Used Ciata P-115 Hb for sale (9,868)

Condition: used, mileage: 56,177 km, power: 100 kW (135.96 HP), fuel type: diesel, gearing type: mechanical, overall weight: 3,500 kg, first registration: 05/2021, color: white, Total allowable weight: 3500kg Dslink Aotcvi Se Ejut

Year of construction: 1998, Condition: like new (used), Functionality: fully functional, SERAP CRUST FLOW P ID.NO. 2797 Dolsumbyieink A Eout Serap Crust flow P tunnel which allows complete crust freezing of delicate and soft foods, etc. such as extruded biscuits, pasta, mousses, ready meals, ice cream etc. Also suitable for freezing meat products before slicing.Dimensions 320 x 120 cm H 165 cm Bandwidth 40 cm

Year of construction: 2008, Condition: refurbished (used), Top condition Pee-Wee thread rolling machine from a trade-in. The machine was disassembled and mechanically and electrically overhauled. New SIEMENS SPS and new electric. 30t forming force Dslsd Nq Tcsink A Eeut

Condition: excellent (used), Corner jointing machine Pressta Esiele PV10 shipping EU ~300euro Duelinkel Skl Is A Eot

Condition: used, hot runner control device Vetter MC 712 L-P 12 fach 220 Volt price: 2.850 € Dslink Ajkt Uzko Eout contact: Mr. Rainer Eckerle

Condition: used, Feeding technology / Feeding system / Vibratory feeder / Sorting device / Spiral feeder Vibratory bowl feeder, sorting device / screw feeder with vibratory feeder for screwdriving technology Dujlinjh Ap Idsk A Ejt Feeding system DEPRAG Type: 0622-P/0,75-1S No.: 1183884 2011 - 2012 The system was used to feed electrical plug contact pins. Product dimensions: Ø 4 mm, length 26 mm The pins are pre-stored in the material hopper, the feed belt conveys the pins into the bowl feeder as required. From the spiral conveyor with two sorting tracks, the pins are fed to the product turner. The product turner turns the product into the correct position and releases it for further processing. The unit comes from a prototype system, the external electrical control is not available and should be carried out by a PLC. Without conversion, suitable, for example, for the automatic and correctly positioned feeding of threaded pins up to M4 x 26. Unit consists of the following components: 1 piece DEPRAG belt hopper / feed conveyor Type: B 10 Serial no.: 1178200 Order no.: 415050A Year of manufacture: 2011 Filling volume: 10 liters Belt speed: 100 mm/min. Operating voltage: 24 Volt (DC) - Nubbed belt surface - Folding stainless steel chute Weight 11 kg 1 piece Spiral conveyor vibrating bowl KENDRION Type: OA C006.504101 / OA C006029 / KQF 465 B5 Bowl diameter top: 200 mm Pot diameter bottom: 100 mm Inner pot height: approx. 75 mm Sorting track width: approx. 5 to 8 mm - Vibrating bowl with two sorting tracks and two product outlets Operating voltage: 230 Volt, 50 Hz. 1 DEPRAG vibrator controller for the bowl feeder Type: SZG Controller 6 Serial no.: 35-006-000391 2 pieces FESTO product turner with 180° swivel range - 1 FESTO valve block CPV10-GE-MP-8 - 1 FESTO valve block CPV10-VI - Special pneumatic components (compressed air requirement approx. 6 bar) - 2 MURR basic modules type MVP12 - Complete unit mounted on a steel plate with 4 feet Space requirement L x W x H: 1150 x 520 x 860 mm Weight: 100 kg very good condition

Condition: used, mileage: 324,845 km, power: 152 kW (206.66 HP), fuel type: diesel, gearing type: mechanical, overall weight: 11,500 kg, first registration: 08/2014, color: white, Total allowable weight: 11500kg Dolijuqzy Ronk A Eeut

