Used Atlas-Copco Qas 45 for sale (26,023)

Condition: used, mileage: 200,000 km, power: 243 kW (330.39 HP), first registration: 01/2007, overall weight: 18,000 kg, fuel type: diesel, color: orange, axle configuration: 2 axles, next inspection (TÜV): 05/2025, gearing type: mechanical, emission class: euro4, loading space width: 2,400 mm, loading space length: 4,200 mm, loading space height: 600 mm, Equipment: crane, * Mercedes-Benz 1833 Axor 3-way tipper with crane * EZ 2007 * 200,000 km * Euro 4 * Double H manual transmission * 4x4 all-wheel drive * Meiller tipper: 4.20 x 2.40 x 0.60 m * Wheelbase: 3.90 m * Tow bar * Empty weight: 10750 kg Debevycg Usvq Rxrecg * GGW: 18,000 kg * Payload: 7250 kg * Crane Atlas Terex 92.2 - A3 * With radio * 3x hydraulic * max.: 4300 kg * At 9.10 m: 910 kg * TÜV: 04/25

Condition: good (used), Year of construction: 1999, Functionality: fully functional, Tamroter screw compressor Gardener Denver Type ES 45-7.5 EANA Year 1999 S/ N 09990138 constantly maintained Capacity 7.95 m3/ min Dcebvq Rxourc Npjrog Motor 45 kW Voltage 400 V/ 50 Hz Weight 935 kg CE-marked

Condition: used, Underfloor circular saw, crosscut saw, pull saw, chop saw, sliding table saw, circular table saw, circular saw -Manufacturer: Rapid, table saw with lateral sliding table Dobvelmrkteq Rxrocg -Type: unfortunately without type designation -Motor power: 3 kW / 2850 rpm -Saw blade: Ø 300 mm -Max. Cutting height ca. 100 mm -Cutting width: up to 810 mm -Miter cut: up to 45° -length stop: -Dimensions 2050/1690/H890 mm -Weight: approx. 227 kg

Year of construction: 1986, Condition: good (used), Sizing saw Altendorf TRK 45 Year of manufacture 1986 S/N 86-9-209 checked in our workshop for normal operating condition carriage length: 1350 mm height and swivel adjustment manual with handwheel engine power: 5,5kW cutting width: 1250 mm 4 speeds 3/4/5/6000 rpm, Dcjbvqeng Etrj Rxrjg blade diameter max mm: 450 ( without scorer ) with scorer Automatic engine brake weight approx. 1100 kg Technical specification under reserve + 2 additional saw blades

Year of construction: 1991, Condition: used, Underfloor circular saw, crosscut saw, pull saw, chop saw, sliding table saw, table saw, circular saw, panel saw Dcsbjmydmbjvq Rxrsg -Manufacturer: Altendorf, sliding table saw type TKR 45 -Main motor: Bauknecht 5.5 kW with brake -Scorer motor: Emod 0.75 kW -Speed: 3000/4000/5000 rpm -Saw blade: Ø 300 mm / max. Ø 350 mm -Max. Cutting height: 90° 95 mm / 45° 70 mm -Miter cut: up to 45° -Cutting width: 2250 mm -Table length: 1400 mm -Dimension total 3480/1530/H1370mm -Weight: 1104 kg

Condition: used, Inductive sensor, electronic sensor, safety switch, inductive proximity switch, proximity sensor, Namur sensor -Inductive sensor: proximity switch -Type: unfortunately no type designation -Sensor cable: RSMV 3-224 -Number: 46x sensor available -Price: per piece -Dimensions: Ø 45 x 25 mm Dobvqouxg Iks Rxrjcg -Weight: 0.1 kg/pc.

