightlift 26.14 IIIS * 2018 * Diesel and 230 volt * 26 meter working height * 14 meter horizontal reach * Adjustable tracks * Remote control * Variable outriggers * Outrigger machine * ​​4365 kg net weight

Condition: new, Year of construction: 2024, We convert laser cutting machines from CO2 to fiber laser Dksljnkal Dsn Ugu Njl

Condition: good (used), Year of construction: 2002, Universal CNC lathe BOEHRINGER NG 200 Manufacturer: BOEHRINGER Type: NG200 CNC double Control unit: Siemens 840D Year of construction: 10/2001 Turning diameter: 290 mm Turning length: 850 mm Control: SIEMENS 840 D Turning diameter over bed: 600 mm Turret 1 Turret 2 Counter spindle Dkjln Ujvr Eqgogu Nel Counter spindle stock Tailstock C-axis Driven tools Automatic machine doors - newly retrofitted Z-axis resolution: 40nm (2nm interpolated) Travel path in Z: 740mm Rapid traverse speed in Z: 25 m/min Centering tip SK 30 X-axis resolution: 125nm (8nm interpolated) Travel path in Z: 220mm Rapid traverse speed in Z: 25 m/min Distance between main and counter spindle: 1034mm Drive power: 30-72 kW Torque: 662 Nm Max. speed range: 4500 rpm Spindle head: size 6/8 DIN 55026 Spindle diameter in front bearing: 120 mm Chuck diameter: 200-315mm Spindle bore: 103 mm Tailstock quill holder MK: MK 4 Machine weight approx. [weight]: 11 t Space required approx. [needed space]: 6.0x2.3x2.5 m Complete documentation is available. Inspection under power can be arranged at short notice. We are happy to answer any further questions you may have. Price, ex warehouse here plus VAT. Condition: good - ready for demonstration Delivery: ex warehouse - as seen Payment: net - after receipt of invoice Subject to prior sale, errors excepted. We ask for your order. Other machines and systems available from stock - please enquire. We look forward to hearing from you.

Condition: used, Year of construction: 2002, Screw compressor, single-stage, oil-free. Dkoln Ugovcqt Isu Nol Max. flow rate approx.: 1080 m³/h Power: 75 kW Length: 1605 mm Width: 1250 mm Height: 2000 mm

Condition: good (used), Code: 0079 Brand: HIRZT - ITALY Model: LIVRA/5 - Norme CE Point to point through-feed boring machine with drilling from the bottom for furniture, kitchens, custom furniture, bathroom furniture, panels, for joinery and various - CE Standard Features: Total flexibility: Zero setting time High productivity : very short time of panel loading/unloading Graphic and parametric CN 4 NC axis: Axis X : panel movement by clamps Axis Y : boring head movement Axis Z : vertical boring head movement Axis X : micro head movement for front/back boring Aggregate circular saw Full Productivity : For serial processing the unloading system allows a high productivity - lt is possible to process sequences of big and small lots with a reduction of positioning and loading times Advantage of boring from the bottom - 1.Cleaning: Boring from the bottom gets the panel's good face protected from any dangerous contact - 2. Finish: The boring from the bottom definitely eliminates shavings from the hole reaching a high finish - The automatic multi­ speed feeding to the boring position makes the process of high performance for time required and precision NC with PC Office on a separate consolle, color display 17”, cd-rom reader, net card, USB and mouse - Graphic platform entirely developed using "object -oriented’ technology - Integrated CAD/CAM system for an easy creation of 3D parametric drawings and their translation into ISO language - Interface with other CAD systems and import/export of drawings in various formats Step by step clamps processing : The step by step panel feeding with clamps returning to the loading position, is made only with the panel blocked to avoid any error of panel positioning - Boring of very high precision with no limits of panel length Technical data: Max panel width mm 800 4 NC axis Working speed 60 mt/1' Spindles RPM 3400 Beginning-end panel check standard Suction port diameter - n° 1 diameter 140 - n° 1 diameter 100 Dolnsv Tx D As Ugu Nokl Air pressure 6 bar Power Kw 4,8 Overall dimensions: Machine mm 2400 x 2250 x 1450 h - Electrical cabinet mm 700 X 750 x 1700 h Weight kg 1100

Condition: used, Year of construction: 1971, roll diameter 300 mm throat 450 mm table height 480 mm Dkoln Uguewhqtde Nol saw band length 3350 mm width of saw-band 10 mm total power requirement 2,2 kW weight of the machine ca. 520 Kg dimensions of the machine ca. 1,00 x 0,70 x 1,85 m Saw for body parts made of sheet metal, plastic etc good accessibility of the saw blade, guided freehand. Cutting speed infinitely variable up to 1000 m/min Tape welding device IDEAL BS00

Condition: new, Year of construction: 2024, Equipment: all wheel drive, Engine KUBOTA V2403-CR-T-EW03, 4 cylinder, Euro 5 engine, multipurpose / loading bucket 4:1 - 0.35 m³, 1615 mm wide, quick-change system, hammer device, immobilizer, ROPS-FOPS cab with air conditioning and heating, radio-CD-MP3 player, Top Air pre-air filter, audible reversing alarm, LCD information display, monolithic rear window, folding side window, ergonomic joystick controls, interior lighting, 12-volt socket, personal storage compartments, luxury driver's seat with heating, rotating beacon, vehicle can be fitted with advertising and/or lettering Our offer is generally without new TÜV approval. If a new TÜV inspection is required, we will be happy to make you an offer from our partner workshops! Vehicle can be covered with advertising and/or lettering. Our general terms of delivery and payment apply. We would be pleased to make you a financing or leasing offer for this object. Delnov S R Has Ugu Nskl Please contact us!