Condition: used, mileage: 286,751 km, power: 235 kW (319.51 HP), first registration: 09/2010, overall weight: 18,000 kg, fuel type: diesel, color: white, axle configuration: 4x2, maximum load weight: 8,200 kg, empty load weight: 9,800 kg, tire size: 315/80 R22,5, next inspection (TÜV): 09/2025, wheelbase: 4,900 mm, driver cabin: day cab, gearing type: mechanical, suspension: air, loading space volume: 40 m³, loading space width: 2,480 mm, loading space length: 6,500 mm, loading space height: 2,500 mm, Year of construction: 2010, number of seats: 2, Equipment: ABS, air conditioning, differential lock, hydraulics, Color White Ivory, empty weight: 9800kg, permissible total weight: 18000kg, loading space (L W H): 6,500 mm x 2,480 mm x 2,500 mm, tire size: 315/80 R22.5, loading space volume: 40 m³, 1st axle: , 2nd axle: , air suspension, electronic braking system EBS, medium seats, H4 headlights, radio, adjustable steering column, roof hatch, fog lights, curb mirror, wide-angle mirror, immobilizer, axle load display, CG 16 driver's cab 2 rotating beacons roof spoiler special case with hydraulic side flaps L6500 W2480 H2500 cable winch BÄR 1500 kg tail lift XLEP4X20005240197, Non-binding offer, errors and prior sale reserved. Image does not have to correspond to the offer. Dujlinksu T U Ncs A Ejt

Condition: used, Year of construction: 1994, weight 450 kg Djlinkjvwft Ee A Eout Dimensions (L,W) 1100x1100x1200 mm with stop system r - lwith pneum. drill feed and chipping devicewith multi-spindle drill head with 8 drill spindlesused, top condition, top equipment, many accessoriesmake Hoffmanntype HR 150 Pyear of construction 1994machine no. 16002work piece support right left swivelingdrill holder shank chuckadapter plate for drill head holderdowel drilling device rasterwork piece stopcenter stop2 pcs. stop ruler 2100 mm with folding stops pcs. 4 - r leftpneumatic strokedigital displaysautomatic feedworkpiece clamp pneumatic 2new price approx. 18.000,00 €suction connection D 80 mmspace requirement approx. 1100 mm x 1100 mm x 1200 mmweight approx. 450 kgstorage place 97447 Gerolzhofen, free loaded, unpackeddelivery in as-is condition as viewed,without guarantee and warranty

Year of construction: 2022, Condition: new, machine/vehicle number: AN2301155, Atlas Copco P3500i power generator The Atlas Copco P3500i iP mobile power generator is a lightweight, efficient and reliable source of mobile power. Thanks to its high fuel efficiency and compact dimensions, the power generator is versatile for daily use, for frequent single jobs, typically for power tools as an inverter power generator or as an emergency generator. With good sound insulation, the emergency generator is very quiet and hardly louder than an electric razor. The emergency generator is equipped with a large fuel tank and therefore runs up to six hours before it needs to be refueled. Despite the large fuel tank, the emergency generator is compact and light enough to be transported across construction sites or stowed away to save space. The intelligent, variable speed control, together with the option of parallel operation, results in an efficient power supply with minimal fuel consumption, as the engine speed is adapted to the current load conditions. Key product features: Atlas Copco P 3500 i inverter power generator Pull starter Large fuel tank Engine oil level monitor Overheating protection Silenced hood, CE compliant noise level, quiet Power sockets Electric key start (12V) Inverter technology, stable voltage and frequency Instrumentation, voltmeter, hour meter Circuit breaker Wheels Engine alarm: low oil level, overload Intelligent speed control for fuel efficiency Connections for parallel operation (parallel operation kit with cables optionally available) Voltage 230V / 50Hz Peak power 3.3 Rated power 3.0 Tank capacity (l) 10.0 Starter type electric / cable Weight 45.0 Fuel Gasoline Max. Sound pressure level (LPA) at 7 m 63.0 Sound power level (LwA) 88.0 Sockets 2x Schuko 2P+G 16A | 2x Nema 240/120V Twist Lock Duslinkel R Hz Se A Eot

