Used Barford Sxr 5000 for sale (3,713)

Condition: new, Functionality: fully functional, cutting width at rip fence: 1,270 mm, cutting height (max.): 140 mm, saw blade diameter: 400 mm, rotational speed (min.): 3,700 rpm, motor voltage: 400 V, power: 7 kW (9.52 HP), sliding table length: 3,200 mm, Equipment: scorer, XENIA 40 M. Sliding table saw with a pivoting 400 mm saw blade and scoring device. With motorized height and angle adjustment. - Extractor connection - Extractor nozzle diameter 120 mm - Extractor nozzle diameter of saw blade guard 80 mm - Installation information - Transport width 1150 mm - Machine body length 1800 mm - Machine body width/depth 928 mm - Space required length 7100 mm - Space required width/depth 5050 mm - Dimensions and weight - Weight (net) approx. 764 kg - Explanation of space requirements - The dimensions take into account maximum travel distances or usable lengths. - Working area length 5700 mm - Working area width/depth 1900 mm - Explanation of working area - Please add the specified dimensions to the space requirements to determine the recommended free installation space for the machine. Electrical Data - Supply voltage 400V - Mains frequency 50Hz - Scoring motor power 0.9kW - Drive motor power 7.0kW - Drive motor rated operating mode S6 - Drive motor duty cycle 40% Dkobvrzyswg A Rfj Ajl Sliding carriage and table - Trimming frame length 3200mm Circular saw unit - Cutting width with parallel stop 1270mm - Max. cutting width to the left of the sawblade 3200mm - Sawblade inclination 90-45° - Max. cutting height 90° 140mm - Max. cutting height 45° 99mm - Sawblade diameter 400mm - Sawblade speed 3000-4000-5000rpm Scoring unit - Scoring sawblade diameter 120mm - Scoring sawblade speed 8500rpm Equipment - Scoring unit - Anodized aluminum sliding table - Handle for sliding table - Material roll on the trimming frame - Saw parallel stop - with round bar guide - Stops - Professional folding stops - Trimming shoe - Table extension - Table extension - Saw blade pendulum protection If you have any questions, please contact us! Are you looking for a specialist dealer near you? We supply machine dealers throughout Germany, in European and non-European countries with metalworking machines, compressed air technology, woodworking machines, welding technology, as well as cleaning and workshop technology. Contact us and we will tell you the nearest dealer.

Year of construction: 2001, Condition: ready for operation (used), General Data Measurements width 6667 Measurements depth 5916 Machine weight 5000 Dkebvrzjwa Entsy Aol Main Drive Number of axis 2 Workpiece Workpiece X 3255 Workpiece Y 3120 This SELCO EBL 120 was manufactured in 2001. A robust panel saw ideal for precise cutting of large panels. If you are looking to get high-quality cutting capabilities, consider the SELCO EBL 120 machine we have for sale. Contact us for more information. Application Types Sawing (Wood)

Condition: used, mileage: 395,000 km, Year of construction: 2017, Serial number: YV2T0X1A2HZ11xxxx Please contact ATS Norway AS for more information Please provide reference number upon request: 19768 Specifications: Dsbov U S Dxovrzy Ajkl - 2017 model - Km: approx. 395,000 - Automatic - Tires (see pictures) - Euro 6 - Full side opening - 2000 kg Zepro lift - Rear view camera - Extra light - Length: 990 cm - Width: 260 cm - Wheelbase: 560 cm - Net weight: 8800 kg - Max Payload: 7125 kg - 4x2 - 256 hp - Radio/CD - Air conditioning/ac Description: 2017 Volvo FL box truck with full side opening and lift. It is ready to be put into operation. Can be delivered within a short time. Km: 395000 HK: 255 Technical approved: Yes EU-approved until: 27.05.2025 Own weight: 8800 Total Weight: 16000 Payload: 7125 Width: 260 Length: 990,1 Euro: 6

