Used Valtra/Valmet 6250 Hi-Tech for sale (144,183)

Condition: used, Technical data IFE cascade screens (vibrating waste screens): Manufacturer IFE Aufbereitungstechnik GmbH, Austria Type SM 2400 x 5000 F - UW30 Year of construction 2009 Drive motor 22 kW Rated current 43 A Screen dimensions overall 5,000 x 2,400 mm (l x w) Fpob E Ineu Tg Rre Iyog Dimensions of individual sieve segment 950 x 800 x 130 mm (l x w x d) Screen hole grid 150 x 125 mm Length of screen fingers (steel tubes in front of the screen segments) 400 mm Swing width max. 18.5 mm Weight approx. 6,600 kg Possible applications: The waste screen is suitable for use in plants for sorting household waste, commercial and industrial waste, paper and cardboard, scrap metal and electrical waste. Blockage-free screening with the most difficult feed materials, with high throughput capacity, no pigtail formation with oversize particles, loosened oversize particle discharge over the entire screen width and no downtimes for screen cleaning are the greatest advantages of this plant technology. Remark: The screen plates / screen segments have been covered with steel plates without a screening function over the course of time for use in the paper sorting system. The steel plates are only attached and can be removed again. Remarks on the overall layout: Technical documentation for the machine is only available in German. An inspection of the machine is possible by arrangement. We do not accept any liability for the technical data or any errors.

Condition: excellent (used), Year of construction: 2015, operating hours: 16,000 h, Haas Drum Chipper 90kw Machine is ready for immediately use Four infeed rollers Two Knives one anvil, also spare knives and anvils Spare knives holder Fsb E Ijvxutden Iyepg 600mm wide shaker infeed

Condition: used, Year of construction: 2004, operating hours: 13,115 h, Field of application: Construction Make of engine: HINO Lifting capacity: 70.000 kg Serial number: HY235 Production country: JP Please contact Arco Boer for more information 70T Crawler crane IHI CCH 700 from 2004 30 meter boom Fsb Eswazfuj In Iyepg Hookblock & Jibball Hino powered In very nice condition, well mainteained 70T crane.

Condition: good (used), power: 235 kW (319.51 HP), fuel type: diesel, color: orange, Year of construction: 2022, operating hours: 8,728 h, Equipment: air conditioning, General information Field of application: Construction VIN: T04344 Serial number: HCMJAC91V00052056 Technical information Track width: 65 cm Empty weight: 47.000 kg Make of engine: Isuzu Functional Bucket capacity: 2,2 m³ Condition Technical condition: good Visual appearance: good Other information Emission level: Stage II / Tier II Delivery terms: EXW Transport dimensions (LxWxH): 12,05x3,34x4,66 Febowfzvde E In Iyopg Production country: JP Additional information Please contact Francisco Pinto, Jeroen Heindryckx, Bart Apers or Matthias Eyckmans for more information *It will be sold with standard digging bucket, hence grapple not included

Condition: good (used), Year of construction: 1993, operating hours: 500 h, Functionality: fully functional, machine/vehicle number: HR7, power: 22 kW (29.91 HP), Wood Chipper, Shredder, and Chipper Manufacturer: Gräf Maschinenbau GmbH Type HR 7 Serial No.: 0108 Year of manufacture: 1993 Motor: 22 kW Fpeb E Iswbgx Aen Iysg Dimensions: approx. L: 165 cm, W: 140 cm, H: 166 cm Wood inlet opening: approx. 42 x 60 cm

Condition: new, Year of construction: 2025, - Dimensions 600 x 3,000 mm Fpeb E Iju Rpibsn Iyjg - M 56 conveyor chain with protective rollers and MS flights - 2.2 KW SEW gear motor for the feed chain drive - Automatic centering of the logs to the center of the rotor - Dimensions 1,500 x 4,500 mm - Machine for 6 - 35 cm logs - 18.5 KW drive motor for the rotor - 4 pre-cutters - 4 main cutters - each with hydraulic pressure system - 1 pair of centering rollers in front of the rotor - 1 centered pair of rollers after the rotor - 4 KW SEW geared motor for driving the rollers - 30 m/min feed speed - 1 pair of non-driven rollers in the pull-out

