Used International B414 Super for sale (13,419)

Condition: used, Functionality: fully functional, Year of construction: 2017, operating hours: 520 h, load capacity: 2,500 kg, lifting height: 4,700 mm, free lift: 1,560 mm, fuel type: electric, mast type: triplex, construction height: 2,235 mm, fork length: 1,200 mm, total length: 2,280 mm, drive type: Elektro, construction width: 1,195 mm, net weight: 5,200 kg, Electric 4-wheel forklift Load center: 500 ISO class: ISO class 2 = 1,000 - 2,500 kg Fpjln Tigsvdgfcs Tsg Mast type: Triplex Technical condition: very good Front tires Type: Superelastic Front tires Condition: 100% Rear tires Type: Superelastic Rear tires Condition: 100% Battery Volt: 80V Battery Ah: 775Ah Battery manufacturer: Factory overhauled in 2023 Battery year of manufacture: 2023 Description: Used device reconditioned by Toyota incl. new inspection and new acceptance according to FEM (ex UVV). Incl. brand-new ELM fork positioner suspended with fork brackets with lower rollers, cap. 2500 kg at 500 mm, width 1150 mm, fork brackets ISO 2328 cl. 2, opening range Y0Y1 mm: 211-911 mm, sideshift valve type FD 24 3, color RAL 9005, suspension ISO 2328 cl. 2 Sideshift valve, fork positioner, 3rd valve, 4th valve, rear working lights, front working lights, impulse control, full free lift, CE certificate,

Year of construction: 2008, operating hours: 19,280 h, Condition: used, machine/vehicle number: 5700A1, (internal no.: 181) consisting of: take-up unit, number of spools: 1, horizontal axis, stranding pitch: 4-25 mm, adjustable, traversing mechanism: UHING system, bow speed: max. 2,000 rpm, torsion: max. 4,000 rpm, external pre-strander, speed: max. 4,000 rpm, rotating cover strand pay-off unit, number of spool positions: 12, spool axis: vertical, mechanical band brake with dancer arm, rotating heart strand pay-off, number of spools: 1, mechanical band brake with dancer arm, control cabinet, SEI VT310W control system, Siemens S7, installation length: approx. 17 m, pay-off wire/strand diameter: 0.13 - 0.4 mm, heart diameter: 0.4 - 0.5 mm, max. rope diameter: 2.5 mm, tensile strength: 1960 - 2750 N/mm², total weight: approx. 13,350 kg (The stranding head was replaced in 2012 from DTAF500 to DTAR400) Fpjln Tigjwh Tyas Teg

Condition: used, mileage: 796,497 km, power: 220 kW (299.12 HP), first registration: 12/2009, fuel type: diesel, number of seats: 41, gearing type: automatic, emission class: euro5, color: red, brakes: retarder, Equipment: ABS, air conditioning, parking heater, General Engine: Mercedes-Benz Emissions standard: EURO5 Total seats: 41 Seats: 38+2+1 high/fixed Standing places: 44 Transmission: Automatic Safety * Retarder * ABS, ASR, EBS * Fog lights Passenger compartment * Auxiliary heating * Air conditioning * Driver microphone * Stroller parking space * Wheelchair ramp * Wheelchair space * Stop request button Audio, communication, electronics * Radio/CD Exterior * Matrix/destination system * Double-wide doors (number: 1) * Lifting/lowering system * Power steering Fpslnowippys Tig Tjg * Tachograph card * Sun visor * Electric exterior mirrors * Roof hatches * Roof vents Other * German vehicle registration document * Twin tires * Vehicle length: 11.95 m * Vehicle width: 2.55 m * Vehicle height: 3.40 m * Hubcaps * Tires: Front approx. 60% * Tires: Rear approx. 30% Our internal vehicle number: 11505 Errors excepted. Images and text may differ from the vehicle. Over 300 vehicles are always available.

