Used Barford Sxr 3000 for sale (6,698)

Condition: used, table length: 1,000 mm, table width: 1,000 mm, installation height: 2,000 mm, overall weight: 3,500 kg, stand width: 1,260 mm, input voltage: 400 V, Offered is an older, but functional 4-column press. (Condition as shown in the pictures.) The lifting table moves from the bottom to the top. Unfortunately, the pressing force is unknown, and it's not stated anywhere. However, due to the robustness of this press, it is likely to be in the tens of tons. Dimensions: Height approx. 2000mm Table size approx. 1000x1000mm Max. distance between upper and lower platen approx. 460mm Fjb E Sjv Nv Rxedxvogb Height from floor to lower platen (floor height) approx. 1090mm Width approx. 1260mm Weight: Press stand estimated at 3000-3500 kg Weight: Hydraulic unit estimated at 500 kg Shipping conditions: EXW We can assist with loading; a suitable forklift is available. We are also happy to recommend a freight forwarder; please contact us. The buyer/operator is responsible for the operational safety of the machine. As is usual with used machines, any warranty (liability for material defects) is excluded. All information is provided to the best of our knowledge and belief. We reserve the right to make errors.

Condition: repair required (used), Year of construction: 2008, DEVICE MODEL SKORPION 650 EB Dimensions (length x width x height) [mm] 3000 x 1620 x 1400 (+600)* Weight [kg] 4555kg 4 cutting + 1 supporting Inlet dimensions (width x height) [mm] 650 x 250 Cutting drum diameter [mm] 600 Cutting drum speed [rpm] 500 (3.4 knives on the drum) Feeding method belt conveyor Main engine power [kW] 110 Feeding motor power [kW] 2 pcs. x 4.0 Engine power at the receiving conveyor [kW] 2.2 Fsb E Sdewhb U Eoxvsgb

Condition: used, mileage: 129,300 km, power: 221 kW (300.48 HP), first registration: 02/2014, overall weight: 26,000 kg, fuel type: diesel, color: orange, axle configuration: 6x2, maximum load weight: 12,280 kg, empty load weight: 13,720 kg, wheelbase: 4,200 mm, brakes: engine braking, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: steel-air, loading space length: 6,050 mm, Equipment: ABS, air conditioning, crane, cruise control, differential lock, low noise, onboard computer, soot filter, trailer coupling, Mercedes- Benz Arocs 2630 6X2 flatbed with building materials crane DATED: 02/ 2014 only 129.300 KM with receipts !!! Euro6 emission class short cab MercedesPowerShift automatic transmission air conditioning Trailer coupling with hydraulic connection for tipper 6X2 axle formula Rear axle air suspension 3rd axle steerable and liftable Tires 315/80 R22.5 Profile approx. 60% Wheelbase 4200mm Platform 6050mm 1000mm Drop sides Unladen weight 13.720KG Crane Atlas 165.2 Fsbevik Apo E Sdxvegb Year of construction 2013 Operating hours 2838 Top seat control (top seat control) incl. rotator incl. tongs 2 point supports 2 hydraulic extensions 5.50m/ 3000Kg 8.10m/ 1950Kg 10.80m/ 1450Kg German vehicle from 1st hand in a well-kept condition. export/ net price: 47.900 Euro All information without guarantee, errors excepted.

Condition: like new (used), Year of construction: 2023, operating hours: 4,980 h, Functionality: fully functional, punching force: 165 t, sheet thickness (max.): 6 mm, TruPunch 1000 Large Format (S19) including automated loading and unloading - Brush table - MultiTool function - Thread forming function with thread counter - Marking/fast beading function - Deburring and rolling technology function - Adaptive stroke calibration function - Die spray lubrication - Smart Punch Monitoring - Left part flap - Left part conveyor belt - Left part conveyor belt collecting tray - Part chute sensor - Right part conveyor belt - Additional clamping claw - Individually opening clamp - Height-adjustable clamping claw - Automatic clamp closing Loading sensors - DeltaDrive repositioning device - Vibration-damped installation - Chip conveyor with tilting container - Machine status light - Warping detection - Wireless Operation Point SheetMaster Compact (3000x1500) (AK05) loading automation - Loading station with spreader magnet for sheet separation - Suction cup frame - Vacuum sensors - Double sheet detection - Unloading cart for scrap skeletons and microjoint sheets - Compact setup with light grid and HZP Fob E Sowg Tp Eedxvogb - Peeling system SortMaster Compact unloading automation for good parts - Machine-integrated automated small parts removal - Suction cup frame for unloading good parts up to 600 x 400 mm (X x Y) - 2 suction cup bars (each suction cup can be controlled individually) - Vacuum sensors for the suction cup circuits - Expansion of the unloading area to 1200 x 800 mm - Light grid Without Tools and tool cassettes. Machine is running and can be inspected at any time. Drives ON: 4,980 hours Machine Running: 3,350 hours Last maintenance 06/2024.

