Used Ciata P-115 Hb for sale (9,848)

Condition: used, mileage: 13,152 km, gearing type: other, fuel type: electric, color: red, overall weight: 1,090 kg, empty load weight: 629 kg, maximum load weight: 150 kg, number of seats: 1, first registration: 12/2014, emission class: none, suspension: other, Year of construction: 2014, operating hours: 13,152 h, driver cabin: other, fuel: electricity, Without charger, 24V battery 5 EPZV 500 The used Linde P 60 Z tractor is an industrial transport vehicle that can be used in a variety of ways. The vehicle, which was first registered in December 2014, has a mileage of 13,152 kilometers and just as many operating hours. The Linde tractor runs on electricity and is equipped with a 24V battery of type 5 EPZV 500. Please note that the charger is not included in the scope of delivery. With a permissible total weight of 1,090 kg, the vehicle offers space for one seat. The red color scheme ensures good visibility in industrial environments. This tractor can be viewed on site in Rohrbach (Palatinate), even without prior appointment. Additional services such as a registration service or delivery for an additional charge within Germany are offered. Further information and Djln Usr Uzimjgk Tskl contact options can be found on . Only sold to businesses (agriculture, freelancers, small and large businesses) or export. Subject to errors and prior sale.

Condition: excellent (used), LOADER (BRIDGE-FRAME) WITH DOUBLE PICK-UP STATION Vacuum system (with its pump) No. 2 Vertical supporting columns of the top supporting beam No. 1 Horizontal top supporting beam (where the carriage slide on) No. 1 Motorized sliding carriage with horizontal metal arms No. 2 Out-side rollers way (on gound) to in-feed pile of panels to the Loader Out-side motorized rollers table (which receives panels from the Loader) Separate electric and command panel Perimetral safety metal grids Working capacity (cycles/min) 16 (ca.) Min/Max panels thickness mm 10 / 50 (ca.) Dkeln Uofi Tg Hegk Tsl Min dimensions of the panels mm 250 x 320 (ca.) Max dimensions of the panels mm 1300 x 3000 (ca.) Total installed motor power Kw 30

Condition: used, mileage: 75,483 km, power: 85 kW (115.57 HP), fuel type: diesel, gearing type: mechanical, axle configuration: 4x2, wheelbase: 2,920 mm, first registration: 04/2019, fuel tank capacity: 69 l, emission class: euro6, color: white, number of seats: 2, number of previous owners: 3, Year of construction: 2019, Equipment: ABS, air conditioning, airbag, cruise control, electronic stability program (ESP), immobilizer system, parking sensors, sliding door, = More options and accessories = - Boot lid - Rear parking sensors - Right side sliding door - Automatic dipped beam - Heated exterior mirrors - Passenger airbag - Electric front windows - Electrically adjustable exterior mirrors - Euro 6 - Driver airbag - Remote central locking - Hill-hold control - Height-adjustable driver's seat - Height-adjustable steering wheel - Lumbar supports - Front centre armrest - Multimedia capability - Radio - Rain sensor - Tyre pressure monitoring - Start/stop system - Start interrupter - Telephone with Bluetooth = More information = General information Number of doors: 5 Model range: Apr. 2016 - May 2019 Cab: simple Technical information Torque: 300 Nm Number of cylinders: 4 Engine displacement: 1,560 cc Gearbox: 6 gears, Manual transmission Acceleration (0-100): 12.3 s Top speed: 160 km/h Dimensions Length/height: L1H1 Dimensions (L x W x H): 461 x 192 x 195 cm Weights Curb weight: 1,498 kg Payload: 1,127 kg GVW: 2,625 kg Interior Interior: black Environment CO₂ emissions: 133 g/km Consumption Average fuel consumption: 5.1 l/100km Fuel consumption in urban areas: 5.5 l/100km Fuel consumption outside urban areas: 4.9 l/100km Doleuzyb Asn Ugk Tskl Maintenance, history and condition Booklets: Available APK (technical main inspection): checked until 04.2026 Number of keys: 2 (2 handheld transmitter)

