Used Pegas Gonda 600 Camel X for sale (60,338)

Condition: ready for operation (used), Year of construction: 2007, Functionality: fully functional, working height: 520 mm, input voltage: 400 V, type of input current: AC, Lisec IG line for maximum unit sizes of 3500 x 2500 mm, consisting of following machines: RTVB-32/2WE, washing machine inlet conveyor, year 2007 RTL-25VN, glass washing machine with 6 brushes for low-e, 1 hot water tank, 1 sand filter, and blower, year 2007 RTVB-16/25ST, washing machine outlet conveyor, year 2007 Felqjwbqdcsxnyrsgb RSVN-35/25, frame set section, year 2007 RTVB-15/25ST, extension conveyor for measuring section, year 2007 RTVB-15/25MZU2, measuring section for gas filling press, year 2007 FPS-35/25U2, gas filling press for Argon, year 2007 RTVB-15/25ST, press outlet conveyor, year 2007 UKL-35/25, tilt table, year 2007 As an option a sealing robot for maximum unit sizes of 3500 x 2000 mm would be available: RTVN-15/20VFE, sealing robot inlet conveyor, year 2003 VL-1/20, automatic sealing machine for double and triple glass units, year 2003 DOS-1PTH, mix and metering station for PS, 200 litre base material and 20 litre for catalyst, year 2003 KHB-30, freezing unit, year 2007 The machines are in good working order and would be available within 4-6 weeks from order.

Condition: refurbished (used), Year of construction: 2016, Functionality: fully functional, machine/vehicle number: 6099 TAV 14000, ROTARY CUTTING LINE WITH DIGITAL PUSH-STOP & AUTOMATIC UNLOADER STROMAB Brand: Saw Model: CT 600 with MATRIX Serial No. 6099 TAV 14000 Year 2016 Automatic unloader Serial No. 260163 (Photos taken before overhaul, functional testing, and cleaning) MAKING CAPACITIES: - Production direction: right to left - Minimum wood section (thickness x width): 10 x 30 mm - Input lengths: 1.00 to 13.00 m - Blade speed: 2560 rpm (external speed: 6 m/min) - Maximum pusher speed: 90 m/min (forward or reverse) - Extended table pivot: -/+70° Rotation speed: 1.3 sec POSITION A: for height optimization (thickness) - 0° cut: max. 200x220 or min. 80x360 mm - +/- 45° cut: max. 200x150 or min. 80x250 mm - +/- 70° cut: max. 200x70 or min. 80x120 mm POSITION B: for width optimization - 0° cut: max. 160x310 or min. 80x390 mm - +/- 45° cut: max. 160x220 or min. 80x270 mm - +/- 70° cut: max. 160x160 or min. 80x130 mm COMPOSITION OF THE ASSEMBLY: 1) Numerically controlled pusher-stop Rack and pinion feed system Position reading Accuracy +/- 0.4 mm We also offer this vacuum lifter (here) 2) Cutting unit - Digital touchscreen control panel Direct cutting list entry via the programmer, USB port, or Ethernet port BTL file interface XML program format - Cover with gas lift struts - Table height (working height) 1020 mm - Maximum saw blade diameter 600 mm, bore diameter 30 mm - Vertical pressure plates for small cuts (see illustration) 3) Automatic unloader on the left with storage magazine - 5.30 m feed belt, variable speed, 300 mm wide - Collection table dimensions 5 x 1.5 m, free-roller ramps - Part sorting stations: 3 adjustable position expulsion cylinders - A thermal transfer labeler for self-adhesive labels on 300 m wax paper OTHER FEATURES: - General power supply 400V. Three-phase 50 Hz IN 22 A - Saw motor power 7.5 kW (10 hp) - Pneumatic supply 8 bar max. Consumption 14 Nl/min - Suction: 1xØ100 & 1xØ120 mm inlets Felqov Tzz Dsxnyregb Recommended flow rate 2600 m3/h, minimum speed 20 m/sec - CE marking - Lockable disconnect switch, emergency stops Installation footprint 24.20 m Transportation dimensions (L x W x H): to be specified Weight 2300 kg Unloader 500 kg Machine supplied with a sharpened blade, manual, spare parts list, diagrams, and service keys. Please contact us for the supply of consumables, accessories, and/or suction systems. Upon request, the machine will be serviced, brought into compliance, and include a dynamic functional inspection and test. With a 3-month warranty and certificate of compliance. Ex-store prices exclude VAT. Delivery and additional services available upon request.

