Used Max Holland Fd30T-Mgc6 for sale (36,093)

Year of construction: 2021, Condition: as good as new (ex-display), Functionality: fully functional, Vertical infeed transport - Vertical 2600 mm washing machine with drying - Tilting table (behind the washing machine) - Horizontal outfeed transport Pos. 1 Loading station, 250kg With the help of the suction frame, the sheets are taken off the glass rack and they are placed vertically on the tilting table in front of the washing machine. Differences in inclination can be compensated by tilting of the suction frame. The suction frame has a rotating function to collect short formats in upright position and to place them down on the long edge. Light crane Trolley crane with a lift system travelling on rails by hand, which are standing on steel supports. Lift Electrical lifting and lowering, horizontal turning and tilting of loads. Generation of vacuum via vacuum pump system with check and display of the vacuum power. A central operation desk with integrated control buttons allows easy signal activation of the single functions. In case of pressure loss in the dangerous area, it is displayed and acoustical signal is given. Pos. 2 Vertical Inlet Transport WM The vertical transport serves as inlet transport in front of the washing machine. In horizontal position, the glass sheets are placed on Vulcan transport rollers. In vertical position transport rollers with Perumaan rings are driven via screw wheels. The transport rollers are arranged in drag bearings placed on a solid welded frame. Small glass sheets are placed manually on the transport frame. After placing the glass sheet, the transport is activated by push button. Pos. 3 Vertical Washing Machine with Drying Ceb E Syetwphwe I Usgt The washing machine body, washing chambers, recirculation vats and the drying nozzles are made entirely of stainless steel. The rubber rings of the transport rollers are resistant to cutting oil. Flat jet spraying nozzles in the pre-rinsing section are fed with city water. Coarse dirt particles removed are directly led into the drain. This reduces contamination of the DI-water circuit for the washing machine. The washing machine is equipped with energy and water saving cascade system. Pre-rinsing section with Flat jet spraying nozzles Washing section with 3 pairs of brushes, 3 vats and 3 pumps Acid section with 1 pair of brushes, 1 vat and 1 pump Drying section with 2 pairs of drying nozzles provide dry edges. Pos. 4 Vertical Inspection Transport with glass Activation Section The transport serves as Activation Section for the glass surface and as Inspection and Storage Transport before the Tilting Table. Drive by a geared motor, A.C., frequency controlled. All the rollers are arranged in drag bearings with a single drive operating pairs of spiral-toothed gear wheels. The transport rollers are vulcanized and ground. Pos. 5 Tilting Table with Horizontal Transport and Vertical Inspection

Condition: new, mileage: 8 km, power: 132 kW (179.47 HP), fuel type: diesel, gearing type: automatic, overall weight: 3,500 kg, loading space length: 4,900 mm, loading space width: 2,200 mm, loading space height: 2,350 mm, loading space volume: 25 m³, color: white, Equipment: air conditioning, HIRE PURCHASE * LEASING * FINANCING AT TOP CONDITIONS Toyota Proace Max Koffer L3H1 Engine 2.2 d-4D 180hp, Koffer, 8-speed automatic, 4900x2200x2350 Equipment: * 3 seats * ABS * Start Stop system * Fog lights * Multifunction steering wheel * Rear view camera * Automatic air conditioning Csbevm R Ume E Sy I Uogt * 8-speed automatic * Lane keeping assistant Construction: * Koffer 4200x2200x2350 * Bicycle protection * Double rear doors * Side door * Tool case * 3 year guarantee / 1,000,000km  * Year of production 2024 Available immediately 3 year guarantee / 1,000,000 km Our special service for you: * Service book maintained by contract partners and master workshop * Winter tires against. Available for an additional charge * Guarantee insurance up to a maximum of 36 months available for an additional charge * We are happy to accept your used vehicle as a fair trade! * Financing from 6.99% with and without down payment up to a maximum of 96 months, creditworthiness required * TÜV / DEKRA main and emissions test * EU net sale possible - intra-community delivery with a valid sales ID number * Non-EU COUNTRIES (worldwide) sale possible including export declaration, supplier declaration * We deliver your vehicle throughout Germany for an additional charge! * Registration service for CUSTOMS license plates and SHORT-TERM license plates including insurance and registration fees The information provided on the Internet is non-binding descriptions. Input errors and mistakes excepted. The information provided is not considered a guaranteed property in the sense of BGB § 434 Paragraph 1 Clause 3