Condition: used, Year of construction: 2019, operating hours: 5,630 h, Field of application: Construction Serial number: HCMDBS5XC006001xxxx Please contact ATS Norway AS for more information Please provide reference number upon request: 20196 Specifications: Certified to Model year: 2019 Hours: Approximately 5,630 Power: 128 kW Net weight: 20,800 kg Belt width: Approx. 60 cm Machine width: Approx. 275 cm Undercarriage: See pictures Quick release: Gjerstad S70 Buckets: Sanding bucket and digging bucket Rotor tilt Leica GPS system Deln Ugjwdu D Eeu Nskl Central grease Hammer hydraulics Rear view camera Additional work light Radio/CD Air conditioning / AC Description:Hitachi ZX190LC crawler excavator from 2019 with approximately 5,630 hours.The machine is delivered with both a sanding bucket and a digging bucket , a tiltrotator , and Leica GPS .The machine is equipped with central grease, hammer hydraulics and a reversing camera.Ready for delivery at short notice. Hours: 5630 Total Weight: 20800 Width: 275 Kw: 128

Condition: excellent (used), Year of construction: 2012, Functionality: fully functional, Escofier I300V Doln Uevcc Scogu Nskl Gear rolling machine CNC thread rolling and polishing machine manufactured by Escofier, type Flex 40 Syncroll, year 2012 Control Siemens, type Sinumerik

Condition: used, Year of construction: 2016, Cylindroconical fermentation tank, with insulation and stainless steel panelling, 2 cooling zones, with temperature control on the tank, hose content indicator. 2nd outlet with yeast spout. Additional title: Fermentation tank Content: 7800 l Dkjln Uevcq Apjgu Nsl Max. working overpressure: 2 bar Max. working temperature: 50 °C Length: 1850 mm Width: 1850 mm Height: 4885 mm Operation / Control: Temperature control on the tank Material: stainless steel 1.4301 Base construction: vertical, cylindroconical, on pipe feet Features: insulated with stainless steel panelling; cone cooling with 7 l and frame cooling with 40 l volume, 2 outlets DN 32 (1 x with yeast connection); hose content indicator; bunging device; temperature control; sampling tap; safety valve; pressure gauge; fill level indicator; manhole; cleaning line; CIP spray head; crane eyes; ladder bracket

Condition: new, Code: N0022 Brand: ARIATECH Model: ATB 2 - CE Standard Professional wheeled dust collector with 2 filter bags for dust and chips from carpentries, machine shops and various - CE Standard Structure in sturdy galvanized sheet metal Wheeled base to be able to be moved around the workshop and be connected to more machines Can be mounted indifferently either with the suction mouth facing upward or downward Motor Hp 4 ( Kw 3) Diameter of nylon bags mm 500 Diameter of plastic collection bags mm 500 Overall dimensions of assembled machine mm 1700 x 600 x 2500 h Overall dimensions of disassembled and packed machine mm 1750 x 800 x 800 h Dkeln Ugusu S N T Hs Nel Weight kg 130

Condition: used, Year of construction: 2005, travel distance X-axis: 2,000 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 550 mm, controller manufacturer: FANUC, controller model: 18I MB, total height: 2,500 mm, spindle speed (max.): 9,000 rpm, space requirement length: 5,357 mm, space requirement width: 3,202 mm, CONTROLS .. CNC controls FANUC 18I MB WORKING RANGE -CUBIC- Dkolnewha Tmo Ugu Nol .. number of processing axes (excl parallel axes): 3 .. X-axis travel: 2000 mm .. Y-axis travel: 500 mm .. Z-axis travel: 550 mm SPINDLE / HEAD .. spindle revolutions (max): 9000 /min TOOL MAGAZINE .. number of positions: 24 .. tool diameter max.: 75 mm .. - with free neighbour positions: 160 mm .. tool length max.: 320 mm .. tool weight max.: 4 kg .. tool changing time: 15 s AUTOMATIC WORKLOAD EQUIPMENT .. number of store positions: 24 DIMENSIONS / WEIGHTS .. space requirements -left/right-: 5357 mm .. space requirements -front/back-: 3202 mm .. total height: 2500 mm including chip conveyor Duty cycle 53'700h Spindle hours 26'400h Tool holder 5 pieces The following auxilliaries can be bought seperately at additional cost: Röhm double clamps Torsion springs for tool holders 50 pieces Tribos-S Polygon chuck with diameter 6,8,10,12,16 Lathe chuck diameter 12,20,32 SK40 Tightening bolt with hole