Year of construction: 2013, Condition: used, We offer you a used PET bottle crusher of the manufacturer BOREMA, type R-1200 F, year of construction 2013, for residual emptying, deaeration and pre-compaction of the fed PET bottles, from 0.3 up to 2.5 l content. The machine has a chassis and can be moved into and out of the feed chute of your baler. The machine has a throughput capacity of approx. 85,000 bottles/h, corresponding to approx. 3t/h. Fpob E Inou Thpns Iyjg We have the following technical information: Manufacturer: BOREMA Umwelttecjhnik AG Type: R-1200 F (with trolley for retracting and extending) Year of manufacture: 2013 Drive power: 11 kW Connected load: 15 kW Rated current: 32 A Back-up fuse: 40 A Type of construction: Continuous system Function: Double rotor press system Rotor pretension pneumatic: approx. 16t Overload protection: by anti-blocking system Input material: PET disposable and returnable empty bottles 0.3 to 2.5 L capacity Input material: HDPE bottles and canisters up to 3 l capacity Throughput capacity: approx. 3 t/hour, corresponding to approx. 85,000 bottles/hour, depending on size Required compressed air output: G1/2", 8 bar, 40 l/min. Compression ratio: 1:3 Flange dimensions inside: 972 x 1220 mm Feed opening: 565 x 1280mm Weight: approx. 2500kg Possible applications: Due to the chassis, the PET flattener can be moved into the feed chute of your baler as required, thus ensuring residual emptying, venting and pre-compaction of the fed bottles and canisters. When the material is changed, the PET flattener is simply moved out of the feed chute again and paper, cardboard, film, etc. can now be pressed further without using the flattener. Process of the BOREMA PET crusher: The plastic packages are drawn in by two rotating shafts. One of the rotating shafts is pneumatically pretensioned by two air bellows and presses the PET bottles with 16 t of pressure against the second rotating shaft. In the process, the closed plastic bottle is squeezed together, caused to burst and vented. Residual liquids run out and the material falls into the baler in a precompressed state. When impurities are introduced, the pneumatically pre-tensioned shaft deflects to the side and the impurities are channeled through. Significant advantages compared to conventional PET perforators with punching mandrels or knives: The BOREMA process is much more efficient and less subject to wear than conventional PET perforators with punching mandrels or knives. The biggest advantage is that any foreign matter such as metal parts, stones, bottles with frozen contents and pieces of wood are passed through the pneumatically deflecting rotor shaft without stopping the operation of the system or causing any major damage. With conventional perforators, mandrels or blades sometimes break off or become so jammed with the interfering material that the plant has to be shut down and repaired at great expense. Comments: The crusher is in good condition, was dismantled from the running operation, stored, is available at short notice and after assembly immediately ready for use. The documentation (manual, CE, electrical/hydraulic circuit diagram) is complete. An inspection is possible by arrangement. The technical information is taken from sales brochures, the operating instructions or other information provided by the manufacturer. We accept no liability for incomplete or incorrect data and informations.

Condition: new, Functionality: fully functional, overall weight: 26 kg, load capacity: 4 kg, arm reach: 541 mm, Brand new NACHI MZ04D robot. Specifications: Maximum reach: 541 mm Payload capacity: 4 kg Number of axes: 6 Repeatability: ±0.02 mm Body protection rating: IP40 (IP67) Upper arm protection rating: IP40 (IP67) Cleanroom rating: ISO Class 4 Hollow wrist or arm: Hollow wrist Mounting options: Floor, Inverted, Wall, Tilted Weight: 26 kg Fpeb E In Ievrc Amsyog

Condition: new, Year of construction: 2021, Functionality: fully functional, The Z-shaped conveyor belt with plastic slats is for sale. A WhatsApp video of the belt is also available upon request. Infeed: 600 mm Grade: 1900 mm Discharge: 500 mm Usable width: 300 mm Fpsb E Iowbm Tton Iyeg Discharge height: 1400 mm - 1600 mm Constant belt speed: 3 m/min Mobile Tread height: 50 mm every 380 mm

Condition: good (used), power: 235 kW (319.51 HP), fuel type: diesel, color: orange, Year of construction: 2023, operating hours: 6,035 h, Equipment: air conditioning, General information Field of application: Construction VIN: T04397 Serial number: HCMDDE92T00045321 Technical information Track width: 65 cm Empty weight: 35.600 kg Make of engine: Isuzu Functional Bucket capacity: 2,2 m³ Condition Technical condition: good Visual appearance: good Other information Emission level: Stage II / Tier II Delivery terms: EXW Transport dimensions (LxWxH): 10,97x3,19x3,12 Production country: JP Additional information Fpjb E Ijwfzu Hsn Iysg Please contact Francisco Pinto, Jeroen Heindryckx, Bart Apers or Matthias Eyckmans for more information