Condition: used, Functionality: fully functional, Year of construction: 2016, operating hours: 2,180 h, load capacity: 1,600 kg, lifting height: 4,625 mm, free lift: 1,519 mm, fuel type: electric, mast type: triplex, construction height: 2,121 mm, fork carriage width: 980 mm, fork length: 1,200 mm, drive type: Elektro, Electric 4-wheel forklift Load center: 500 ISO class: ISO class 2 = 1,000 - 2,500 kg Mast type: Triplex Gearbox: 1-pedal control Condition: Ready for use and fully functional Djlev Ht Shen Ugk Tekl Technical condition: good Front tires type: Superelastic Front tires size: 18x7-8 Front tires condition: 20 - 40% Rear tires type: Superelastic Rear tires size: 16x6-8 Rear tires condition: 20 - 40% Battery voltage: 48V Battery Ah: 625Ah Battery manufacturer: Hawker Battery type: PzS Battery year of manufacture: 2016 Battery condition: 60 - 80% Description: Handed over with new FEM 4.004 test including test book If you have any further questions, please call us We are happy to help. In addition to this model, we have around 150 other industrial trucks in stock. Visit our homepage fleischmann-foerdertechnik Leasing & financing and we will be happy to inquire about delivery at favorable conditions for you. Linde equipment can also be traded in - even without purchasing a device from us. The operating hours shown were read off at the time of entry. Subject to prior sale, changes and errors. Side shift, fork positioner, integrated fork positioner with side shift 3rd valve, 4th valve, rear work light, front work light, roof cover, windscreen, full free lift, safety light, LED,

Condition: ready for operation (used), Year of construction: 1997, machine/vehicle number: 123-2653, A four-sided machine. Djln Usvua Huegk Tskl It is designed for planing rough furniture workpieces

Condition: excellent (used), Year of construction: 2005, Functionality: fully functional, travel distance X-axis: 800 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 800 mm, rapid traverse X-axis: 60 m/min, rapid traverse Y-axis: 60 m/min, rapid traverse Z-axis: 60 m/min, rotational speed (max.): 18,000 rpm, CNC Heidenhain iTNC 530 WORKING AREA: Longitudinal travel X: mm 800 Cross travel Y: mm 800 Vertical travel Z: mm 800 FEED: Feed speed X, Y, Z: mm/min 60.000 Rapid X, Y, Z: m/min 60 SPINDLE: Spindle attachment cone: ISO 40 Spindle rotation speed: rpm 18.000 TABLE: Workpiece holder surface: mm 900 x 700 Max. table load: kg 1.400 TOOL MAGAZINE: Magazine places: places 120 Chip-to-chip time: sec 5 Dsln Ugov Igpisk Tjkl Machine complete with: • Renishaw probe • Tool presetting • High pressure 40bar with filter paper Year of manufacturing: 2005

Condition: excellent (used), Year of construction: 2023, operating hours: 217 h, General information Field of application: Construction Weights Empty weight: 2.200 kg Functional Mast: articulated arm Lifting capacity: 230 kg Working height: 1.780 cm Maintenance, history and condition Number of owners: 1 Technical condition: very good Visual appearance: very good Other information EPA Marked: yes Doln Uov D Egregk Tjkl Max. horizontal reach: 930 m Max swing of arm in degrees: 340 Transport dimensions (LxWxH): 3,75x0,78x1,99 Additional information Please contact Bas Sindorf for more information

Condition: excellent (used), C.N.C. WORKING CENTER with 4 axes (X-Y-Z-C) for routering, boring, cutting and edge banding Numerical Control ICOS OPEN 231. Software IMAWOP Portal Loading and Unloading System No. 2 Working tables (with pods and rails), each one with No. 4 Support rails (tot. 8) DYNAPOINT LED system on the rails for the vacuum pods positioning (Y-axe) and on the basement for rails (X-axe) Automatic Tools Changing System. Tools storage plate (No. 2 x 18 of folds-positions) Max. useful working area (X - Y - Z) mm 5100 x 1400 x 180 Workpieces dimensions (X - Y - Z) 2 x (mm 2350 / 2200 x 1400 x 60) (N°) 2 Working Areas 2 x Vacuum pump (capacity m3/h). Motorized carpet to evacuate chips and wastes Separate electric and command cabinet. WORKING GROUPS (TOP): No. 21 Independent vertical boring spindles (Drilling head motor-power: Kw 4 ca.) No. 1 Vertical electro-spindle (HSK F63) with motor power (Kw) 18. With C axe, 360° No. 1 Edge Banding unit (always ready on board) VT 100. Glueing Unit (Hot Melt glue) Dkoletixqkjn Ugk Tel Edges (tape) thickness in rolls (min/max) mm 0,4 / 3. Edge coils supporting unit (No. 2 reels) No. 2 Pre-End cutting (pre-snipping) Unit OPTIONAL: Circular saw aggregate (diam. mm 200) OPTIONAL: Combined aggregate (Flush-Trimming/Scraping) OPTIONAL: Drilling Aggregate (with 4 horizontal boring spindles)

