Used Barford Sxr 3000 for sale (6,745)

Condition: good (used), Year of construction: 2008, Urban PF 3000 / machining center in portal design, Year of construction 2008, Heidenhain iTNC 530 control system, travel X/Y/Z 3210/695/585 mm, Machining center in portal design, Drilling capacity in ST 60 Ø 18 mm, Dcoleu Tptcsqw N E Aog M 16, Spindle speed up to 8,000 rpm, SK 40, Ww 12 times, Table size 3,000 x 700 mm, chip tray, coolant system, electric handwheel, tool length measuring device,

Condition: used, Year of construction: 2024, Rear section Primera DMC 4200 l 1-fold conveyor section Single-shoot distributor heads / f. 16 rows Long loading board for rear section Drawbar with folding support foot / lower linkage attachment Cat. 3 braked axle with parking brake / dual-circuit air brake system Dcjlqw N Esuhnwvs Ajg

Condition: good (used), Standard equipment Dcelop H Ta Djqw N E Ajg - Basic device profile projector Mitutoyo PJ 3000 - Ground glass D 300 mm with clamp for fastening of a radius template - Objective 10x and reflected light mirror - Measuring table with travel ... a) MT X 100x Y 50 mm or 150x50 mm with glass plate - Illumination device for transmitted and reflected light (24V/150W) - Calibration protocol I Instructions D Delivery I Instruction I Factory and Daaks calibration possible

Condition: good (used), Year of construction: 2007, Functionality: fully functional, pressing force: 400 t, throat depth: 520 mm, distance between stands: 3,260 mm, bending length: 4,100 mm, Press plieuse COLLY PS 3000 LS Dcsljvkwhzjqw N E Aog 4000 x 400 tonnes 8 Axes serrage hydraulic haut et bas CN CYBELEC MODEVA 12 S Machine with genius civil Important lot d'outillage

Condition: reconditioned (used), Functionality: fully functional, overall weight: 70,000 kg, total length: 22,200 mm, total width: 5,400 mm, TECHNICAL DETAILS Machine type: drum dryer Delqw N Eevgb A Ie Aecg Year of construction: 2021 (rebuilt) Engine power: 2 x 22 kW (new) Drive chains and sprockets: new Frequency converter: new Oven: 750 kW wood chip oven Air temperature: approx. 90 °C Drying capacity: approx. 1.5 t/h oak wood chips Max. drum temperature: 400 °C (drying capacity correspondingly higher) MACHINE DETAILS Length: 22.2 m Diameter: 5.4 m Segmentation: can be dismantled into 6 parts Discharge: screw conveyor (new)

Condition: refurbished (used), Year of construction: 2025, Functionality: fully functional, spindle bore: 95 mm, turning diameter: 800 mm, turning diameter over bed slide: 800 mm, turning diameter over top slide: 530 mm, turning length: 3,000 mm, The PORĘBA TPK-80/3M universal lathe has been comprehensively rebuilt and modernized, has technical parameters in accordance with the technical and operational documentation DTR of a new machine, WOT technical acceptance conditions and the Polish Standard and also meets EU requirements. The machine is covered by a full 12-month warranty on spare parts and electrical components. Availability: delivery time 3,5 months, starting from the order Technical data: - distance between centers/turning length: 3000 mm - turning diameter over bed: 800 mm - turning diameter over support: 530 mm - turning diameter in bridge recess: 1080 mm - power on compound slide - spindle bore diameter: 95 mm - maximum workpiece weight between centers: 6,000 kg - maximum workpiece weight between centers + 1 steady: 7,500 kg - maximum workpiece weight between centers + 2 steadies: 9,000 kg - number of spindle speeds: 21 - range of rotational speeds (rpm): 8 - 800 - number of feeds: 80 - range of feeds (mm/rev): longitudinal: 0.1 – 12,8 Dcelqw N Esfknw Rs Aog transverse: 0.05 – 6,4 - engine power: 16/22 kW (1st gear / 2nd gear) - overall dimensions: total length: 5000 mm width: 1800 mm height: 1800 mm total weight: 6200 kg Standard equipment: tailstock, coolant pump, tool post, chuck cover Additional equipment available at extra charge: - 3- or 4-jaw chucks, various diameters and variants - Digital readout on 2 axes with assembly and calibration - Steady rest, 40-400 mm, with rollers - Steady rest, 400-600 mm, with rollers - MULTIFIX quick change tool post

Year of construction: 2008, Condition: excellent (used), I sell the press for glulam glued massive wood LISY DVORAK TH6, year 2008. Djlqw N Eokd Drhs Aecg Material size 3000 X 1250 x 50mm 6 working areas, manual rotation. 6 pcs hydraulic cross pressures per 1 area / pomp 1,1 KW 6 pcs manual pressures per 1 area Self weight 1200kg. Glue spreading machine LISY DVORAK NL200 included in price. Very good condition. Available immediately.

