Used Pegas Gonda 600 Camel X-Cnc-1000 for sale (66,649)

Condition: excellent (used), Numerical Control Power Control + Software Cadmatic 4 Professional No. 1 Infeed roller tracks (ca.) 32,000 mm Lifting table (mm) 5600 x 2200 Cgsb Ey Rjvnq H Eecqet VAC loader (sliding bridge) with fan suction for loading special or delicate panels 1° Rear-pusher, with No. 6 clamps/grippers Turning device (rotating unit) at 90° 1° Panel Saw - Max cutting width mm 5600 (cutting line with air cushion) Max blade projection (mm) 190 Scoring Unit (max. diameter saw / power) mm 200 (Kw 2,2) Main Sawing Unit (max. diameter saw / power) mm 600 ( Kw 36) Adjustable speed of the saw carriage (QS) (m/min) 1 - 130 m/min 2° Rear-pusher, with No. 14 clamps/grippers 2° Panel Saw - Max cutting width mm 2200 (cutting line with air cushion) Max blade projection (mm) 190 Scoring Unit (max. diameter saw / power) mm 200 (Kw 2,2) Main Sawing Unit (max. diameter saw / power) mm 600 (Kw 36) Adjustable speed of the saw carriage (QS) (m/min) 1 - 130 m/min Waste evacuation system with grinder (Kw 19.5) No. 2 Front supporting tables with Air blowing system (mm 800 x 2160) Plastic wheels coated with special material to avoid scratching delicate panels Automatic unloading System of the cut panels: N° 2 x Liftomat HAU-A 25/12 Automatic Stacking System with 8 stations

Condition: excellent (used), Tuscan LC38 x 3000mm CNC Lathe Swing Over Bed 970mm Swing Over Cross Slide 420mm Centre Height 490mm Distance Between Centres 3000mm 12 Station Duplimatic Turret Tailstock Boring Bat Attachment Boring Bar 2 x 3 Point Fixed Steady 1 x Travelling Steady Csb Esvtw Imey Rcqsgt Fanuc OiTC Control C Axis & Driven Tools Serial Number LC223806086 Year 2010 /10

Condition: excellent (used), Year of construction: 1997, Manufacturer SAEILO (Germany) Model CONTUR TV 1000 Year of issue 1997 Control system HEIDENHAIN X/Y/Z-axis movement 1016 / 610 / 508 mm Table size 1080 x 580 mm Max. Table load 600 kg Tool change 40 Spindle taper SK 40 Cutting feed speed X / Y / Z 0.25 to 5080 mm/min Cgeb Eysugltxj Rcqjt Rapid traverse X / Y / Z 20000 mm/min Rapid traverse Z 1500 mm/min Spindle speed 5-8000 rpm Spindle power 11 / 16.5 kW Machine weight 6000 kg

Condition: excellent (used), Year of construction: 2000, Dreh-Øüber Bett 320 mm Dreh-Øüber Support 185 mm turning length 1000 mm Spindelbohrungs -Ø/ Aufnahme 32 mm mm spindle turning speed range (12) 85 - 2000 U/min feeds - longitudinal 0,006 - 1,77 mm/min feeds - cross 0,003 - 0,888 mm/min thread - mm pitch 0,1 - 28 mm thread - module 0,1 - 1,75 mm Cjb Eyetv Iibj Rcqegt thread - inch 2,5 - 75 inch. voltage 400 V / 50 Hz power capacity 2,2 kW weight of the machine ca. 0.8 t dimensions of the machine ca. 1,8 x 0,8 x 1,4 m Quick-change toolholder with 5 cassettes, fixed steady, 3-jaw chuck Ø 200 mm, coolant device,

Condition: ready for operation (used), CNC milling center YANG EAGLE 1000 with 20-fold tool changer x / y / z 900 x 500 x 500 mm Csb Ey Rcehlp Nuoqsgt Fanuc Series O-MD Type: SMV-1000 Model: C & H-3A UNIT FAN: 100 VA Shipping possible throughout Germany and Austria. Surcharge 1000 € Sale excluding warranty.