Condition: used, mileage: 585,000 km, power: 368 kW (500.34 HP), first registration: 06/2019, overall weight: 19,000 kg, axle configuration: 4x2, tire size: -, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: air, Year of construction: 2019, Equipment: air conditioning, differential lock, navigation system, onboard computer, * Anti-fog * Differential lock * GPS car radio * Bluetooth * Air conditioning * Steering wheel controls * Heated seat * Cruise control and speed limiter * 2 tanks * 2 beds * Fridge * Spoilers * Sunroof * Webasto Tire information: 315/70R22.5 Differential lock Bluetooth Cgobevxlics E Sy I Uet Air conditioning Central locking Fridge GPS Three-dimensional deflector On-board computer Cruise control Additional tank Electric mirrors Suspension seat Heated seat Telephone Sunroof Webasto Power: 500CV DIN Power: 368kW

Year of construction: 2024, Condition: as good as new (ex-display), Exclusive, cutting-edge, and superior: The newly released AULUMA AUTAX grinder redefines the standard for efficient, precise resharpening of all standard double-knife and standard blade knives with unmatched quality. Embrace a groundbreaking approach to your sharpening needs with this semi-automatic grinder. Width 4m (maximum blade length in one clamping 3.4m). ADAPTABLE GRINDING ANGLES AND FLEXIBLE ADJUSTMENTS Sharpen any common knife type with the adjustable grinding angle. Secure the knife once without needing further adjustments. Quickly alternate between two preset angles, readable from user-friendly scales. Fine-tune the grinding depth with ease. Cgsb E Sjrni Dcjy I Uet PREMIUM BOSCH ANGLE GRINDER AND CERAMIC DISC This grinder comes with a BOSCH angle grinder featuring adjustable speed for perfect results, reaching the deepest parts of the blade. The innovative ceramic disc prevents overheating and preserves blade hardness. MANUAL ANGLE SETUP AND SWIVELING - AUTOMATED GRINDING Manually set the angles, then let the automated system, equipped with an optical sensor, find the first blade to start the automatic grinding. Once a blade is fully sharpened, the machine shuts off automatically. Manually swivel the carriage to sharpen the blade’s other side automatically. STABLE, WEAR-RESISTANT MOVEMENT WITH BALL-BEARING ROLLERS Its robust design ensures minimal wear. The zinc-coated rollers and guides fit seamlessly, enabling smooth, stable movements.