Condition: used, Year of construction: 2022, operating hours: 1,242 h, load capacity: 2,500 kg, lifting height: 5,850 mm, mast type: telescope, power: 54 kW (73.42 HP), fork carriage width: 1,070 mm, ground clearance: 270 mm, front tire type: Camso, front tire size: 12-16.5, rear tire type: Camso, rear tire size: 12-16.5, total length: 5,145 mm, wheelbase: 2,200 mm, engine type: Kubota V3307-T, drive type: Diesel, construction width: 1,870 mm, net weight: 4,800 kg, ・Maximale seitliche Reichweite: 3.40 m ・Ausbrechkraft mit Schaufel: 3427 daN ・Kippwinkel 12 ° ・Schüttwinkel 117 ° ・Wenderadius (über Räder) 3.31 m ・Eigengewicht (mit Gabel) 4800 kg ・Bereifung: Pneumatisch ・Heben 8 s ・Senken 5.40 s ・Teleskop ausfahren 5.60 s ・Teleskop Einfahren 4.30 s ・Ankippen 3.50 s ・Auskippen 3.60 s ・Anzahl der Zylinder / Tragfähigkeit der Zylinder 4 - 3331 cm³ ・Nennleistung Verbrennungsmotor - Leistung (kW) 75 Hp / 55.40 kW ・Max. Drehmoment / Motordrehzahl 265 Nm @ 1400 rpm Djbvrovdxuvszy Aokl ・Zugkraft 3550 daN ・Anzahl der Gänge (vorwärts / rückwärts) 2 / 2 ・Max. travel speed 24.90 km/h ・Parkbremse Automatische negative Parkbremse ・Festellbremse Ölbad Lamellenbremsen an den Vorderachsen ・Pumpenart Zahnradpumpe ・Hydraulikdruck 235 bar ・Motoröl 11.20 l ・Hydrauliköl 115 l ・Fassungsvermögen des Kraftstofftanks 63 l ・Geräuschpegel im Fahrerstand (LpA) 76 dB ・Umgebungsgeräusch (LwA) 104 dB ・Schwingungsbelastung Hand/Arm < 2.50 m/s² ・Lenkräder (vorne / hinten) 2 / 2 ・Antriebsräder (vorne / hinten) 2 / 2 ・Sicherheit / Sicherheit Zulassung der Kabine Standard EN 15000 / Kabine ROPS - FOPS Stufe 1 ・Steuerungen JSM

Condition: new, mileage: 317 km, power: 141 kW (191.71 HP), gearing type: mechanical, fuel type: diesel, color: blue, overall weight: 15,000 kg, empty load weight: 6,900 kg, maximum load weight: 8,100 kg, axle configuration: 4x2, number of seats: 3, suspension: steel, driver cabin: day cab, Curb weight: 6900 kg, gross vehicle weight: 15000 kg, leaf spring suspension, historic truck, ÖAF Gräf + Stift, 19.192 Tornado, ZF 8S-109 transmission, TÜV 06-2025, chassis number 6370037, non-binding offer, subject to errors and prior sale. Illustration may not correspond to the offer. Djbvrzyjwhhdgj Aekl

Condition: used, Year of construction: 2008, The Heidelberg SM 52-2, manufactured in 2008 with the serial number 208391, is a high-performance printing press designed for efficient and precise printing tasks. Currently in production and located in Germany, this machine has a size of 370 x 520 mm and has completed 27 million impressions, demonstrating its reliability and longevity. Equipped with CP Tronic for remote ink and register control, AutoPlate for quick and automatic plate changes, and a cocking register for precise alignment, it ensures top-quality printing. The automatic wash-up devices for inking rollers, blankets, and impression cylinders simplify maintenance and reduce downtime. This plus version of the SM 52-2 features Alcolor Dampening and a Baldwin Balcontrol Refrigeration System to maintain optimal temperature control and consistent color management. Additional features include a double sheet and side lay detector to avoid feeding errors, segmented ink knives, and ink temperature control for precise ink application. The powder sprayer helps prevent ink set-off, and the machine comes with standard accessories to enhance its functionality. With a speed of up to 15,000 sheets per hour, this Heidelberg SM 52-2 is well-suited for businesses seeking a dependable and high-performance printing solution. Format: 370 x 520 mm Equipment: CP Tronic AutoPlate Cocking Register Automatic Wash-Up Devices For Inking Rollers, Blankets And Impression Cylinders Dksbvrowbr A Tozy Asl Plus version Alcolor Dampening, Baldwin Balcontrol Refrigeration System Double Sheet and Side Lay Detector Segmented Ink Knives, Ink Temperature Control Powder Sprayer, Standard Accessories Speed Up to 15000 Sheets/Hour