Condition: new, Wide span shelving / Basic shelving / 2550x2500x600 WxHxD Wide span shelving, new Dimensions: L 2550 x H 2500 x D 600 mm incl. 4 shelves Shelf load: ~ 250 kg with evenly distributed load #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# Basic shelving consisting of: 2x shelf uprights, 600x2500mm unassembled, incl. cross and diagonal braces, plastic base plates 8x crossbars 2450mm, Cgob Ey Rcjcfbzceqjt incl. locking pins 4x shelves 2430x545mm, Thickness: 22 mm

Condition: good (used), Clamping table, clamping angle, T-slot table, round table, milling machine table, turning table, cross table, cross-sliding table, boring table -Manufacturer: Scharmann, clamping table drilling table rotatable -Table surface: 1400 x 1000 mm -Travel distance: 1200 mm -Grooves: 7 pieces 22 mm -Dimensions: see photo Cgjb Eyjpyk Ize Rcqet -Total dimensions: 3410/1350/H665 mm -Weight: 4600 kg

Year of construction: 2022, Condition: as good as new (ex-display), The cast-iron machine frame features superior rigidity and torsional strength, precision guideways and excellent machining quality All guideways are lubricated reliably via a central lubrication system The workspace is protected by an easily accessible enclosure A powerful coolant pump is combined with a vacuum exhaust unit to clear grinding dust and aerosol during machining operations All required parameters for precise grinding spindle feeds are entered and edited via the Siemens touchscreen The high-quality preloaded ball screw and a powerful servo-motor ensure high precision and repeatability of positioning on the Y-axis The machine features an electronic hand-wheel for configuration tasks and manual movement of the grinding spindle If set to Auto mode, the user-defined roughing and finishing parameters, number of spark-out strokes, and return to zero are automatically processed Grinding spindle Large grinding spindle, dynamically balanced, completely sealed with permanent lubrication Preloaded precision-bearings ensure maximum grinding performance and high reliability over many production hours Programming The high-quality preloaded ball screw and a powerful servo-motor ensure high precision and repeatability of positioning on the Y -axis The machine features an electronic hand-wheel for configuration tasks and manual movement of the grinding spindle If set to Auto mode, the user-defined roughing and finishing parameters, number of spark-out strokes, and return to zero are automatically processed Hydraulics Extremely quiet operation and minimal heat build-up for optimum work results under continuous operating conditions Hydraulically operated linear table movement, infinitely variable, high consistency, and soft reversal of direction External hydraulic unit with oil cooler unit ensures perfect temperature stability Magnetic clamping plate A large magnetic setup plate is included and ensures torsion-free clamping, long tool life and high reliability The control unit is integrated into the electric system to simplify operation, allowing quick clamping and degaussing for maximum production efficiency Workpiece weight (max.) 270 kg Spindle nose-to-table surface distance 580 mm Table dimensions 635x305 mm Dimensions magnetic clamping plate 600x300 mm Scale ring division Y-axis 0,005 mm Scale ring division Z-axis 0,02 mm Autom. transverse feed Z-axis 0,1 - 8 mm Speed 1.450 1/min Autom. vertical feed 0,005 - 0,05 mm TravelsTravel X-axis 765 mm Travel Y-axis 340 mm Ceb Ey Rsf Hmr Ajcqogt FeedHydr. feed X-axis 7 - 23 m/min Rapid feed Y-axis 480 mm/min Rapid feed Z-axis 990 mm/min Drive capacity Motor rating main drive 4 kW Measures and weights Grinding wheel dimensions 350x40x127 mm Overall dimensions (length x width x height) 2,9x2,2x1,9 m Weight 2.800 kg