Condition: new, MOBILE CONCRETE BATCHING PLANT M100-TWN Crsbtuhmoflz Hle N Aeb GENERAL Plant Type : MOBILE Concrete Plant with TWIN SHAFT MIXER Plant Capacity : 100m³/hour freshly compressed concrete Mixer Capacity : 3000/2000 lt (2m³ Compressed Concrete) Total Motor Power : 143kw Standard Value can be changed depending on Equipment.. Voltage/Frequency : 380V/50Hz Standard Value. The installation and startup of the plant is under our responsibility. We provide excellent after-sales service. 24/7 SERVICES. REMOTE CONTROL SERVICE. Exporting more than 1000 Concrete Batching Plants to more than 90 Countries all over the world. * HIGHLY EFFICIENT AND DUPLICATE PRODUCTION * EASY TRANSPORTATION * MINUMUM INVESTEMENT FOR FIELD GROUNDWORK * QUICK INSTALLATION DETAILS: Compacted concrete capacity: 100 m³/h Air Compressor Capacity : 950 lt/min Fgjb Eowhxk Rj Sdxvsb Aggregate Hopper : 4 Bins : 4×11.25 = 45 m³ Mixer Type : TWIN Shaft (2 m³). 3000/2000 lt capacity Mixer Converyor Band : 1000 mm * 13000 mm Weighbridges: Aggregate/ Cement /Water/ Additives

Year of construction: 1973, Condition: ready for operation (used), A complete cut-to-length line (coil line) for sheet metal processing, specifically for coils, is available. Product information: Material: stainless steel strip, max. strength at 2mm thickness: approx. 70kp/mm², max. elongation at 70kp/mm²: 50%, strip width range: 100mm-500mm, strip thickness range: 0.3mm-2.5mm, sheet lengths: 250mm/1000mm/4000mm/10000mm, strip speed range: 7.5m-30m/min, hydraulic operating pressure: approx. 80bar, pneumatic operating pressure: approx. 4bar, clarification sheet length: over 250mm: Feed and shear adjustment, over 1000mm: with mechanical intermittent operation, over 4000mm: with electrical on/off operation. 1) Decoiler, max. outer coil diameter: 1400mm, inner coil diameter: 400mm/500mm/600mm, decoiler drum spreading range: 370mm-620mm, spreading cylinder diameter: 125mm, spreading cylinder stroke: 40mm, spreading segment useful width: 600mm, max. strip weight: approx. 3000kp, max. strip tension: approx. 400kp, decoiler displacement: +/-100mm. 2) Kohler straightening machine, straightening roller diameter: 30mm, bale length: approx. 600mm, number of straightening rollers: 21, feed rate: 7.5m-30m/min, strip width range: 100mm-500mm, strip thickness range: 0.3mm-2.5mm. 3) Flying hydraulic shears, material/strip thickness/speed: to suit the system, number of cuts: 30 cuts/min, sheet length range: 250mm-1000mm, blade width: 600mm. 4) Conveyor belt, belt width: 600mm, center distance: 3500mm. Documentation available. On-site inspection is possible. Fjb E Sdowgngfjxvjgb

Condition: used, Year of construction: 2003, Used machine Year of construction 2003 automatic height and swivel adjustment of the spindle with decimal pulses Mechanical display of spindle height and electrical display of swivel adjustment Hinged cover with aluminum guides adjustable opening of the table top via table slide System for quick tool changes with long tables with extendable workpiece support Fob E Sdeuzn I Dexvegb Table size 2500 x 780 mm Spindle adjustment - 45° to + 45 ° Spindle diameter 30 mm Spindle stroke 230 mm max. table opening 300 mm motor 5.5 kW with automatic star-delta start with right-left rotation speeds 3000/4500/6000/8000/10000 rpm Electronic programming of spindle height, spindle swivel and stop position (milling stop) Extraction top+bottom 120 mm Dimensions 2570 x 1450 x mm Weight approx. 670 kg Availability: short term Storage location: Flörsheim