Condition: used, mileage: 9,762 km, power: 207 kW (281.44 HP), gearing type: automatic, fuel type: diesel, color: red, overall weight: 14,000 kg, empty load weight: 7,260 kg, maximum load weight: 6,740 kg, tire size: 10R22.5, axle configuration: 4x2, number of seats: 2, first registration: 06/2021, emission class: euro6, suspension: steel, total length: 2,450 mm, total width: 3,200 mm, loading space length: 4,400 mm, loading space width: 2,440 mm, loading space height: 400 mm, driver cabin: day cab, wheelbase: 3,600 mm, Equipment: ABS, air conditioning, cabin, differential lock, trailer coupling, Vehicle location: Bovenden, aluminum body, 1 air seat, 1 bed, rear window, electric mirror, heated mirror, left electric window, right electric window, air conditioning, sun visor, ABS (anti-lock braking system), automatic transmission, differential lock, leaf air suspension, tow bar with air and light, tie-down rails, underbody protection, roof hatch, green environmental sticker. Wheelbase: 3600 mm. Body: Nüssli 3-way tipper, foldable aluminum side walls, rearview camera! ACCESSORIES INFORMATION WITHOUT GUARANTEE. Subject to changes, prior sale, and errors! - . Fgolqowakghexnyrob

Condition: used, Year of construction: 1998, Technical details: x-travel: 600 mm y-travel: 400 mm z-travel: 600 mm table surface area: 750 x 450 mm control: TNC 410 HEIDENHAIN turning speeds: 50 - 8000 U/min tool change unit: 24 tool taper: SK 40 table load: 400 kg rapid traverse: 20 m/min spindle drive: 9 / 12 kW total power requirement: 18 kVA kVA weight of the machine ca.: 3,2 t dimensions of the machine ca.: 2500 x 1600 x 2800 mm incl. IR meashuring system Heidenhain TS 640 inkl. elektr. Handwheel Heidenhain HR 410 inkl. 20 pcs. SK 40 tools tool changer 24 tools ! machine under power for your check Fgeloipwc Toqxnyrjb Our best price for you only € 8.500.- *

Condition: good (used), machine stairs, machine access, machine platform -Machine platform: solid design -Platform: 2455 x 1925 mm with cutout dimensions see photos -Height: 270 mm, additional height 300 mm Folsv E E Hzeqxnyrsgb -Transport dimensions: 2455/1925/H330 mm -Weight: 160 kg

Condition: excellent (used), Year of construction: 1985, Functionality: fully functional, turning diameter over cross slide: 630 mm, spindle bore: 95 mm, turning diameter: 1,200 mm, turning diameter over bed slide: 930 mm, quill diameter: 130 mm, total length: 4,500 mm, total width: 1,750 mm, total height: 1,435 mm, spindle speed (max.): 800 rpm, spindle speed (min.): 8 rpm, overall weight: 5,600 kg, disc diameter: 800 mm, quill mount: MK 6, workpiece weight (max.): 9,000 kg, spindle mount: MK 6, TPK 90 x 2000mm lathe. Manufactured in PORĘBA (PL) - 1985. Renovation 2018. Readings in 3 axes XYZ. Turning diameter over bed 930 mm. Turning diameter over support 630 mm. Turning diameter in bridge 1200 mm. Spindle through hole 95 mm. Spindle speed range 8-800 rpm. Support feed range 80: - longitudinal 0.1 - 12.8 mm/rev. - transverse 0.05 - 6.4 mm/rev. 2-speed motor 15/22 kW. Fgelqxswa S Awjnyrjb Internal Morse taper 6. Weight of the workpiece: - in the chuck 800 kg, - in the centers 6000 kg, - with 1 steady rest 7500 kg, - with 2 steady rests 9000 kg, Max. turning length in the centers 2000 mm. Upper drawer travel 300 mm. Dimensions (length X width X height) 4500 x 1750 x 1435 mm. Weight 5600 kg. Equipment plan-shaft 800 mm, eyepiece 600 mm, half-eyepiece 250 mm.