Condition: used, face driver, face driver, face driver, driver tip, face driver, face driver -Manufacturer: Lenze ABW, face driver -Type: MS4 -Front dimension: Ø 45 mm -Recording: MK4 -Total dimensions: Ø 57 x 178 mm -Weight: 1.4 kg Dsbvq Rjtxku Ijxrecg

Condition: used, Year of construction: 1994, machine/vehicle number: 0894138, Metal band saw, band saw machine, band saw, vertical band saw, horizontal band saw, hydr. Horizontal band saw machine, semi-automatic, band saw machine, horizontal band saw machine -Manufacturer: Behringer, horizontal band saw automatic band saw type HBP 430/854G/R30 -Equipment: 2x cross transport chain conveyors, driven roller conveyor, stop system, -Saw drive: Dietz 7.5 kW -Cutting capacity flat: 90° 880 x 500 mm / 45° mm -Cutting capacity round: 90° 500 mm / 45° mm -Saw band speed: infinitely adjustable -Band saw: 7200 x 40 mm -Coolant device: cooling water -Setting dimensions: 26500 mm/6000/H2100 mm Dcobjpmdapevq Rxreg -Transport dimension: 26 loading meters -Weight: 16000kg

Condition: used, Welding edge former, welding edge former, weld seam preparation, welding edge forming machine, edge milling device, edge milling machine, mobile milling machine Dobvq Ret Trxiexrscg -Manufacturer: Knuth, edge milling machine -Drive: 0.75 kW -Table length: 500 mm -Angle: adjustable 15 to 45° -Dimensions: 500/370/H285mm -Weight: 29 kg

Condition: used, Globoid gear, indexing, oscillator indexer, index gear -Manufacturer: Manifold, gearbox from rotary indexing table type RTU 800 8-150 -Translation: i = 1:8 45° -Dimensions: see photos -Quantity: 2x gears available -Price per piece Dobverub H Toq Rxrjcg -Dimensions: 470/375/H500 mm -Weight: 172 kg/pc.

Condition: used, Countersink, countersinker -Manufacturer: Roterberg, countersink Senkmeister 3 -Countersink: 45° / Ø 35 mm -Recording: MK3 Dcsbvq Rotxkuusxreg -Number: 3x countersink available -Price per piece -Dimensions: Ø 60 x 250 mm -Weight: 1.8 kg

Condition: used, Bending tool, die, upper knife, upper tool, deer foot tool, deer foot tool for press brake Dcjbvq Rxoc R Ug Rsrog -Tool for: press brake -divided -Tool: 82° -Dimensions: 190 x 45 mm -Total length: 2125 mm -Lengths: 20/25/30/35/40/45/50/55/60/65/70/75/80/85/90/100/200/500/500 mm -Weight: 84 kg

Condition: used, Gear motor, electric motor, electric gear motor, spur gear motor Dcobvqottc Suo Rxrsg -Manufacturer: Ankerwerk Nürnberg AEG, gear motor with brake -Gearbox: Lenze 1 i= 31.5 -Speed: approx. 45 rpm -Engine: Katt type FN112 M 4 kW / 1430 rpm -Brake: Lenze 60 Nm -Shaft: Ø 60 x 120 mm -Dimensions: 940/390/H360mm -Weight: 145 kg

Condition: used, Forklift bucket, hydraulic forklift bucket, light material bucket, tipping bucket, container tipping device, forklift tines, forklift forks, fork tines Dcebjgnzxmjvq Rxreg -Forklift tines: 2 pieces/1 pair -Length: 1200mm -Cross section: 150 x 45 mm -Recording: 500 mm (see sketch in the photos) -Transport dimensions: 1380/700/H150 mm -Weight: 182 kg

Condition: used, Hoist, car lift, hoist, hoist, pit jack, axle free jack, truck hoist Djbvq Rxsikrpuorocg -Manufacturer: MWH Märkisches Werk Halver, truck lifting device pit jack -Type: Atlas LT -Load capacity: 2x 5000 kg -Lifting height: 1600 mm -Operating pressure: 60 bar -Accessories: incl., see photos -Transport dimension: 1000/940/H1400 mm -Total weight: 820 kg