Condition: excellent (used), Year of construction: 1978, used, good condition Make Mayer Type FSK Year of manufacture 1978 Motor 2.2 kW Cutting length 3000 mm Saw blade diameter approx. 170 mm Pneumatic tension Parallel stop Fgsb E Sdxevlzraevjb Front support table Rear support table Extraction channel Pneumatic maintenance unit Extraction connection D 100 mm Space requirement approx. LxWxH mm 3900 x 1200 x 1300 Weight approx. 450 kg Total connected load approx. 2.2 kW Chassis Location: From warehouse 54634 Bitburg Handed over in the current condition as viewed - free loading -

Condition: used, mileage: 129,300 km, power: 221 kW (300.48 HP), overall weight: 26,000 kg, fuel type: diesel, color: orange, axle configuration: 6x2, maximum load weight: 12,280 kg, empty load weight: 13,720 kg, wheelbase: 4,200 mm, brakes: engine braking, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: steel-air, loading space length: 6,050 mm, first registration: 02/2014, Equipment: ABS, air conditioning, crane, cruise control, differential lock, low noise, onboard computer, soot filter, trailer coupling, Mercedes- Benz Arocs 2630 6X2 flatbed with building materials crane DATED: 02/ 2014 only 129.300 KM with receipts !!! Euro6 emission class short cab MercedesPowerShift automatic transmission air conditioning Trailer coupling with hydraulic connection for tipper 6X2 axle formula Rear axle air suspension 3rd axle steerable and liftable Tires 315/80 R22.5 Profile approx. 60% Wheelbase 4200mm Platform 6050mm 1000mm Drop sides Unladen weight 13.720KG Crane Atlas 165.2 Year of construction 2013 Operating hours 2838 Top seat control (top seat control) incl. rotator incl. tongs Fob E Sdxjvik Aijvjgb 2 point supports 2 hydraulic extensions 5.50m/ 3000Kg 8.10m/ 1950Kg 10.80m/ 1450Kg German vehicle from 1st hand in a well-kept condition. export/ net price: 47.900 Euro All information without guarantee, errors excepted.

Condition: used, Year of construction: 1987, Used machine Year of construction: 1987 Machine workshop checked Table size 1100 x 760 mm motor 4,7/5,7 kW pole-changing with clockwise/anticlockwise rotation Milling arbor MK 5/ 30 mm Fsb Est Hagzj Sdxvogb Height and swivel adjustment via handwheel Speeds 3000/4500/6000/9000 rpm Swivel range of the milling arbor - 5 to + 45 ° Milling stop with metal jaws Mounted on round insert plate and can therefore be rotated through 360 with table extension on both sides with extendable frame support with 4-roller feed unit Weight approx. 900 kg Pictures show machine in not yet overhauled condition Availability: approx. 4 weeks after order placement Storage location: Flörsheim

Condition: new, Year of construction: 2025, Mandrel-free pipe bending machine RB 54 - NC-controlled, with large program memory Article number: 4300054 NC control for setting the bending angle Up to 50 programs can be saved High-quality, robust design Fast tool change Purely motor drive Automatically returns to the starting position TECHNICAL DATA General information Bending radius max. 162mm Fjb E Sevk Scgodxvsgb Bending angle max. 210° Bending speed(s) 2rpm Torque 2341Nm Dimensions and weights Length (product) approx. 600mm Width/depth (product) approx. 220mm Height (product) approx. 470mm Weight (net) approx. 107kg Bending performance Bending performance of pipe material 420 N/mm² (Ø x wall thickness) 54 x 4mm Bending performance of pipe material 350 N/mm² (Ø x wall thickness) 54 x 4mm Bending performance of pipe material 650 N/mm² (Ø x wall thickness) 42 x 3mm Electrical data Drive motor power 1.1kW Connection voltage 400V Mains frequency 50Hz Location: from stock - available immediately -