Condition: new, Year of construction: 2024, Functionality: fully functional, The new BLADE OFF safety system – Working with a circular saw has never been safer! • The BLADE OFF system detects potentially dangerous situations early and prevents them by removing the saw blade from the machine table in a fraction of a second. • With the help of sensors, the system is able to distinguish between the workpiece and the operator. • An LED light in the saw blade guard indicates with a green light whether the protection system is active. • Control via 10" eye-S control console. • Connection to "SCM Thundercut" (optimizer/sequence control app) possible. • Electrically adjustable parallel stop. • Start/stop buttons for the main and scoring saw blades integrated into the sliding carriage. • Special guides and an innovative curved design enable the edger carriage to be four times more load-bearing. • Ball-bearing telescopic arm ensures greater stability and smoother workpiece guidance. Dimensions and weights: - Length (product): approx. 7250 mm - Width/depth (product): approx. 4460 mm - Height (product): approx. 1770 mm - Weight (net) Approx. 1314 kg Extraction connection - Extraction nozzle diameter 120 mm - Extraction nozzle diameter saw blade guard 100 mm Installation information - Space required length 7250 mm - Space required width/depth 4224 mm - Space required height 1766 mm - Explanation of space requirements - The dimensions take into account maximum travel distances or usable lengths. Working area length 2850 mm front / rear in mm Dsbvrewg Anwezy Aokl Working area width/depth 1400 mm left / 500 mm right in mm Explanation of working area Please add the specified dimensions to the space requirements to determine the recommended free installation space for the machine. Electrical Data - Supply voltage 400V - Mains frequency 50Hz - Scoring motor power 1.3kW - Drive motor power 9.0kW - Rated operating mode S6 drive motor - Drive motor duty cycle 40% Sliding carriage and table - Format sliding carriage length 3200mm - Format sliding carriage width 360mm - Table length 1040mm - Table width 630mm Circular saw unit - Cutting width with parallel stop 1500mm - Max. cutting width to the left of the sawblade 3200mm - Trimming length 3200mm - Sawblade inclination 90-45° - Max. cutting height 90° 120mm - Max. cutting height 45° 89mm - Explanation - Max. cutting height with 400mm sawblade - Max. sawblade diameter 400mm - Min. sawblade diameter 300mm - Saw blade speed 3000 – 5000 rpm Scoring unit - Scoring saw blade diameter 120mm - Scoring saw blade speed 8500 rpm Features - Scoring unit with separate scoring motor - Anodized aluminum sliding table - On/Off switch on the sliding table - For main and scoring saw blade motors - Trimming frame - With angle-adjustable aluminum telescopic stop - Material roll on the trimming frame - Saw parallel stop - Motorized, via control panel - Stops - Professional folding stops - Eccentric clamp - Control of saw blade height, tilt, and parallel stop - Pivoting control panel on top - Table extension - Table extension - Saw blade pendulum protection If you have any questions, please contact us! Are you looking for a specialist dealer near you? We supply machine dealers throughout Germany, in European and non-European countries, with metalworking machines, compressed air technology, woodworking machines, welding equipment, and cleaning and workshop equipment. Contact us and we'll tell you the nearest dealer.