Condition: used, mileage: 302,000 km, power: 265 kW (360.30 HP), overall weight: 26,000 kg, fuel type: diesel, color: white, axle configuration: 3 axles, brakes: retarder, gearing type: automatic, loading space width: 2,470 mm, loading space length: 6,800 mm, loading space height: 700 mm, Year of construction: 2017, first registration: 03/2017, Equipment: ABS, crane, Mercedes AROCS 2636 / 6x4 PLATFORM 6,80 m + CRANE + REMOTE CONTROL Imported / Accident-FREE IN VERY GOOD CONDITION! ? YEAR OF PRODUCTION: 2017 ? MILAGE: 302 000 km EQUIPMENT: ? ABS ? EL. WINDOWS ? EL MIRRORS ? POWER STEERING ? ENGINE BRAKE ? TACHOGRAPH TIPPER: 680 x 247 x 70 cm (L x W x H) CAPACITY: 13 000 kg TOTAL WEIGHT: 26 000 kg WHEELBASE: 510/135 cm TIRE SIZE: 315/80R22,5 SUSPENSION: SPRING CRANE: HIAB X - HIDUO 188 ES - 4 + REMOTE CONTROL VIN: WDB96421410031638 TEL: * KUBA - POLSKI, ENGLISH, DEUTSCH, ITALIANO * SEBASTIAN - POLSKI, DEUTSCH, ITALIANO, ????? Fgolouhulysqxnyreb * LASZLO - MAGYAR * COSTEL - ROMÂN? (Romana facem toate formalitatile pt export inclusiv nr)

Condition: excellent (used), Year of construction: 1994, Functionality: fully functional, pressing force: 200 t, table width: 1,600 mm, table length: 1,400 mm, ram stroke: 400 mm, working height: 730 mm, Equipment: safety light barrier, Müller Weingarten press line: KE 200-16/14.3.1 - 200 tons KE 300-16/14.2.1 - 300 tons KE 200-16/14.4.1 - 200 tons KE 200-16/14.5.1 - 200 tons The presses have a common housing and fan system. The remaining elements are independent, which will allow you to work on the presses individually. Also, each press is controlled individually Press in very good technical condition for sale from a liquidated press in Poland Modernized in 2018-2023. New Simatic S7 control system and new electrical cabinet. Optical barriers installed. Possibility to check the machine in operation - The press is still connected to the power supply. Fgolqxnev Hqnaeyrob Müller Weingarten press line KE 200-16/14.3.1 - 200 tons KE 300-16/14.2.1 - 300 tons KE 200-16/14.4.1 - 200 tons KE 200-16/14.5.1 - 200 tons The presses have a common covers and fan system. The rest of elements are independent, which allows for individual work on the presses. Also, the control of each press is individual A presses in very good technical condition for sale from a liquidated stamping shop in Poland Modernizes during 2018 -2023 New Simatic S7 control system and new electrical cabinet. Optical barriers installed as well. Possibility to check the machine in operation - The press is still connected to the power supply.

Year of construction: 2018, Condition: as good as new (ex-display), Quiet running, maintenance-free motor Fgeleiiyuqeqxnyrob Laterally closed protective hoods Stable, adjustable workpiece supports High safety comfort due to adjustable spark deflectors Suitable for grinding, deburring and sharpening all kinds of tools, metal profiles, etc. Motor circuit breaker and undervoltage release Spark/eye protection on both sides Connection cable with CEE plug 16 A 1 grinding wheel each coarse and fine Machine stand, emergency stop pushbutton and brake, and suction unit Also other models available from stock! Inquire about the current stock.

Condition: excellent (used), Weiss Type: WK-600/70 (I)-(II) 2 G EEx /22605147 Weiss climate chamber water-cooled (test room explosion-proof) INERTIZATION WITH NITROGEN / EXPLOSION-PROOF TEST ROOM Technical data: Test chamber designation: WK-600/70 (I)-(II) 2 G EEx External dimensions with hinges and door lock Height 1995 mm, width 1090 mm, depth 1660 mm External dimensions without hinges and door lock Height 1995 mm, width 1000 mm, depth 1660 mm Test room capacity: approx. 600 liters Cold / heat operation -70 to 180°C Climate operation 10 – 95°C Humidity 10...98% r. H. Temperature change per time Cooling approx. 2.5 K/min Heating approx. 4 K/min 3/N/PE AC 400V ±10% 50Hz Rated power: 14 kW Rated current: 25 A On-site fuse: 32 A slow-blow Permissible test item weight Total load of the grate supports 80 kg Test room floor 80 kg, grate insert 40 kg Weight: 800 kg Refrigerant: R 404A/R 23 Fgslov Ewy Hoqxnyrsb (The air conditioning system's evaporator has been replaced) For your safety as a buyer, the following information! The following points are carried out in advance on the chambers we offer: 1. Functional check and replacement of necessary components 2. If necessary, new filling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data, information is subject to change!) We are happy to answer any further questions you may have over the phone.