Condition: new, Year of construction: 2024, punching force: 115 t, power: 11 kW (14.96 HP), PLACE OF PRODUCTION : TURKEY Dujlinevfynmok A Est WARRANTY PERIOD : 12 MONTHS DELIVERY DATE : YOUR QUESTION DELIVERY METHOD : EXW BURSA/TURKEY STANDARD FEATURES : - 12 separate hydraulic pistons and 2 separate foot controls for two people to work at the same time - 2Adjustable piston stroke distance for faster work - 3Central lubrication system - 4Backrest with electric switch - 5Working lamp - 65 separate workstations on the same body: 6.1 - Ø26 mm punch and matrix and standard drilling tools 6.2 - Full round and full square material cutting knife set 6.3 - Angle cutting knife set 6.4 - Blade and sheet metal cutting knives 6.5 - U-notching knife set TECHNICAL SPECIFICATIONS : Drilling force115 t Extension355 mm Stroke80 mm Strokes per min. (with 20 mm stroke)25Sheet thickness (max.))Ø 34 x 26 mm Working height935 mm Cutting capacity600 x 15 mm380 x 25 mm Steel angle 45° (1 foot)80 x 80 x 10 mmSteel angle 90°150 x 150 x 150 x 16 mm Blade length610 mmRound55 mmSquare50 mm Material thickness13 mm Width2,040 mmDepth950 mm Engine power11.0 Kw Mains voltage400 V50 Hz Height2,180 mm Weight2,920 kg

Condition: repair required (used), turning diameter over bed 400 mm turning diameter over slide rest - mm turning length 1000 mm total power requirement 9 kW weight of the machine ca. 2 t dimensions of the machine ca. 2,5*1,2*1,6 m Machine has been partially overhauled Among other things engine renewed ( 8.000 EUR ) Dolisu Tkqijnk A Eeut The repair was not completed due to plant closure

Condition: used, mileage: 441,731 km, power: 338 kW (459.55 HP), first registration: 02/2018, overall weight: 18,000 kg, fuel type: diesel, color: yellow, gearing type: mechanical, Total allowable weight: 18000kg Duolinjvnxqrsk A Eot

Condition: used, mileage: 523,500 km, power: 353 kW (479.95 HP), first registration: 02/2016, overall weight: 18,000 kg, fuel type: diesel, color: white, emission class: euro6, For information Duelinjviki Aok A Eot

Condition: used, Weight 190 kg Dujlinevwggyok A Eot 600 kg

Year of construction: 2022, Condition: new, machine/vehicle number: AN2301155, Atlas Copco P2500i power generator The Atlas Copco P2500i iP mobile power generator is a lightweight, efficient and reliable source of mobile power. Thanks to its high fuel efficiency and compact dimensions, the power generator is versatile for daily use, for frequent single jobs, typically for power tools as an inverter power generator or as an emergency generator. With good sound insulation, the emergency generator is very quiet and hardly louder than an electric razor. The emergency generator is equipped with a large fuel tank and therefore runs up to six hours before it needs to be refueled. Despite the large fuel tank, the emergency generator is compact and light enough to be transported across construction sites or stowed away to save space. The intelligent, variable speed control, together with the option of parallel operation, results in an efficient power supply with minimal fuel consumption, as the engine speed is adapted to the current load conditions. Key product features: Atlas Copco P 2500 i inverter power generator Pull starter Large fuel tank Engine oil level monitor Overheating protection Silenced hood CE compliant noise level, quiet Power sockets Inverter technology, stable voltage and frequency Engine alarm: low oil level, overload Speed control for fuel efficiency Delink Aol R Hy Ao Esut Connections and cables for parallel operation Voltage 230V / 50Hz Peak power 2.5 Rated power 2.3 Tank capacity (l) 4.0 Starter type pull starter Weight 27.0 Fuel Gasoline Max. Sound pressure level (LPA) at 7 m 63.0 Sound power level (LwA) 88.0 Sockets 2x Schuko 2P+G 16A | 2x Nema 120V 20A | 1x Nema 120V Twist Lock

Condition: used, Electric hoist, crane, electric wire rope hoist, wire rope winch DEMAG type P 10 Serial no. 941 477 Year of construction 1962 Lifting capacity 2000 kg with 4 ropes Lifting height 5 meters Lifting speed 6 m/min. Fine lifting speed 1.3 m/min. Reeving 4/1 Motor power 0.6 / 2.6 kW Mains connection 380 Volt, 50 Hz - DEMAG hoist, type 19/11 K28P Djljr E Ht Hoink A Eeut - Electric trolley DEMAG, type 13 / 6 K8 - 1 Travel speed approx. 19 m/min - Trolley for double T-beams, beam width 120 to 180 mm - Load hook for 4 load lines - Operating cylinder for the hoist with approx. 2.5 meter cable length Space requirement L x W x H 1400 x 900 x 500 mm Weight 350 kg Good condition