Condition: ready for operation (used), Year of construction: 1998, Control Unit Brand FANUC Model Professional 3 Main Drive Number of axis 3 Djbvrevpmaqozy Askl Movement X-Axis Movement 900 mm Y-Axis Movement 500 mm Z-Axis Movement 450 mm Table Outer length 1000 mm Outer width 500 mm Media Chip conveyor Yes Additional Equipment CE Certificate This 3-axis Makino V55-A15 vertical machining center was manufactured in 1998. It features a CNC FANUC PROFESSIONAL 3 control system, a table size of 1000 x 500 mm, and a spindle speed of up to 15000 rpm. X, Y, Z travels are 900, 500, and 450 mm respectively. Includes a conveyor. If you are looking to get high-quality milling capabilities consider the Makino V55-A15 machine we have for sale. Contact us for more information. Application Types Milling

Condition: good (used), Year of construction: 2000, grinding wheel diameter: 750 mm, grinding width: 180 mm, total height: 3,100 mm, overall weight: 13,000 kg, material thickness: 30 mm, grinding spindle motor power: 48 W, space requirement length: 4,900 mm, space requirement width: 5,000 mm, controller manufacturer: SIEMENS, controller model: 840 D, CONTROLS .. CNC controls SIEMENS 840 D WORKING RANGE (DOUBLE DISC GRINDER) .. Grinding wheel diameter: 750 mm .. grinding width max. - throughfeed grinding: 180 mm .. material thickness max. - throughfeed grindin: 30 mm .. grinding width max. - plunge cut grinding: 300 mm .. material thickness - plunge cut grinding: 80 mm GRINDING SPINDLE 1 .. drive power: 48 kW GRINDING SPINDLE 2 .. drive power: 48 kW Dsbvrzjurccpjy Ajkl COMPONENT-FEEDER .. Feeder Design: rotary Feeder .. feeder velocity max.: 20 mm/min .. feeder velocity min.: 240 mm/min DIMENSIONS / WEIGHTS .. space requirements -left/right-: 4900 mm .. space requirements -front/back-: 5000 mm .. total height: 3100 mm .. total weight approx.: 13000 kg with inline measuring system DISKUS IONIC 17A Emulsion treatment system HÜTTNER F6-157, YOM 2006

Year of construction: 2006, Condition: excellent (used), machine/vehicle number: TDRes1+2, Technical specifications: 1x Demag KBK 2 pillar-mounted jib crane, NL 500 kg with chain hoist Dsbvrzov A Sfxsy Ajkl Payload at full reach: 500 kg / 0.5 tonne payload Height: approx. 4.05 m Boom lower end: approx. 3.23 m Reach: 5 m Hook height: approx. 2.8 m Complete weight: approx. 1200 kg including dowel plate 152 x 152 cm With Demag DK chain hoist 500 kg, not DC as shown! Including bolts, cable tray, trolley, end cap, etc. Swivel range 300°, connection to 400V 16A Crane is disassembled and immediately available Item location: 75053 Gondelsheim Other cranes are available, load capacity 80-5000 kg, please inquire. See pictures Shipping via freight forwarder or pickup by appointment only

Condition: excellent (used), Year of construction: 1988, travel distance X-axis: 1,000 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 1,000 mm, table load: 5,000 kg, spindle diameter: 110 mm, spindle speed (min.): 13 rpm, spindle speed (max.): 1,000 rpm, total height: 3,000 mm, total length: 5,000 mm, total width: 3,200 mm, table length: 1,250 mm, feed length X-axis: 1,250 mm, feed length Y-axis: 1,100 mm, power: 11 kW (14.96 HP), Spindle: Spindle Taper: ISO # 50 Spindle diameter: 110mm Spindle Speed: 12.5 - 1000RPM Spindle Travel: 700mm Headstock Travel (Z axis): 1000mm Table: Table dimensions: 1250 x 1100 mm Dksbvrzjqhktxsy Ael Table Cross Travel: 1000mm Table Longitudinal Travel: 1000mm Power: Main motor: 11 kW Rapid Feed motor: 1.5kW Total Power Supply: AC380/ 50A Overall dimensions (LxWxH): 5000x3200x3000mm Machine weight: 10000 kg

