Used Ciata T200/P for sale (2,617)

Condition: used, Feeding technology / Feeding system / Vibratory feeder / Sorting device / Spiral feeder Vibratory bowl feeder, sorting device / screw feeder with vibratory feeder for screwdriving technology Feeding system DEPRAG Type: 0622-P/0,75-1S No.: 1183884 2011 - 2012 The system was used to feed electrical plug contact pins. Product dimensions: Ø 4 mm, length 26 mm The pins are pre-stored in the material hopper, the feed belt conveys the pins into the bowl feeder as required. From the spiral conveyor with two sorting tracks, the pins are fed to the product turner. The product turner turns the product into the correct position and releases it for further processing. The unit comes from a prototype system, the external electrical control is not available and should be carried out by a PLC. Without conversion, suitable, for example, for the automatic and correctly positioned feeding of threaded pins up to M4 x 26. Unit consists of the following components: 1 piece DEPRAG belt hopper / feed conveyor Type: B 10 Serial no.: 1178200 Order no.: 415050A Year of manufacture: 2011 Filling volume: 10 liters Belt speed: 100 mm/min. Operating voltage: 24 Volt (DC) - Nubbed belt surface - Folding stainless steel chute Weight 11 kg 1 piece Spiral conveyor vibrating bowl KENDRION Type: OA C006.504101 / OA C006029 / KQF 465 B5 Bowl diameter top: 200 mm Pot diameter bottom: 100 mm Inner pot height: approx. 75 mm Sorting track width: approx. 5 to 8 mm - Vibrating bowl with two sorting tracks and two product outlets Operating voltage: 230 Volt, 50 Hz. 1 DEPRAG vibrator controller for the bowl feeder Type: SZG Controller 6 Serial no.: 35-006-000391 2 pieces FESTO product turner with 180° swivel range - 1 FESTO valve block CPV10-GE-MP-8 - 1 FESTO valve block CPV10-VI - Special pneumatic components (compressed air requirement approx. 6 bar) Dolinveh Ap Idoq Rjkl - 2 MURR basic modules type MVP12 - Complete unit mounted on a steel plate with 4 feet Space requirement L x W x H: 1150 x 520 x 860 mm Weight: 100 kg very good condition

Year of construction: 2022, Condition: new, machine/vehicle number: AN2301155, Atlas Copco P3500i power generator The Atlas Copco P3500i iP mobile power generator is a lightweight, efficient and reliable source of mobile power. Thanks to its high fuel efficiency and compact dimensions, the power generator is versatile for daily use, for frequent single jobs, typically for power tools as an inverter power generator or as an emergency generator. With good sound insulation, the emergency generator is very quiet and hardly louder than an electric razor. The emergency generator is equipped with a large fuel tank and therefore runs up to six hours before it needs to be refueled. Despite the large fuel tank, the emergency generator is compact and light enough to be transported across construction sites or stowed away to save space. The intelligent, variable speed control, together with the option of parallel operation, results in an efficient power supply with minimal fuel consumption, as the engine speed is adapted to the current load conditions. Key product features: Atlas Copco P 3500 i inverter power generator Pull starter Large fuel tank Engine oil level monitor Overheating protection Silenced hood, CE compliant noise level, quiet Power sockets Dolinvjl R Hz Seq Rekl Electric key start (12V) Inverter technology, stable voltage and frequency Instrumentation, voltmeter, hour meter Circuit breaker Wheels Engine alarm: low oil level, overload Intelligent speed control for fuel efficiency Connections for parallel operation (parallel operation kit with cables optionally available) Voltage 230V / 50Hz Peak power 3.3 Rated power 3.0 Tank capacity (l) 10.0 Starter type electric / cable Weight 45.0 Fuel Gasoline Max. Sound pressure level (LPA) at 7 m 63.0 Sound power level (LwA) 88.0 Sockets 2x Schuko 2P+G 16A | 2x Nema 240/120V Twist Lock

Condition: used, mileage: 406,238 km, power: 338 kW (459.55 HP), color: blue, brakes: retarder, gearing type: automatic, Year of construction: 2020, Equipment: ABS, air conditioning, cruise control, navigation system, = More options and accessories = - 12-volt socket - Electric windows - Remote central locking - Speed limiter - Refrigerator - Centre armrest - Radio with MP3 support - Sunshade Dkelinouufl Esvq Rol - Parking air conditioning = More information = Number of doors: 2 Fuel type: Natural gas