Condition: new, Year of construction: 2022, New machine Fgobskwhk Ss E Sdxvsb Year of manufacture 2022 Scope of delivery: Table widening Rubber rollers with veneer edge grinding device with contact shoe with fine ice setting and stop rulers with grooved infeed ruler for veneer overhangs quick changeover from veneer edge sanding to solid wood sanding possible length (product) approx.: 1900 mm width/depth (product) approx.: 900 mm Height (product) approx.: 1350 mm Weight (net) approx.: 290 kg Power oscillation motor: 0.25 kW Suction nozzle diameter: 140 / 100 mm Height adjustment longitudinal table: 230 mm cross table height min.: 720 mm working table length: 960 mm working table width: 350 mm Working table height adjustment: 230 mm 400: Supply voltage V Phase(s): 3 Ph type of current: AC Mains frequency: 50 Hz grinding belt length: 3000 mm grinding belt width: 200 mm belt rotation speed(s): 20 m/s oscillation stroke: 20 mm grinding surface length: 1050 mm grinding surface width: 200 mm incl. 1 VE abrasive belts K 80 1 VE abrasive belts K 120 Availability: short term Storage location: Hochheim

Condition: excellent (used), Year of construction: 2018, Holzkraft LLB 16 H - Long hole drilling machine The long hole drilling machine with swiveling drilling support. Large-dimensioned work tables of the long hole drilling machine are made of gray cast iron, making them robust and permanently flat Drill support is mounted on hardened prism guides with ball contact system Wescott drill chuck as standard Dowel device with grid division can be retrofitted at any time Robust steel/gray cast iron construction For both clockwise and counterclockwise use Dowel device - zero position in the middle of the grid bar of the dowel device Accessories: Long hole drill set 5-piece. in a wooden case Model LLB 16 H Technical data Work table dimensions 500 x 200 mm Drilling width 200 mm Drilling depth 150 mm Drill head height adjustment 150 mm Drill head tiltable - Wescott drill chuck 0-16 mm Speed 3000 rpm Motor power 400 V / 50 Hz / P 2 1.1 kW (1.5 HP) Suction nozzle diameter - Weight 120 kg Dimensions 560 x 740 x 1320 mm Fob E Sevkychsdxvegb Location: from stock 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2023, New machine Year of construction 2023 Equipment and technical data: - Solid German machine construction - Professional slot milling and precise dowel drilling Fixed table, smooth-running mobile drill motor - Travel device for greater mobility - Cast iron table 700 x 380 mm thick-walled and highly ribbed - 2 manual eccentric clamps with solid steel columns for clamping the workpieces - Smooth-running cross support with adjustable ball guides for lateral and depth adjustment - 2-lever operation - Height adjustment via handwheel and scale, drilling depth stop via scale, drilling length limit adjustable via left and right side stops - Drill motor power 1.3/1.7 kW, pole-changing, speed 1500/3000 rpm with mechanical motor brake and practical tool tray - incl. emergency stop button - High-precision two-jaw drill chuck with protective sleeve, clamping range 1-20 mm - Dowel drilling device for drilling holes in rows with 16, 22, 25 and 32 mm raster roller high-precision milled raster, fixed via spring-loaded raster bolt - Plug-in frame stop with index bolt for the positions: center, left, right Mitre fence, plug-in with index bolt for 45° and 22.5° - Workpiece fence up to 1500 mm for series processing - CE-compliant, GS tested - Max. Drilling depth 145 mm - Max. Drilling length 240 mm - Height adjustment 135 mm - Clamping range 5-20 mm - Motor power 1.3 / 1.7 kW - Voltage 400 V / 50 Hz - Suction nozzle 100 mm Ø - Color RAL 7035 light grey and RAL 5000 violet blue Fjb Eeri U Hde Sdxvjgb Special equipment: - Dial gauge in the handwheel, with 0.1 mm height adjustment display instead of the scale - Single-lever operation with remote locking for longitudinal and transverse movement of the drill motor including loosening and locking of the raster bolt on the dowel drilling device, narrow workpieces can then also be processed from the side of the table - Emergency stop button with key - Safety cover over the drill chuck with electric lock New price with this equipment 12213. Shipping dimensions: 120x80x160 cm Weight: approx. 200 kg Availability: short term Storage location: Hochheim