Condition: used,

Condition: new, Year of construction: 2025, machine/vehicle number: 648125409, FRUMECAR MODULMIX 3000 CONCRETE BATCHING PLANT year: New capacity: 120 m³/h - 4-5 aggregate hopper / in line - hopper capacity: of 60-120 m³ - Production capacity: 120 m³/h - mixer type: twinshaft mixer - mixer size: 3,0 m³ / 4000 liter - K2 full automatic computer system - electric control system: Siemens S7 - diameter cement screw: 273 mm - cement silo: 1-4 - international assembly included - 2 years guarantee from startup - winter housing possible Delqw N Eohd Na Re Aecg This offer is subject to change, input errors and mistakes. Valid are only the specific agreements in the order confirmation respectively in the sales contract. more machines and mixing plants on our website More information Use: construction, Usable material: concrete, General condition: very good, Technical condition: very good, Visual condition: very good,

Year of construction: 2020, Condition: excellent (used), Functionality: fully functional, Mobile 3D coordinate measuring machine - Flexible 3D measurements at any location Image guided 3D coordinate measuring machine Djlqw N Espz Ityo Aecg Keyence Measuring System WM-3000 Coordinate Measuring System XM-2000, XM-1600 Digital Inspection Station TECHNICAL DETAILS camera chip: 4 MP CMOS Measuring range: 600 x 300 x 200 mm Smallest display unit: 1 µm Smallest angle: 0.0001 Repeatability (locked): +- 3 µm Table load: max. 25 kg Display: 15" TFT Initial purchase: 12/2020 Coordinate measuring system Measuring head: WM-3000 Camera tripod: WM-S1 Tripod extension / stand for measuring head: WM-EX1 Measuring software: incl. laptop Additional software 3D-CAD import/export: WM-H1C WM Battery charger: WM-BC1 Probe battery: WM-B1 Stylus: OP-88422; 2.5 mm Mouse: WM-M30D User manual: German Euro AC power cable: OP-99032, OP-99033 Attachments for camera realignment: OP-88546 Calibration cone for needle probe: OP-88547 Magnets for attachments camera realignment: 972344 Digital test station measuring head: XM-2000 Digital test station control unit: XM-1600 Additional software 3D-CAD import/export: XM-H1C XM Mouse, Keyboard: XM-M26E User manual: English AC power cable: OP-99031 MACHINE DETAILS Main electrical connection: 24 V Weight measuring head: 25,0 kg Weight tripod: 4,5 kg Weight extension: 4.0 kg

Year of construction: 2002, operating hours: 25,500 h, Condition: good (used), - CNC-cylindrical grinder -second hand- - JUNKER - Quickpoint 3000/10 Profil - yom 2002 / retrofitted 2014 - center hight app. 150mm - distance between centers app. 500mm - speed on circumferencet max. 140m/s - el. power on spindle 12kW Djlqw Nei Dff Ns E Ascg - dimensions of grinding wheel: 350 x 30 x 127mm - wigth app. 9t - longitudinal position unit MOVOMATIC - control JUPRO / JUWOP (SIEMENS 840D) - dresser with diamond roolere (on workpiece spindle) Without suction and without coolant system

Condition: refurbished (used), Year of construction: 2025, Functionality: fully functional, spindle bore: 105 mm, turning diameter: 1,350 mm, turning diameter over bed slide: 1,350 mm, turning diameter over top slide: 1,000 mm, turning length: 3,000 mm, total length: 5,500 mm, total width: 1,800 mm, total height: 1,800 mm, overall weight: 11,400 kg, workpiece weight (max.): 11,000 kg, spindle mount: MK 6, The PORĘBA TR-135B/3M universal lathe has been comprehensively rebuilt and modernized, has technical parameters in accordance with the technical and operational documentation DTR of a new machine, WOT technical acceptance conditions and the Polish Standard and also meets EU requirements. The machine is covered by a full 12-month warranty on spare parts and electrical components. Availability: within 3,5 months, starting from the order Technical specifications: - distance between centers/turning length: 3000 mm - turning diameter over bed: 1350 mm - turning diameter over support: 1000 mm - turning diameter in bridge recess: 1650 mm - spindle bore diameter: 105 mm - maximum workpiece weight between centers: 8000 kg - maximum workpiece weight between centers + 1 steady: 10000 kg - maximum workpiece weight between centers + 2 steadies: 11000 kg - number of spindle speeds: 21 - range of rotational speeds (rpm): 5 - 630 - number of feeds: 80 - range of feeds (mm/rev): longitudinal: 0.07 - 10 transverse: 0.035 – 5 - engine power [kW]: 27/41 (1st gear / 2nd gear) - overall dimensions: total length: 5500 mm width: 2130 mm height: 1550 mm total weight: 11400 kg Standard equipment: tailstock, coolant pump, tool post, chuck cover Additional equipment available at extra charge: Dcelqjdy I I Aow N E Aog - 3- or 4-jaw chucks, various diameters and variants - Digital readout on 2 axes with assembly and calibration - Steady rest, 40-400 mm, with rollers - Steady rest, 400-700 mm, with rollers - Steady rest, 450-900 mm, with rollers - MULTIFIX quick change tool post

