Used Ciata 200R/5/Di/M for sale (127,494)

Condition: reconditioned (used), Mortising machine, swing chisel mortising machine MAKA type DB 5 Cgolq Tjv Hm Nmskrpot with many mortising tools, see pictures Workpiece stop 2 pieces Stop rail right / left 2150 mm Workpiece blow-out 2x Foot switch Pneumatic workpiece clamping on the side 1 piece Pneumatic workpiece clamping from above 2 pieces Extraction connection D 120 mm Weight approx. 550 kg Dimensions approx. L x W x H = 1200 mm x 800 mm x 1500 mm (without stop rails) Note on used machines: • Errors in technical information and prior sale reserved. • Prices stated are pick-up prices from location - free loading! • The machines have been cleaned and function-tested. • All machines are purchased as seen without any claim to warranty. The buyer is free to inspect the machines on site. • Special agreements are only possible in writing. (We will only answer inquiries if you provide your address + telephone number!)

Condition: excellent (used), Year of construction: 2013, operating hours: 1,630 h, Functionality: fully functional, laser power: 60 W, working range: 1,330 mm, Equipment: documentation/manual, safety light barrier, For sale is a Zünd Eurolaser M-1200 with 1,630 operating hours and a camera system. We purchased the system in 2014 and have unfortunately not produced enough since then, so we want to sell it. The system is fully functional and can be tested on-site. Operating hours: approx. 1,630 hours Working area (W x L): 1,330 mm x 1,230 mm Dimensions (W x L x H): 2,730 mm x 2,010 mm x 1,600 mm Laser power: 60 watts Synrad Laser source: CO2 Speed: 1 - 1,414 mm/s (in 1 mm increments) Acceleration: max. 14.1 m/s² Cgelqowg Tb Uo Tkrpjt Including 2 x Teka extraction systems Accessories Black anodized grid plate with extraction holes / Acrylic surface with extraction holes Gray cutting mats, 2.5 mm Focus lens including lens holder, 1 x 7.5 / 1 x 5.0 Laserscout Position plus (LS-POS+ Crea) camera system for reading registration marks Universal module UM-S for recording Cutting, grooving, and milling tools UCT cutting tool including spring shoe and 2 knife holders Various knives for UCT Optiscout 7.0 software for production and design including computer System is located at ground level and has easy access to the loading yard. Disassembly and transport must be organized by the customer.

Condition: used, Year of construction: 2021, operating hours: 7,760 h, CATERPILLAR 966 M WHEEL LOADER, Year of manufacture 2021 7770 BS, Cjlswghw Djq Tkrpjgt Bucket capacity approx. 5.6 m³, Scale, Air conditioning Net plus 19% VAT

Condition: used, Field of application: Construction Please contact ATS Norway AS for more information Please provide reference number upon request: 19929 Cslq Tkev U R Icsrpogt Approximately 20-24 m long Unknown model year Unknown number of hours

Condition: used, Year of construction: 2020, operating hours: 2,442 h, 2020 | Doosan | Doosan DX140LCR-5 with PowerTilt OQ65 quickcoupler (without bucket) | Used Tracked Excavator | 2442 hours 📍Location: Germany, München 🚛 We Deliver to your destination – Estimate the shipping cost with our calculator! 💰 Buy Now for EUR 95000 or Make an Offer. Request payment at delivery for an affordable fee! (subject to approval)* 👷‍♂️ Inspected by an independent expert 84 inspection points 80 approved ✅ 4 imperfect ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: Condition is good for age, ready to work, but U/C rubber pads are worn and chiped and some other smaller maintenance needed ❓Want the Full Inspection Report, Extra Photos & a Video? 🔍 Search this on Google for full details!: "37601 Equippo" Cjlq Tkswchzuorpegt 💡 Why Buy from Us? ✔ Fully inspected machines ✔ Delivered to your jobsite ✔ Money-Back Guaranteed ✔ Safe payment methods with possibility to pay at delivery ❓Got machines to sell? Contact us for a free evaluation