Condition: new, overall weight: 58,000 kg, Year of construction: 2025, Low loader semitrailer MAX100 4 A 8.60 U Technical data Speed 80 km/h Total weight 60,800 kg Fifth wheel load 18,000 kg Axle load 42,800 kg Empty weight Payload Gooseneck length 3,850 mm Fifth wheel height loaded 1,250 mm Loading area length 8,600 mm Extendable by 5,400 mm Axle spacing 1,360 mm Rear steering radius 2,300 mm Loading height with max. load 860 mm Total width 2,540 mm Suspension travel -55/+145 mm Technical description Gooseneck With bevelled corners at the front 45° and with rear bevel of approx. 760 mm x 10° 3 pairs of lashing rings (LC 5,000 daN) Hardwood flooring 30 mm thick Loading area in extendable version with rear slope of approx. 1,000 mm x 8° 5 pairs of lashing rings that can be folded outwards (LC 5,000 daN) 3 pairs of lashing rings that can be folded outwards (LC 10,000 daN) 1 pair of lashing rings lying in the front of the loading area (LC 10,000) Hardwood flooring approx. 48 mm thick, checkered plate above the axles Ramps Two-part steel ramps A pair of galvanized two-part steel ramps approx. 2750 +1400 mm x 800 mm with approx. 48 mm thick hardwood flooring Ramp with hydraulically foldable and retractable ramp parts, hydraulic lifting mechanism and hydraulically movable. Maximum load per pair 40,000 kg Tires 235/75 R 17.5 Brake system in accordance with EU regulations with EBS-E (4S3M) without connecting lines to the tractor unit Paintwork First-class, long-lasting corrosion protection of the standard shot-blasted welded frame guaranteed by 2-component zinc dust primer a high-quality 2-component (2K) top coat in a single color in RAL colors of your choice Rear section metallized and painted in RAL 9010 (pure white). Seat supports: Cgob E Syog Sk T Dj I Ujt JOST seat supports (mechanical) with 2-speed gearbox for 24t lifting load (50t test load) Steel construction made of high-strength fine grain steels. Steel qualities: Steel construction made of high-strength fine-grain steel S355J2+N/S355MC (yield strength 355MPa) S690QL/S700MC (yield strength 690MPa) Electrical system in accordance with EU regulations, lighting LED 24 Volt ASPÖCK-NORDIK (ASS3) ASPÖCK-UNIBOX on the connection panel at the front with sockets 24N, 24S & 15-pin. Connection in accordance with ISO. 24N IS0-1185 24S IS0-3731 15-pin IS0-12098 Accessories included: A galvanized steel front wall approx. 400 mm high. 2" kingpin 4 pieces of brake shoes with holder on the bulkhead. A holder for a rotating beacon at the rear of the trailer. SAF axles, two axles rigid, one axle with self-steering, air-sprung, with drum brake, with lifting/lowering function. The self-steering axle with electro-magnetic reversing lock can be activated via reverse gear or manually. Axle tool. Holder in the rear area of the gooseneck for aluminum loading ramps. Galvanized folding supports under the slope of the loading area. Mechanical locking of the loading area. A spare wheel with holder in front of the bulkhead. Yellow reflector tape in accordance with EU regulations on the side, on the extension and at the rear of the trailer. Yellow-red air couplings on the galvanized connection strip at the front. On the gooseneck and on the rear panel on the left and right there is a holder for the warning signs including a socket. A mud flap at the rear of the trailer. Manual and description On the gooseneck, plug-in aluminum side walls and rear wall approx. 2,440 x 400 mm (LX H). The rear galvanized plug-in stanchions are removable. Length of the body approx. 2,560 mm, +/- 46 kg 3 pairs of WADER container

Condition: good (used), Year of construction: 2022, Functionality: fully functional, overall weight: 1,400 kg, For sale is an Additive Manufacturing Technologies SB Pro MAX (which is equal to the Leering Normfinish Samba). This machine is designed to depowder or shotblast 3D-printed parts made with powder bed fusion technologies (SLS, MJF, SAF etc.) Csb E Sy Ievuzq Ie Uogt Belt volume: 63L Features: Three Blasting Guns Automatic Unloading Conveyor Belt System Auto Adjustable Parameters Ergonomic Loading Programmable Recipes Option fitted: digital pressure adjustment (allowing to do both depowdering and surface treatment in the same process). Available end of Feb '25 Keywords: AMT, Dyemansion, AM Solutions, Rosler, Additive Manufacturing Technologies, EOS, HP, Farsoon, 3d printing, selective laser sintering, mjf, multi jet fusion, 3d print, additive manufacturing, eosint, blasting, depowdering, shotpeening

Year of construction: 2022, operating hours: 535 h, Condition: used, Type of fuel: Diesel New: No Field of application: Construction Make of engine: Kubota Serial number: ESF208609 Transport dimensions (LxWxH): 2.09x1.29x2.5 Please contact Pfeifer Rentals & Sales B.V. for more information Ceb Eeucr Afj Sy I Ujgt

Condition: used, Pipe grab, round grab -self-locking -Exchange arms -up to approx. max.: Ø 150 cm -Clamping claws Ceb E Sob A I Sbey I Uegt -Total weight: 350 kg

Condition: excellent (used), Year of construction: 2023, Functionality: fully functional, machine/vehicle number: A20S52248546, new FARO measuring arm Csb Eevuyw To Sy I Uogt

Condition: used, Drill stand, drill stop, drill press stand, drill jig, drill bushing jig Cjb E Sysd Rh Rce I Ujgt -Quick release device -Max. Height: 100mm -Dimensions: 400/240/H220 mm -Weight: 22 kg

Condition: used, Tapping machine, pipe thread cutter -for: pipe size max. 2 inches Ceb E Sy Ijdm T S Aj Uogt -Cutting jaws: 1/2 ", 3/4", 1 ", 1 1/4", 1 1/2 " -Dimensions: 510/360 / H240 mm -Weight: 64 kg

Condition: used, Pipe heater, pipe burner, pipe construction burner -Max. Diameter: 250 mm -Burner for steel pipeline construction -Propane Csb Eob A Ix Se Sy I Ujgt -Transport box -Dimensions: 600/1400/H330 mm -Weight: 90 kg