Condition: excellent (used), Independent machine (standing alone) and/or Universal machine (First & Second in a line) Electronic Programmer EasyLing Safety and sound-proof enclosure No. 3+3 Vertical columns to support the working units Min. useful working width (mm) 240 Max. useful working width (mm) 3100 Dslswhmdfjn Ugu Nekl Min. useful working tickness (mm) 3 Max. useful working tickness (mm) 150 Distance between center-axes of the disappearing dogs (mm) 800 Adjustable (min/max) feeding speed (m/min) 4 - 24 Total installed power No. 4 Working groups (for each machine's side): Scoring Unit Jumping Scoring Unit 1 x Kw 3 (RPM 6000) Hogging Unit 1 x Kw 6 (RPM 6000) 0-10° Jumping Milling Unit 1 x Kw 6 (RPM 6000) 0°-90° Milling-Shaping unit 1 x Kw 6 (RPM 6000) 0°-90°

Condition: ready for operation (used), Year of construction: 2009, operating hours: 15,716 h, Control Unit Brand SIEMENS Model 840 D Main Drive Spindle motor power 37 kW Number of axis 4 Movement X-Axis Movement 1200 mm Y-Axis Movement 1000 mm Z-Axis Movement 1200 mm Tools Number of index 320 Type of tool holder SK50 Doln Ugswg Igrsu Nokl Additional Equipment Magazine Capacity: 32 Euro pallet spaces for raw material Pallet Size: 630x800 mm Pallet Spaces: 32 This 4-axis HULLER HILLE NBH 230 horizontal machining center was manufactured in 2009. Ideal for precision engineering, it offers robust construction and reliable performance. Consider the opportunity to buy this HULLER HILLE NBH 230 horizontal machining center. Contact us for more information. Application Types Milling

Condition: excellent (used), Year of construction: 2016, TOX press fine press FinePress PFL Pressotechnik used, functional. Year of manufacture approx.: 2016 Serial no. 279213 Deln Uovwb Tzogu Nekl The machine package includes - Accessories as per photos (Dimensions approx. LxWxH in cm: 120x120x230) Pressing force: 4 kN Total stroke: 80mm Weight: 185kg

Year of construction: 1979, Condition: used, Additional title: wort cooler Capacity: 150 hl/h Pressure: 6 bar Max. temperature: 100 °C Length: 2550 mm Width: 900 mm Height: 2000 mm Weight: 1080 kg Material: stainless steel Base construction: on frame Features: 2-stage, connection widths: DN65 (wort, water) and DN80 (ice water) Periphery: wort aeration, mixing pump, booster pump (water), Dkoln Ugusvcqtzs Nol

Condition: good (used), Code: 0344 Brand: VALENTINI MACCHINE - ITALY Model: 25/13 Pneumatic clamp desk for drawers, wooden elements , strip panels and various materials Dkjln Ugsu Tufweu Nol Technical data: Work table dimensions mm 2500 x 1300 Work table height mm 720 N° 7 positionable pistons with adjustable stroke N° 8 positionable support squaring Compressed air 7 atm Overall dimensions mm 2500 x 1300 x 920 h Weight kg 980

Condition: used, Features: 1 NH3-separator, 2 cooling compressors, 1 evaporative condensor, 1 control cabinet Dkolnevcqzro Ugu Nel

Condition: used, Year of construction: 1995, Additional title: vertical tank Volume: 64 hl Operating pressure: 3 bar Operating temperature: 30 °C Width: ca. 1.300 mm Height: ca. 4.000 mm Material: stainless steel Doln Ujvcqwmogu Nskl Position: vertical Base construction: 3 feets

Condition: used, Year of construction: 2008, Capacity: 360 Bo/h Filling points: 6 pieces Voltage: 230 V Compressed air: min. 6 bar Length: 1590 mm Width: 700 mm Height: 1875 mm Formats: 0.33 L, 0.50 L, 0.7 L, 0.75 L, 1.0 L, 2.0 L, 3.0 L, 5.0 L Base construction: Steel rack Dkeln Ugusvcqhrs Nsl Features: inlcuding add-on parts, filling programm modifiable

Year of construction: 1983, Condition: used, Yeast cultivation with dampable wort sterilization tank designed for an operating pressure of 2 bar and a capacity of 2.47 hl, a second heatable and coolable wort sterilization tank designed for an operating pressure of 2 bar with a capacity of 12.7 hl, and a yeast propagation tank with a capacity of 55 hl, permissible operating pressure of 2 bar and jacket cooling in the lower third (without cone). All tanks are equipped with an agitator. Also includes a CIP tank. The plant is controlled via a Steinecker control cabinet (time-controlled). The tanks are also available individually Additional title: with switch cabinet and CIP tank Features: 2 tanks for wort sterilization with stirring unit (approx. 2,4 hl and approx. 12,7 hl), control cabinet, 1 cylindro-conical tank with stirrig unit, CIP system Deln Ugevcqt Uju Nskl