Condition: used, Year of construction: 2019, Year of manufacture: 2019 Field of application: Agriculture GVW: 22.000 kg Fsbowa N Uqe E In Iyopg Tipper: Back Metaltech PBN 20. Year: 2019. 9 tons BPW axles. Max weight: 22.000 kg. Max speed: 40 KMH. Airbraked. 1 point hydraulic outrigger. Works on Hydraulic from the tractor. Hydraulic tailgate. Dimmensions inside Mammut backwards kipper: L: 5000 mm. W: 2200 mm. H: 1000 mm. Tyres: 650/55R26.5 40%. German trailer! ID 387. The General Terms and Conditions of Heinhuis are applicable to all adverts, offers and quotations by Heinhuis, all agreements entered into by Heinhuis and the negotiations preceding them. By any form of response you accept the applicability of the General Terms and Conditions of Heinhuis and you declare that you have taken note of these General Terms and Conditions. Our prices are export netto prices.

Condition: new, Year of construction: 2024, max. cutting height 160 mm max. cutting width 600 mm min./max. trimming width 25-300 mm Adjustment times of the widths 0.2-1.0 sec. Feed rate 5-30 (70) m/min. Fpob E Insvdcc Ro Iyog Saw motor 37 KW Feed motor 2.2 kW Electric height adjustment of the top rollers 2 lasers Splitting wedges in the machine Fixed bush Adjusting bush Cutting width display Automatic width adjustment Saw shaft diameter 70 mm Weight 3.500 kg Available at short notice

Condition: excellent (used), Year of construction: 2009, operating hours: 20,536 h, Functionality: fully functional, pressing force: 80 t, bale weight: 600 kg, filling opening width: 1,100 mm, filling opening length: 1,400 mm, bale height: 750 mm, bale width: 1,100 mm, net weight: 16,000 kg, nominal current: 75 A, Technical data baler: Manufacturer Avermann Maschinenfabrik GmbH & Co. KG, Germany Type AVOS 1410-45/80 Year of construction 2009 Operation hours 20,536 hours, as of September 2024 Press power main press 80kN Specific press force 103,9 N/cm² Feed channel 1,400 x 1,000 mm Theoretic cycle time 12 sec Theoretic throughput capacity 300 m³/h Bale size 1,100 x 750 (w x h), the length is variable Drive power 45 kW Connected load 75 kW Tying system 4-fold, vertical, fully automatic Throughput capacity at a bulk weight of 30 kg/cbm approx. 6,0 t/h bulk weight of 50 kg/cbm approx. 10,5 t/h bulk weight of 100 kg/cbm approx. 17,5 t/h Bale weight with a bale length of approx. 1.2 m up to 600 kg, depends on material SPS controller Siemens S7-300 Operating panel pulsotronic Baler dimensions built up 8,610 x 2,400 x 3,835 mm (l x w x h) Transport weight baler approx. 16 t Special equipment: Wear-resistant floor made of HARDOX steel Special press ram for pressing ‘difficult’ materials and loose bulk materials with small grain sizes Control cabinet air conditioning Feb E In Iju Thypeyspg Machine foot elevation 200 mm Remark: Due to a reorganisation of the manufacturing processes within the company, a new baling line is being built in a new hall. The old baling press with conveyor technology is therefore no longer required and is expected to be available for sale at the beginning of 2025. Technical data for the chain belt conveyor: Manufacturer not known Type not known Length of feed belt 5,300 mm Length of ascending belt 12,700 mm Overall height 7,300 mm Useful width 1,200 mm Unfortunately, no further technical data, documentation or drawings are available. Condition of the press system: The entire system is in very good condition and is regularly cleaned and maintained by the operator. The quality of the bales is exceptionally good, as you can see from the photos of the pressed bale goods. Even hard plastics such as plastic crates, PP bucket chains and PE plastic drums were pressed into dimensionally stable bales with the fourfold vertical binding. Tidiness, cleanliness and maintenance of the systems are practised in this company and not just written on the website. Scope of delivery: Avermann baler, type AVOS 1410-45/80, incl. wire drawing stations and bale chute Avermann conveyor belt, type KGF GB 1500 Comments: The documentation (operating instructions, CE declaration, electrical/hydraulic circuit diagram) for the press is available in full. Unfortunately, there is no more documentation for the conveyor belt. Viewing is possible by appointment. We accept no liability for the technical details or any errors.