Year of construction: 2025, Condition: new, machine/vehicle number: AB2024, Pclass = working area X 1250mm x Y 1250mm x Z 25mm skyCUBE P laser processing center - the new Pclass, more productive with a larger work surface than laser cutting machine for your metals Dkslinsdvik Nsvq Rol Laser processing simple and high-precision - laser engraving, cutting at high speed and quality

Condition: like new (used), For Sale: EOS P 396 – Guaranteed Working Condition This EOS P 396 was originally purchased from EOS in 2022 and is now available for resale in fully guaranteed working condition. Before the sale, the machine is thoroughly inspected and revised by our experienced technicians to ensure top performance. The package includes: • 2 build frames • Hydac water cooler Additional accessories are available upon request. We offer transport in the original EOS packaging and provide professional installation services to ensure a seamless experience. Warranty and maintenance plans are available to suit your needs. Dkeletp Up Esinvq Rel For more information or specific requests, please don’t hesitate to contact us. About Inframotion 3D (IM3D) At Inframotion 3D B.V., we specialize in providing high-quality refurbished EOS SLS machines and unparalleled support. With our team of ex-EOS technicians, we are the only provider in the market offering a complete solution for used EOS equipment—including installation, maintenance, repairs, upgrades, and consumables. What sets us apart: • Guaranteed reliability: Every machine is inspected and revised before delivery. • End-to-end support: From transport and installation to tailored maintenance plans, we’ve got you covered. • Expertise: With years of experience in the SLS industry, we ensure that your machine runs at its best. • Exclusive offerings: Unique materials, accessories, and service plans designed specifically for EOS users. Choose IM3D for unmatched expertise, value, and service. Feel free to reach out to learn more about how we can support your SLS production needs!

Condition: used, mileage: 302,000 km, power: 302 kW (410.61 HP), overall weight: 32,000 kg, fuel type: diesel, color: white, axle configuration: > 3 axles, gearing type: automatic, loading space width: 2,470 mm, loading space length: 7,000 mm, Year of construction: 2016, first registration: 01/2016, Equipment: ABS, air conditioning, crane, SCANIA P 410 / 8x4 PLATFORM 7,00 m + CRANE + REMOTE CONTROL Accident-FREE IN GOOD CONDITION! ? YEAR OF PRODUCTION: 2016 ? MILAGE: 302 000 km EQUIPMENT: ? ABS ? EL. WINDOWS ? EL. MIRRORS ? POWER STEERING ? TACHOGRAPH ? AIRCONDITION PLATFORM: 700 x 247 cm (L x W) CAPACITY: 16 000 kg TOTAL WEIGHT: 32 000kg TIRE SIZE: 315/80R22,5 WHEELBASE: 195/340/135 cm SUSPENSION: SPRING CRANE: HIAB 244 E - 5 HIPRO + REMOTE CONTROL Dkelsvzfkfsinvq Rol TEL: * KUBA - POLSKI, ENGLISH, DEUTSCH, ITALIANO * SEBASTIAN - POLSKI, DEUTSCH, ITALIANO, ????? * LASZLO - MAGYAR * COSTEL - ROMÂN? (Romana facem toate formalitatile pt export inclusiv nr) Ref. nr: 90375

Condition: used, Electric hoist, crane, electric wire rope hoist, wire rope winch DEMAG type P 10 Serial no. 941 477 Year of construction 1962 Delinsr E Ht Hjvq Rekl Lifting capacity 2000 kg with 4 ropes Lifting height 5 meters Lifting speed 6 m/min. Fine lifting speed 1.3 m/min. Reeving 4/1 Motor power 0.6 / 2.6 kW Mains connection 380 Volt, 50 Hz - DEMAG hoist, type 19/11 K28P - Electric trolley DEMAG, type 13 / 6 K8 - 1 Travel speed approx. 19 m/min - Trolley for double T-beams, beam width 120 to 180 mm - Load hook for 4 load lines - Operating cylinder for the hoist with approx. 2.5 meter cable length Space requirement L x W x H 1400 x 900 x 500 mm Weight 350 kg Good condition

