Used Himoinsa Hpw 45 for sale (25,108)

Condition: used, Year of construction: 2013, operating hours: 2,720 h, mast type: telescopic, fuel type: diesel, color: blue, axle configuration: 4x4, Equipment: all wheel drive, General information Field of application: Construction Drivetrain Drive: Wheel Weights Empty weight: 6.812 kg Dcjlqet Svhfo Rpc Ujg Functional Lifting capacity: 227 kg Working height: 1.570 cm Condition General condition: good Technical condition: good Visual appearance: good Other information EPA Marked: yes Max. horizontal reach: 1120 m Max swing of arm in degrees: 360 Max swing of platform in degrees: 160 Transport dimensions (LxWxH): 8.48 x 2.3 x 2.49 Additional information Please contact Sales Department Collé Sittard for more information

Condition: new, bore capacity in steel (diameter) 45 mm throat 230 mm bore stroke 125 mm spindle taper ISO 30 spindle turning speed range 75 - 1600 U/min max. milling cutter diameter 80 mm 560 mm Delq Rpsfg U S Tsc Uocg 230 mm table surface area 800 x 240 mm max. distance between table and spindle-nose 460 mm connected load frequency 230 V total power requirement 1,1 kW weight of the machine ca. 320 Kg dimensions of the machine ca. 1,0 x 0,8 x 1,45 m Drilling and milling machine - Cross Support - Cabinet - Swivel spindle head left / right 90 ° - Feed via hand crank

Year of construction: 2016, Condition: excellent (used), Offered is a cutter meat cutter DMS DMK 45 C2 45L Bj.2016 Complete V2A.6-er knife head. Technical data: Knife shaft speed:1500x3000 rpm. Bowl speed: 9/18 rpm. Separately switchable. Bowl capacity: 45 liters. Weight: approx. 380 kg. More on request. Dcelq Rpenbfbfoc Ujg Cash payment or prepayment. Sale only to traders , No warranty, no guarantee.

Condition: used, Functionality: limited functionality, Year of construction: 2013, operating hours: 3,173 h, lifting height: 15,900 mm, lifting power: 227 kg/m, fuel type: diesel,

Year of construction: 2010, Condition: like new (used), For sale from CW 47 Dslou Avm Roq Rpc Uscg It is a whole set, including a vacuum pump for transporting material and a conveyor. type E45.50 sequel Energy LxWxH: 1700 mm x 1090 mm x 2600 mm, weight 1750 kg motor 18 kW - 30 kW knifes of rotor 2x3 or 2x5 hole: 470 x 510 mm

Condition: excellent (used), Year of construction: 1994, Functionality: fully functional, working width: 460 mm, planing height: 260 mm, working width 460 mm working height 260 mm 4 heads three feed speeds 6 / 12 / 24 m/min ATS - Simatic spindle diameter 50mm engine power: 1 - 22 kW 2/3 - 22 kW 4 - 22 kW spindle speed 6000 rpm spindles with double bearings table lubrication - pump with oil spray frequency regulation feed motors - 7.5 kW in total year of production 1994 complete technical documentation with electrical diagram total energy demand 74 kW Dslq Rpoudwi Hoc Uscg the machine currently has a set of 450/250 mm heads machine is ready to work possible machine tests at our company headquarters country of origin: Germany

Condition: new, Year of construction: 2024, Genie Z-45FE hybrid articulated boom lift, new, used, demonstration machines available Djlq Rpsrnqpwec Uscg

Condition: new, 35 (600) mm 35 (900) mm L-beam 50 x 50 x 5 (800) mm T - beam - web outwards 60 x 7 (600) mm Axis diameter 50 mm work speed 4,5 m/min total power requirement 1,5 kW weight of the machine ca. 0,4 t dimensions of the machine ca. 1,1 x 0,8 x 1,5 m Profile bending machine with: - Foot pedal right / left Dcjlq Rpcefv H Ets Ujg - Recording: wave 50mm - with digital display - hardened special steel shafts - 1 set of standard rollers - Lower rollers are driven - Upper roll up and down hydraulically deliverable - Horizontal and vertical operation - Engine with braking device