Condition: used, mileage: 406,238 km, power: 338 kW (459.55 HP), color: blue, brakes: retarder, gearing type: automatic, Year of construction: 2020, Equipment: ABS, air conditioning, cruise control, navigation system, = More options and accessories = - 12-volt socket - Electric windows - Remote central locking - Speed limiter - Refrigerator Duelsuufl Ejink A Eet - Centre armrest - Radio with MP3 support - Sunshade - Parking air conditioning = More information = Number of doors: 2 Fuel type: Natural gas

Condition: used, mileage: 705,940 km, power: 353 kW (479.95 HP), first registration: 12/2016, fuel type: diesel, color: white, gearing type: automatic, emission class: euro6, For information Duolioviki Nenk A Eot

Condition: used, Thread rolling machine, cold rolling machine, thread rolling machine, profile rolling machine Manufacturer PEE-WEE Type P 24 Q serial no. LC2403099 year of construction 2004 Rolling force max. 24 ton. Tool diameter max. 200 mm Rolling spindle diameter 69,85 mm Tool bore diameter 70 mm (nominal diameter) Tool length, tool length max. 180 mm Workpiece diameter max. 50 mm Rolling spindle speed 22 - 44 - 95 - 190 rpm Motor power hydraulics approx. 3 kW Motor power roller drive 5.5 kW Mains connection 400 Volt, 50 Hz - Swivel roller spindle for threaded continuous rollers - Rolling spindle speed in 4 stages via gear changeover - Hydraulic system integrated in the machine bed Space requirement L x W x H 2000 x 1750 x 2550 mm Weight approx. 3 tons good condition Grooving rollers: The thread rolling tools with the same pitch as the workpiece Dujlinksh A S Hts A Eot form the thread by penetrating into the workpiece up to the nominal diameter. The thread length is maximum as long as the rolling tools are wide. Continuous rolling: When the thread length is greater than the rolling tool width. Through-feed tools have 3 sections - the infeed, the calibration section and the outfeed. Grooved rollers have no pitch and are swiveled with the pitch angle of the profile to be rolled. Pitch rollers differ from grooved rollers in that they have a pitch in the profile. The sum of the pitch angle and the swivel angle gives the pitch angle in the workpiece.

Condition: used, mileage: 576,230 km, power: 338 kW (459.55 HP), color: blue, brakes: retarder, gearing type: automatic, Year of construction: 2020, Equipment: ABS, air conditioning, cruise control, navigation system, = More options and accessories = - 12-volt socket - Electric windows - Remote central locking - Speed limiter - Refrigerator - Centre armrest - Radio with MP3 support Dusljuufgceink A Est - Sunshade - Parking air conditioning = More information = Number of doors: 2 Fuel type: Natural gas

Condition: used, mileage: 800,300 km, power: 353 kW (479.95 HP), first registration: 12/2016, overall weight: 18,000 kg, fuel type: diesel, color: white, emission class: euro6, For information Dslijvikc Ajnk A Eout

Condition: used, Hydr. differential stroke press, toggle lever hydraulic press, automatic punching press BRUDERER - LEINHAAS type AR 11-100.H Fine blanking press, knuckle-joint press Machine. No. P247 Year of construction 1991 Pressing force 100 ton (1000 kN) Installation height max. 380 mm Table surface 1100 x 700 mm Outlet hole 800 x 220 mm ram surface 690 x 315 mm Frame width 1150 mm Lateral upright width 410 mm Stroke rate 45 and 80 strokes/min. Clamping pin bore Ø 50 mm Compressed air requirement 8-10 bar Hydraulic tank capacity approx. 700 liters Motor power main drive 22 kW Mains connection 400 Volt, 50 Hz, 28 kW - 2 speed settings for the number of strokes (45 and 80 strokes/min.) - electronic cam controller BALLUFF, type Minicontroller BMC4K - electronic tool monitoring EBERLE, type PLS 509S - KISTLER press force monitoring system - table surface with 22 mm T-slots and ram surface with 14 mm T-slots - Electronic stroke counter - motorized height adjustment for the ram - central oil lubrication Dslinogp T Euok A Eeut - Work area shielding through pneumatic opening protective screen - adjacent control cabinet and electrical cabinet - 2 oil coolers with FLUTEC cooling fan (oil-air cooling) - Electrical circuit diagram and printout of PLC program available - Two-hand operation on the machine Space requirement (control cabinet) L x W x H 700 x 700 x 2100 mm ( approx. Space requirement (electrical cabinet) L x W x H 1700 x 650 x 2100 mm Space requirement (press) L x W x H 2350 x 1700 x 3300 mm Weight of the press 8500 kg Very good condition