Condition: used, mileage: 35,622 km, power: 212 kW (288.24 HP), first registration: 06/2023, overall weight: 18,000 kg, fuel type: diesel, color: black, axle configuration: 2 axles, gearing type: automatic, emission class: euro6, loading space width: 2,480 mm, loading space length: 7,100 mm, loading space height: 2,640 mm, Year of construction: 2023, Equipment: ABS, air conditioning, parking heater, Fahrzeugausstattung* 1 Bett * ABS * ASR * Automatik * Zentralverriegelung * CD * elektrische Fensterheber * Wegfahrsperre * Klimaanlage * lange Kabine * Scheibenbremsen * Nebelscheinwerfer * unabhängige Heizung * Bordrechner * Zusatzscheinwerfer * Radio * Serviceheft * Sonnenblende * Werkzeugkasten * Dachspoiler * Tempomat * getönte Scheiben * Achsentlüftung Cgslq Tkrewhig Nspet

Condition: excellent (used), Year of construction: 2004, chain mortising machine with additional unit made up of two horizontal routers for the execution of the handle and the key holes and two adjustable and motorised swinging units for the execution of slots vertical working unit: max work piece thickness 230 mm max work piece height 710/ 1050 mm vertical stroke length 150 mm horizontal stroke length 300 mm traverse head stroke 80 mm head tilting +/- 45 deg. vertical stroke of head stock bracket 250 mm headstock bracket tilting +/- 45 deg. max. workpiece height 1000 mm chain motor 2,2 kW, 400V, 50 Hz horizontal working unit: swinging unit no. 2 min/ max. longitudinal stroke 80/ 130 mm manual traversal stroke 140 mm pneumatic transversal stroke 140 mm swinging unit motor 0,18 kW, 400 V, 50 Hz router motor 1,8 kW, 400V, 50 Hz Celq Tjlpcffskrpsgt weight approx. 650 kg incl. pump for automatic chain lubrication incl. tools incl. manual Advise used machines: • Technical data without obligation, mistake and intermediate sale reserve. • Price is considered ex-location price • All articles or machines are bought as seen without any entitlement on warranty. • It is left to the choice of the buyer to view the machines before at its location. • Special arrangements are possible but only valid in written form. (We answer your inquiries only with stated address + telephone number!)

Condition: ready for operation (used), Year of construction: 2005, General Data Machine weight 270kg Main Drive Cgjlq Tkrjwbwzbopst Number of axis 6 This 6-axis FANUC M-16iB robot arm was manufactured in 2005. Ideal for automation tasks, it enhances precision and efficiency in operations. Consider the opportunity to buy this FANUC M-16iB robot arm. Contact us for more information. Application Types Robotics

Condition: used, Year of construction: 2020, operating hours: 8,400 h, CATERPILLAR 966 M WHEEL LOADER, Year of manufacture 2020, 8400 BS, Bucket capacity approx. 4.4 m³, Scale, Cjlswghw Rsq Tkrpsgt Air conditioning Net plus 19% VAT

Condition: used, Field of application: Construction Please contact ATS Norway AS for more information Please provide reference number upon request: 19927 Cgolqsv U R H So Tkrpjt Storage silo with feeder Unknown model year   4 m diameter 4 m straight wall, 2.0 m cone

Condition: used, Year of construction: 2006, Functionality: fully functional, 5-axis machining center (gantry milling machine) Manufacturer: EDEL Type: CP 3020 Year of manufacture: 2006 Control: HEIDENHAIN iTNC 530 Technical specifications: Travel paths x/y/z: 3,000 / 2,000 / 960 mm Gantry clearance y/z: 2,280 / 1,150 mm Rapid traverse x/y/z: 20/20/15 m/min Feed force per axis: 10,000 N A-axis swivel range +/-110°. C-axis swivel range: +/- 360. Powerful CYTEC milling spindle. Tool holder: HSK-A63. Speed: 12,000 rpm. Power: 27/32 kW (100%/40% duty cycle) Torque: 130/170 Nm (100%/40% duty cycle) Tool magazine: 52 - HSK-A63. Tool diameter: 105/130 mm Tool length: 300 mm Tool weight: 8 kg Tank volume: 800 L External coolant supply: 20 bar Internal coolant supply: 40 bar Weight: 27,000 kg Spindle hours: 500 h Colq Tjwcmz Tskrpegt (New spindle installed)