Year of construction: 1990, Condition: ready for operation (used), Travel X/Y/Z: 600mm/450mm/500mm, spindle mount: ISO40, spindle speed: 3150rpm, feed: 3m/min, rapid traverse: 4m/min, connected load: 21kVA, weight: approx. 3300kg, operating hours: 29189h. Documentation available. On-site inspection is possible. Ceb Eevg Hlnjy Rcqogt

Condition: excellent (used), Year of construction: 2006, operating hours: 10,542 h, Functionality: fully functional, clamping force: 10 kN, screw diameter: 160 mm, clearance between the columns: 1,090 mm, displacement volume: 14,654 cm³, injection pressure: 1,250 bar, injection weight: 15,970 g, opening stroke: 1,200 mm, plate width: 1,628 mm, plate height: 1,580 mm, total length: 15,300 mm, total width: 3,700 mm, total height: 4,300 mm, overall weight: 63,000 kg, heating capacity: 110 kW (149.56 HP), pump power: 155,000 W, input voltage: 400 V, Equipment: documentation/manual, Closing force: 1000 T Between columns: 1090 x 1090 mm Opening stroke: 1100 mm Mold thickness: 500-1100 mm Screw diameter : 160 mm Injectable volume: 14654 cm3 Cgob Eyolcdk Es Rcqst PVC injectable weight: 15970 gr Injection pressure: 1250 bars Pump power: 45 + 55 +55 kw Oil tank: 3050 L Machine dimensions: 15.3 x 3.7 x 4.3 + DAL MASCHIO robot Machine dismantled, transport by 3 trucks: -20T -22.3T -20.5T Charging included

Condition: new, Functionality: fully functional, Year of construction: 2022, New wear parts for single-toggle jaw crusher Böhringer 1000 x 700 (crushing jaws, side wedges, pressure plates) Cgsb Eouhd U Dsy Rcqot

Condition: used, Year of construction: 1971, sheet width 1000 mm plate thickness 6 mm pre-bending 5 mm diameter of lower rolls 130 mm diameter of upper rolls 130 mm Ceb Ejvxw Ikey Rcqogt side roll diameter 100 mm 6,0 kW 1,95 t 2,5 x 1,4 x 1,0 mm - 4 roll round bending machine - Conical bending device - Induction hardened rollers

Condition: good (used), Year of construction: 2017, V304 plate processing machine (including 1 gantry beam(s) of 6.500mm and side trucks) ◼ This V304 plate processing machine is capable of processing plates up to 3.050mm x 18.000mm for bevel plasma cutting and marking (needle marker, if attached) and 4.100 x 18.000 mm for oxy-fuel cutting and marking (needle marker, if attached) ◼ X-rail (21.000mm on both sides of the machine, including double linear guides, helical rack and pinion system and rubber covering band) ◼ Plasma cutting and extraction table (4.300mm x 18.720mm, 2 channel(s), 1 pcs, suitable for ≥ 350A cutting) ◼ Position 1: Plasma cutting unit Kjellberg SmartFocus400 (1 pcs, automatic gas console, complete with cutting parameter database) ◼ Plasma 3D bevel unit (1 pcs, including 5 NC-axis, Voortman height control, intelligent torch positioning system and 3D collision sensor, for x- ,y- , k- and v-weld preparations) ◼ Driven suspension (1 pcs, servo motor driven, including laser pointer) ◼ Dross inhibitor (1 pcs, including 1,2L reservoir) ◼ Arc Glare protection (1 pcs) ◼ Position 2: Plasma cutting unit Kjellberg SmartFocus400 (1 pcs, automatic gas console, complete with cutting parameter database) ◼ Plasma 3D bevel unit (1 pcs, including 5 NC-axis, Voortman height control, intelligent torch positioning system and 3D collision sensor, for x- ,y- , k- and v-weld preparations) ◼ Dragged suspension (1 pcs, with automatic addressing) ◼ Dross inhibitor (1 pcs, including 1,2L reservoir) ◼ Arc Glare protection (1 pcs) ◼ Position 3: Oxy-fuel cutting torch 4.0 (1 pcs, automatic gas console, ignition and piercing, complete with cutting parameter database) ◼ Voortman height control (1 pcs, capacitive height control) ◼ Dragged suspension (1 pcs, with automatic addressing) Cob Eyovpalaj Rcqogt ◼ Position 4: Oxy-fuel cutting torch 4.0 (1 pcs, automatic gas console, ignition and piercing, complete with cutting parameter database) ◼ Voortman height control (1 pcs, capacitive height control) ◼ Dragged suspension (1 pcs, with automatic addressing) ◼ Position 5: Oxy-fuel cutting torch 4.0 (1 pcs, automatic gas console, ignition and piercing, complete with cutting parameter database) ◼ Voortman height control (1 pcs, capacitive height control) ◼ Dragged suspension (1 pcs, with automatic addressing) ◼ Cables high instead of low ◼ Donaldson fume extraction unit DFO 4-48 - 200L (incl. frequency controller) ◼ Air conditioning for switch panel (up to an ambient air temperature of 55°C) ◼ Hardware and software (includes VACAM ‘Machine Edition’, VACAM ‘Office Edition’, VACAD editor software module, VANEST nesting software, Layout marking software module, online support) ◼ Post processor for SigmaNEST (SigmaNEST is provided by the customer) ◼ Safety devices (safety bumpers, emergency stop cord)