Condition: used, 5tSWF Krantechnik GmbH Fpsb E In Ijdc A R Teyog

Condition: good (used), power: 125 kW (169.95 HP), fuel type: diesel, color: orange, Year of construction: 2021, operating hours: 2,021 h, Equipment: air conditioning, General information Field of application: Construction VIN: T04462 Serial number: THEDCOLOA00001588 Technical information Track width: 60 cm Empty weight: 21.400 kg Make of engine: Isuzu Functional Bucket capacity: 2,2 m³ Condition Technical condition: good Visual appearance: good Other information Emission level: Stage II / Tier II Delivery terms: EXW Transport dimensions (LxWxH): 9,76x2,39x3,15 Production country: JP Feb E In Iewfzuysyepg Additional information Please contact Francisco Pinto, Jeroen Heindryckx, Bart Apers or Matthias Eyckmans for more information NOTE: -Will be sold with standard bucket hence crusher not included.

Condition: used, fuel type: diesel, Year of construction: 2019, operating hours: 1,533 h, Year of manufacture: 2019 Field of application: Construction Drive: Track CE mark: yes Price: On request Fob Ejwa Nx Aj In Iyepg Red Rhino 7000. Year: 2019. Hours: 1533. CE Machine. Deutz engine. Pads: 300 mm (steel). belt. Remote Control. 700x400 mm. Jaw crusher. UC: 80%. ID NR: 167. The General Terms and Conditions of Heinhuis are applicable to all adverts, offers and quotations by Heinhuis, all agreements entered into by Heinhuis and the negotiations preceding them. By any form of response you accept the applicability of the General Terms and Conditions of Heinhuis and you declare that you have taken note of these General Terms and Conditions. Our prices are export netto prices.

Year of construction: 2024, Condition: new, - 260 mm cutting height - 750 mm cutting width - 5-30 m/min stepless feed - 2x75 sawing motors - 3 KW feed gearbox - 70 mm soindle diameter - 400 mm sawblade diameter - 5000 Kg weight Fpob E Inevdahwj Iysg

Condition: excellent (used), Year of construction: 2023, operating hours: 1,851 h, Functionality: fully functional, pressing force: 70 t, bale weight: 500 kg, filling opening width: 1,100 mm, filling opening length: 1,400 mm, bale height: 750 mm, bale width: 1,100 mm, overall weight: 17,000 kg, oil tank capacity: 70 l, Technical data baler: Manufacturer Avermann Maschinenfabrik GmbH & Co. KG, Germany Type AVOS 1410 BS-22/50 Year of construction 2023 Pump operation hours 1,851 hours, as of July 24 Press power main press 70 t (a 70 tonne hydraulic cylinder is installed, special equipment) Specific press force 90,9 N/cm² (a 70 tonne hydraulic cylinder is installed, special equipment) Feed channel 1,400 x 1,000 mm Theoretic cycle time 13 sec Theoretic throughput capacity 266 m³/h Bale size 1,100 x 750 (w x h), the length is variable Drive power 22 kW Connected load 65 kW Tying system 4-fold, vertical, fully automatic Throughput capacity at a bulk weight of 30 kg/cbm approx. 5,5 t/h bulk weight of 50 kg/cbm approx. 7,5 t/h bulk weight of 100 kg/cbm approx. 9,7 t/h Bale weight with a bale length of approx. 1.2 m up to 500 kg, depends on material SPS controller Siemens S7-1500 Operating panel Schneider Harmony Baler dimensions built up 8,610 x 2,400 x 3,835 mm (l x w x h) Feb E In Isu Thbxjyopg Transport weight baler approx. 17 t Special equipment: Wear-resistant floor made of HARDOX steel Larger main hydraulic cylinder with 70 tonnes of pressing force Special press ram for pressing loose bulk materials with small grain sizes OptiCut XS system for lower cutting forces and higher throughput rates Special pressing piston for pressing "difficult" materials Technical data for the conveyor belt: Manufacturer Avermann Maschinenfabrik GmbH & Co. KG, Deutschland Type KGF GB 1500 Year of construction 2023 Drive power 4.0 kW Belt speed approx. 0.3 m/second Length feeding conveyor 2,679 mm Length elevating conveyor 6,866 mm Length goose neck 1,272 mm Grade 35° Effecting width 1,400 mm Side wall height 800 mm Carrier height 50 mm Carrier distance 750 mm Belt quality EP 400/3, 3:1 (DIN quality N) Overall height 4,515 mm Overall transport dimensions11,148 x 2,502 mm (l x w) Technical data on the non-contact personal protection system: Manufacturer BOREMA Umwelttechnik AG, Switzerland Type APSS iBOR 22 Year of construction 2023 Condition of the press system: The entire system is in very good condition due to the short operating time of only 1,851 pump hours and the processing of only paper, cardboard and film. Scope of delivery: Avermann baler, type AVOS 1410 BS-22/50, incl. wire drawing stations and bale chute Avermann conveyor belt, type KGF GB 1500 BOREMA personal protection system, type APSS iBOR 22 Comments: The documentation (Manual, CE-declaration, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: used, for manual drilling machines for stone, wood, and a few for metal Fpob E In Iohagt Soyeg