Condition: used, Binding Store are pleased to offer this A1 condition Plockmatic Morgana SR90/ TR90 Bookletmaker and Trimmer. This model has just been removed from a charity in-plant that has closed its printing division. This Bookletmaker has been fully maintained and has only done 110,000 booklets from new. The Plockmatic SR90/TR90 is a powerful and extremely quiet hand feed booklet-maker. It can produce booklets from A3 to A4 and A4 to A5 size booklets and has a staple and fold capacity of 22 sheets of 80gsm enabling booklets of up to 88 printed pages to be created. It has an very easy to use LCD panel to enable automatic size changes and has heavy duty staple heads and a staple cartridge capacity of 5000. The delivery of the finished booklets is from a motorised conveyor. If you are looking for a great value booklet maker thats very user friendly then this could be the machine for you. Format: A3 to A4 and A4 to A5 size Equipment: Debowdwxfevrzy Ajkl Booklets from A3 to A4 and A4 to A5 size

Condition: used, Year of construction: 2012, fuel type: diesel, Log stacker Svetruck, type TMF 15/11 Year of construction 2012 Mileage 16370 according to counter Total weight 58500 kg Machine dimensions complete in length x width x height 11400 x 3900 x 6000 mm Machine dimensions (dismantled) in length x width 7500 x 3900 mm Height without dimensions 4700 mm Height without mast and mast support 4300 mm Mast dimensions in length x width x height 8000 x 1600 x 2000 mm Grab dimensions in depth x width (closed) x height 1400 x 3600 x 4200 mm Length of gripper open 5200 mm, height of gripper 4000 mm Front wheelbase 1500 mm Height 250 mm (pole plate) Rear wheelbase 1600 mm Height 400 mm Lifting capacity telescope retracted max. 15000 kg Lifting capacity telescope extended max. 11000 kg Stacking height telescope extended (open gripper) 8000 mm Stacking height telescope extended (closed gripper) 7600 mm Reach center drive axle max. 6870 mm Powered by 6 cylinder Volvo diesel engine with 289 KW / 393 HP Displacement 12130 cm³ Transmission type Torque converter Automatic 3 forward ? and 3 reverse gears Travel speed 27 km/h Debvju Dfpkjrzy Ajkl Tire size 18.00 x 25? We will be happy to send you more details and further pictures on request. This description is not a binding offer and may contain errors. No guarantee for all details.

Condition: ready for operation (used), Year of construction: 2013, General Data Machine weight 15000 kg Control Unit Brand MAZATROL Model matrix 2 Main Drive Spindle speed range 18000 rpm Spindle motor power 15 kW Tool taper ISO 40 Pressing force 20 BAR Number of axis 5 Movement X-Axis Movement 630 Dkebvrzyjv Rr R De Asl Y-Axis Movement 1100 Z-Axis Movement 600 Table Outer length 700 mm Outer width 500 mm Additional Equipment Number of Tools (ATC Magazine): 30 Number of Pallets: 1 This 5-axis Mazak VARIAXIS I 700 vertical machining centre was manufactured in 2013. Ideal for complex machining tasks, it offers versatility and precision in a robust design. Consider the opportunity to buy this Mazak VARIAXIS I 700 vertical machining centre. Contact us for more information. Application Types Milling