Year of construction: 2022, Condition: new, machine/vehicle number: AN2301155, Atlas Copco P2500i power generator The Atlas Copco P2500i iP mobile power generator is a lightweight, efficient and reliable source of mobile power. Thanks to its high fuel efficiency and compact dimensions, the power generator is versatile for daily use, for frequent single jobs, typically for power tools as an inverter power generator or as an emergency generator. With good sound insulation, the emergency generator is very quiet and hardly louder than an electric razor. The emergency generator is equipped with a large fuel tank and therefore runs up to six hours before it needs to be refueled. Despite the large fuel tank, the emergency generator is compact and light enough to be transported across construction sites or stowed away to save space. Dkjlol R Hy Asinvq Rjl The intelligent, variable speed control, together with the option of parallel operation, results in an efficient power supply with minimal fuel consumption, as the engine speed is adapted to the current load conditions. Key product features: Atlas Copco P 2500 i inverter power generator Pull starter Large fuel tank Engine oil level monitor Overheating protection Silenced hood CE compliant noise level, quiet Power sockets Inverter technology, stable voltage and frequency Engine alarm: low oil level, overload Speed control for fuel efficiency Connections and cables for parallel operation Voltage 230V / 50Hz Peak power 2.5 Rated power 2.3 Tank capacity (l) 4.0 Starter type pull starter Weight 27.0 Fuel Gasoline Max. Sound pressure level (LPA) at 7 m 63.0 Sound power level (LwA) 88.0 Sockets 2x Schuko 2P+G 16A | 2x Nema 120V 20A | 1x Nema 120V Twist Lock

Condition: used, mileage: 576,230 km, power: 338 kW (459.55 HP), color: blue, brakes: retarder, gearing type: automatic, Year of construction: 2020, Equipment: ABS, air conditioning, cruise control, navigation system, = More options and accessories = - 12-volt socket - Electric windows - Remote central locking - Speed limiter - Refrigerator - Centre armrest - Radio with MP3 support - Sunshade Doleuufgcjinvq Rjkl - Parking air conditioning = More information = Number of doors: 2 Fuel type: Natural gas

Condition: new, Year of construction: 2025, Pclass = working area X 1250mm x Y 1250mm x Z 25mm skyCUBE P laser processing center - the new Pclass, more productive with a larger work surface than laser cutting machine for your metals Djlinecwph Tevq Rekl Laser processing simple and high-precision - laser engraving, cutting at high speed and quality

Condition: good (used), Functionality: fully functional, mileage: 205,000 km, power: 207 kW (281.44 HP), first registration: 08/2018, overall weight: 14,000 kg, fuel type: diesel, color: white, axle configuration: 2 axles, operation weight: 14,000 kg, maximum load weight: 7,100 kg, empty load weight: 6,900 kg, tire size: 285/70 R 19,5, fuel: diesel, wheelbase: 5,175 mm, brakes: engine braking, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: steel-air, loading space width: 2,450 mm, loading space length: 7,200 mm, loading space height: 2,400 mm, Year of construction: 2018, Equipment: ABS, air conditioning, cruise control, spoiler, tail-lift, IVECO ML 140E28 P COMPLETE WITH FRAME AND 15 Q.LI HINGED TAIL LIFT VERY GOOD MECHANICS AND BODYWORK Djlinvjvx T Nksq Rekl

Condition: used, mileage: 125,000 km, power: 357 kW (485.38 HP), first registration: 03/2024, overall weight: 18,000 kg, fuel type: diesel, color: white, axle configuration: 2 axles, brakes: retarder, gearing type: automatic, emission class: euro6, Equipment: ABS, air conditioning, navigation system, parking heater, Iveco S-Way AS440S49T/P * !!! RENTAL !!! * German vehicle * Leaf / air suspension * Wheelbase 3,800 mm * EURO 6E * Automatic transmission * Retarder * Double tank system 640 l + 480 l * Leather steering wheel * Full LED * Automatic lights * Automatic climate control * Auxiliary heating * On-board computer * Axle load indicator * Navigation * Hill start assist * Lane departure warning * Multifunction steering wheel Dslinjvvf Tvsvq Rokl * Electric windows * Electric adjustable and heated exterior mirrors * 2 beds * Refrigerator * Preparation for auxiliary drive * Central locking with radio * Driver's seat with air suspension * Seat heating for driver's seat Prior sale and errors are expressly reserved! Sale exclusively under our terms and conditions Important note? Important information: Despite careful checking of all details in our offer, errors may creep in. These are sometimes caused by transmission errors in the systems of the various platform providers. We would therefore like to point out that all information is provided without guarantee and does not represent a legal claim. Legal: This sales advertisement does not constitute an offer within the meaning of Section 145 of the German Civil Code (BGB). Rather, it is information for the initiation of a contract. The information provided here is without guarantee and therefore does not represent any guaranteed properties.