Condition: ready for operation (used), Year of construction: 2007, operating hours: 14,161 h, Functionality: fully functional, machine/vehicle number: A0110A0036, punching force: 16 t, laser power: 2,000 W, sheet thickness (max.): 4 mm, space requirement length: 6,000 mm, space requirement width: 6,900 mm, travel distance X-axis: 2,500 mm, travel distance Y-axis: 1,250 mm, TECHNICAL DETAILS Combined operation: 2,175 x 1,250 mm Laser operation: 2,500 x 1,250 mm Punching mode: 2,500 x 1,250 mm Outputs Maximum sheet thickness: 4 mm Maximum punching force: 165 kN Maximum workpiece weight: 120 kg Laser power: 2000 W Laser speeds X-axis: 90 m/min Y-axis: 60 m/min Simultaneous: 108 m/min C-axis punching: 60 m/min C-axis thread forming: 180 m/min Dcelqw N Esvgc Apo Aog Punching stroke sequence: 600 1/min Stroke sequence marking: 1,300 1/min Tools Tool positions in the linear magazine: 19 (with 2 clamps) MultiTool capacity: 2 to 10-fold Number of tools in MultiTool: 19 to 190 Rotation of all tools: 360 Tool change time: 0.9 - 3.6 s Maximum punching diameter: 76.2 mm Maximum bending height (MultiBend): 25 mm Position accuracy Position deviation: ±0.1 mm Average position spread: ±0.03 mm MACHINE DETAILS Total weight: 12,500 kg Space requirement: 6,000 x 6,900 mm Connected load: 55 kVA Laser cutting time: 14,161 h Laser switch-on time: 63,575 h

Condition: used, in standard equipment for rear mounting Working width 280 cm / Delqotyw Azew N E Ascg

Condition: new, Year of construction: 2025, machine/vehicle number: 712520122, FRUMECAR ECA 3000 fully mobile concrete plant Dslqw Nshd Na Uo E Ascg condition: NEW capacity: 120 m³/h mixer: Sicoma MAO mixer size: 3 m³ cement silos: 2x 55 to. guarantee: 1 year from startup more machines and mixing plants on our website More information Use: construction, Usable material: concrete, General condition: very good, Technical condition: very good, Visual condition: very good,

Year of construction: 2021, Condition: new, Functionality: fully functional, With the VITAPOINT 3000 air purifier, harmful substances are almost completely filtered over an area of up to 80 m² and the air quality is significantly improved, especially in heavily frequented or polluted rooms. The air purifier quietly extracts the polluted air near the floor and cleans it using two filter stages (G4 + H14 HEPA). The hygienically clean air is then fed back into the room via a ventilation grille at the top of the system. The separated particles remain in the filters and are disposed of with them. Dcolqw Neubuu Is E Aog

Condition: used, Year of construction: 2008, operating hours: 570 h, load capacity: 1,000 kg, lifting height: 1,550 mm, free lift: 1,500 mm, mast type: standard, construction height: 1,965 mm, fork length: 1,150 mm, drive type: Elektro, construction width: 810 mm, net weight: 748 kg, High lift truck Load center of gravity: 600 Fork width: 170 mm Fork thickness: 60 mm Mast type: Mono Condition: Ready for use and fully functional Technical condition: good Front tires Type: Polyurethane Front tires Condition: 80 - 100% Rear tires Type: Polyurethane Rear tires Condition: 80 - 100% Battery Volt: 24V Battery Ah: 160Ah Battery manufacturer: AIM Battery type: PzS Battery year of manufacture: 2022 Dolet Ddtgsqw N E Aocg Battery condition: 80 - 100% Pulse control, non-creeping tires,