Condition: ready for operation (used), Year of construction: 1962, Functionality: fully functional, Used Weingarten P 100 screw press Djln Ugsvuqlbsk Tskl Pressing force: 80t Table: 350 x 400 mm Stroke: 80 - 250 mm Stroke rate: 45 min-1 Installation space: 400 mm

Condition: excellent (used), Year of construction: 2021, Functionality: fully functional, machine/vehicle number: MSV 250x250/7 VVM-P-6-80-PO-LML, overall weight: 125 kg, type of input current: AC, temperature: 80 °C, power: 0.05 kW (0.07 HP), space requirement height: 570 mm, space requirement length: 1,822 mm, input voltage: 250 V, space requirement width: 410 mm, frequency: 50 Hz, pressure: 6 bar, Equipment: documentation/manual, Fully Automatic Magnetic Separator for Dry Mixtures: OUR MACHINE HAS NOT BEEN USED BEFORE. IT WAS IMPORTED FROM EUROPE FOR THE PROJECT. IT IS IN ZERO CONDITION SINCE THE PROJECT WAS CANCELLED. IT DOES NOT REQUIRE AN OPERATOR, IT IS FULLY AUTOMATIC. IT COMPLIES WITH EUROPEAN FOOD REGULATIONS! Brand: MAGSYS Model: MSV 250x250/7 VVM-P-6-80-PO-LML Technical Specifications: *Made entirely of stainless steel. Inlet and outlet dimensions are 250x250mm. *NdFeB Natural Neodymium Magnet - upper part consists of 4 and lower part consists of 3 magnetic tubes with a diameter of 30mm. *Magnetic Induction 17,000 Gs Surface 12,000 Gs, 129 N Breaking Force, *The magnets on the device can catch metal dust up to 1 micron. *The maximum operating temperature of the magnets is 80°C. *The magnetic separator is fully automatic. The magnets are self-cleaning. The flow does not stop during cleaning. *Siemens Simatic S7-1200 - Color Touch Panel is used. *Festo brand pneumatic components are used on the system. *Cleaning time, total cleaning number, total service number, air pressure error number can be taken as data on the PLC screen. Dkeln Ugkov S U Ibj Tel

Year of construction: 1989, Condition: good (used), Kasto fully automatic sawing machine type HB 420 AU. Dsln Ugksh Huazo Tjkl Sawing capacity round 420mm Sawing capacity square 420x420mm Maximum clamp opening 480mm Saw blade 6300x41x1.3mm Variable speed 20-130rpm Chip conveyor Engine power 8kW Weight 3360kg Machine in neat good working condition.