Condition: used, Thread rolling machine, cold rolling machine, thread rolling machine, profile rolling machine Manufacturer PEE-WEE Type P 24 Q serial no. LC2403099 year of construction 2004 Rolling force max. 24 ton. Tool diameter max. 200 mm Rolling spindle diameter 69,85 mm Tool bore diameter 70 mm (nominal diameter) Tool length, tool length max. 180 mm Workpiece diameter max. 50 mm Rolling spindle speed 22 - 44 - 95 - 190 rpm Motor power hydraulics approx. 3 kW Motor power roller drive 5.5 kW Mains connection 400 Volt, 50 Hz Djlinjh A S Htjvq Rskl - Swivel roller spindle for threaded continuous rollers - Rolling spindle speed in 4 stages via gear changeover - Hydraulic system integrated in the machine bed Space requirement L x W x H 2000 x 1750 x 2550 mm Weight approx. 3 tons good condition Grooving rollers: The thread rolling tools with the same pitch as the workpiece form the thread by penetrating into the workpiece up to the nominal diameter. The thread length is maximum as long as the rolling tools are wide. Continuous rolling: When the thread length is greater than the rolling tool width. Through-feed tools have 3 sections - the infeed, the calibration section and the outfeed. Grooved rollers have no pitch and are swiveled with the pitch angle of the profile to be rolled. Pitch rollers differ from grooved rollers in that they have a pitch in the profile. The sum of the pitch angle and the swivel angle gives the pitch angle in the workpiece.

Condition: defective spare-parts repository (used), Year of construction: 1984, x-travel 800 mm y-travel 450 mm z-travel 500 mm control Heidenhain TNC 135 total power requirement 5,5 kW weight of the machine ca. 5 t dimensions of the machine ca. 3 x 3 x 3 m No. 2587 Universal tool milling machine MAHO MH 800 P Working area: 800 x 450 x 500 Drive: 5,5 Control: Heidenhain TNC 135 Univ. built-in rotary table Dslinvqjuzmrzs Rekl Tool holder SK 40 Quill stroke 80 mm Speed range 40 - 2000 rpm Space requirement approx. 3 x 4 m, Weight approx. 4400 kg Special price as hobbyist machine / spare parts carrier from stock liquidation: 5.800,-- EUR EXW free loaded truck

Condition: used, mileage: 561,542 km, power: 338 kW (459.55 HP), color: blue, brakes: retarder, gearing type: automatic, Year of construction: 2020, Equipment: ABS, air conditioning, cruise control, navigation system, = More options and accessories = - 12-volt socket - Electric windows Dslinsuufl Ssvq Rskl - Remote central locking - Speed limiter - Refrigerator - Centre armrest - Radio with MP3 support - Sunshade - Parking air conditioning = More information = Number of doors: 2 Fuel type: Natural gas

Condition: new, Year of construction: 2025, laser wavelength: 1,064 nm, Equipment: cooling unit, P class = processing area X 1250 mm x Y 1250 mm x Z 100 mm High-precision linear motor axis system with 6 KW laser power (* Prices depending on equipment and laser power, this is a brand new laser machine from our production) Dkolinok Ran Eovq Rel Simple and highly precise laser processing - laser cutting at high speed and quality

Condition: good (used), Functionality: fully functional, mileage: 320,000 km, power: 205.94 kW (280.00 HP), first registration: 08/2016, overall weight: 18,000 kg, fuel type: diesel, color: white, axle configuration: 2 axles, operation weight: 18,000 kg, maximum load weight: 8,000 kg, empty load weight: 10,000 kg, fuel: diesel, brakes: engine braking, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: steel-air, loading space width: 2,450 mm, loading space length: 8,200 mm, loading space height: 2,400 mm, Year of construction: 2016, Equipment: ABS, air conditioning, cruise control, spoiler, tail-lift, IVECO ML 180E28 P COMPLETE WITH 8.20 VAN AND RETRACTABLE TAIL LIFT Dkjlinvqevx Tzts Rjl