Condition: new, Functionality: fully functional, Year of construction: 2024, operating hours: 5 h, load capacity: 3,500 kg, lifting height: 4,820 mm, free lift: 1,400 mm, fuel type: diesel, mast type: triplex, construction height: 2,350 mm, power: 45 kW (61.18 HP), fork carriage width: 1,190 mm, fork length: 1,200 mm, total length: 2,750 mm, engine type: DM02VA, STAGE-5, drive type: Diesel, construction width: 1,290 mm, net weight: 4,850 kg, Diesel forklift Load center: 500 ISO class: ISO class 3 = 2,500 - 4,999 kg Mast type: Triplex Transmission: torque converter Speed class: 20 Condition: New machine Technical condition: New Front tires type: Superelastic Front tires Size: 28-9 x15 Fpolevcfvdjn Tig Tsg Front tires Condition: 80 - 100% Rear tires Type: Superelastic Rear tires Size: 6.50x10 Rear tires Condition: 80 - 100% Sideshift, 3rd valve, 4th valve, rear working lights, front working lights, heating, load protection grille, full cab, full free lift, CE certificate, interior mirror, exterior mirror, rotating beacon, windshield wiper,

Condition: used, Year of construction: 2002, Field of application: Internal logistics Serial number: 3FD35-1xxxx Please contact ATS Norway AS for more information Please provide reference number upon request: 19534 Specifications: - 2002 model - Services taken by owner - Lifting height of 5200 mm - Weight 5740 kg Feln Tevyftqjig Tepg - Lifting capacity of 2600 kg - Diesel - 120 cm forks - Ready for delivery Description: Toyota truck with lifting capacity of 2600 kg Lifting height is 5200 mm. A little engine oil is dripping from the engine. Otherwise, it functions as it should, according to the owner. Video included. Delivery by appointment Total Weight: 5740

Condition: new, Panel saw HOLZ-HER 1255 SECTOR pro - Exhibition machine - Cutting height 2,200 mm Cutting length 5,300 mm Vertical perfection from HOLZ-HER The vertical panel saws from HOLZ-HER combine proven technology from over 50 years of experience and a rock-solid design that offers you a unique price-performance ratio. offer you a unique price-performance ratio. Your advantages: - Fully welded frame Extremely high rigidity - Precise cutting quality - Finished cut for immediate edge banding - Powerful saw motor with 4 kW output - Space-saving panel layout with a installation area from 4 m² - Smooth and ergonomic operation TRK extraction system (optional in all CE countries): Workstations must meet the highest requirements when it comes to health and safety. HOLZ-HER saws are among the cleanest and safest in the safest in the world. Accessories The extensive range of accessories extends from convenient digital dimension displays through to our our patented Super Cut plus scoring system. TECHNICAL DATA Vertical panel saw for cutting panel-shaped wood materials wood-based materials such as chipboard, MDF, veneer panels, multiplex, etc, veneer panels, multiplex etc. Basic machine: Completely welded frame with extremely high rigidity. Precise guidance of the saw beam / saw unit saw unit for an accurate cut. Manual feed feed for vertical and horizontal cutting. Cutting depth: max. 60 mm Saw beam: Sturdy saw beam guided on precision guides. Pneumatic locking of the saw beam at the top and bottom. Electrically monitored in vertical cut Saw unit: Smooth and ergonomic operation for plunging and and removal of the saw unit. Immersion lever can be lever can be folded down in the upper position for precise immersion of the saw unit. Generously dimensioned lever for easy pivoting. Housing cover opens the complete opens the complete saw unit for easy tool change change incl. ProLock quick-action chuck. Light cut-out: Riving knife can be retracted. Control panel: Efficient operation of the machine. Ergonomically positioned at eye level. Lower workpiece support: Sturdy, wear-free stainless steel support. Fpjln Tiou R Syisg Tog Support up to the cutting line: Narrow workpieces cannot tip or fall through Extraction: Effective extraction with two connections: Saw unit Ø 120 mm, frame end Ø 100 mm (with TRK variant) Lifting roller transport system: Manually liftable and lowerable rollers for easy and and gentle panel transport. Measuring tape: For displaying dimensions for horizontal cutting with three manual dimension displays: Absolute dimension from the lower workpiece support Absolute dimension from the middle workpiece support Serial cuts from the top edge of the panel This offer is an equipment package. The following items and options are already included in the price: - Sliding grid - Manual longitudinal stop for vertical cutting - Digital dimension display for horizontal cut - 3 adjustable stop points in the saw beam - TRK SH 2.200 suction device - Strip stop for recurring horizontal cuts - new exhibition machine -