Condition: new, Year of construction: 2025, Pneumatic double diaphragm pump Cobra 40 -10 Its unique design allows low pulsation operation Uniform ink flow for perfect spray and highest surface quality Ideal for processing shear and moisture sensitive materials Fob Esbuqn Ho Sdxvogb Minimal shear forces - ideal for processing e.g. UV varnishes Ideal for processing small quantities of material and for frequent colour changes Scope of delivery: Basic unit on stand, HD double hose 7,5m, upper container 5l Ex, AirCoat gun AC 4600 Professional including red air cap and holder, Air Coat nozzle ACF 3000 11/40 Technical data: Conversion ratio: 40:1 Volume flow per double stroke: 10 cm3 Flow rate at 200 double strokes: 2 l/min max. Operating pressure: 250 bar Weight: 23 kg Location: 54634 Bitburg At a special price - immediately available

Condition: used, Year of construction: 2018, Used machine Year of manufacture 2018 Basic equipment Electric height and tilt adjustment 0-46° with automatic cutting height correction when tilting Control at eye level, pivoting Double sliding table, table length 3,000 mm Parallel stop, manually adjustable via scale, including manual fine adjustment Cutting width 1,000 mm Angle stop with fixed 90° position, manually adjustable via scale up to 3,200 mm Max. sawblade projection 150 mm Max. sawblade diameter 450 mm Drive power 4 kW (5.5 HP) at 4,000 rpm AKE tool clamping system for the main sawblade Working height 91 cm Productivity package Motor 5.5 kW (7.5 HP) with VARIO F45 - Continuously variable speed control from 2000 - 6000 rpm - Precise speed adjustment to the material increases cutting quality and sawblade service life. Extended cutting height for one-sided tilting This option is equipped with a large extraction hood for a max. sawblade diameter of 550 mm and a max. sawblade projection of 204 mm for one-sided tilting. In combination with a scoring unit, the max. sawblade diameter is 500 mm or 179 mm cutting height. Only in conjunction with a minimum drive power of 5.5 kW (7.5 HP). Two-sided tilting! RAPIDO Plus 3-Axis Scoring Unit With electric height and lateral adjustment, programmable scoring blade height with quick lowering and quick raising, drive motor 0.75 kW (1 HP), 8200 rpm. Retrofitting only possible on machines prepared for a scoring unit. LED Lighting With particularly energy-efficient LED technology, the danger area of the scoring unit is clearly marked. Sliding Table with a Carriage Length of 3000 mm Basic Equipment Sliding Table with a Carriage Length of 3000 mm The Altendorf sliding table is famous for its smooth and precise operation. It can be infinitely locked in any position. The large double rollers, precision-machined from hardened steel, hold the upper carriage in connection with the lower carriage with absolute precision in the respective hard-chrome-plated guide rods. This running quality is maintained even after decades of use and contamination. The carriage is designed as an extremely torsion-resistant and dimensionally rigid multi-cavity system. The table surface is precisely planed and anodized. A hard-chrome-plated round bar, which is positively embedded in the upper carriage, serves as a mount for the cross slide and as an interface for various accessories. The entire unit is low-maintenance and requires no lubrication. DIGIT-L Angle Miter Stop, Cutting to Lengths up to 3500 mm This ALTENDORF-patented stop with integrated length compensation facilitates precise cutting of angles and miters in one function. In both positions, the swivel angle is continuously adjustable by 49° and is digitally displayed. The play-free and robust stop flaps can be easily moved and adjusted as individual flaps over the entire range up to a maximum of 3500 mm. For cutting to lengths up to approx. 1700 mm, the Fgjb E Sdxowb Eitovsb roller-supported, stable telescopic