Condition: used, mileage: 113,000 km, power: 169 kW (229.78 HP), gearing type: mechanical, fuel type: diesel, color: silver, overall weight: 8,600 kg, axle configuration: 2 axles, first registration: 06/2003, Year of construction: 2003, loading space length: 4,900 mm, loading space width: 2,400 mm, loading space height: 600 mm, Equipment: ABS, air conditioning, crane, MERCEDES ATEGO 823 Tipper 4,90 m + CRANE / 4x2 Imported / Accident-FREE IN GOOD CONDITION! ? YEAR OF PRODUCTION: 2003 ? MILAGE: 113 000 km Dkelinvjrxp Hqeq Rjl EQUIPMENT: ? ABS ? C. LOCKING ? EL. WINDOWS ? POWER STEERING ? TACHOGRAPH CAPACITY: 3 500 kg TOTAL WEIGHT: 8 600 kg TIPPER: 490 x 240 x 60 cm WHEELBASE: 420 cm TIRE SIZE: 235/75R17,5 SUSPENSION: FRONT: SPRING BACK: AIR CRANE: PM 5024 P TEL: KUBA - POLSKI, ENGLISH, DEUTSCH, ITALIANO SEBASTIAN - POLSKI, DEUTSCH, ITALIANO, ????? LASZLO - MAGYAR COSTEL - ROMÂN? (Romana facem toate formalitatile pt export inclusiv nr)

Condition: used, Hydr. differential stroke press, toggle lever hydraulic press, automatic punching press BRUDERER - LEINHAAS type AR 11-100.H Fine blanking press, knuckle-joint press Machine. No. P247 Year of construction 1991 Pressing force 100 ton (1000 kN) Installation height max. 380 mm Table surface 1100 x 700 mm Outlet hole 800 x 220 mm ram surface 690 x 315 mm Dolinvsgp T Euoq Rokl Frame width 1150 mm Lateral upright width 410 mm Stroke rate 45 and 80 strokes/min. Clamping pin bore Ø 50 mm Compressed air requirement 8-10 bar Hydraulic tank capacity approx. 700 liters Motor power main drive 22 kW Mains connection 400 Volt, 50 Hz, 28 kW - 2 speed settings for the number of strokes (45 and 80 strokes/min.) - electronic cam controller BALLUFF, type Minicontroller BMC4K - electronic tool monitoring EBERLE, type PLS 509S - KISTLER press force monitoring system - table surface with 22 mm T-slots and ram surface with 14 mm T-slots - Electronic stroke counter - motorized height adjustment for the ram - central oil lubrication - Work area shielding through pneumatic opening protective screen - adjacent control cabinet and electrical cabinet - 2 oil coolers with FLUTEC cooling fan (oil-air cooling) - Electrical circuit diagram and printout of PLC program available - Two-hand operation on the machine Space requirement (control cabinet) L x W x H 700 x 700 x 2100 mm ( approx. Space requirement (electrical cabinet) L x W x H 1700 x 650 x 2100 mm Space requirement (press) L x W x H 2350 x 1700 x 3300 mm Weight of the press 8500 kg Very good condition

Condition: used, Year of construction: 1980, inner taper of milling spindel Spannzangenaufnahme collet diameter unbekannt turning speed range 1,3 x der Antriebsdrehzah U/min Dslinvounuwkeq Rskl 165 mm distance spindle - column ? mm weight of the machine ca. 28 kg dimensions of the machine ca. 350*350*200 mm Shipping weight 35 kg Packing ( ca. 400*400*400 ) mm No. 5532 1 used Milling head BoKö / BOHNER & KÖHLE, type UFK 14 P Inner taper of the milling spindle: Collet holder Collet diameter: unknown Speed range: 1.3 x the drive speed Bolt circle 165 mm Weight approx. 35 kg Size approx. 35 x 35 x 20 cm Shipping weight approx. 35 kg Shipping dimensions approx. 40 x 40 x 40 cm