Condition: used, Functionality: fully functional, Year of construction: 2018, operating hours: 3,830 h, load capacity: 4,500 kg, lifting height: 4,400 mm, free lift: 1,470 mm, fuel type: electric, mast type: triplex, construction height: 2,360 mm, fork length: 1,200 mm, total length: 3,000 mm, drive type: Elektro, construction width: 1,350 mm, net weight: 7,500 kg, Electric 4-Wheel Forklift Load Center: 500 ISO Class: ISO Class 3 = 2,500 - 4,999 kg Mast Type: Triplex Fpjln Tiowh Dprog Tjg Technical Condition: Very Good Front Tires Type: Super Elastic Front Tires Condition: 100% Rear Tires Type: Super Elastic Rear Tires Condition: 100% Description: Used truck factory-reconditioned by Toyota, including a new inspection and new approval according to FEM (ex UVV). Sideshift, 3rd valve, front work lights, roof cover, windshield, heating, full cab, impulse control, full free lift, CE certificate.

Year of construction: 2010, operating hours: 10,304 h, Condition: used, (internal no.: 182) consisting of: Processing material: stainless steel or galvanized steel wire, Pay-off wire dimensions: 0.08 - 0.25 mm, Strand diameter: 0.24 - 1.0 mm, Tensile strength: 1,500 - 3,000 N/mm², Stranding length: 1.2 - 10 mm, Strand/rope construction: 1x7, Operating direction: right to left, Mechanical dancer arm, Wire break detectors, Oil spray system, Pre-twisting unit, Two pulleys in 8" arrangement, Speed continuously adjustable, Overrun unit, Number of spools: 1, Spool axis vertical, Extension mechanism: cross-threaded double screw, Laying lay length: fixed, 3.97 mm, Torsions: 6,400 tpm, External pre-twister, Speed: 6,400 rpm, Wire lubrication: MICRO spray system with compressed air, drain unit, number of coil positions: 7, coil axis horizontal, main control panel, main cabinet, control SEI VT310W, installation length: approx. 640 cm Feln Tewh Tx Nsig Tjpg

Condition: used, mileage: 762,811 km, power: 260 kW (353.50 HP), first registration: 11/2008, fuel type: diesel, number of seats: 40, gearing type: automatic, emission class: euro5, color: silver, Equipment: ABS, air conditioning, parking heater, +++20x present+++ +++Collision damage+++ General Engine: Mercedes-Benz Emissions standard: EURO5 Total seats: 40 Seats: 31 + 8 + 1 high/fixed Standing places: 101 Transmission: Automatic Safety * ABS, ASR, EBS * Fog lights Passenger compartment * Auxiliary heating * Wood flooring * Air conditioning * Driver microphone * Stroller parking space * Wheelchair ramp * Wheelchair space Fpoln Tigswippto Tog * Stop request button * Interior camera Exterior * Hanover matrix/destination system * Double-wide doors, number: 4 * Lifting/lowering system * Power steering * Sun visor * Electric exterior mirrors * Roof hatches * Roof ventilators * Roof vents Other * Twin tires * Vehicle length: 17.94 m * Vehicle width: 2.55 m * Vehicle height: 3.10 m * Tires: Front approx. 60% * Tires: Rear approx. 40% * Tires: Rear approx. 30% Our internal vehicle number: 11542 Errors excepted. Images and text may differ from the actual vehicle. Over 300 vehicles constantly available.

Condition: used, Functionality: fully functional, Year of construction: 2015, operating hours: 19,678 h, load capacity: 12,000 kg, lifting height: 4,600 mm, fuel type: diesel, mast type: standard, construction height: 3,950 mm, fork carriage width: 2,500 mm, fork length: 1,800 mm, total length: 4,700 mm, drive type: Diesel, construction width: 2,600 mm, net weight: 19,780 kg, Diesel forklift Feln Tigju Dzk Ds Tspg Load centre of gravity: 600 Fork width: 200 mm Fork thickness: 75 mm Mast type: Standard Condition: Ready for use and fully functional Technical condition: very good Front tyres type: super elastic Front tyres size: 12.00-20 Rear tyres type: super elastic Rear tyres size: 12.00-20 Description: In addition to this Kalmar model, we have around 200 heavy-duty forklifts, compact forklifts, forklifts & side loaders in our warehouse in Hamburg and Gdansk. Visit our homepage - sago-online Hire purchase & financing at favorable conditions are always possible for us. We are also happy to buy your used vehicle freely, even without you purchasing a vehicle from us. Our owner, Mr. Peter Sawitzki, will be happy to give you detailed advice on this DCG120-6 P.S.: Our forklift master workshop specializes in repairs, maintenance, overhauls and special construction for forklifts from 8 tons. We would also be happy to exhibit your vehicle for commission sale. Side shift, fork positioner, Heating, full cabin,