Condition: excellent (used), mileage: 494,355 km, power: 353 kW (479.95 HP), fuel type: diesel, color: beige, axle configuration: 6x4, fuel: diesel, brakes: engine braking, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, Year of construction: 2014, Equipment: ABS, air conditioning, cruise control, navigation system, sleeping cabin, soot filter, = More options and accessories = - Aluminium fuel tank - Brake booster - Electric windows - Electrically adjustable exterior mirrors - Low noise - Speed limiter - Refrigerator - LED lights - Air suspension - Air horn - Media system - Particle filter - Sunshade - Stability control - Toolbox - Power take-off (PTO) - Central lubrication - Central locking = More information = Drivetrain AdBlue system: Yes Axle configuration Front axle: Steered Rear axle 1: Dual tires Rear axle 2: Lift axle; Steered Weights Empty weight: 17,080 kg Functional Mast: Telescopic (8 sections) Mast length: 24.8 m Lifting capacity: 9,300 kg Lifting height: 2,480 cm Crane: PALFINGER PK 34002-SH G POWER LINK PLUS, behind the cabin Brand of the body: PALFINGER PK 34002-SH G POWER LINK PLUS CE marking: yes Condition Technical condition: very good Visual condition: very good MAN TGS 28.480 6X4-4 BL SZM + PALFINGER PK 34002-SH G POWER LINK PLUS CRANE + WINCH EURO 6 L PACKAGE 480 HP DRIVE 6X4-4 BL LAST AXLE LIFT AND STEERING WHEELBASE 365 CM AIR SUSPENSION TGS SLEEPING CABIN WITH AIR CONDITIONING REFRIGERATOR AUTOMATIC TRANSMISSION SZM ADJUSTABLE FIFTH SEAT PLATE TOOL BOXES PALFINGER PK 34002-SH G POWER LINK PLUS CRANE OIL COOLER FOR CRANE HYDRAULICS Dkeln Ugeuxznrok Tjl TOTAL 8X HYDRAULICALLY EXTENDABLE MAX WORKING HEIGHT 24.8 METERS!! MAX LIFTING CAPACITY 9300 KG MAX LIFTING CAPACITY OP 21.2 METERS 930 KG TOTAL 4X SUPPORT RADIO CONTROL LARGE HYDRAULIC WINCH CENTRAL LUBRICATION SYSTEM ON THE CRANE FOLLOW OUR INSTAGRAM, FACEBOOK AND TIKTOK TO SEE OUR VIDEOS OF OUR TRUCKS/COMMERCIAL VEHICLES AND MACHINES FOR SALE. WE SPEAK GERMAN WE SPEAK ENGLISH HABLAMOS ESPANOL

Condition: excellent (used), mileage: 787,999 km, power: 368 kW (500.34 HP), first registration: 02/2017, fuel type: diesel, color: white, axle configuration: 4x2, tire size: 315/70/22.5, fuel: diesel, wheelbase: 3,800 mm, brakes: engine braking, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: steel-air, Year of construction: 2017, Equipment: ABS, air conditioning, cruise control, differential lock, navigation system, parking heater, sleeping cabin, traction control, = Other options and accessories = - Alarm system - Aluminium fuel tank - Brake booster - Double fuel tank - Electric windows - Air conditioning - Refrigerator - Fog lights - Radio/CD player - Sunshade - Auxiliary heating - Toolbox - Power take-off (PTO) - Central locking = Remarks = ADR: FL - AT - EX/II -EX/III = More information = General information Purpose: Goods transport Technical information Number of cylinders: 6 Engine displacement: 12,777 cc Curb weight: 8,060 kg Drivetrain AdBlue system: Yes Gearbox Transmission: 12 speeds, automatic Axle configuration Tyre size: 315/70/22.5 Dkslnsv Dlpme Ugk Tel Brakes: Disc brakes Front axle: Max. axle load: 7500 kg; Steered; Tire profile left: 30%; Tire profile right: 30%; Suspension: leaf spring Rear axle: double tires; differential lock; Max. axle load: 11500 kg; Tire profile left inside: 20%; Tire profile left outside: 20%; Tire profile right inside: 20%; Tire profile right outside: 20%; Suspension: air suspension Condition Technical condition: very good Visual condition: very good Damage: none Further information Contact Bas Wolfs or Bas Wolfs for more information.

Condition: used, Electric pedestrian stacker, pedestrian stacker JUNGHEINRICH type EJC 14G-115-290ZT Series. No. 80582366 Year of construction 1997 Nominal load capacity 1400 kg Nominal lift height 2900 mm Fork length 1150 mm Overall length 2000 mm Overall width 850 mm Overall height 1900 mm Operating voltage 24 Volt Dkeln Ugjupbfwsk Tsl - Duplex mast without free lift - 5721 operating hours read off - Battery from year of manufacture 2014, type 24 V 3PzS 345 (24Volt / 345 Ah) - Jungheinrich automatic charger - New TÜV inspection UVV Weight 1050 kg good condition