Condition: new, Year of construction: 2025, PFEIFER technology skyCUBE P class 1250 x 1250mm - 200W CO2 laser The flatbed laser center (* Prices depending on equipment, this is a brand new laser machine from our production) The multifunctional flatbed laser center skyCUBE, produced by PFEIFER technology in Saxony/Germany, was developed for your professional cutting tasks and classic laser engravings. It combines high productivity with economy and precision. Your purchase will therefore pay for itself after a short time. The machine housing, made of welded and screwed steel construction, is designed for industrial and commercial use. The drive system developed by PFEIFER technology ensures precision and high repeat accuracy. skyCUBE laser devices meet all requirements of class 1 according to DIN EN 60825-1 and thus offer you the highest level of safety. The ergonomic design with a pull-out work table makes it easier to load the system. A drawer in the lower part of the machine is used to collect the clippings. Simple, user-friendly and intuitive - the skyCUBE PC software makes planning, executing and controlling your production tasks child's play. The processing of your project data takes place via levels (colors), whereby the order and processing type can be specified separately for each level. The determined parameters can be permanently stored and retrieved in a material database. The laser programs are transferred to the machine control with a computer connected via a LAN/USB interface. A modern touch control panel gives you access to all system information and functions. Laser processing center skyCUBE at a glance: German industry standard Machine steel construction for safe and vibration-free accommodation of the laser components and axis systems, on rollable industrial leveling feet 8" touchscreen display simply see more, control more, communicate more with the skyCUBE laser processing center Redundant safety system - Class 1 laser Safety: Shutter --ᐳ active mechanical beam path shutter pull-out work table drawer integrated access and observation hatch pull-out clippings drawer Air-washed optics - filtered air supply to all laser components to protect the optics program-controlled process gas control Drive system developed by PFEIFER technology for precision and high repeatability PFEIFER technology mirrors and optics for perfect results with laser engraving and cutting CO2 laser IRADION®, SYNRAD®, laser sources for perfect laser beam quality and quality over a long period of time tested and stable brand power supplies according to the laser source illuminated machine interior Easy-to-learn operation even without advanced CAD knowledge Safety: BG certified emergency stop / door and safety monitoring Security: Key switch to prevent unauthorized use of the system central vacuum engraving cut fume extraction port Multifunctional cutting table with low-reflection, removable support elements for laser material processing Delinvscwpkpsq Rjkl Optionally available: Laser source and optical system according to application specifications PFEIFER technology linear motor for X/Y axis

Condition: used, mileage: 392,000 km, power: 294 kW (399.73 HP), overall weight: 32,000 kg, fuel type: diesel, color: red, axle configuration: > 3 axles, gearing type: mechanical, loading space width: 2,450 mm, loading space length: 6,800 mm, loading space height: 700 mm, Year of construction: 2014, first registration: 12/2014, Equipment: ABS, air conditioning, crane, Scania P 400 / 8x4 TIPPER 6,80 m + CRANE + REMOTE CONTROL Accident-FREE IN GOOD CONDITION! ? YEAR OF PRODUCTION: 2014 ? MILAGE: 392 000 km EQUIPMENT: ? ABS ? EL. WINDOWS ? POWER STEARING Djljvk Ahyeinvq Rokl ?POWER STEERING ? TACHOGRAPH CAPACITY: 15 000 kg TOTAL WEIGHT: 32 000kg WHEELBASE: 195/300/135 cm TIRE SIZE: 13R22,5 SUSPENSION: SPRING CRANE: PALFINGER PK 33002 - EH D + REMOTE CONTROL TEL: * KUBA - POLSKI, ENGLISH, DEUTSCH, ITALIANO * SEBASTIAN - POLSKI, DEUTSCH, ITALIANO, ????? * LASZLO - MAGYAR * COSTEL - ROMÂN? (Romana facem toate formalitatile pt export inclusiv nr) Ref. nr: 80001