Condition: refurbished (used), Used, complete reconditioned, 1 year warranty, plate size 500 x 500 mm, 20-45 plates, open spout, 20 mm cake thickness, pressure max. 15 bar, capacity approx. 70-190 liters, dimensions 2000 - 3000 x 1000 x 1400 mm, weight approx. 1300 kg, hand or motor hydraulics, drip tray, filtrate, with or without filter cloths Dslq Rpefbbpmec Uocg

Condition: used, Year of construction: 2013, Article: Rotary transfer machine Manufacturer: Pfiffner Type: Hydromat HB 32-45/16 CNC Yob: 2013 Electro-hydraulically controlled, fully automatic Extract from offer: Coolant system with chip conveyor and Knoll vacuum rotation filter High pressure pump 50 bar Dcsleruvaqoq Rpc Ujg Second coolant ring Water cooler type 1600 Collets type B32-45 UP Control: Siemens Sinumerik 840D - CNC / S7-PLC incl. modem (for teleservice) 1 bar loading magazine type IEMCA: bundle loader (yob. 2011) 1 Sawing unit: Saw blade D250mm 2 Feed unit VE 26/80-HSK: Spindle stroke max. 80mm; spindle speed max. 7200 rpm; drive power up to 2.2kW; HSK 32 2 Vertical support 26/80 with 36° angular position 2 drilling head 26/80-HSK: HSK 32 1 feed unit VE 36/100-HSK: spindle stroke max. 100mm; spindle speed max. 5430 rpm; drive power up to 2.2kW; HSK 40 4 Feed unit VE 36/100-HSK internal cooling: Spindle stroke max. 100mm; spindle speed max. 5430 rpm; drive power up to 2.2kW; HSK 40; central coolant supply 6 Drilling head 36/1000-HSK: HSK 40 2 CNC X-Y-Z turning device outside the collet disc: NC 26/100 pick-up unit; 2 deburring spindles 1 CNC horizontal cross slide 26100-HSK: X/Y stroke 1 CNC feed unit VE 36/100-HSK internal cooling: spindle stroke max. 100mm; spindle speed max. 5430 rpm; drive power up to 2.2kW; HSK 40; central coolant supply 2 CNC turning unit 50/100-PSK: with ES-PDK-12 facing head (slide-in 2 tool holders); Z-axis 100mm; X-axis 12mm; n max. 5000 rpm; 4kW 1 turning unit WDE 30/60 1 turning tube with insertion bar 3 chip breaker valve SBV-100 Tool monitoring Please, contact us for getting more information and pictures on mail(at) or *

Year of construction: 2023, Condition: new, a very good thread rolling machine rolling pressure 45 t max. roll diameter 100 mm max. roll diameter: 230 mm dimension: 2150 x 1850 x 1550 Dolqopaixke Rpc Uecg motor 15 kw

Condition: used, Year of construction: 2005, Functionality: fully functional, cutting width (max.): 1,300 mm, saw blade diameter: 500 mm, table length: 3,400 mm, height adjustment type: electric, worktable length: 3,400 mm, power: 5.5 kW (7.48 HP), Panel saw Dcjlq Rpevnrmyjc Ujg Manufacturer: Altendorf Type: F45 Elmo CE Year of manufacture: 2005 Carriage length: 3,400 mm Cutting width: 1,300 mm Cutting height: approx. 171 mm Max. saw blade diameter: 500 mm Speed: 2,000 - 6,000 rpm Cutting width adjustment: Electric Motor brake: Yes

Condition: like new (used), Year of construction: 2008, SPECIFICATION KB-45 Cutting capacity 455mm Maximum working height 255mm Table 600 x 500 mm Tilt 4 ways up to 15° Saw blade length 3490mm Saw blade width 3-16mm Saw blade speed 25-115m/min Butt welder capacity 3-16mm Motor size 1HP Weight 285 Kgs Height 2020mm Width 1100mm Depth 660mm STANDARD FEATURES Overload switch Single-phase / 3-phase supply Dcelq Rpcju Rdr Ro Uog Built-in saw blade and tire cleaning brush Saw blade welder, blade shear and grinder Slotting table Low-voltage halogen lamp Mitre guard for angled cuts Quick rip fence for straight cuts