Condition: used, mileage: 366,574 km, power: 368 kW (500.34 HP), first registration: 03/2013, overall weight: 26,000 kg, fuel type: diesel, color: blue, axle configuration: 3 axles, brakes: retarder, gearing type: mechanical, emission class: euro5, loading space volume: 10 m³, loading space width: 2,400 mm, loading space length: 4,900 mm, loading space height: 800 mm, Year of construction: 2013, total width: 2,550 mm, total height: 3,500 mm, Equipment: ABS, air conditioning, parking heater, Scania R 500 CB 6x4 HHZ VIN: 5315000 Chassis / Attachments: * Wheelbase: 3300 mm / 1350 mm * Leaf spring suspension * Tires: 315/80 R.22.5 * Condition: approx. 30% * 1 x 350 L aluminum tank * 1 x AD-Blue tank * 1 x hydraulic tank * Bawer stainless steel storage box Engine / Transmission: * 15,607 cc / 368 kW / 500 HP / V8 / Euro 5 * 12-speed manual transmission * Retarder * Differential lock * AP axles Cab Equipment: * CR 19 N cab * 1 x bunk Dkebvrzyovxyavs Aol * Auxiliary heating * Air conditioning * CD radio / CB radio * AUX / USB * 2 x rotating beacons * Roof bar Body: * Meiler three-way tipper * Bordmatic * Rear dump * Cargo space: 4.90 m x 2.40 m x 0.80 m, approx. 10 m³ * Front wall: 1.00 m with slope Weights: * Gross vehicle weight 26,000 kg * Payload 13,770 kg * Unladen weight 12,230 kg Other: * German registration * 1 previous owner * SP 10 / 2025 New general inspections/safety inspections or weight reductions/increases are available upon request. We are happy to assist you with obtaining export/transfer license plates, and we can also arrange for the transfer of your purchased vehicles within Germany. Contact us! We speak the following languages: German, English, and Russian! ----No liability for printing and typographical errors, changes, prior sale, and other errors reserved! Your RL-Leible Team! ----Who are we? Leible Commercial Vehicles is a family-owned company based in Kehl am Rhein. Thanks to our many years of experience in the reconditioning and distribution of commercial vehicles, we are a reliable partner for customers worldwide. Leible Commercial Vehicles' particular strength lies in the sale of new and used commercial vehicles. A wide variety of vehicles can be found on our 11,000 square meter site. Our corporate philosophy is characterized by fairness and integrity. Because customer satisfaction is very important to us, we offer our customers an excellent all-round service package and provide them with a competent contact person who will assist them in the purchase or sale of vehicles. See for yourself! Our services for you: Loading vehicles We are happy to assist you with loading your purchased vehicles. Organizing special transports We are happy to help you organize special transports. Day numbers / export license plates We are happy to help you obtain export license plates/short-term license plates. Completing customs formalities We are happy to help you with customs matters.

Year of construction: 2002, Condition: excellent (used), machine/vehicle number: Ross10-MB, Technical specifications: 1 Vetter / Liftket pillar-mounted jib crane, NL 500 kg with Liftket chain hoist Dkebvjwgwbrorzy Aol Type PS5-4.0 Payload at full radius: 500 kg / 0.5 tonne payload Height: approx. 4.5 m Lower boom length: approx. 3.7 m Outreach: approx. 4.5 m Hook height: approx. 3.3 m Complete weight: approx. 800 kg including base plate 105 x 105 cm with Liftket chain hoist, 500 kg Slewing range: 270°, connection to 400 V 16 A Crane is disassembled and immediately available Item location: 75053 Gondelsheim Other cranes are available, load capacities 80-5000 kg, please inquire. See pictures Shipping via freight forwarder or pickup by appointment only

Condition: used, Year of construction: 2012, Serial number: W09STTB3NBEN1xxxx Please contact ATS Norway AS for more information Please provide reference number upon request: 18972 Specifications: - 2012 model - 3 axle - Turn on 3 axles - Lift on 1 axle - Box space - Tvinge fasteners - Extension at 5.5 metres - Internal length on 1. stage: 4,422 m - Internal length on 2. stage: 9,021 m - Total internal length: 13,475 m - Ready for delivery Description: Debvrovgx Syezy Ajkl Everything work as it should according to the new owner. Ready for delivery Technical approved: Yes EU-approved until: 02.04.2026 Own weight: 10560 Total Weight: 50000 Payload: 39440 Width: 255 Length: 1378