Condition: used, Horiz. Mitre bandsaw KNUTH with minimum quantity lubrication type HB 250A Bandsaw for metalworking with swivel saw frame. Serial no. 201603004 Year of manufacture 2016 Sawing range at 90° round Ø 225 mm Sawing range for 90° square 190 x 190 mm Sawing range for 90° rectangle 245 x 150 mm Sawing area at 45° round Ø 145 mm Sawing area for 45° square 145 x 145 mm Sawing area for 45° rectangle 200 x 145 mm Sawing area at 60° round 90 mm Sawing area at 60° square 90 x 90 mm Sawing area for 60° rectangle 110 x 70 mm Saw band 2480 x 27 x 0.9 mm Roller diameter 290 mm Belt speed 45 / 90 m/min. Compressed air requirement approx. 5 bar (minimum quantity lubrication) Working height 910 mm Motor power 1.1 kW Connected load 400 Volt, 50 Hz - Saw blade speed via 2-stage electric motor - Infinitely variable lowering via hydraulic lowering cylinder - Automatic limit stop after material average - Infinitely variable swivel saw arm for mitre cuts up to 60° Dolink Ajrvm Npj Eeut - Pressure gauge for band tension - Vice with short-stroke quick clamping device - Coolant device with electric pump - Minimum quantity lubrication UNI-Microspray I (year of manufacture 2017) - Workpiece stop Space requirement L x W x H 1450 x 700 x 1450 mm Weight 185 kg Very good condition

Condition: used, Feeding technology / Feeding system / Vibratory feeder / Sorting device / Spiral feeder Vibratory bowl feeder, sorting device / screw feeder with vibratory feeder for screwdriving technology Feeding system DEPRAG Type: 0611-P/0,75-1S No.: 1183885 2011 - 2012 The system was used to feed electrical plug contact pins. Product dimensions: Ø 4 mm, length 39 mm The pins are pre-stored in the material hopper, the feed belt conveys the pins into the bowl feeder as required. From the bowl feeder, the product is fed to the product turner via the linear feeder. The product turner turns the product into the correct position and releases it for further processing. The unit comes from a prototype system, the external electrical control is not available and should be carried out by a PLC. Without conversion, suitable, for example, for the automatic and correctly positioned feeding of threaded pins up to M4 x 40. Unit consists of the following components: 1 piece DEPRAG belt hopper / feed conveyor Type: B 10 Serial no.: 1178201 Order no.: 415050A Year of manufacture: 2011 Filling volume: 10 liters Belt speed: 100 mm/min. Operating voltage: 24 Volt (DC) - Nubbed belt surface - Folding stainless steel chute Weight 11 kg 1 piece Spiral conveyor vibrating bowl KENDRION Type: OA C006.504101 / OA C006029 / KQF 465 B5 Bowl diameter top: 200 mm Pot diameter bottom: 100 mm Inner pot height: approx. 75 mm Sorting track width: approx. 5 to 8 mm Operating voltage: 230 Volt, 50 Hz. 1 DEPRAG vibrator controller for the bowl feeder Type: SZG Controller 6 Serial no.: 35-006-000393 1 piece KENDRION linear feeder Type: WS3B/36 Part no.: WSB003,564025 Operating voltage: 230 Volt, 50 Hz. Djlijkpwuujnk A Eeut 1 piece DEPRAG vibrator controller for the linear feeder Type: SZG Controller 6 Part no.: 35-007-000216 1 piece FESTO product turner with 180° swivel range - 1 piece FESTO valve block CPV10-VI 18200 - Compressed air requirement approx. 6 bar - 1 MURR basic module type MVP12 - Complete unit mounted on a steel plate with 4 feet Space requirement L x W x H: 1150 x 520 x 860 mm Weight: 100 kg Very good condition