Condition: new, pressure 4,5 kN stroke 40 mm throat 95 mm Working height from to 95 - 240 mm table surface area 160 x 110 mm spindle diameter 25 mm weight of the machine ca. 24 Kg dimensions 160 x 230 mm Direct-acting pneumatic presses bring the full pressure performance over the entire stroke length. You will Dslsfv Av Ssq Rpc Uecg above all used when long-stroke parts are machined with constant force Need to become. Convincing technology • Long and precise spindle guide for maximum dimensional accuracy • Hardened and ground piston rod for practically unlimited service life • Double-acting cylinders with end position cushioning on both sides • Double guide rings in the piston, constant and quiet running • Oil resistant sealing elements Special features of the PND series • Spindle secured against twisting • Spindle return on the PND 85/S only via a cylinder chamber additional air savings • Easy, quick and precise working height adjustment in 2 steps: – Basic setting by simply loosening the clamping screws on the stand – Precision fine adjustment via the stroke limiting ring on the piston rod Additional benefit: Faster cycle time and air savings

Condition: good (used), Eccentric press Stroke: 55 mm Ram adjustment: 8 – 96 mm Turn: 50 1/min Djlqjg Uf D He Rpc Ujcg Max force: 45 t Weight: 2550 kg

Condition: used, Year of construction: 2022, Side plates Working width 3.0 m Transport width 3.0 m Rear scraper / prism roller Ø 45 cm with rigid three-point tower Working width 2.9 m / transport width 3.0 m Tine attachment 3.0 m 3-beam, rigid, line spacing approx. 15 / cm, complete with long Dcjlqst Dv N Tj Rpc Ujg

Condition: good (used), Year of construction: 2016, overall weight: 925 kg, volume flow: 82.8 m³/h, pressure (max.): 10 bar, Equipment: type plate available, PROD - ALUP TYPE - ALLEGRO45 Djlqsrbgw Rj Rpc Ujcg S/N - API125484 YEAR - 2016 POWER (kW) - 45 OUTPUT. (m3/min) - 6.9 CIS (bar) - 10 WAVE - yes

Condition: excellent (used), Year of construction: 2015, operating hours: 8,000 h, travel distance X-axis: 1,100 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 610 mm, controller manufacturer: HEIDENHAIN, controller model: I TNC 530, spindle nose: SK 40, Equipment: rotational speed infinitely variable, Machine details Stock-No. 1105-04045 Type of machine Machining Center - Vertical Make FEELER Type VMP 45A Year of manufacture 2015 Type of control CNC Storage location FRANCE Country of origin taiwan Delivery time immediately Freight basis EX WORK Technical details x-travel 1100 mm y-travel 610 mm z-travel 600 mm tool taper BT 40 spindle drive 18.5 kW spindle turning speed range 60 - 10000 rpm tool change unit 30-fold BT 40 tool changing time 4 sec Dcolqjvkgf Nj Rpc Ueg table-size 1200 x 600 mm table load capacity - central/maximum 1100 kp rapid travel x/y/z 24 m/min feeds x/y/z -stepless 20000 mm/min total power requirement 40 kVA weight of the machine approx. 8 t Additional information CNC control HEIDENHAIN TNC 530 I HSCI MACHINE LIKE NEW complete covering, A.T.C. for 30 tools BT 40 COOLING TROUGHT THE SPINDLE 20 BARS TABLE 1200 X 600 18 KW 10000 RPM

Condition: new, 4.5 mm multi-axis springs and wire forms generator, featuring up to 16 axis, including wire rotation, one motor per slide, OD control and other nice features Dolqoi Ikz Us Rpc Uscg