Condition: ready for operation (used), Year of construction: 2014, General Data Machine weight 5000 Control Unit Brand HEIDENHAIN Model iTNC530 Main Drive Spindle speed range 10000 Spindle motor power 12 kW Tool taper ISO 40 Number of axis 3 Movement X-Axis Movement 800 mm Y-Axis Movement 500 mm Z-Axis Movement 540 mm Table Outer length 910 mm Outer width 500 mm Tslots size 18 +0.006/ + 0.024 mm Number of tslots 5 Distance between 100 mm Djbvrzyju Ah H Aj Aokl Table load 1100 kg Tools Slots in storage 24 Max weight 6 kg This 3-axis +GF+ AGIE CHARMILLES VCE 800 PRO vertical machining centre was manufactured in 2014. It features a robust HEIDENHAIN iTNC530 control, a maximum spindle speed of 10,000 min/¹, and a tool holder of ISO 40. The work table measures 910x500 mm, supporting up to 1100 kg. Ideal for precision machining, it includes a 24-position tool changer. If you are looking to get high-quality milling capabilities consider the +GF+ AGIE CHARMILLES VCE 800 PRO machine we have for sale. Contact us for further details regarding this machine. Application Types Milling

Condition: used, mileage: 366,574 km, power: 368 kW (500.34 HP), gearing type: mechanical, fuel type: diesel, color: blue, overall weight: 26,000 kg, axle configuration: 3 axles, first registration: 03/2013, emission class: euro5, brakes: retarder, Year of construction: 2013, total width: 2,550 mm, total height: 3,500 mm, loading space volume: 10 m³, loading space length: 4,900 mm, loading space width: 2,400 mm, loading space height: 800 mm, Equipment: ABS, air conditioning, parking heater, Scania R 500 CB 6x4 HHZ VIN: 5315000 Chassis / Attachments: * Wheelbase: 3300 mm / 1350 mm * Leaf spring suspension * Tires: 315/80 R.22.5 * Condition: approx. 30% * 1 x 350 L aluminum tank * 1 x AD-Blue tank * 1 x hydraulic tank * Bawer stainless steel storage box Engine / Transmission: * 15,607 cc / 368 kW / 500 HP / V8 / Euro 5 * 12-speed manual transmission * Retarder * Differential lock * AP axles Debvrzyjvxya As Ajkl Cab Equipment: * CR 19 N cab * 1 x bunk * Auxiliary heating * Air conditioning * CD radio / CB radio * AUX / USB * 2 x rotating beacons * Roof bar Body: * Meiler three-way tipper * Bordmatic * Rear dump * Cargo space: 4.90 m x 2.40 m x 0.80 m, approx. 10 m³ * Front wall: 1.00 m with slope Weights: * Gross vehicle weight 26,000 kg * Payload 13,770 kg * Unladen weight 12,230 kg Other: * German registration * 1 previous owner * SP 10 / 2025 New general inspections/safety inspections or weight reductions/increases are available upon request. We are happy to assist you with obtaining export/transfer license plates, and we can also arrange for the transfer of your purchased vehicles within Germany. Contact us! We speak the following languages: German, English, and Russian! ----No liability for printing and typographical errors, changes, prior sale, and other errors reserved! Your RL-Leible Team! ----Who are we? Leible Commercial Vehicles is a family-owned company based in Kehl am Rhein. Thanks to our many years of experience in the reconditioning and distribution of commercial vehicles, we are a reliable partner for customers worldwide. Leible Commercial Vehicles' particular strength lies in the sale of new and used commercial vehicles. A wide variety of vehicles can be found on our 11,000 square meter site. Our corporate philosophy is characterized by fairness and integrity. Because customer satisfaction is very important to us, we offer our customers an excellent all-round service package and provide them with a competent contact person who will assist them in the purchase or sale of vehicles. See for yourself! Our services for you: Loading vehicles We are happy to assist you with loading your purchased vehicles. Organizing special transports We are happy to help you organize special transports. Day numbers / export license plates We are happy to help you obtain export license plates/short-term license plates. Completing customs formalities We are happy to help you with customs matters.