Condition: used, mileage: 20,120 km, power: 115 kW (156.36 HP), fuel type: diesel, gearing type: automatic, axle configuration: 4x2, wheelbase: 3,750 mm, overall weight: 3,500 kg, empty load weight: 2,224 kg, maximum load weight: 1,276 kg, first registration: 09/2023, next inspection (TÜV): 09/2025, loading space length: 3,250 mm, loading space width: 2,040 mm, loading space height: 400 mm, loading space volume: 2 m³, fuel consumption (urban): 579 l/100km, color: white, driver cabin: other, suspension: steel-air, number of seats: 3, total length: 5,790 mm, lifting height: 2,400 mm, Equipment: ABS, air conditioning, cruise control, navigation system, onboard computer, traction control, trailer coupling, CERTIFIED PRE-OWNED Plus, color white IC 194, empty weight: 2224kg, permissible total weight: 3500kg, loading space (L W H): 3,250 mm x 2,040 mm x 400 mm, loading space volume: 2 m³, fabric seats, interior color gray, leaf air suspension, 6 x airbag, trailer hitch ball: trailer load 3500kg, electric stability program ESP, traction control ASR, automatic climate control, navigation system: IVECO HI-CONNECT, automatic distance control ACC with stop and go, voice input system: Amazon Alexa, driver's comfort seat, driver's seat hydraulically dampened, driver's seat height adjustable, driver's armrest, passenger seat bench 2 people: with storage, LED headlights, automatic headlights, headlight range adjustment, radio, digital radio reception DAB, multi-function display, AUX & USB connection, Bluetooth Audio streaming, Bluetooth mobile phone preparation, rain sensor, multifunction leather steering wheel, power steering, adjustable steering column, driver's lumbar support, 16-inch alloy wheels, 2 electric windows, outside temperature display, fog lights: with cornering light function, electric and heated outside mirrors, wide-angle mirror, immobilizer, central locking. with remote control, tinted glass, storage package, hill start assist, LED daytime running lights, 1x13-pin connector, cup holder, cornering light, telematics system preparation, crosswind assistant, light sensor, smartphone app integration, speed limiter: 160 km/h, touchscreen operation, emergency brake assistant, traffic jam assistant, 8-speed automatic converter (ZF), rear axle air suspension, 12V 13-pin trailer socket, 170cc air conditioning compressor, electronic parking brake, storage compartment above the windscreen, comfort headrests, steering with city function, start/stop system, heated fuel filter, storage compartment under passenger seat, 20-liter AdBlue tank, 90-liter fuel tank, payload, VEHICLE LOCATION, 90441 NUREMBERG, DIESELSTR. 65, your contact, Mr. Bächer, Tel. , financing possible, errors and changes reserved. Dkoln Uov Hiu Esgk Tel

Condition: used, mileage: 256,178 km, power: 419 kW (569.68 HP), first registration: 07/2020, overall weight: 18,000 kg, fuel type: diesel, color: white, axle configuration: 4x2, maximum load weight: 10,057 kg, empty load weight: 7,943 kg, tire size: 385/65 r 22,5 u. 315/80 r 22,5, fuel: diesel, wheelbase: 3,800 mm, brakes: intarder, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: air/air, Year of construction: 2020, machine/vehicle number: 28582, Equipment: ABS, air conditioning, cruise control, differential lock, hydraulics, navigation system, onboard computer, parking heater, soot filter, traction control, Vehicle number # 28582 * Euro 6 * Active Space w. 1 couch * Intarder * Full air suspension * 385/65 R 22.5 and 315/80 R 22.5 tires * Wheelbase 3,800 mm * 700 ltr. tank * Diff. lock * HI-Tronix automatic transmission * PTO * Double tipping hydraulics tipping hydraulics Deln Ujmv Rmtsgk Tekl * Cruise control * Traction control * Climate control seat/heated * Passenger swing seat/heated * 1 couch * Refrigerator * Electric roof hatch * Leather interior * Infotianment system incl. navigation * ACC adaptive cruise control * LDWS Lane Departure Warning System * AEBS Emergency Brake Assist * Eco Roll * Rain sensor * Hill start assist * FH air suspension * Diesel particulate filter * LED daytime running lights * Fog/working lights * Electric FH 2-fold * Electric exterior mirrors/heated * Axle load indicator * Rocking mode * Multifunction leather steering wheel * On-board computer * CB radio * Rotating beacons * Air horns * Safety Lock * Sun visor * ZV w. remote control * Reversing alarm * Cornering/turning light * Tire pressure monitoring * Roller blind left and right Leasing or financing possible on request !!!