Condition: used, mileage: 295,000 km, Year of construction: 2008, Serial number: WMA30SZZ38W12xxxx Please contact ATS Norway AS for more information Please provide reference number upon request: 19323 Specifications truck: - 2008 model - About 295,000 km - Automatic transmission - Euro 4 engine - 480 Hp - Front suspension: Parabolic - Rear suspension: Air - Lift and turn on 4 axles - Tip - Fasteners in the box - Internal Width in the box: 2,416 m - Internal length in the box: 5,276 m - Tires (see pictures) - Plow surface plate - Extra hydraulics at the front - Plow rigged w/ joystick - Climate/ac - Radio - Diesel heater Fpjln Tigsvg At Uj Tog - Light - Service history - Ready for delivery Specifications 2620 HMF crane: - 2013 model - 26 T/M crane - 6 hydraulic extensions - 2 Outriggers - Scheme for grab - Grab is not included - Remote control - Ready for delivery Description: only one owner since new !! The truck is fully equipped with a joystick inside. Plow plate included. (but not pictured) The crane has a reach of 17 meters and is set up for grab. Errors and omissions may occur. Ready for delivery. Km: 295000 HK: 480 Technical approved: Yes EU-approved until: 08.07.2025 Own weight: 17670 Total Weight: 35000 Payload: 17255 Width: 255 Length: 899 Euro: 4 Gearbox: Automatic

Condition: good (used), Year of construction: 2000, Ref. -No.: 10427 Manufacturer: OMV Type: MAV 412 Year of construction: 2000 Type of control: CNC Control: HEIDENHAIN TNC 426/430 Storage location: Halberstadt Country of origin: Italy X-Travel: 1200 mm Foln Tigjwiaaij Tepg Y-Travel: 850 mm Z-Travel: 800 mm B-Axis: +/- 95 ° C-Axis: 0,0001 ° NC swivel rotary table: 520 O Table Load: 3000 kg Table surface: 2300 x 980 mm Tool Taper: HSK 63 Tool Piece Magazine With: 20 Pcs./pcs. Spindle Speed: 0 - 16.000 RPM Turning Speed Range - Stepless: 0 - 20.000 mm / min Drive Capacity - Spindle Motor: 26 kW Total Power Requirement: 36 kW Weight Of The Machine Ca.: 17 t Dimensions Of The Machine Ca.: 5,4 x 4,4 x 3,1 m Further information: Operating hours: 32500 h Spindle hours: 10000 h - IKZ (internal cooling) - Milling spindle overhaul: Motor winding, bearing, tool clamp (2022) - AXA FSB400 chip conveyor (year 2021) - Compressed air preparation renewed (2023)

Condition: used, Functionality: fully functional, Year of construction: 2017, operating hours: 3,750 h, load capacity: 3,000 kg, lifting height: 4,700 mm, free lift: 1,650 mm, mast type: triplex, construction height: 2,260 mm, fork length: 1,200 mm, total length: 2,800 mm, drive type: Treibgas, construction width: 1,250 mm, net weight: 4,740 kg, LPG forklift Load centre of gravity: 500 ISO class: ISO class 3 = 2,500 - 4,999 kg Mast type: Triplex Technical condition: very good Front tyres type: super elastic Front tyres condition: 100% Rear tyres type: super elastic Rear tyres condition: 100% Description: Factory-reconditioned used equipment including new inspection and new acceptance according to FEM (ex UVV). Side shift, Fpsln Tjv Rh Aisig Teg 3rd valve, rear work light, front work light, roof cover, windscreen, heating, full cabin, full free lift, CE certificate,