Condition: used, mileage: 254,936 km, power: 294 kW (399.73 HP), first registration: 04/2017, overall weight: 32,000 kg, fuel type: diesel, color: white, axle configuration: > 3 axles, gearing type: mechanical, emission class: euro6, total width: 2,550 mm, total height: 4,000 mm, Equipment: ABS, air conditioning, Body: Stetter AM9FHCLL 9m3 (Year of Manufacture: 2017) Leaf spring suspension ABS, EBS, Engine brake 2x differential locks Total weight: 32,000 kg / 34,000 kg Unladen weight: 13,815 kg Payload: 18,185 kg Cab features: 2 seats Mechanically opening sunroof, Power windows, Power heated rearview mirrors, Central locking, Radio/CD player, Digital tachograph, Comfort driver's seat Cslewhhynjq Tkrpjgt Exterior: Sun visor Tires: 1st axle: 315/80 R 22.5 2nd axle: 315/80 R 22.5 3rd axle: 315/80 R 22.5 4th axle: 315/80 R22.5

Condition: used, overall weight: 40,000 kg, axle configuration: 3 axles, loading space volume: 30 m³, first registration: 12/2022, total width: 2,550 mm, total height: 3,515 mm, Equipment: ABS, Mega steel tipper 30 m³ Cramaro electric roof Pivoting tailgate with center outlet Pneumonic locking and mechanical hook locking SAF axles Liftable first axle SAF outriggers Foldable rear underrun protection Reverse lights Celsvfzu Ueq Tkrpsgt Handwash water tank Loading pressure gauge Access ladder Unladen weight 6640 kg Further information upon request

Condition: used, mileage: 282,003 km, power: 294 kW (399.73 HP), first registration: 08/2003, overall weight: 35,000 kg, fuel type: diesel, color: white, axle configuration: > 3 axles, next inspection (TÜV): 05/2027, gearing type: mechanical, emission class: euro3, Year of construction: 2003, Equipment: air conditioning, Internal vehicle number: G200125 German vehicle On our yard in Kaufungen - Kassel, available immediately More INFO at * Luis Lucena (German, English, Spanish, French) *Viktoria Sologubova (Polish, Russian, Ukrainian, English)   MERCEDES BENZ ACTROS 3240 8x4 concrete pump Putzmeister BSF 42 Total permissible weight 35,000 kg 6,204 operating hours PUTZMEISTER BSF 42 End hose max. 4 m   Good technical condition!   Financing example: * Internal number: G200125 * Purchase price: 97,900.00 ¤ * Down payment: 10% * Term: 60 * Monthly rate: 1,514.67 ¤ Residual value: 19,980.00 ¤ Cjlq Tkrov Ttl Ispegt If you like the offer or want to adapt it to your needs, please contact us at Mr. Enchev. We look forward to your call       Errors excepted  We are happy to accept your used vehicle as a trade-in. Financing is possible directly from us. GOLEC NUTZFAHRZEUGE GMBH We speak: German, English, Spanish, Polish, Ukrainian, Russian, Bulgarian.   ----.

Condition: used, Year of construction: 1983, operating hours: 12,120 h, * Hitachi KH 125-2 duty cycle crawler crane * Year of manufacture: 1983 * 30 m boom * Service life: 12,000 h * Lifting capacity: 35,000 kg Cgolq Tkewgva Tsrpjt * More pictures and videos via WhatsApp * Information without guarantee and subject to prior sale.

Condition: good (used), Year of construction: 2005, 2005 5 Color 37x 52 cm Cjlq Tsvcnarjkrpsgt 87 mil. Alcolor Autoplate Prinect Classic Center Feeder - electronic draw mark control Blanket washing device PressControl Baldwin Automix Grafix Alphatronic 200 Delivery drum with Super Blue Location: Germany Available: immediately

Condition: used, Year of construction: 2006, A VL 5 oLT, built in 2006, is for sale ex-works. The machine can be inspected under power. Cslq Tkjup Tizerpjgt