Condition: excellent (used), mileage: 196,000 km, power: 331 kW (450.03 HP), fuel type: diesel, axle configuration: 6x2, fuel: diesel, brakes: retarder, gearing type: automatic, emission class: euro6, suspension: air, loading space width: 2,550 mm, loading space length: 6,450 mm, Year of construction: 2017, operating hours: 3,613 h, Equipment: ABS, air conditioning, cruise control, navigation system, parking heater, retarder, trailer coupling, = More options and accessories = Djln Ugjutvmwok Tskl - Aluminium fuel tank - Electric windows - Electrically adjustable exterior mirrors - Low noise - Speed limiter - Refrigerator - Alloy wheels - Air suspension - Radio/CD player - Reversing camera - Sunshade - Auxiliary heating - Toolbox - Xenon lighting - Power take-off (PTO) - Central lubrication - Central locking - Tow bar = More information = General information Year of manufacture: Oct. 2017 Axle configuration Suspension: Air suspension Front axle: LM rims; Steered Rear axle 1: LM rims Rear axle 2: LM rims Weights Empty weight: 18,535 kg Payload: 10,465 kg GVW: 29,000 kg Functional Crane: FASSI F 425 RA.2.25 E- Dynamic + JIB, built in 2017, behind the cabin Brand of the body: FASSI F 425 RA.2.25 E- Dynamic + JIB CE marking: yes Condition Technical condition: very good Visual condition: very good

Condition: new, Year of construction: 2022, All-round sheet fiber laser metal cutting machine Equipped with automatic functions of nozzle changing and one-click processing, P-Series is competent for all cutting demands. Flake graphite in the cutting machine bed improves greatly the shock absorption and wear resistance, and residual stress almost disappears after age hardening, therefore, precision and lifetime of the equipment are improved, and costs saved. The special fiber laser nozzle and cutting process ensure faster carbon steel oxygen cutting, more gas-saving low-pressure stainless steel nitrogen cutting, and better-quality carbon steel air cutting. Fiber laser heads are able to detect jutting obstacles to effectively reduce the damage rate and save the maintenance cost of a laser cutter. The fully closed-loop control adjusts according to feedback to ensure that the actual motion position is consistent with the theoretical input value. With One-click Processing, one laser cutter is able to process multiple sheets in batches with a one-off setup, achieving batch processing. Condition: New Laser Type: Fiber Laser Laser Power: 1500W - 30000W Cutting Area: 3048*1524mm - 6100*2500mm Cutting Speed: 0-169m/min Dkjln Ugkeh S H R Sj Tel Positioning accuracy: ±0.03mm - ±0.05mm Repositioning accuracy: ±0.02mm - ±0.03mm Graphic Format Supported: AI, BMP, Dst, Dwg, DXF, DXP, LAS, PLT CNC or Not: Yes Cooling Mode: WATER COOLING

Condition: used, mileage: 116,183 km, power: 132 kW (179.47 HP), first registration: 02/2013, overall weight: 8,000 kg, fuel type: diesel, color: white, axle configuration: 4x2, maximum load weight: 2,850 kg, empty load weight: 5,150 kg, wheelbase: 3,105 mm, gearing type: automatic, emission class: euro5, suspension: steel-air, Equipment: ABS, air conditioning, low noise, Tare: 5150kg, Total Allowable Weight: 8000kg, Cloth Seats, Air Leaf Suspension, Digital Tachograph, Low Noise: EEC 92/97, Passenger Bench 2 persons, Radio, Power Windows, Underrun Bar: Front, Spare Wheel, Speed Limiter, Antisplash, COMPACTOR Dkslnsi Dvbgo Ugk Tsl