Condition: good (used), Radial fan, dust extraction fan, fan, extraction, dust blower, blower, exhaust fan -Dust extraction fan: radial fan Fgslqxov E D E Njnyrjb -Motor: Dietz 3.0 kW 1420 rpm -Fan wheel: Ø 590 x 160 mm -Volume flow: m³/h -Dimensions:790/710/H790 mm -Weight: 104 kg

Condition: excellent (used), Year of construction: 2009, sheet thickness steel (max.): 2 mm, cutting length (max.): 1,530 mm, Mechanical guillotine shears Fab. Schröder Typ. MHSU 1500/2,0 Year 2009 Technical data Make: Schröder Type: MHSU 1500/2,0 Year of construction: 2009 Effective length: 1530 mm Sheet thickness: 2 mm (400 N/mm) Dimensions: approx. L 1.90 x W 1.30 x H 1.2 m Weight: approx. 840 kg Fslqxnsrm Rpnoyregb Equipment - Manual backgauge 500mm - Hold-down device with hard rubber strip - Sheet holding device mechanically controlled to the rear incl. sheet chute - Rear area protection via light barrier - Support arms 1600 mm - Angle stop 1600 mm All data without guarantee. A demonstration is possible at any time in our showroom.

Condition: used, machine/vehicle number: 26017, Year of construction: 2018, operating hours: 11,902 h, load capacity: 2,500 kg, lifting height: 3,350 mm, fuel type: gas, mast type: standard, construction height: 2,400 mm, Equipment: cabin, sideshift, .: 26017 Fgjlqxnyov Upz Uerob Equipment Details: Year of Manufacture: 2018 Lift Capacity: 2500 kg Lift Height: 3350 mm Operating Hours: 11902 h Mast Type: Standard Mast Height: 2400 mm Length/Width/Height: 2670 / 1310 / 2220 mm Operating Weight: 4480 kg ---- Equipment: * Canopy * 3rd Valve * 4th Valve * Full Cab * Front Work Lights * Rear Work Lights ----- Attachments: * Sideshift ---- Further Equipment Information: Bluespot Flashlight ---- The operating hours are generally based on the readings. We would be happy to offer you the appropriate transport. Another 250-300 forklifts, attachments, and sweepers are available for immediate delivery. Also available for rent! We'd be happy to buy your old one. Do you have any questions? You can reach us during our business hours from 7:30 a.m. to 4:00 p.m. We look forward to hearing from you! We speak English This offer is subject to prior sale and errors. The equipment is sold in its current condition, not refurbished, at the dealership. All information is provided without guarantee, errors, and changes excepted.

Condition: used, Year of construction: 2022, Field of application: Construction Empty weight: 3.074 kg Make of engine: Caterpiller Serial number: KS800131, 132, 133 Delivery terms: EXW Working pressure: 18000 bar Fgolqov Iuxlsxnyrjb Please contact Francisco Pinto, Jeroen Heindryckx, Bart Apers or Matthias Eyckmans for more information * We have 3 x H180GC Hammers available for sale in our stock at present

Year of construction: 2020, Condition: as good as new (ex-display), High performance Belt grinding device height adjustable 0-90°. Maximum usable face grinding area Belt adjustment with fine adjustment Longitudinal stop for material guide Perfectly balanced and low vibration Connection on both sides for dust extraction Ø 50 mm Motor protection switch with undervoltage release Fixed stop 1 Sanding belt standard (brown), grit 80 1 grinding wheel 250 x 40 x 51 mm, grit 80 Spark protection Connection cable with CEE plug with base frame, integrated suction and brake Fjlqsiiywzexnyrjgb Also other models available from stock! Inquire about the current stock.

Condition: good (used), Year of construction: 2008, HEIDENHAIN Manual Plus 4110 control - 3-jaw chuck, 315 mm, with various jaw sets - PARAT 4-station tool holder with 18 inserts - 2-speed electric gearbox - 2 stationary steady rests - 1 follow-on steady rest - Chip conveyor - Manuals - Various other accessories on the accompanying workbench Technical details Turning diameter 500 mm Turning length 1000 mm Turning diameter over the cross slide 340 mm Speed 3000 rpm Spindle bore 93 mm Max. workpiece weight between centers 1000 kg Max. workpiece weight - overhung 500 kg Felqsv I Rdksxnyrjgb Main drive motor 16 kW Total power requirement 17 kW Machine weight approx. 3.6 Space requirement approx. 2.8 x 1.9 x 1.9 m

Condition: ready for operation (used), Storage container Heated Drip tray Fgelev T Rmveqxnyrsb Explosion hatch