Condition: as good as new (ex-display), Year of construction: 2025, CASADEI F 25 LL FK - table milling machine with tilting milling spindle and table extensions Table milling machine with tiltable milling spindle from -45° to +45 Sturdy cast steel construction Dynamically balanced milling unit anchored to the work table Particularly robust construction Fjbjdqzcxo E Sdxvsgb Smooth running due to precision aggregates and high dead weight Standard with right-left rotation and electronic blocking when changing direction 5 speeds from 3000 - 10000 min-1 Speed change is easy and convenient from the machine side Standard with MK 4 change spindle system Large work table made of cast iron for long-lasting precision Easy handling due to control elements and speed display on the front of the machine Milling fence with fine adjustment and aluminum fence jaws as standard equipment Powerful industrial motors Equipment details: Fraes fence Fraes fence with crank/handwheel adjustment from the front side With numerical display Interchangeable spindle Interchangeable spindle MK 4 standard on all CASADEI F 23 and F 25 models Option sliding carriage Option sliding carriage for small tenoning operations and for slotting Scope of delivery: Manual tiltable milling spindle from +45° to -45°. Speed indication via LED at the front Aluminum stop jaws Sheet milling protection cover Right-left rotation of the milling spindle MK 4 interchangeable milling spindle Milling fence with crank/handwheel adjustment from the front with numerical display table extension left and right (2500 mm length) extendable workpiece support (2500 mm length) Model CASADEI F 25 LL FK article no. 5220728 Technical data Dimensions work table 2500 x 810 mm Milling spindle tilting range +45 to -45 degrees useful length of spindle at Ø 30-35 mm 140 mm useful length of spindle at Ø 40-50 mm 180 mm milling spindle stroke 90 mm max. tool Ø profiling 250 mm max. tenon tool Ø 350 mm max. milling tool Ø 160 mm max. tool-Ø lowerable 320 x 60 mm speeds, 5-stage 3000/4500/6000/ 8000/10000 min¯¹ motor power 400 V / 50 Hz / S6-40% 7 kW weight 480 kg suction nozzle-Ø stop 1 x 120 mm suction nozzle-Ø under table 2 x 80 mm Location: Ex stock 54634 Bitburg - immediately available -

Condition: used, Year of construction: 2023, Used machine Year of manufacture 2023 Technical specifications: Roller carriage length 3200 mm Roller carriage cutting length 3200 mm Cutting height at 90° max. 155 mm at 46° max. 105 mm Cutting width at the width stop 1250 mm Length stop on the cross slide extendable up to 3500 mm Saw blade diameter max. 450 mm Saw blade diameter (retractable under table) ø 400 mm Table size cast iron table top 1200 x 655 mm Table extension plus 750 x 655 mm Feb E Ssuvab Redxvjgb Table widening 1430 x 940 mm Table height / working height +/- 20 mm 900 mm Motor power 5.5 kW / 7.5 HP Main saw blade speed 3000 / 4000 / 5000 / 6000 rpm Voltage 400 V / 50 Hz Space requirement 7000 x 3500 mm Weight approx. 1150 kg Options: 7.5 kW motor Tele-Digit length stop With central digital, wireless 0.1 mm readout in the low-power system for both stop flaps up to 3000 mm instead of the standard length stop Double-sided miter stop DSG A For angle cuts 0° - 90° on the aluminum sliding table, length and angle measurements adjustable via scale; For cutting to lengths up to 1375 mm with length compensation for preferred angles of 5°, 10°, 15°, 22.5°, 30°, 45°, 60°, and 67.5°. Includes splinter wood, wall mount, and an additional factor scale for easily calculating incorrect miters for different workpiece widths. Swivel device for the cross slide. Quick, ergonomic sliding into the parking position. 2 clamps for trolleys. Current list price: €46,254.- Availability: Short-term. Warehouse location: Hochheim.

Condition: new, Year of construction: 2024, Osama automatic 4-roller glue application machine Type: S4R/P-1400 working width: 1.400 mm max. passage height: 0 - 100 mm Speed: 22 m/min Working height: 890 mm Diameter of the application rollers: 250 mm Motor power: 3 KW Electrical system: 400 V/ 50 Hz/ 3 phases Automatic gluing machine with 4 rollers for polyvinyl acetate (PVAC), urea-formaldehyde (UF) and polyurethane adhesives for various types of materials such as MDF, multilayer, chipboard, composites, plasterboard. With this type of gluing machine we can dose the amount of glue precisely and homogeneously, taking into account the corrugation of the rollers, which must be suitable for the type of production. The heavyweight structure and the core of the rollers, made with higher thicknesses compared to previous models, allow a high production rate without particular problems and the gluing of materials up to 2200 mm wide. Removing the rollers for maintenance is a simple operation as the supports can be split into two halves using a simple bayonet coupling. It is also possible to equip the gluing machine with various accessories, such as the electronic speed controller, the automatic roller washing device and the automatic lifting device of the upper roller with position indicator on the display. The S4R/P gluing machine is used for various types of production, including in the construction sector and in the manufacture of foam boards and mattresses. Equipment: - Automatic roller cleaning - Motorized infeed roller - Motorized outfeed roller - Infeed table TRF 1400 x 3000 mm PVC rollers 60 mm spacing: 200 mm - Outfeed table TDF 1400 x 3000 mm. Disk rollers D: 122 mm stainless steel - Chassis for S4R/P-1400 Location: ex stock 54634 Bitburg Fsb E Sdxsu I R Utevsgb - immediately available -