Condition: like new (used), Year of construction: 2016, operating hours: 19,765 h, travel distance X-axis: 2,600 mm, travel distance Y-axis: 1,100 mm, travel distance Z-axis: 900 mm, tool mount: 60 mm, rapid traverse X-axis: 80 m/min, rapid traverse Y-axis: 60 m/min, rapid traverse Z-axis: 60 m/min, rotational speed (max.): 10,000 rpm, workpiece weight (max.): 4,000 kg, total height: 3,162 mm, total length: 8,575 mm, total width: 5,730 mm, bar diameter: 160 mm, overall weight: 26,800 kg, tool length: 500 mm, CNC controller: Siemens 840D solutionline CELOS, ERGOline Axes X-axis travel mm: 2.600 Y-axis travel mm: 1.100 Z-axis travel mm: 900 C-axis degrees: C-axis direct drive B-axis degrees: swivel head (B-axis) Feed rates m/min: 80 / 60 / 60 Rapid traverse m/min: 80 / 60 / 60 Acceleration in the axes m/s2: 5 / 6 / 6 Fpoln Tigjwhk E Tj Tjg Worktable Number of pallets: 1 integrated with rotary pallet Table dimensions mm: 2.600 x 1.100 Max. workpiece weight kg: 4.000 Spindle Spindle speed rpm: 10.000 Milling/turning table nc Number of pallets: 1 left side Table dimensions mm: Ø1.050 Maximum workpiece size (D x H) mm: 1.100 x 930 x 3.200 Max. workpiece weight kg: 2.000 Table rotation speed rpm: 725 Drive power kW: 44 / 32 kW (40/100% ED) Tool system Tool holder: HSK-A100 Tool magazine slots: 60 Tool changer: Chain - Double gripper Max. Tool Diameter: 160 With occupied neighboring places mm: 115 Max. Tool Length mm: 500 Max tool weight kg: 12 Chip-to-chip time s: 7,5 Equipment Chip conveyor Swivel head Blowing air through spindle center selectable via M-function Signal lamp Mist collector 3D quickSET Coolant gun Oil skimmer Dynamic package (linear drive X/Y/Z axis) Ready for internal cooling (40/80 bar) OPTICAL TYPE PROBE SENSOR (RENISHAW) PROVIDED Blum laser NT Hybrid Internal cooling supply 40 BAR Rotating viewing window with laminated glass Package Mill / Turn Separation wall for 2 working spaces Cooling Cooling through the Spindle Center bar: 40 Tank capacity: 980 L Machine running times Under power: 61.760 Operating Time: 19.765 Basic machine dimensions / weight Length mm: 8.575 Width mm: 5.730 Height mm: 3.162 Weight kg: 26.800

Condition: used, mileage: 642,385 km, power: 260 kW (353.50 HP), first registration: 10/2008, fuel type: diesel, number of seats: 40, gearing type: automatic, emission class: euro5, color: silver, Equipment: ABS, air conditioning, parking heater, +++20x present+++ +++Collision damage+++ General Engine: Mercedes-Benz Emissions standard: EURO5 Total seats: 40 Seats: 31 + 8 + 1 high/fixed Standing places: 101 Transmission: Automatic Safety * ABS, ASR, EBS * Fog lights Passenger compartment * Auxiliary heating * Wood flooring * Air conditioning * Driver microphone * Stroller parking space * Wheelchair ramp * Wheelchair space * Stop request button * Interior camera Exterior * Matrix/destination system Hanover * Double-wide doors, number: 4 * Lifting/lowering system * Power steering * Sun visor * Electric exterior mirrors * Roof hatches * Roof ventilators * Roof vents Other * Twin tires * Vehicle length: 17.94 m * Vehicle width: 2.55 m * Vehicle height: 3.10 m * Tires: front approx. 30% * Tires: rear approx. 30% * Tires: rear approx. 30% Our internal vehicle number: 11541 Fjlnewippmo Tig Topg Errors excepted. Images and text may differ from the vehicle. Over 300 vehicles constantly available.

Condition: new, Precision master lathe and traction spindle lathe Make: GDW Model: LZ 280 VS comfortline Condition: new machine with infinitely variable speed control and infinitely variable feed control to the highest safety standard tip height: 165 mm Centre distance: 670 mm Spindle bore: 43 mm standard equipped with: The basic price already includes the latest display generation "comfortline", which contains many innovations and simplicity: - 9'' TFT colour screen - Technology memory for 99 tools - Oriented spindle stop via teach-in button - Input of constant speed or constant cutting speed (V = c) - Speed limitation selectable - Error and status display in plain text - Feed rate and thread pitch input by means of image-supported masks - Thread cutting therefore does not require any Change wheels more exchanged or even be purchased in addition to all the usual to be able to cut threads! is still included in the standard: - LED machine light, integrated in machine casing - Quick-change tool holder size A with turning tool holder - Leadscrew disconnection with key - Braking device for main drive - Feed protection hood movable with limit switch monitoring - Spaeneschutz rear wall removable Feln Tscunqgsig Tjpg - Spray guard cover movable - Spa tub can be pulled out - Single bed stop (fixed stop lengthwise) - centralized lubrication - Reducing sleeve for main spindle internal taper ME 50/MK 3 - Protective flange for spindle