Condition: used, mileage: 261,430 km, power: 294 kW (399.73 HP), first registration: 04/2015, overall weight: 32,000 kg, fuel type: diesel, color: white, axle configuration: > 3 axles, gearing type: automatic, emission class: euro6, total width: 2,550 mm, total height: 3,850 mm, Equipment: ABS, air conditioning, Body: Liebherr HTM 904 9m3 (Year of Manufacture: 2015) Leaf spring suspension ABS, EBS, Engine brake 2x differential locks Total weight: 32,000 kg / 34,000 kg Unladen weight: 14,040 kg Payload: 17,960 kg Cab features: 2 seats Mechanically opening sunroof, Power windows, Power heated rearview mirrors, Celewhhyzsq Tkrpjgt Central locking, Radio/CD, Digital tachograph, Comfortable driver's seat Exterior: Sun visor Tires: 1st axle: 315/80 R 22.5 2nd axle: 315/80 R 22.5 3rd axle: 315/80 R 22.5 4th axle: 315/80 R22.5

Condition: used, Year of construction: 1995, Max. cutting width: 5300 mm Max. cutting height: 2200 mm Saw blade diameter: 300 mm Max. processing thickness: 80 mm Saw blade bore: 30 mm Material support: Plastic battens, ejecting Measuring system: Scale Saw head pivoting: manual Saw feed: manual Extraction: external extraction Saw beam locking: manual Weight approx.: 1500 kg Dimensions: 6300 x 1500 x 2900 mm Motor power: 4.4 kW Storage location: Nattheim Colq Tkrjvvkqyepegt

Condition: used, Year of construction: 2022, operating hours: 11,300 h, Equipment: ABS, * CAT 938 M High Lift Wheel Loader * Year: 2022 * Service life: 11,300 hours * Central lubrication system * Air conditioning * Power: 140 kW Celqewgvayj Tkrpsgt * Weight: 16,200 kg * More pictures and videos via WhatsApp * Information without guarantee and subject to prior sale.

Condition: used, Year of construction: 1996, Max. cutting width: 5300 mm Max. cutting height: 2200 mm Saw blade diameter: 300 mm Max. processing thickness: 80 mm Saw blade bore: 30 mm Material support: Plastic battens, ejecting Measuring system: Scale Saw head pivoting: manual Saw feed: manual Extraction: external extraction Saw beam locking: manual Weight approx.: 1500 kg Dimensions: 6300 x 1500 x 2900 mm Motor power: 4.4 kW Storage location: Nattheim Celqjvvkq Ho Tkrpegt

Condition: used, Year of construction: 2022, Plus freight 4,000.00 € and installation and commissioning 5,000.00 € Grinding system B Sand 5 with partial lathe Working principle The panel is placed on the infeed table. It goes into the partial lathe and centered. It is ground in the grinding system, through and back. The panel is turned in the partial lathe. It is ground on the other side in the grinding system. Then there are two options: either the panel goes onto the outfeed table and unloaded or it comes back onto the infeed table and is unloaded there (the second option extends the working time). Grinding system equipment 1 upper grinding lamella roller suitable for surfaces. Power 3 kW; D 420 mm; L 1300 mm. Cross brush suitable for grinding the cross fibers. D 420 mm; L 300 mm. Power 1.1 kW. Cross brush suitable for grinding the cross fibers. D 420 mm; L 300 mm. Power 1.1 kW. 3 upper sanding discs for perfectly trimming the longitudinal and transverse wood fibers. Power 1.5 kW each; D 400 mm. Disc brush for beveling edges. The unit functions as a deep brush. After detecting the panel edges, it will follow the door edges. Power 0.75 kW; D 250 mm. Machine features: -The unique sanding system of this machine guarantees perfect wood sanding and/or intermediate sanding of the panels. -All tools are controlled by frequency converters. -All brushes are equipped with quick-release sanding strips without replacing the hub. -The discs are equipped with air bladders to optimize cleaning and service life. -Sanding discs are equipped with a Velcro fastening system. -The feed and rotation speed are PLC-controlled to prevent edge breakage. -High-quality sanding on 4 sides thanks to the system's constant removal rate. -Automatic and rapid unit changeover. - Constant throughput height, PLC and industrial software enable interlinking in a surface line. - Continuously variable speed of the discs, brushes and feed thanks to the fully equipped frequency converter. - Right/left rotation of the discs and brushes with different abrasive grits. - Individually driven feed of the discs, rollers and belts. - Additional adjustment of the brushes and discs to balance the use of the abrasive and to allow for changing the grinding pressure on the surfaces. - Strong support bed made of tubular steel guarantees the best rigidity, stability and flatness. - Planed upper support bed to ensure the best parallelism of the working surface for the grinding discs. - All unit carriages are designed with linear recirculating ball bearing guides, thus high load capacity and high precision. - Motorized feed belt controlled by a frequency converter, 0.55 kW. Machine doors equipped with safety devices. - Machine doors equipped with windows to observe the workpieces during operation. - Under the units, there are 80 mm rubber-coated pressure rollers to hold the workpieces in place during processing. · Low follow-up costs thanks to individual blade replacement. · Low running noise thanks to the enclosed system housing. · All units have suction housings with their respective suction supports. Cover plate with suction nozzle. · Completely encapsulated machine housing for a clean environment. Cgolq Tjvvkipokrpot