Condition: new, Year of construction: 2021, CNC machining unit for milling Tool spindle position: 90° Machine connection: Holz Her with HSK 63 F Drilling: 3000 - 9000 rpm Spindle speed: max. 15,000 rpm Fjb E Sdxewb Ehiovjgb Gear ratio i = 1:1.5 Rotation direction: left/right Torque: max. 20 Nm Tool holder: ER32/ER16 Spindle for omega cutters: ER16 Availability: Short-term Storage location: Hochheim

Condition: new, Year of construction: 2024, Panhans swivel milling machine type: 245/20 Fgsb Esr Ig H Ts Sdxvsb Solid German engineering Table milling machine with one-sided swiveling fixed milling spindle for the swivel range from -5° to +45.5° Positioning control for height and swivel adjustment with height zeroing and offset measurement travel Electronic position and speed displays 4 speeds 3000 / 4500 / 6000 / 9000 rpm Quick belt tensioning device Push button for spindle start and stop Left and right rotation Milling cutter quick clamping device Finely planed gray cast iron table with rigid frame support Lower control panel on rigid frame support Milling fence 216 total adjustment via handwheel and LCD display incl. cast fence plates and aluminum splitter tongues Machine socket Lockable main switch Mechanical motor brake Milling protection and pressure device GAMMA V 1629 Arc milling fence 1639 Tapoa Milling spindle 30 mm, non-replaceable CE-compliant GS tested Table size 1100 x 760 mm Table height 870 mm Milling spindle not exchangeable 30 mm Clamping height 140 mm Height adjustment 125 mm Suction nozzle 2 x Ø 120 mm Speed 3000 / 4500 / 6000 / 9000 rpm Color RAL 7035 light grey and RAL 5000 violet blue Net weight approx. 800 kg Equipment: Top control panel Swivel +-45 degrees Motor 7.5 Kw Centerx Extendable frame support Location: ex stock 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2024, New machine Year of construction: 2024 Equipment and technical data: Solid German machine construction for trimming, cutting to length, sizing, mitre cutting etc. - Top operation with control panel positioned at eye level, swiveling, incl. template holder - 7" touchscreen control for electromotive positioning of cutting height, saw blade tilt adjustment, cutting width stop and optionally for height and side adjustment of the scoring saw tool database for 50 saw blades and display of the current speed. - electromotive height and tilt adjustment - saw blade tilt range from 0 47° - APA saw blade quick clamping system - main saw blade speed 3000/4000/5000/6000 rpm - Safety guard can be swiveled to both sides, safety hood with interchangeable wide/narrow insert for saw blades up to Ø 450 mm - Electromotive width stop with cutting width 1250 mm - Roller carriage with cutting length 3200 mm and blocking every 50 mm - Cross slide with support roller and sliding support widening in both directionsLength stop with mm scale and extension up to 3500 mm with 2 sliding hinged stops and 1 hinged end stop End stop can be used simultaneously as an angle mitre fence on both sides, infinitely adjustable from 0-46° with automatic length compensation and locking for 15°, 22.5°, 30°, 45° fixable- Push-button control with electronic soft start (start/stop)- Electronic wear-free motor brake - Cutting length 3200 mm - Cutting height max. 155 mm at 90°, 105 mm at 47° - Cutting width at width stop 1250 mm electromotive- Length stop on cross slide extendable up to 3500 mm - Max. Saw blade Ø 450 mm, saw blade Ø 400 mm can be lowered under the table - Table size of the cast table top 1200 x 665 mm - plus table extension 750 x 655 mm- table extension 1430 x 940 mm - Table height / working height 900 mm- Extraction nozzle 120 mm on machine body, 80 mm on protective hood - Motor power 5.5 kW / 7.5 HP- Electrical voltage 400 V / 50 Hz- Roller carriage, length and width stop profile anodized - Machine body and swivel arm powder-coated Color anthracite RAL 7021Sheet metal protective cover top RAL 5000 violet blue, on machine body RAL 7035 light grey - Space requirement: 7110 x 4150 mm - Weight: approx. 1050 kg depending on version up to 1250 kg - CE compliant, GS tested, BG wood dust tested Special equipment: Fsb E Sdskwhdtoxvogb Incl. scoring unit 0.55 kW electromotive positioning for lateral and height adjustment via LED display and memory function; when the scoring saw is switched on, the unit automatically moves to the set position values; when switched off, the unit automatically moves under the table to a lateral parking position, allowing larger saw blades than Ø 350 mm to be used without removing the scoring saw blades Incl. THREE-PHASE MOTOR FOR THE MAIN SAW WITH 7.5 KW (10 HP) instead of 5.5 kW Incl. Quickstep scoring system: tool-free manual adjustment of the scoring width From 2.8 to 3.8 mm by adjusting the scoring width by 0.05 mm per individual step, incl. 1 set of saw blades 125 x 2.8-3.8 x 50 mm Z =12+12 Incl. SWIVEL DEVICE FOR THE CROSS-SLIT Fast ergonomic sliding into the park position Incl. longitudinal stop with digital display mounted on each stop flap, adjustable to 0.1 mm, max. length 3300 mm Incl. transport pallet