Condition: used, Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws, interchangeable jaws, wedge bar chucks, interchangeable jaws power chucks -Top jaws: soft top jaws for wedge bar chucks, helical teeth -Jaw width: 45 mm -Dimensions: see photo technical. drawing -Total dimensions: 180/150/H120 mm Dobverlpp Ioq Rxrscg -Total weight: 20,2 kg

Condition: used, Bending tool, die, lower tool, die tool, hemming tool, press tool, forming tool -Die tool: Forming tool / press tool -Profile: Ø 45 mm -Dimensions: 535/195 / H140 mm -Weight: 35 kg Dsbvq Reg D Rmmoxrscg

Condition: used, Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws, interchangeable jaws, wedge bar chucks, interchangeable jaws power chucks Dcobvqsrh Ni Ee Rxrog -Top jaws: soft top jaws for wedge bar chucks, helical teeth -Jaw width: 45 mm -Dimensions: see photo technical. drawing -Total dimensions: 160/140/H190 mm -Total weight: 17,2 kg

Condition: used, Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws, interchangeable jaws, wedge bar chucks, interchangeable jaws power chucks Dcsbvq Rxephuqcorjg -Top jaws: soft top jaws for wedge bar chucks, helical teeth -Jaw width: 45 mm -Dimensions: see photo technical. drawing -Total dimensions: 190/150/H130 mm -Total weight: 18 kg

Condition: used, Mounting rails sliding set, pipe clamps, pipe fastening, pipe clamp holder, WBD holder -Manufacturer: Sikla, WBD holder for mounting rails -Type: HE 0820 41/41 41/45 -Quantity: 12 holders, 4x with clamps -Price/tax: complete -Transport dimensions: 380/250/H105 mm Dsbeq Syufjvq Rxrocg -Weight: 8.8 kg

Condition: used, Muffler, exhaust system, muffler, silencer, muffler -Manufacturer: Eberspaecher -Type: -Dimensions: see photos -Number: 2x silencers available Dcjbvq Rsitdivoxrjg -Price per piece -Total dimensions: 560/230/H130 mm -Weight: 6.2 kg

Condition: used, Sprockets, triplex sprocket, sprocket Dobvsdgnztoq Rxrocg -Pitch sprockets triplex: 1 1/4 "x 3/4" -Number of teeth: 45 teeth -Diameter: 470 mm -Total width: 140 mm -Tooth width: 18.5 mm -Socket: Ø 125 mm -Number: 3x sprockets available -Price: per piece -Weight: 103 kg -other sprockets in stock

Condition: used, Underfloor circular saw, crosscut saw, pull saw, chop saw, sliding table saw, table saw, circular saw, precision circular saw Dcsbom Hd Sfjvq Rxrog -Manufacturer: Rapid, table saw saw unit: 45° pivotable -Type: Pk 100 -Motor power: 2.5 kW / 2850 rpm -Saw blade: Ø 250 mm, (max. Ø 300 mm) - Cutting height 55 mm (max. ca. 100 mm) -Cutting width: 350 mm -Miter cut: up to 45° -Dimensions 1000/840/H1240 mm -Weight: 162 kg

Condition: used, Underfloor circular saw, crosscut saw, pull saw, chop saw, sliding table saw, table saw, circular saw, precision circular saw Dcsbvq Rxjm Sk H Ijrog -Manufacturer: Rapid, table saw saw unit: 45° pivotable -Type: Pk 100 -Motor power: 2.5 kW / 2850 rpm -Saw blade: Ø 175 mm, (max. Ø 300 mm) -Cutting height 37 mm with saw blade Ø 175 mm (max. ca. 100 mm) -Cutting width: 350 mm -Miter cut: up to 45° -Dimensions 940/860/H1390 mm -Weight: 162 kg

Condition: used, Motor control, controller -Manufacturer: Phoenix Contact, Mosca Motor Control -Type: EG 45 ME2213 Debvsdngwdoq Rxrecg -Number: 12x available -Price per piece -Dimensions: 75/45/H130 mm -Weight: 0.3 kg/pc.