Condition: used, mileage: 332,670 km, Year of construction: 2015, Serial number: VF6MFF5VR5352xxxx Please contact ATS Norway AS for more information Please provide reference number upon request: 17322 Fpjlnjvg R Dne Tig Teg Specifications: - 2015 model - 332,670 km - Eu approved to 08.11.2025 - Euro 5 - 150 Hp - 2 seats - Automatic transmission - Cruise control - Rear view camera - Internal width: 1,741 m - Internal length: 3,602 m - Internal height: 1,867 m - 1970 kg Net weight - Service history - Climate/ac - Light - Radio - Video - Delivery by agreement Description: All services taken at brand dealer. Everything works says the owner. Delivery by agreement Km: 332670 HK: 149 Technical approved: Yes EU-approved until: 08.11.2025 Own weight: 1970 Total Weight: 3500 Payload: 1455 Width: 207 Length: 619,8 Inside width: 1741 Inside lenght: 3602 Inside hight: 1867 Kw: 110 Euro: 5 Gearbox: Automatic

Condition: good (used), Year of construction: 2009, Ref. -No.: 10286 Manufacturer: STARRAG HECKERT Type: HEC 1600 Athletic Year of construction: 2009 Type of control: CNC Fpjln Tigewh U Tbs Tog Control: Siemens Sinumerik 840 D Storage location: Halberstadt Country of origin: Schweiz Machine-No.: 24139 X-Travel: 2800 mm Y-Travel: 2100 mm Z-Travel: 1900 mm Table Dimensions (Lengthxwidth): 2 x 1.250 x 1.600 mm Table Load: 8.000 kg Max. Tool Weight: 35 kg Workpiece Diameter At Full Load: 110 mm Tool Piece Magazine With: 240 Pcs./pcs. Turning Speeds: 20 - 9.000 RPM Tool dimensions (with occupied adjacent spaces): 125 mm Rapid Travel X/Y/Z: 40.000 mm / min Weight Of The Machine Ca.: 35 t Numbers Of Pallets: 2 pallet change time: 60 s Further information: internal coolant supply

Condition: used, Functionality: fully functional, Year of construction: 2017, operating hours: 4,590 h, load capacity: 2,500 kg, lifting height: 5,000 mm, free lift: 1,675 mm, mast type: triplex, construction height: 2,245 mm, fork length: 1,200 mm, total length: 2,700 mm, drive type: Treibgas, construction width: 1,150 mm, net weight: 4,200 kg, LPG Forklift Load Center: 500 ISO Class: ISO Class 2 = 1,000 - 2,500 kg Mast Type: Triplex Technical Condition: Very Good Front Tires Type: Super Elastic Front Tires Condition: 100% Rear Tires Type: Super Elastic Rear Tires Condition: 100% Description: Used Toyota factory-reconditioned truck, including a new inspection and new FEM (ex-UVV) approval. Sideshift, 3rd valve, front work lights, roof cover, windshield, full free lift, CE certificate. Fpjln Towh Dplsig Tog

Condition: new, The special construction of the Multi Grind makes it possible to combine the functions of cylindrical, flat and tool grinding in one machine. With external cylindrical grinding, the workpiece is either clamped on one side or supported between centers in the stable tailstock. An internal grinding device can also be attached to the headstock and light surface grinding work is also possible with this model. With the additional tool grinding function area, you can use the Multi Grind to machine the cutting edges of a large number of tools. Foln Tijuyid Reg Tepg

Condition: new, Precision master lathe and draw spindle lathe Make: GDW Model: LZ 280 VS-G basicline Condition: new machine with infinitely variable feed control to the highest safety standard Centre height: 165 mm Centre distance: 670 mm Spindle bore: 43 mm standard equipped with: GDW control panel with feed potentiometer - Display of the travel direction - Display of spindle speeds - Teach-in for traverse path during thread cutting - Input of feed and thread pitches - Thread pitches Metric, inch, module, DP GDW 3-axis positioning display - 6" TFT colour display - Radius / diameter display - Tool memory for 100 tools - Changeover mm / inch - Axle coupling Z / Zo - cone calculation - pocket calculators - Graphical input help - USB port - Automatic standby mode is still included in the standard: - LED machine light, integrated in machine casing - Quick-change tool holder size A with turning tool holder - Lead screw disconnection with key - Braking device for main drive - chuck guard movable with limit switch monitoring Fpjlofbmlien Tig Tsg - Removable chip guard rear panel - Spray guard cover movable - chip tray can be pulled out - Single bed stop (fixed stop lengthwise) - centralized lubrication - Reducing sleeve for main spindle internal taper ME 50/MK 3 - Protective flange for spindle head DIN 55027-5 - 2 fixed centering points DIN 806-MK 3 - Set of operating tools with tool bag, set of keys, oil press - 5 Spare shear pins - 2 Operating instructions