Condition: ready for operation (used), Functionality: limited functionality, To be sold in a package: HURCO BMC 30 Machine number: BK-9-002-020 Year of manufacture: 1990 HURCO BMC 45M Machine number: 92001097BB Year of manufacture: 1997 The machines can be inspected but not put into operation. Dcolq Rpjt Takaoc Usg Freight basis: ex works Location: 36110 Schlitz-Bernshausen Delivery time: immediately

Condition: reconditioned (used), Functionality: fully functional, Year of construction: 2014, operating hours: 11,500 h, load capacity: 4,500 kg, lifting height: 4,480 mm, free lift: 160 mm, load center: 500 mm, fuel type: diesel, mast type: telescope, construction height: 3,050 mm, tire condition: 60 %, front tire type: SE, rear tire type: SE, Equipment: cabin, trailer coupling, Viewing and test drive possible on site! Djlq Rpcsvb D H Eo Uocg Diesel front loader STILL RX70-45 Year of construction 2014 Operating hours approx. 11,500 h Refreshed paint Technology Workshop tested FEM test NEW SE Black tires Tele / double mast Overall height 2,850 mm Free lift 160 mm Nominal stroke 4,080 mm Basic load capacity 4,500 kg Fork carriage 3A Cab with IWS brush door, front, roof and side windows Additional double hydraulics for Tele Hydr. actuation mini lever (4 levers) Driver's seat MSG65 imitation leather Drive control single pedal Mechanical parking brake Working lights front top Rotating beacon and rear reversing light Attachment at extra cost

Condition: new, capacity 90 degrees: round 510 mm capacity 90 degrees: square 450 mm 650x450 band speed 15 - 100 m/min table height 844 mm dimensions of saw-band 5320 x 34 x 1,1 mm total power requirement 3,0 kW weight of the machine ca. 2,1 t dimensions of the machine ca. 1,9 x 2,87 x 1,3 m Dcelq Rpcsd Iipme Ueg PROMOTIONAL PRICE!!! 2-column double miter band saw K-tech DG 62/45 HA-I • 2-column miter saw • Solid, yet easy to use • Material height sensor (automatic cut start detection) • Smooth running thanks to diagonal cutting, feed regulator + cutting pressure regulator • Solid material inlet roller • Removable chip tray (disinfection) • Energy-saving and low-vibration thanks to diagonal cutting • Control panel ergonomic, safe and free-standing • Frequency-controlled saw drive 15 -100 m/min. • Hydraulic cutting pressure control valve • Hydraulic control of saw frame and vice • LEDs for monitoring all safety functions • Large-sized wheels (520 mm) a. • Clear miter adjustment up to 60° Semi-automatic function: 1. Tension the material 2. Saw starts 3. Lowering in rapid traverse to the beginning of the material or the same for series cutting cut 4. Saw blade off 5. Raise the frame until it is just above the material 6. Vice opens

Condition: good (used), Year of construction: 2001, operating hours: 8,100 h, Functionality: fully functional, BEMA REKORD FCZ 45 D 6-axis CNC tube bending machine CNC control SIDAC W6 RAINBOW touch for 6 controlled axes Programmable on 4 levels Max. round tube lower die 8 - 42 x 2.5 mm (reinforced bending arm and software update) Delq Rpjt Au U Ssc Ujcg Upper die 38 x 1.5 mm Brass round tube lower roller 45 x 3 mm upper die 38 x 2.5 mm max. square tube steel lower die 35 x 1.5 mm upper die 25 x 1.5 mm smallest feasible bending radius with standard lower die holding shaft 22 mm Effective length 3350 to 4250 mm Operating hours on the day of data recording 8077 Item Tube bending tools

Condition: like new (used), Spare parts for Lisec frame bending system type: BSV-45, Length: 2040mm, Width: 65mm, Height: 22mm, Weight: approx. 20Kg, Dcolqoualqkj Rpc Uog

Year of construction: 2005, Condition: good (used), Functionality: fully functional, Single-screw extruder Manufacturer: KOMAX Type: Elipse PRO 45 Single screw Ø45mm 26LD Year : 2005 Motor: 15kW Dcsleu Rn T Ssq Rpc Usg 12800 operating hours