Condition: ready for operation (used), Drilling capacity in steel/cast iron: 40mm/60mm, throat depth range: 300mm-1250mm, max. workpiece height: 745mm, spindle mount: MK5, spindle stroke: 355mm, speed: 1200rpm, feed: 756mm/min, column diameter: 300mm, spindle-plate distance: 280mm-1380mm, table dimensions X/Y: 1400mm/750mm. Machine dimensions X/Y/Z: approx. 2200mm/1000mm/2800mm, weight: approx. 3000kg. On-site inspection is possible. Fgslqxswaa Eyonyrjb

Condition: ready for operation (used), Year of construction: 2005, Available immediately from location: Mexpol L&Z Lathe Type TUB 600 Year of manufacture 2005 Center height 320 mm Bed swing 640 mm Bend swing 420 mm Turning length 3000 mm Spindle bore 80 mm Spindle speeds 20 – 2000 rpm Drive power 15 kW Tailstock MT 5 Cross slide travel 315 mm Top slide travel 130 mm Digital display Chuck Lynette Multifix tool holder with inserts Fjljv Uh Dhjqxnyrogb Price: €7,500 plus VAT, ex location

Condition: used, Functionality: unexamined, Ferwood Code: RU0011459 - Manufacturer Code: DTS6201 - Condition: Used - Functionality: Not tested - Compatible Machine: CNC - IMA EDGEBANDER - HOMAG - WEEKE - If interested we offer a revision service, contact us. Fslqov I A Dvoxnyrogb

Condition: used, mileage: 477,000 km, power: 405 kW (550.65 HP), first registration: 07/2018, overall weight: 18,000 kg, color: red, axle configuration: 2 axles, gearing type: automatic, emission class: euro6, Year of construction: 2018, Equipment: ABS, air conditioning, electronic stability program (ESP), parking heater, Volvo FH540 4x2 Lowliner tractor unit with adjustable tractor unit, Euro 6, I-Shift transmission, VEB, Globetrotter cab with 1 bed, 2 tanks, tires 355/50 R 22.5 HA 295/60 R22.5, side spoiler, ACC, Lane Guard lane assistant, collision warning, auxiliary heating, air conditioning, seat heating, differential lock, , refrigerator compartment, roof hatch, radio/CD/AUX, EFH Fgslqxsv Ug R Hsnyrsb

Condition: good (used), Year of construction: 2008, Functionality: fully functional, Equipment: chip conveyor, rotational speed infinitely variable, MORI SEIKI NH5000 DCG horizontal center from 2008 CNC MSX 701 III 2 pallets 500 x 500 14,000 rpm spindle HP coolant center spindle ATC 80 BT 40 tools Chip conveyor Visible in operation in France. Felqxov Ubmpsnyregb

Condition: good (used), Year of construction: 2005, Functionality: fully functional, Only for sale within EU member states! No private sale Fjlqxnyjvta Trjrsgb The tent can be viewed. The tent must be dismantled and loaded by the customer. Any warranty is excluded. We accept no liability for the correctness of the technical data and year of construction, for the completeness of accessories and tools, as well as for compliance with all safety and environmental requirements, mentioned in the accident prevention regulations. Any warranty is excluded. Jl28Yf0Ah2 For the correctness of the technical data and year of construction, for the completeness of accessories and tools Cyn79beasd as well as for compliance with all safety- and environmental-requirements, mentioned in the accident prevention regulations, we take over no guarantee.

Condition: excellent (used), Butt and planer tool holder (2844) for shopping,horizontal shaper shank cross section 34 x 20 mm Fjlqomk Hb Eexnyrjgb in wooden storage box

Year of construction: 2020, Condition: ready for operation (used), Main Drive Spindle speed range 18000 rpm Spindle motor power 3.5 kW Workpiece Workpiece X 8~ 60 mm Workpiece Y 400 ~ 950 mm Workpiece Z 400 ~ 2500 mm Tools Type of tool holder ER 25 Additional Equipment Machine work table fully managed by NC. Folqxnsu Axiuoyregb NC-controlled side aligner for perfect alignment. Masterwork for easy programming. Master Drill: Human-machine interface. Trepan: For manual and equipment operations. Automatic barcode scanner at the infeed Palette CAM start software Motorized roller conveyor for loading workpieces at the infeed This CNC Wood Machining Centre was manufactured in 2020. The Masterwood MASTERDRILL TF 600 SA features dual 3.5 kW milling spindles with a maximum speed of 18,000 rpm and air cooling. It handles workpieces from 400 to 2500 mm in length and 400 to 950 mm in width, with thicknesses from 8 to 60 mm. If you are looking to get high-quality milling capabilities, consider the Masterwood MASTERDRILL TF 600 SA machine we have for sale. Contact us for more information. Application Types Milling (Wood)