Condition: used, Year of construction: 1999, conveyor belt, belt conveyor, transport belt, belt conveyor, steep conveyor, steep conveyor belt, chip conveyor, chip conveyor belt -Manufacturer: Paal's, conveyor belt conveyor belt with container structure -Speed: 25 m/min -Conveyor belt width: 960 mm -Conveyor belt length: 2800 mm -Conveyor belt drum: Ø 170 mm x 1040 mm -Motor/gearbox: SEW-Eurodrive 1.1 kW Cgob Eyetlzdxo Rcqot -Total dimensions: 3050/1450/H1500 mm -Weight: 540 kg

Year of construction: 2003, Condition: ready for operation (used), There are five injection moulding machines Arburg available. 1) Arburg 320C 600-250, year of construction: 2001, operating hours: 83,365h. 2) Arburg 420C 1000-250, year of manufacture: 2001, operating hours: 90,769h. 3) Arburg 270C 300-100, year of construction: 1999, operating hours: 78,784h. 4) Arburg 320C 300-100, year of construction: 2000, operating hours: 78,784h. 5) Arburg 270C 300-100, year of construction: 2007, operating hours: 59,885h. Cebetyyn He Ey Rcqegt

Year of construction: 1992, Condition: good (used), machine/vehicle number: 03.323.36002, Lg.No. 22621 Technical data: - max. working length 3500 mm - column passage 3050 mm - max pressing force 2000 kN - max distance table / ram 480 mm - column throat 260 mm - ram stroke approx. 300 mm - Stroke speeds - downward speed idle max. 100 mm/sec - Upward speed 80 mm/sec Csb Ey Roip Nikocqogt - Downward press speed max. 10 mm/sec - Total drive power 25 kW - Space requirement approx. W 4500 x H 3150 x D 2100 mm - weight approx. 16000 kg - with: - CNC - control CYBELEC renewed in 2008 - controlled crowning device - controlled backgauge with height adjustment 5 - 1000 mm - hydr. tool clamping - upper tool + universal die tool - material supports - two-hand control panel

Condition: good (used), “Hammermill 600 x 900” for Sale Roll Dia.: 600mm Roll Width: 900mm Included: – Electrical motor 132 kW – Unused spare-parts (Screens, Screenholders and Hammers) Cgob Eohct Hijy Rcqet Hammermill will be overhauled, sandblasted and painted.