Condition: new, Year of construction: 2024, working width: 600 mm, saw blade bore: 70 mm, max. cutting height 160 mm max. cutting width 600 mm feed 5-30 m/min. Saw motor 55 KW Fjbsvcn D Rs E In Iyspg feed motor 2,2 kW max. saw blade insert at 145 mm 6 Saw shaft diameter 70 mm CE compliant design Control cabinet and control panel Weight 3,200 kg Special equipment - Electric height adjustment of the feed rollers

Year of construction: 1998, Condition: used, Technical details: profile width: 50 mm work height max.: 950 mm interface: RS 232 Pinout Window profile processing machine for materials such as plastic, aluminum and wooden windows in a continuous process. The materials are conveyed by a pneumatic transport and clamping system. The system consists of two work stations (machines), an electrical control cabinet, and a control panel and transport units. As well as columns with transport system vibrator, chip transport unit and column with receipt printer. Our photos are first taken from the location and then further pictures are how the plant is stored in our stock ready for transport. Workstation no. 1 (machine 1): -sawing station with saw blade Ø 400 x 4,5mm -drilling unit with clamping cartridge (vertical upwards) -drilling unit with clamping cartridge (hotizontal) Febsu Ibuwj E In Iyopg -Boring with clamping cartridge (vertical down) -twin drilling unit with clamping cartridge (vertical down) -45° drilling unit with clamping cartridge (upwards) Working station no. 2 (machine 2): -drilling unit with clamping cartridge (vertical upwards) -milling spindle horizontal with 11 side milling cutters -Drilling unit with clamping cartridge (vertical down) -Drilling unit with clamping cartridge (vertical upwards) -Drilling unit with clamping cartridge horizontal 2 transport units: motor driven -LxWxH: 5.650 x 2.400 x 1.000mm -track width 1.980mm 2 pieces transport units: motor driven -LxWxH: 2.150 x 2.750 x 1.050mm -track width 2.300mm *

Condition: used, Technical details: x-travel: ca.1000 mm y-travel: 400 mm z-travel: 420 mm control: Siemens Sinumerik 805/810 thread cutting up to max.: M 22 bore capacity in St 60 - full boring: 25 mm milling area: Leistung in St 60:150 mm sawing stroke: ca. 55mm mm range of revolutions per minute - continous: 20-6000 U/min Number of working hours: manual 26180 h tool turret: 12 Plätze/places tool taper: SK 40 total power requirement: 18 kVA weight of the machine ca.: 5,0 t machine dimensions LxWxH: 2,9x2,5x2,8 m transport measurements machine: 2,4x2,6x2,75 m Equipment: - special equipment/device ( modulating clamping system) for milling jobs of profile materials with an automatic longtitudinal cutting to length device for workpieces via circular saw module. (without functionality) - hotrizontal tool clamping ( force fitted) with vise clamping system and parallel ledges.(momentarily approx. 80mm) - tool changer type Chiron - basket tool changer - tool clamping mechanically locked, infeed force 5000N - swarf conveyor make Knoll - loading and unloading system FMB LM RP 3000 The machine is not fuctional. On sale as is for a small budget Febju Idnmj E In Iyopg i.D. *

Condition: used, different typesmore information under Download Fob E Isdc A Rqon Iyjpg

Condition: used, different types available Fsb E In Isdc A Sboyspg

Condition: used, different types (250 kg + 500 kg) Fob Ejd Dv R Ie In Iyopg