Condition: used, Tapping machine, pipe thread cutter -for: pipe size max. 2 inches -Die jaws: 1" inches -Antrie: via 3 gears Cgsbob A Iyao E Sy I Uet -Dimensions: 550/360/H240 mm -Weight: 55 kg

Condition: used, Sanding drum, tail drum, belt grinder, belt sander -Drum is for a husband grinder -Drum width: 170 mm -Drum: Ø 200 mm -Eccentric adjustment with tactile clock Cob E Ssb A S S Uey I Usgt -Number: 2x drums available -Price: per piece -Dimensions: 200/290/H280 mm -Weight: 13 kg

Condition: used, Strapping machine, packaging machine, strapping device, strapping set, dispenser, tape dispenser, cutting stand, vertical cutting stand -Cutting stand: vertical, mobile substructure -Cutting width: up to 1110 mm -Roll diameter. up to 660 mm -Dimensions: 760/667 / H1290 mm -Weight: 24 kg Cgjbegmuz Uj E Sy I Ust

Condition: used, Tapping machine, pipe thread cutter -for: pipe size max. 2 inches Ceb E Syeb A Rzws I Uogt -Die jaws: 1" inches -Drive: via 3 gears -Dimensions: 550/360/H240 mm -Weight: 60 kg

Condition: used, Plate cutter, composite stone cutter, stone pincers, plaster stone pincers -for effortlessly cutting slabs and composite stones to length through the translation of the eccentric lever -great stability with low weight -exact guidance of the cutting knife -pendulum suspended upper knife for cutting materials that have a conical cross-section (curbs) -Max. for 6 cam stones Cjbob A Rz Ao E Sy I Uogt -Own weight: 10 kg

Condition: used, Power supply systems, construction site emergency lighting, escape sign luminaires, escape route luminaires, emergency and escape route lighting, emergency lights, escape routes -Emergency lighting with: charger and controller and batteries -Dimensions: 630/390/H260 mm -Weight: 25 kg Cjb E Syefhmn Us I Ujgt

Condition: used, Container turning device, welding turning device, welding turning device, welding device, welding turntable -Max. Diameter: 430 mm -Drive: 0.18 kW -Speed: min. 0 mm/min -Speed: max. 1190 mm/min -adjustable: electronically -Foot switch Cgsbob A Npte E Sy I Uot -Dimensions: 1100/600/H1600 mm -Weight: 166 kg

Condition: used, Pressure device, measuring device -with split pointer Cgeb E Sy Iob A Rlyo Uet -Max. Pressure: 20 bar -High pressure hose -Dimensions: 400/160/H200 mm -Weight: 4 kg

Condition: used, Tapping machine, pipe thread cutter -for: pipe size max. 2 inches -Die jaws: 2" inches -Antrie: via 3 gears -Dimensions: 550/360/H240 mm -Weight: 55 kg Ceb E Sy Isb A Iwce Uegt

Condition: used, PTO shaft, cardan shaft -Flange: Ø 120 mm -Toothed shaft: Ø 50 mm -min. Length: 665 mm Cob E Sy Ieb A Nfre Usgt -Max. Length: 780 mm -Weight: 14 kg

Condition: used, Tapping machine, pipe thread cutter -for: pipe size max. 2 inches -Cutting jaws: 1/4 "- 2" -Dimensions: 510/360/H240 mm -Weight: 64 kg Csb E Sy Iodm T Tbe Uogt

Condition: used, Double bench grinder, bench grinder, column grinder, column grinder -Double bench grinder: Type ES200 PW Cgjb E Sy Iog Eg U Rj Uot -Grinding wheels: max. Ø 230 mm -Motor: power 0.55 kW -Speed: 2800 rpm -Voltage: 380V -Dimensions: 510/320 / H1230 mm -Weight: 54 kg

Condition: used, Slat aprons, samurai aprons, machine covers, machine protection, protective cover, bellows, protective cover system, protection system, guide protection, guide cover -Bed width: max. 270 mm -Apron retracted: 410 mm Cgjb E Secumgrjy I Ust -Apron extended: 1930 mm -Drawing with the pictures -Number: 2x aprons available -Price: per piece -Dimensions: 430/410/H175 mm -Weight: 26 kg