Condition: new, turning diameter over bed 280 mm turning diameter over slide rest 158 mm turning length 600 mm turning speeds 45 - 2000 U/min centre height 140 mm spindle bore 26 mm tailstock quill taper MT 2 tailstock quill stroke 60 mm metric threading 0,25 - 2,5 mm thread - inch 6 - 96 TPI connected load frequency 230 V total power requirement 0,75 kW weight of the machine ca. 0,16 t dimensions of the machine ca. 1,26 x 0,58 x 0,60 m Professional metal lathe, gearing machine - 3-jaw chuck - 4-jaw chuck Cgeb Ey Rcjvu Hanoqjt - hardened bed tracks - Clamping plate - 4-way chisel holder - Feed protection - standing and rotating bezel - Splash guard - Machine light

Condition: good (used), Year of construction: 2012, Vernet Behringer HD-X 918 / HBP 410/923 CNC Sawing / Drilling Line – Year 2012. 3 Spindle. Automatic tool changer. 24 metres infeed. 18 metres outfeed. Gripper Feed measuring system. Infeed and outfeed Cross Transfers. Cjb Eysvn Uv Re Rcqogt

Condition: used, C-shaped screw clamp, screw clamps, steel construction clamps, clamps, clamping tools -Manufacturer: Holex, malleable cast iron screw clamp 600 x 120 mm -Article No.: Hoffmann 860100 600 -Wingspan: approx. 600 mm Cgob Eyer R Abho Rcqet -Clamping depth: approx. 120 mm -Number: 3x screw clamp available -Price per piece -Dimensions: 700/190/H40 mm -Weight: 3.1 kg/piece

Year of construction: 2013, Condition: ready for operation (used), Travel X/Y/Z: 2000mm/1000mm/650mm, axes: 5, spindle power: 10kW, speed: 27000rpm, control: Siemens Sinumerik 840 DSL, weight: approx. 7000kg. An on-site inspection is possible. Cjb Esugmxijy Rcqegt

Condition: good (used), machine/vehicle number: 21494, OFFER 21494 Technical data: Cgjb Eyehii R De Rcqot - Clamping surface approx. L 900 x D 600 mm - Table height 480 mm - Circumferential water channel - 3 pieces T - grooves M 16 L 900 mm - lateral flange plate - Space requirement L 1000 x D 760 x H 480 mm - Weight approx. 300 kg

Year of construction: 1980, Condition: ready for operation (used), Travel X/Y/Z: 600mm/400mm/400mm, rapid traverse X/Y/Z: 3/2.5/2.5m/min, spindle speed: 8000rpm. Table dimensions X/Y: approx. 1150mm/250mm, dimensions X/Y/Z: approx. 2100mm/3000mm/1900mm, weight: approx. 2100kg. Machine switches on, but shows an error message. An inspection is possible. Csb Eyor Hciyo Rcqegt

Year of construction: 2017, Condition: ready for operation (used), Travel X/Y/Z: 600mm/560mm/510mm, accuracy X/Y/Z: 6µm, rapid traverse X/Y/Z: 30m/min, max. feed force: 5kN, max. feed: 30m/min, table dimensions X/Y: 900mm/560mm, max. table load: 600kg. Spindle speed: 12000rpm, drive power: 13kW, torque: 82Nm. Tool positions: 30, max. tool diameter free/occupied: 130mm/80mm, max. tool length: 300mm, max. tool weight: 8kg. Machine dimensions X/Y/Z: approx. 3050mm/3500mm/2950mm, weight: approx. 5000kg, operating hours: 59667h, spindle hours: 16074h. Including internal coolant supply. Documentation available. On-site inspection is possible. Cgeb Ey Rsu H H Igscqot

Year of construction: 1986, Condition: ready for operation (used), Travel: 1000mm/560mm/1100mm, tool holder: ISO 50, quill stroke: 125mm, speed: 2000rpm, feed: 3000mm/min, rapid traverse: 6m/min, max. workpiece weight: 800kg. Machine dimensions X/Y/Z: approx. 1020mm/1700mm/2650mm, weight: approx. 7100kg, CNC 432 control, operating hours: 70771h. Documentation available. Csbot Tfago Ey Rcqjgt