Condition: used, Year of construction: 2002, x-travel 1.600 mm y-travel 1.250 mm z-travel 1.000 mm Deln Ugksvuurxo Tekl Control HEIDENHAIN TNCi 530 tool taper HSK-A63 spindle turning speed range 18.000 U/min table dimension - cross 1.250 mm table dimension - longitudinal 1.500 mm rapid traverse 60 m/min feed 20-15.000 mm/min workpiece weight 4.000 kg table turning speeds 10 U/min Tools changer 60 pos. handwheel el. Machine on 49.248 Spindle hours 13.157 weight of the machine ca. 34 t dimensions of the machine ca. 8.800 x 8.800 x 3.500 mm he DMU 160P is in very good condition and can be inspected under power at the seller's premises. under power at the seller's premises. The machine has mainly been used to mill plastic and otherwise aluminium. Description: Spindle HSK63 18.000 1/min approx. 1.000h Minimum lubrication inside/outside Blowing air inside/outside coolant from the outside Tool magazine 60-fold Measuring probe Heidenhain Control Heidenhain TNCi 530 Operating mode 4 Electronic handwheel Repair: --> Tool change unit and the Z-curtain replaced in 2022.

Condition: used, Injector with brine mixer Manufacturer: Inject Star Model: BI-124-C-P Made of stainless steel Number of needles: 124 Productivity: 5500 kg/h max Dolnjvzaaus Ugk Tokl Electric power: 5.6 kW Voltage: 400V 50Hz Brine mixer Model: CLB-800 Volume: 800 liters Electric power: 5kW Voltage: 400V 50Hz Touch screen computer control Double cooling Glass gauge for fluid level measuring

Condition: used, color: other, first registration: 06/2024, Year of construction: 2024, Serial number: ID1-H102/ID2-SN4218/ID3-10006/ID4- Dolneuzhb Rs Ugk Tekl We have a stock of >100 axles. Please contact us if you can't find what you are looking for.

Year of construction: 2023, Condition: new, ZERO BACKLASH POWER TRAIN The concept of the power train is an important step to a high quality spline. Therefore all Pee-Wee Spline Rolling Machines have a zero backlash drive system in combination with vibration absorbent material and design. AC-Servo Technology allows fast and easy set-ups in combination with our software. PEE-WEE - machines from the Spline range are used for the economical, chip-less cold forming of external toothing, spline shaft profiles, involute profiles (DIN 5480, DIN 5481) for example, on transmission shafts, drive shafts, plug shafts, (also hollow shafts), etc. Multiple gears may also be positioned relative to each other. Depending on the type of machine and size of teeth, multiple different profiles can be produced in one clamping process. Due to the optimised forming tool design and tool arrangement, an improved insertion of the contour takes place, which can be simpler and more cost-effective compared to known production methods. At the same time, greater production flexibility is achieved. Splines according to DIN 5480 and DIN 5481, as well as special splines can be rolled in infeed and continuous process. Doljfu S Tfon Ugk Tjkl

Condition: new, Year of construction: 2022, All-round sheet fiber laser metal cutting machine Equipped with automatic functions of nozzle changing and one-click processing, P-Series is competent for all cutting demands. Flake graphite in the cutting machine bed improves greatly the shock absorption and wear resistance, and residual stress almost disappears after age hardening, therefore, precision and lifetime of the equipment are improved, and costs saved. The special fiber laser nozzle and cutting process ensure faster carbon steel oxygen cutting, more gas-saving low-pressure stainless steel nitrogen cutting, and better-quality carbon steel air cutting. Dkeln Ugohv U Tqsk Tel Fiber laser heads are able to detect jutting obstacles to effectively reduce the damage rate and save the maintenance cost of a laser cutter. The fully closed-loop control adjusts according to feedback to ensure that the actual motion position is consistent with the theoretical input value. With One-click Processing, one laser cutter is able to process multiple sheets in batches with a one-off setup, achieving batch processing. Condition: New Laser Type: Fiber Laser Laser Power: 1500W - 30000W Cutting Area: 3048*1524mm - 6100*2500mm Cutting Speed: 0-169m/min Positioning accuracy: ±0.03mm - ±0.05mm Repositioning accuracy: ±0.02mm - ±0.03mm Graphic Format Supported: AI, BMP, Dst, Dwg, DXF, DXP, LAS, PLT CNC or Not: Yes Cooling Mode: WATER COOLING

Condition: used, color: other, first registration: 06/2024, Year of construction: 2024, Serial number: ID1-H102/ID2-SN4218/ID3-10006/ID4- Dkjlouzhbdsn Ugk Tel We have a stock of >100 axles. Please contact us if you can't find what you are looking for.