Condition: new, Year of construction: 2024, Holzkraft edge sanding machine Type: KSO 200 F with veneer sanding device Sanding unit can be swivelled up to 45° by means of a lever Machine stand made of welded steel guarantees high torsional stiffness and vibration-free operation. Oscillating sanding belt with separate gear motor for better sanding results Oscillation optionally switchable Sanding soleplate with graphite coating for a longer service life of the sanding belt Height-adjustable sanding table for utilization of the entire sanding belt width Height-adjustable additional table with suction for grinding radii Spring-loaded belt tension automatically compensates for belt length differences. With double suction Extendable roller table extension With rubberized sanding roller Veneer edge sanding device with contact shoe with fine adjustment, relief rollers and stop rulers With grooved infeed ruler for veneer overhangs Fsbelht H Ne E Sdxvegb Quick changeover from veneer edge sanding to solid wood sanding possible Dimensions and weights Length approx. 1900 mm Width/depth approx. 900 mm Height approx. 1350 mm Weight approx. 290 kg Connection dust extraction suction nozzle diameter 140 / 100 mm Drive power oscillation motor 0,25 kW Working table(s) working table length 960 mm working table width 350 mm Working table height adjustment 230 mm Height min. 735 mm Height max. 965 mm Height adjustment longitudinal table 230 mm Cross table length 330 mm Cross table width 330 mm Cross table height min. 720 mm Cross table height max. 900 mm Cross table height adjustment 180 mm Electrical data Power drive motor 3,0 kW Supply voltage 400 V Grinding unit grinding belt length 3000 mm grinding belt width 200 mm Belt speed(s) 20 m/s Grinding surface length 1050 mm grinding surface width 200 mm Oscillation stroke 20 mm Location: Ex stock 54634 Bitburg - immediately available -

Condition: excellent (used), Year of construction: 2020, Fischer Lagertechnik vertical panel racking used Basic bay + add-on bay Fsbeu A Dafe E Sdxvegb Overall height: 2285 mm Outer dimension depth 3000 mm Nominal height: 2160 mm Overall width: 920 mm Basic element Outer width dimension: 440 mm Additional element Access options: one-sided with castors Shelf type: Panel shelf Uprights RAL color: RAL 9010 pure white Mounting: Screw mounting Upright surface: lacquered Location: ex stock 54634 Bitburg - immediately available - Shelf is sold without contents

Condition: excellent (used), Year of construction: 2000, Frank under-radiator grinding machine URS 30 For grinding floor edges, niches, corners, stairs and under radiators. The URS machines are very light, have high motor power and grinding speeds, and therefore they grind very quickly. A built-in electronic starting current limiter ensures that - even with low fuses - there are no starting problems. URS 30 Voltage: 220 volts Motor power: 2.0 HP / 1.5 KW Disc diameter: 178 mm Grinding stone speed: 3000 rpm Attachment projection: 300 mm Attachment height: 40 mm Machine weight: 13 kg with lots of grinding wheels Location: from stock 54634 Bitburg Feb E Sdxovk T Tyevsgb - available immediately -