Condition: used, Feeding technology / Feeding system / Vibratory feeder / Sorting device / Spiral feeder Vibratory bowl feeder, sorting device / screw feeder with vibratory feeder for screwdriving technology Feeding system DEPRAG Type: 0611-P/0,75-1S No.: 1183885 2011 - 2012 The system was used to feed electrical plug contact pins. Product dimensions: Ø 4 mm, length 39 mm The pins are pre-stored in the material hopper, the feed belt conveys the pins into the bowl feeder as required. From the bowl feeder, the product is fed to the product turner via the linear feeder. Djlinjkpwuusvq Rokl The product turner turns the product into the correct position and releases it for further processing. The unit comes from a prototype system, the external electrical control is not available and should be carried out by a PLC. Without conversion, suitable, for example, for the automatic and correctly positioned feeding of threaded pins up to M4 x 40. Unit consists of the following components: 1 piece DEPRAG belt hopper / feed conveyor Type: B 10 Serial no.: 1178201 Order no.: 415050A Year of manufacture: 2011 Filling volume: 10 liters Belt speed: 100 mm/min. Operating voltage: 24 Volt (DC) - Nubbed belt surface - Folding stainless steel chute Weight 11 kg 1 piece Spiral conveyor vibrating bowl KENDRION Type: OA C006.504101 / OA C006029 / KQF 465 B5 Bowl diameter top: 200 mm Pot diameter bottom: 100 mm Inner pot height: approx. 75 mm Sorting track width: approx. 5 to 8 mm Operating voltage: 230 Volt, 50 Hz. 1 DEPRAG vibrator controller for the bowl feeder Type: SZG Controller 6 Serial no.: 35-006-000393 1 piece KENDRION linear feeder Type: WS3B/36 Part no.: WSB003,564025 Operating voltage: 230 Volt, 50 Hz. 1 piece DEPRAG vibrator controller for the linear feeder Type: SZG Controller 6 Part no.: 35-007-000216 1 piece FESTO product turner with 180° swivel range - 1 piece FESTO valve block CPV10-VI 18200 - Compressed air requirement approx. 6 bar - 1 MURR basic module type MVP12 - Complete unit mounted on a steel plate with 4 feet Space requirement L x W x H: 1150 x 520 x 860 mm Weight: 100 kg Very good condition

Condition: used, mileage: 518,000 km, power: 279 kW (379.33 HP), gearing type: mechanical, fuel type: diesel, color: red, overall weight: 34,000 kg, axle configuration: > 3 axles, first registration: 05/2008, Year of construction: 2008, loading space length: 6,100 mm, loading space width: 2,350 mm, loading space height: 850 mm, Equipment: ABS, air conditioning, Scania P 380 / 8x4 TIPPER 6,10 m + BORDMATIC Accident-FREE IN GOOD CONDITION! ? YEAR OF PRODUCTION: 2008 ? MILAGE: 518 000 km Dsliont U Imenvq Rokl EQUIPMENT: ? ABS ? EL. WINDOWS ? POWER STEARING ?POWER STEERING ? TACHOGRAPH CAPACITY: 20 000 kg TOTAL WEIGHT: 34 000kg WHEELBASE: 195/235/135 cm TIRE SIZE: 13R22,5 SUSPENSION: SPRING VIN: VLUP8X40009131487 TEL: * KUBA - POLSKI, ENGLISH, DEUTSCH, ITALIANO * SEBASTIAN - POLSKI, DEUTSCH, ITALIANO, ????? * LASZLO - MAGYAR * COSTEL - ROMÂN? (Romana facem toate formalitatile pt export inclusiv nr)

Condition: used, mileage: 277,000 km, power: 265 kW (360.30 HP), overall weight: 26,000 kg, fuel type: diesel, color: white, axle configuration: 3 axles, gearing type: mechanical, loading space width: 2,350 mm, loading space length: 4,700 mm, loading space height: 850 mm, Year of construction: 2012, first registration: 05/2012, Equipment: ABS, air conditioning, crane, Scania P 360 / 6x4 TIPPER 4,70 m + BORDMATIC + CRANE + REMOTE CONTROL Accident-FREE IN GOOD CONDITION! Delinvqevdh Nco Rekl ? YEAR OF PRODUCTION: 2012 ? MILAGE: 277 000 km EQUIPMENT: ? ABS ? EL. WINDOWS ? POWER STEARING ?POWER STEERING ? TACHOGRAPH CAPACITY: 11 000 kg TOTAL WEIGHT: 26 000kg WHEELBASE: 390/135 cm TIRE SIZE: 13R22,5 SUSPENSION: SPRING CRANE: PALFINGER PK 13001 - KA + REMOTE CONTROL TEL: * KUBA - POLSKI, ENGLISH, DEUTSCH, ITALIANO * SEBASTIAN - POLSKI, DEUTSCH, ITALIANO, ????? * LASZLO - MAGYAR * COSTEL - ROMÂN? (Romana facem toate formalitatile pt export inclusiv nr) Ref. nr: 57690