Condition: used, Year of construction: 2013, Serial number: YG9511007C303xxxx Please contact ATS Norway AS for more information Please provide reference number upon request: 20000 Specifications: - Eu-approved until 16.02.2026 - 3 axles - Swing on 3 axles - Good tires - Lashings - Frame set - Ready for delivery Technical approved: Yes EU-approved until: 16.02.2026 Own weight: 8800 Dkjbvov U S Tmjrzy Ael Total Weight: 45000 Payload: 36200 Width: 255 Length: 1371

Condition: ready for operation (used), Year of construction: 2015, Main Drive Spindle speed range 15000 Tool taper CT 40 Number of axis 3 Movement X-Axis Movement 762 Y-Axis Movement 508 Z-Axis Movement 508 Media Chip conveyor Yes Dobvrzjvf Rzdey Aekl Internal cooling Yes This 5-axis HAAS UMC 750SS vertical machining center was manufactured in 2015. It features a spindle speed of 15,000 rpm, a CT 40 cone type, and a tool magazine with 40 + 1 places. Additional features include internal cooling and a chip conveyor. A great opportunity to buy this HAAS UMC 750SS vertical machining center. Contact us for further details regarding this vertical machining center. Application Types Milling

Condition: used, Year of construction: 2008, Serial number: YF1S8ZPJ18F02xxxx Dkebev U S Dfovrzy Ael Please contact ATS Norway AS for more information Please provide reference number upon request: 20001 Specifications: - Eu-approved until 05.12.2025 - 3 axles - Swivel on 3 - Tires (See pictures) - Trestle - Lashings - Ready for delivery Technical approved: Yes EU-approved until: 05.12.2025 Own weight: 9935 Total Weight: 45000 Payload: 35065 Width: 255 Length: 1200

Condition: ready for operation (used), Year of construction: 2016, Control Unit Brand OKUMA Model Osp-p300m Main Drive Spindle speed range 15000 Spindle motor power 199 N-m Tool taper BT40 BIG PLUS Number of axis 4 Media Internal cooling Yes Additional Equipment Djbvrzyoumyt Uo Aokl Filtration system: Sei filtration Auto pallet changer: Margherita 10 pallets This 4-axis Okuma MA-400HA horizontal machining center was manufactured in 2016. It features an Electrospindle BT40 BIG PLUS with 15000 rpm and 199 N-m torque, a high-pressure coolant system at 70 bar, and a Sei filtration system. Equipped with an advanced OSP-P300M control, it also includes an auto tool changer with 218 tools and a Margherita 10-pallet auto pallet changer. For more information about this horizontal machining center, please reach out to us. Application Types Milling

Condition: used, Year of construction: 2015, Serial number: SVHNS33NTFA00xxxx Please contact ATS Norway AS for more information Please provide reference number upon request: 19999 Specifications: - Eu-approved until 02.09.2025 - 3 axles - Lift on 1 axle - Swing on 3 axles - Good tires - Lashings - Frames - Ready for delivery Dkobvev U Sqlorzy Asl Technical approved: Yes EU-approved until: 02.09.2025 Own weight: 8400 Total Weight: 45000 Payload: 36600 Width: 255 Length: 1385

Condition: used, mileage: 425,000 km, Year of construction: 2019, Serial number: WMA21XZZ3KM82xxxx Please contact ATS Norway AS for more information Please provide reference number upon request: 19897 Specifications: - Eu-approved until 07.05.2025 - Km: Approx. 425,000 - Transmission: Automatic Dksbvrzyev U R She Aol - Full air suspension - Euro 6, 500 hp - Tires (see pictures) - 6x2 - Bus construction Cabinet (was on a previous car) - 19 pallets - Trailer coupling - VBG - Zepro Lifting element, 2000 kg - Internal length: Approx. 7.45 m - Internal width: Approx. 2.5 m - Internal height: Approx. 2.65 m - 2 x berths - Compressor horn - Rotor lamps - Extra lights - Exterior height: 4 m according to owner - Tool cabinet - Radio/CD - Air conditioning/AC - Maintenance done by myself - Video - Ready for delivery Description: MAN TGX Cabinet truck from 2019. 19 pallet cabinet that has been on a previous truck. Full side opening and liftgate. Eu-approved and ready for delivery. Km: 425000 HK: 500 Technical approved: Yes EU-approved until: 07.05.2025 Own weight: 12650 Total Weight: 28000 Payload: 15275 Width: 260 Length: 1000 Inside width: 250 Inside lenght: 745 Inside hight: 265 Euro: 6 Gearbox: Automatic Number of pallets: 19