Condition: used, Functionality: fully functional, Year of construction: 2017, operating hours: 4,360 h, load capacity: 2,500 kg, lifting height: 5,000 mm, free lift: 1,675 mm, mast type: triplex, construction height: 2,245 mm, fork length: 1,200 mm, total length: 2,700 mm, drive type: Treibgas, construction width: 1,150 mm, net weight: 4,200 kg, LPG Forklift Load Center: 500 ISO Class: ISO Class 2 = 1,000 - 2,500 kg Mast Type: Triplex Technical Condition: Very Good Front Tires Type: Super Elastic Front Tires Condition: 100% Rear Tires Type: Super Elastic Rear Tires Condition: 100% Description: Used Toyota factory-reconditioned truck, including a new inspection and new FEM (ex UVV) approval. Fjln Towh Dpfjig Tjpg Sideshift, 3rd valve, 4th valve, front work lights, roof cover, windshield, full free lift, CE certificate.

Condition: used, Functionality: fully functional, Year of construction: 2017, operating hours: 2,120 h, load capacity: 2,500 kg, lifting height: 5,000 mm, free lift: 1,675 mm, mast type: triplex, construction height: 2,245 mm, fork length: 1,200 mm, total length: 2,700 mm, drive type: Treibgas, construction width: 1,150 mm, net weight: 4,200 kg, LPG Forklift Load Center: 500 ISO Class: ISO Class 2 = 1,000 - 2,500 kg Mast Type: Triplex Technical Condition: Very Good Front Tires Type: Super Elastic Front Tires Condition: 100% Rear Tires Type: Super Elastic Rear Tires Condition: 100% Description: Used Toyota factory-reconditioned truck, including a new inspection and new FEM (ex UVV) approval. Fpeln Tigewh Dn Uo Tsg Sideshift, 3rd valve, front work lights, roof cover, full free lift, CE certificate.

Condition: used, Functionality: fully functional, Year of construction: 2018, operating hours: 4,210 h, load capacity: 3,000 kg, lifting height: 4,700 mm, free lift: 1,650 mm, mast type: triplex, construction height: 2,260 mm, fork length: 1,200 mm, total length: 2,800 mm, drive type: Treibgas, construction width: 1,250 mm, net weight: 4,740 kg, LPG Forklift Load Center: 500 ISO Class: ISO Class 3 = 2,500 - 4,999 kg Mast Type: Triplex Technical Condition: Very Good Front Tires Type: Super Elastic Front Tires Condition: 100% Rear Tires Type: Super Elastic Rear Tires Condition: 100% Description: Factory-reconditioned used truck including a new inspection and new approval according to FEM (ex UVV). Fpjlnswh Dn Is Tig Tjg Sideshift, 3rd valve, rear work lights, front work lights, roof cover, windshield, full free lift, CE certificate.

Condition: used, Functionality: fully functional, Year of construction: 2018, operating hours: 3,250 h, load capacity: 3,000 kg, lifting height: 4,700 mm, free lift: 1,650 mm, mast type: triplex, construction height: 2,260 mm, fork length: 1,200 mm, total length: 2,800 mm, drive type: Treibgas, construction width: 1,250 mm, net weight: 4,740 kg, LPG forklift Load centre of gravity: 500 ISO class: ISO class 3 = 2,500 - 4,999 kg Mast type: Triplex Technical condition: very good Front tyres type: super elastic Front tyres condition: 100% Rear tyres type: super elastic Rear tyres condition: 100% Description: Factory-reconditioned used equipment including new inspection and new acceptance according to FEM (ex UVV). Side shift, 3rd valve, 4th valve, rear work light, front work light, roof cover, windscreen, heating, full cabin, full free lift, CE certificate, Fpelswh Dnzjn Tig Tsg