Condition: used, Year of construction: 1973, Storage location: Nattheim Cjlqevvkt Us Tkrpsgt

Condition: used, Year of construction: 2020, CNC-CONTROLLED MACHINING CENTER WITH MULTIFUNCTIONAL TABLE - WORK CELL VERSIONX400 CELLDrilling and milling made for you!The numerically controlled machining center is equipped with a wide range of milling/drilling tools to meet every need in the processing of wood and similar materials.- More powerful, with drilling spindles with 8,000 rpm and . Technology, the toughest spindle available on the market, with over 1,000 maintenance-free hours of use. Better and more comprehensively equipped, with various configuration options thanks to the multifunctional table to optimally equip the machine according to your needs. Easier and more understandable programming thanks to the integrated MAESTRO CNC CAD-CAM module. Easier to use: the work table is accessible at all times, the electrical cabinet and vacuum pump are integrated, and in the PRO SPACE configuration there are no guards. Supporting structure. The supporting structure consists of a particularly strong monolithic steel base, heavily ribbed and very rigid. The particularly wide support was specifically designed to give the machine stability, ensuring consistent precision regardless of the working conditions and eliminating the need to anchor the machine to the floor. The base forms a large and solid support for the mobile column: the work unit is thus equipped with a balanced, stable, and durable support that can withstand the most extreme stresses, ensuring higher quality performance and greater precision. The mobile gantry consists of a single, solid unit anchored to the base on both sides and slides on pyrotechnic guides with top-quality ball-return slides. The dual motorization along the X-axis ensures top performance even under demanding working conditions. The movement of the lower moving unit (X-axis) and the working unit along the rod of the moving unit (Y-axis) is achieved thanks to a rack/pinion transmission with helical teeth. this creates a greater tooth-to-tooth thrust which achieves greater acceleration and greater speed along the X and Y axes. The specially designed helical gearing ensures less wear on the mechanical components and less noise. The vertical Z axis is driven by a screw with ball return which ensures perfect balance with dynamic loading and strong acceleration and deceleration. The main milling unit is directly coupled to the Z axis carriage and ensures absolute quality of finishes as any vibrations are completely eliminated. Translation along the X-Y-Z axes is carried out by brushless motors driven by static inverters; These ensure: - Reduced processing times thanks to improved acceleration - Better positioning accuracy thanks to the high-resolution encoder - Zeroing of setup operations when switching on the machine thanks to absolute encoders - Zeroing of general maintenance operations since there are no brushes with the "brushless" system The management of the axis displacement and, in general, of the machine's working elements is carried out by an industrial NS module with digital D Colq Tkrjvvi N Ijpsgt

Condition: used, Year of construction: 1997, Maximum veneer thickness: 2.0 mm Minimum veneer thickness: 0.4 mm Composite material: Glue thread with piston heating Disc cutter: Yes, for conveying the veneer over the machine Type: Stationary Feed speed: 15 m/min Column projection: 620 mm Working height or feed table height: 90 mm Machine number: Approx. weight: 42 kg Dimensions: 700 x 350 x 400 mm Colq Tksvvi Udjrpjgt Storage location: Nattheim