Condition: refurbished (used), Year of construction: 2025, Functionality: fully functional, spindle bore: 90 mm, turning diameter: 630 mm, turning diameter over bed slide: 630 mm, turning diameter over top slide: 380 mm, turning length: 3,000 mm, quill diameter: 90 mm, total length: 4,900 mm, total width: 1,420 mm, total height: 1,590 mm, rotational speed (max.): 1,800 rpm, rotational speed (min.): 18 rpm, overall weight: 3,700 kg, workpiece weight (max.): 1,500 kg, spindle mount: MK 6, The universal lathe FAT TUR 630M/3M has been comprehensively rebuilt and modernized, has technical parameters in accordance with the technical and operational documentation DTR of a new machine, WOT technical acceptance conditions and the Polish Standard and also meets EU requirements. The machine is covered by a full 12-month warranty on spare parts and electrical components. Availability: in stock, under power, ready for technical acceptance. Technical specifications: - distance between centers/turning length: 3000 mm - turning diameter over bed: 630 mm - turning diameter over support: 380 mm - spindle bore diameter: 90 mm - maximum workpiece weight between centers: 1500 kg - number of spindle speeds: 21 - range of rotational speeds (rpm): 18 - 1800 - range of feeds (mm/rev): longitudinal: 0.05 – 3,26 transverse: 0.25 – 1,63 - engine power: 15 kW - overall dimensions: total length: 4900 mm width: 1420 mm height: 1500 mm total weight: 3650 kg Dolqwod Eaa Ej N E Aocg Standard equipment: tailstock, coolant pump, tool post, chuck cover Additional equipment available at extra charge: - 3- or 4-jaw chucks, various diameters and variants - Digital readout on 2 axes with assembly and calibration - Steady rest, 10-140 mm, with rollers - Steady rest, 10-180 mm, with rollers - Steady rest, 140-300 mm, with rollers - MULTIFIX quick change tool post

Condition: used, Anton Paar Synthos 3000 microwave oven Technical data Rotor 4x24MG5: Maximum volume: 5ml Working volume: 0.3-3.0ml Max. Working pressure: approx. 30 bar Max. Temperature: 80°C Dcslovgc T Ioqw N E Asg You are welcome to come by for a viewing. We will be happy to arrange a cost-effective forwarding agent for you. organize! You will receive a proper invoice. A net invoice can also be issued for foreign customers. Prerequisite is a valid VAT number. Subject to prior sale. Visit our store and have a look at our other offers. Company names and trademarks are the property of their owners and are used only to identify and describe the products. Deviations from technical data and errors in the description of the article may occur and are reserved.

Condition: used, Year of construction: 2006, approx. 3900 ha Lower linkage hitch Disc field Harrow Tramline computer / Front packer / Delqw Nstvfz Ie E Aecg

Condition: used, Year of construction: 2007, machine/vehicle number: 001669, Lg 33121 Single side decoiler ARKU AH 3000/ST-M year of manufacture 1995 belt width max. 600 mm load capacity max. 3.000 kg coil outer diameter max. 1.800 mm Spreading hydraulic Pressing arm hydraulic Decoiler with auxiliary drive and brake coiler chair fixed + reel traversing device with: Lg 33221 High performance belt leveler LORENZ BRM 50/620.9 year of manufacture 2007 Machine no. 001669 Dceljhigmbsqw N E Aeg passage width max. 620 mm number of straightening rolls 9 Straightening roll diameter 50 mm Material density 0.7 to 6.0 mm Straightening rolls supported several times against deflection All rolls driven by transfer gearboxes and cardan shafts. cardan shafts. Used, in as-is condition from stock, available immediately. On request with overhaul. Delivery time by agreement. Further data shortly or on request.

Condition: used, Electric heating: 28 kW Adjustable air circulation Pneumatically controlled fresh air, exhaust air, and smoke damper Cleaning: foam cleaning Dcelqwotq T Nvo N E Aeg Smoke feeding: on customer request Smoking material: wood chips Without the after-burning system Installation dimensions of the machine in cm: Width: 158 Length: 145 Height: 275 Trolley dimensions in cm: 100 x 100 x 200

Condition: used, Year of construction: 2023, Exact harrow 3000-125 Electron. Empty marker sensor Track marker 3000 ISOBUS / Cataya Special Radar sensor international Electric tramline control / parking support ----- CombiDisc 3000 Disc field fine / toothed Wedge ring roller Dolqw Nett Adaj E Aocg

Condition: used, Electric heating: 28 KW Adjustable air circulation Pneumatically controlled fresh air, exhaust air, and smoke damper Cleaning: foam cleaning Dcjlohzgu Doqw N E Aog Smoke feeding: on customer request Smoking material: wood chips Without the after-burning system Installation dimensions of the machine in cm: Width: 150 Length: 145 Height: 275 Trolley dimensions in cm: 100*100*200 height Delivery time: 30 working days after advanced payment

Condition: used, Year of construction: 2023, Exact harrow 3000-125 Adjustable harrow attachment set Additional / electronic track marker 3000 AmaDrill 2 for Cataya Radar sensor / international Analog working position sensor Electric tramline control / control valve and hydraulic throttle Djlqw N Eetgpggj Ajcg